Deleted Network Icon in Side Bar. How do I replace. G5 Power Mac

Deleted Network Icon in Side Bar. How do I replace. G5 Power Mac

How about this one. Can't boot from 2nd internal hard drive. Apple logo then Blue Screen. Have run Tech Tool Pro and disk utilities to no availe. Went I open from main drive I see and document Icon and a "~". Is that a mounting point or should I delete it. The second drive is a clone of the Main.

Similar Messages

  • Lost network icon on side bar

    Hello all,
    in my haste of dragging and dropping, I accidently grabbed the Network Icon off the side bar
    (ie. desktop/music/movies etc..) of an opened folder and poof it over the desktop. I tried dragging the icon off my library but I'm getting circle with the cross when trying to drop a new icon on the folder window side bar.
    First question, is if there's another way to drop Network Icon onto the side folder bar or import it to a location for the side bar.
    Second, if there's a way to lock and unlock the side bar.
    Thank for the suggestions in advance.
    <Edited by Moderator>

    Finder > Preferences > Sidebar > click network
    I don't think there's a way to lock the sidebar. I've seen others ask about this and not seen a solution, just people saying you can't.
    I suggest in future you don't post your email address because spam bots will find it. The moderators here will remove it.

  • HT202213 i havent got the devices or the shared icons on my side bar how do i get them on there

    i havent got the devices or the shared icons on my side bar how do i get them to appear there please

    Refer to this article:
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538

  • Accidentally deleted network icon from viewer

    Can anyone help me? I accidentally deleted my network icon from my viewer. When I double click my hard drive the network icon used to be right below the hard drive icon on the far left. I accidentally dragged it out and dropped it. How do I reinstate that?
    Thanks for any help!
    Heartichokeart

    Hi
    Go to the Finder menu, then Preferences. Click on the "Sidebar" tab, and tick the Network entry. It will re-appear in your sidebar.
    Matt

  • I can't delete items in my address bar how to do it is my question

    I can not delete items in my address bar, have tried previous instructions to click onto arrow high light item to be deleted.
    I have press the delete key it seems to delete, but is still there
    when i click on to arrow on address bar HOW TO PERMANENTLY
    DELETE ITEMS IN ADDRESS BAR IS MY QUESTION.
    Thank you

    I'm not sure I understand why you say "I want the excel file storing part outside the case structure".
    From the rest of your description, it sounds like you want to write to file only if something is true. That means that you put the write to file function inside the TRUE case.
    You can pass the file refnum into the case and back out again, if you need to. Pass it straight thru in the FALSE case, and thru the WRITE FILE function in the TRUE case.
    Steve Bird
    Culverson Software - Elegant software that is a pleasure to use.
    Culverson.com
    Blog for (mostly LabVIEW) programmers: Tips And Tricks

  • Lost document folder icon on doc bar how do i find it?

    i lost the document folder for the doc bar, how do i find it? 

    Click Finder icon in the Dock to open Finder window.
    Right click the "Documents" folder in the sidebar and
    select "Add to Dock" from the contextual menu that pops up.
    Best.

  • Accidently deleted "Network" icon in finder

    I Accidently pulled the "Network" icon out of the finder window and now I can't get it back. I can't connect to another computer on my ethernet network. I can't even select "shift apple K" -- nothing comes up.
    G5   Mac OS X (10.4.7)  

    Try...
    Finder>Preferences>Sidebar>Sow these items in Sidbar:, then check Network box.

  • HT1531 how can I update my power mac g5 from 10.4.11 to 10.5?????????

    I have a power mac g5. Its a powerpc processor running 10.4.11 at the moment. Before it crashed and I had it repaired it was running 10.5.8. How can i get back to that version. 10.4 is just simply not working for the applications and etc that I use. I can not even use itunes for goodness sake. Someone please help!!!!!!!
    P.S.
    I currently have no disc. Lost in the process of moving from Miami

    Buy a retail set of installer discs for it.
    Texas Mac Man, Leopard disc sources - https://discussions.apple.com/thread/3636662
    "a brody" post about upgrading to Leopard - https://discussions.apple.com/thread/3373795
    It's a pity you didn't keep a bootable clone of the drive.  The $100 in a backup drive  would have cost less than a replacement Leopard will.

  • How do I get the Power Mac Quicksilver 867mhz software?

    I got the computer at a university surplus sale with no hard drive.  It seems to power on  fine but of course has no OS.  I put a hard drive in it and tried to load OS 10.3.5 from gray discs that came with an Ibook G4 but it said "bundled software cannot be installed on this computer."   The unit originally shipped with some version of OS 9xx.   What OS software will load on this machine to get it going?
    Thanks!!

    Tiger Requirements...
    To use Mac OS X 10.4 Tiger, your Macintosh needs:
        * A PowerPC G3, G4, or G5 processor
        * Built-in FireWire
        * At least 256 MB of RAM (I recommend 1GB minimum)
        * DVD drive (DVD-ROM), Combo (CD-RW/DVD-ROM) or SuperDrive (DVD-R) for installation
        * At least 3 GB of free disk space; 4 GB if you install the XCode 2 Developer Tools  (I recommend 20GB minimum)
    http://support.apple.com/kb/HT1514
    http://www.ebay.com/sch/i.html?_nkw=mac+os+x+tiger+retail+10.4
    See Tom's, (Texas Mac Man), great info on where/how to find/get Tiger...
    https://discussions.apple.com/message/15305521#15305521
    Or Ali Brown's great info on where/how to find/get Tiger...
    http://discussions.apple.com/thread.jspa?messageID=10381710#10381710
    Leopard requirements/10.5.x...
        *  Mac computer with an Intel, PowerPC G5, or PowerPC G4 (867MHz or faster) processor
    minimum system requirements
        * 512MB of memory (I say 1.5GB for PPC at least, 2-3GB minimum for IntelMacs)
        * DVD drive for installation
        * 9GB of available disk space (I say 30GB at least)
    Classic/OS9 Apps no longer supported.
    http://bobskelley.com/2015/01/04/9-reasons-leopard-keeps-power-macs-real-in-2015 /
    Trouble is Apple no longer sells it, check eBay & such for the Retail version, not the Gray Discs...
    http://www.ebay.com/sch/i.html?_nkw=mac+os+x+leopard+retail+10.5

  • How Block Network Icon In Tool bar For Administrator Level

     
      We are using property management system for our manual work,but it can not run user level.So we have to setup it Domain Administrator level.I want to know can we block to users(Administrative) to change Ip Setting...

    Or refer this : http://social.technet.microsoft.com/Forums/windowsserver/en-US/2c6a397b-2fcf-4ea9-b9e7-6a5a9036f17a/completely-restrict-users-from-changing-a-nics-ip-address?forum=winservergen
    Arnav Sharma | http://arnavsharma.net/ Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading
    the thread.

  • Network icons in menu bar depending on location?

    I have two network locations set up; Home where I use a wireless network and Mobile where I use my mobile phone as a modem.
    Is it possible to specify which network status icons I want displayed in the menu bar depending on which location I choose? For Home I would only like the Airport icon displayed, but for Mobile, I'd like to have the bluetooth and modem status.
    12 PowerBook G4   Mac OS X (10.4.7)  

    Not quite what I need.
    What I want is that when I choose the 'Home' location, all that appears on the menu bar is the Airport icon. I don't need the modem and bluetooth icon as I don't use a modem from that location.
    When I choose the Mobile location, all I want to appear on the menu bar is the bluetooth and modem icon as this is what I'll use and won't be needing Airport.
    Having the unused icons in the menu bar takes up valuable space on a 12".

  • Bluetooth icon in menu bar, how to remove?

    I have a Ti 500 PB. I exchanged HD's with my son's Al PB for a while (long story). Well we exchanged HD's back and now I have the bluetooth icon in the menu bar. How do I remove it since in system preferences there is no bluetooth preference to set it up? This PB does not have bluetooth. I am sure there is a terminal command to do this, I didn't see anything in CockTail.

    Click on it with the Command key held down and drag it out of the menu bar.
    (39703)

  • I dont see computers on the network on the side bar in finder

    Hi I am new to mac ( 2 days )
    I am connected to a wireless network with a couple of pc's but I cant see them in the finder bar or any other network items....
    I have enabled sharing on the Pc's and I can see the mac book on them and transfer files etc but cant see anything on the mac book
    I am using OS X snow leopard
    Can anyone help ?

    Assuming that your settings are correct (see above), I decided to change something to see if I could get my smb shares to show up under Shared more consistently. Previously I had problems connecting with my iBook if it went to sleep. And, it too would disappear from Shared if it went to sleep. So, I did my best to keep all the machines from sleeping. Now, no machine has disappeared from Shared unless I let it sleep accidentally or intentionally. Note that there appears to be a positive correlation between (a) a share disappearing and the length of time a it has been asleep and (b) shares disappearing and the numbers of shares asleep. Of, course, this work around requires you to prevent sleeping on machines you think you will want to connect with in the "near" future.

  • Hide .mac status icon from menu bar - how do I do it?

    Title says it all.
    I want to hide the .mac status icon from the menu bar but can't seem to find a setting anywhere.
    Anyone got any ideas/
    Thanks
    Marc

    Hi MarcMc,
    Welcome to Apple Discussions!
    To remove the .Mac sync status indicator from the menu bar, open System Preferences > .Mac, click the Sync tab and uncheck the 'Show status in menu bar' checkbox.
    To remove the iChat status indicator from the menu bar, open iChat's preferences and uncheck the 'Show status in menu bar' checkbox in the General pane.
    Most menu bar icons can also be removed by holding down the Command (Apple) key and dragging them away from the menu bar.
    Joerg

  • How can I replace the power supply IN the time capsule

    I have a TimeCapsule that has a bad powersupply. I have opened the timecapsule to confirm this. Has anyone done this before? If so, where did the power supply come from? Cost? I took this to the Apple Igneous bar and they said there is nothing that can be done about it.They said it couldn't even be opened, but simply peeling the rubber bottom off and unscrewing a number of tiny screws and that's it. The 1 TB drive is LOOSE in there. That was a bit of a surprise. I had thought that the issue was the drive itself was bad. I had hoped that if I removed that the AP part would at least work, but after opening it up and firing it up I could hear that the power supply was buzzing thus the conclusion it was the issue.
    I am going to put the SATA drive in a reader to see that it is indeed ok. If that checks out, then I know for certain it is the power supply, but I don't know what to use as a sub since the unit needs both 12V and 5V. I'd just as soon find a good supply and use that. Any help would be appreciated.
    Thanks,
    John A Kostelac

    What version is your TC.. A1xxx from the rubber foot?
    Power supplies are not available from apple. They do not consider it repairable. It is a sealed consumable.
    Power supplies are available from ebay.. simply type time capsule power supply into search.
    This is absolutely standard issue that has been ongoing for ages and ages.
    See https://sites.google.com/site/lapastenague/a-deconstruction-of-routers-and-modem s/apple-time-capsule-repair
    For a multitude of ways to fix it.
    The 1 TB drive is LOOSE in there.
    No, it is not loose, it has rubber mounts with pins in the bottom base plate. You cannot see the mount points with the base off. This is standard hdd mount for low noise and vibration.
    I had thought that the issue was the drive itself was bad.
    Drives seldom are the problem. The Gen2 WD black has been less than great though.. and later spinpoint in Gen3 not so good.
    Apple Igneous bar  

Maybe you are looking for

  • Yet another customer with Photoshop CC crashing on opening!

    Hi Photoshop CC keeps closing as soon as it opens on my PC. I have installed, uninstalled and reinstalled over five times since starting my subscription to CC two days ago, to no avail. I have thoroughly cleaned my PC, followed all the advice I can f

  • Problems viewing site in Internet Explorer

    Hi I have created this site in muse works fine in all browsers except IE http://www.bryanandemmaswedding.com/ Some screenshots below of the problems in IE the text doesnt appear at all and everything comes in as seperate elements

  • HT202213 home sharing has messed up mu IPhone where I cant update or d/l any apps because the other person info comes up as the Apple ID

    I checked out the home sharing even turn it off and when I try to d/l or update anything my daughters ID comes up I tried signing out of my account. It has all my information but as soon as I try to d/l or update her info comes up HELP!

  • Gate entry pass

    dear sap guru, Service purchase requistion text filed is not coming to related with that gate entry pass. For Example, in PR, we are putting in Header coloumn, about material details, quantity. It is not coming to Gate entry pass. How we can get this

  • [SOLVED] globbing in /etc/hosts or something similar

    Is there any way to glob addresses in /etc/hosts? If not, which seems to be the case, is there something else that could achieve a similar effect? Example: 127.0.0.1 *.localhost # enable subdomains on localhost (with Apache virtual hosts) It's not th