Deleted object in Transports

Hi All,
I was supposed to delete one Update Rule under a cube in both Q and P. First I deleted in Development and got in a Transport.
But unfortunately I have deleted the particular Update Rules form the Transport task.
How to go now. Is it the only way to delete in Q and P directly?
Or any smart way?
Thanks in advance.

Hi,
As others said, you first re-create the update rules and assign them to a new transport request. Then delete the update rules and assign these to another transport request. Now you will have 2 new trasnport requests.
Transport them in the same sequence to QA and PRD.
First transport will override the existing Update Rules in QA & PRD. Second transport will delte the Update Rules completely.
Cheers
Praveen

Similar Messages

Deleting objects in transport request

Hello,
I made the changes in InfoCube in developer system and included those changes in a transport request. I didn't release this transport. Then I realized that those changes must be reverted.
I know what I have to do. First of all I need to change manually InfoCube and then remove objects from transport request.
I have doubt about deleting objects. In transport request there is a lot of object which Iu2019ve never changed such as InfoObjects and InfoArea.
Can I safely remove these objects? Why these objects are attached to my transport request?
I checked them and last change was made by another user.
Thank you for your time.

Hi,
I don't think there is any version comparison available with target system like R/3 reports. You will manually have to compare the properties.
If you have lot of objects and do not want to loose any changes then you can even think of reverse transport from production system to development system for selected objects.
Now about locking the remaining objects you can open the TR through SE09 in change mode and then select the required items and from the tool bar you can directly lock all the items in single go.
Regards,
Durgesh.

Problem while deleting objects in Transport request

Hi Guys,
I am working on some object .It has some tables ,RFC's etc
If I make changes to some of the objects the next day aging the same object is attached with the same name in the Transport Request.Also if i try to delete one out of it,I get the folllowing message & I am unable to delete it.Please guide on both.
Message: "Object entry exists more than once. Sort and compress first"
1. why same object gets attached to the request again?
2.How to delete the duplicates entries of the object

Hi,
If more than one user has worked on the same object, then it would be included in the TR twice.
Right click & select SORT COMPRESS, then try to delete.
Best regards,
Prashant

How to delete objects in transport request

Hi,
I have several different questions in Transport requests and need advice:
1. I need to transport an Infoobject and I chose only necessary objects in grouping and I don't see any app components in the request before created, but in SE01, under the request id I see app components and infoareas listed. A bunch of them, which I don't need to transport. Why this happens?
2. I want to know if there is a way to delete all the app comps in one shot from the request before it is released?
Thanks.

U might have selected 'Collect automatically"
I suggest u, to delete complete request ( first unlock it in SE03... then delete it from SE09)
Recollect that InfoObject in a new request, by selecting only necessary object & Collect manually
In this way u will have less confusion

How to determine deleted objects in a transport

Hi
I create a new report Z_TEST_1 and assign this one to a new transport request.
Now I rename this report to Z_TEST_1B
In my transport are two entries:
-Z_TEST_1
-Z_TEST_2
Now I read this objects with function module TR_READ_COMM
Afterwards I want to analyse the objects of this transport
But how can I see which objects exists and which not?
I only need the (still) existing objects (in my test case: Z_TEST_2)
I don't want to check every single object if this object still exists. I know I could check the entry in table TRDIR (for reports).
But there are a lot more object kinds in my transport (function modules, dictionary objects, forms, table keys)....
Does anyone have a simple solution for this problem?
Thanks
Andy

Hello There.
SE03 is for finding the existing objects according to your first question (for function modules, reports, etc).
As your object is not imported or transported.
You need to find your deleted objects in Transaction SE95.
In the window beneath,
1. Go to window, Reset Objects.
2. Check the deleted objects.
3. You can also mention your request or package.
4. Execute.
5. Go to Deleted objects node.
6. Navigate to the node desired.
7. You can also find the request related to that business object by clicking on find requests.
These are the logs.
If you have already tried out then its good or else give feedback.
Good Luck & Regards.
Harsh Dave

Transportation of deleted objects

Hello All,
some unnecessary Queries and workbooks are transported to Test system and then to Production.Instead of deleting them manually in each system,i think we can delete them in development and write to transport request and then transport it to test and production systems..
can anybody let me know the procedure?
Bye.

Hi Rakesh,
Normally you can use RSZDELETE for deleting queries and other reporting objects in Dev Also. If such a object was already transported before, you will automatically get a transport request for the deleted object. There is no need to goto the transport connection for that. After releasing and tranporting the request, the objects will automatically be deleted in the target systems.
If you clear your open bex request and then do the deletions that you want to do, the only things in your bex request will be the queries to delete. If it is collecting other objects that you don't want to transport, you can manually remove those objects from your transport.
Hope this helps,
Sudhakar.

Deleted objects assigned to transport..

hi ,
i created one object, it is assigned to a transport. like a Ztable. Then when i delete it again transport request is being asked !! why ? what does this mean ?
what happens to this transport then ? what shud i do with this ??
thks

Hello,
A delete is a change just like any other change and will be recorded on a change request. If you released the change request on which you created the object then when you delete it you will be prompeted for another change request. If you had not released the initial change request then the delete should be recorded on that change request as well.
What this means is that you probalbly should transport both change requests to their target systems(PRD?) so that the create and delete are both reflected in the target. If the olny two changes on the request(s) are the create and the delete of a single object you could just leave the requests in the original system and delete/archive them
Regards
Greg Kern

Include Deleted Objects while exporting Namespace in File Transport System

Hi everyone,
What is the use of the option Include Deleted Objects while exporting a namespace using file transport system?
Thanks,
Anu

This is a basic question and should be searched on SDN before posting.
Say, you create a DT in dev and transport it to Test system. In sometime, the requirement changes and now you are supposed to use a WSDL (external def) so no DT / MT will be required and should be deleted. You can delete them in Dev but what will happen to those objects in test - it is not a good practice to delete objects in non-Dev env.
In such situation, you will make these deleted objects part of your transport to test / other env and it will get deleted over there as well.
Hope this answers your query. Make search on SDN / SAP Help for further reading.

Creating transport for PI deleted objects

Hi all,
PI newbie here.
I have deleted an Integration Scenario as it is no longer needed. I can see this in my Change List, along with the CS object from which this has been removed.
How do I get these objects into a transport request?
When I right-click on the CS to activate I get the objects in a Change List and the IS is there but not selected. I assume this is correct and that I smply activate the CS? Please confirm.
PS: once again apologies for newbie question.

Hi Glen,
In transport wizard , check deleted object and your deleted objects will also be available for transport
Note: When you delete any object in ESR / ID , you must activate the change list then only changes will be reflected on PI server / cache
Thanks
Hari.

Transport deleted objects in productive

Hi!
Help, plz.
What is the right way to transport deleted objects (levels, packages...) to PROD system from QUALITY?

Hi Marina,
I would think the right way to transport objects would always be from DEVP (development) to PROD and not from QUALITY else after a period of time it is possible that you might have three systems DEVP, QUALITY and PROD and none of them in sync with each other.
You use QUALITY only for testing/training purposes and not for development purpose.
If you have accidentally deleted objects from Devp, would suggest recreating the same in Devp.
hope it helps

How to delete bulk of objects from transport request?

Hi
I made some mistake in selecting the objects for transport, and now there are a lot of unwanted objects saved under the request number. I know the objects can be deleted from the transport request through SE01, SE09 and SE10. But none of these allows me to delete the request number because there are a objects under the request that has to be deleted first.
Is there any way by which i can delete the entire list of objects in one go rather than deleting them one by one?
Thanx
Sujai

Hi,
You have to Unlock the request before you deleting the request.
Goto SE03->Under Requests/Tasks Double Click on Unlock Objects (Expert Tool)-> enter the Request no you want to Delete and Click on Execute -. Click on Unlock.Now you can Delete that Request.
-Vijay

Delete the transport request Objects already transported

Hi,
I have a request which contains two function grps ( 'Z') , along with it function modules (Z) and related objects ( Z data elements, Z Classes, Z table types and Z table structures).
By mistake this request is transported from System1 to system2.
How can i delete them in system2. One way is manual, but guess some problems could occur in it.
Is there any other easier way.
Thnx.

Hello
You have two options to achieve your goal:
1.a) Create a new transport request (system 1) and include all objects that have been imported into system 2. Release this request as backup for restoring the objects in system 1.
1.b) Delete all objects on system 1 (creates a new request), release the request and import these DELETE entries into system 2.
1.c) Re-import the first request (1.a) into system 1 to restore the deleted object.
2.) Change the source system of the objects imported into system 2 to this system 2. Then you can easily delete these objects in system 2.
NOTE: Approach (1.) is only feasible if you do not have too many cross-references to the deleted objects.
Regards
Uwe

Restore deleted objects with local transports ?

hi experts,
while trying to delete existing source system and create the same again in RSA1, I deleted some of the BW objects as it was asking to delete. Now I could not activate the bw source system, which I created newly. I have local transport created for the deleted objects. Is it possible to restore the deleted objects back.
Thanks,
Usha

Hi,
Welcome to SDN !!!!!
Is it only single BI system or any other BI system exists. If exists are these deleted objects moved to that other system. If yes then try to create the requests of deleted objects in that system and then transport them here. If it is only a single system then as per my knowledge I dont think it is possible to resote them from local requests. Normally if you have two clients in a system and if you want changes from one client to be copied to other then we do it using SCC1. But I guess you BI system might have only one client and I think transporting them in the same client would not work. But anyhow just give a try by using SCC1 tcode.
In last case check with your BASIS consultant if they are taking backup and till what date backup exists. If backup exists then ask them to restore the same and this will restore the complete system to date of which the backup exists.
Regards,
Sharath

PI 7.1 CTS+ - Manually deleted object in PRD system

Hello,
We have PI 7.1 with CTS+ configured. However, there was a condition that an object was deleted manually in PRD system not via CTS+. After this all the transports that were connected to that object and transported to PRD system were imported successfully but ! the changes weren't set in PRD. That means, the CHR transported to PRD but the changes are not applied.
Any idea how t solve this problem ?
Please advice,
Dimitry

Hi Dimitry,
please check if the XI object you're trying to import have a lower version in PRD than in DEV/QAS.
In the opposite way if the XI object has a more recent version in PRD you'll not be able to update the object, since for the sistem the version you're trying to import is an old one.
Hope this help
Best Regards,
Francesco

Moving objects between transport

Hi Experts,
Initially I recorded my info objects, ods, info source, data source, info package etc in one transport. Since the order of my transport is changed I want to delete the info object from that transport request and lock it in a newly created transport request. I am able to delete the object from the previous transport request. Can anyone explain me how can I record those objects in the newly created transport request?
Appreciate your help. It's very urgent
Thanks,
RK

Hi,
To capture (Record) any of the object in transport request, follow the steps...
1. Go to Transport Connections (RSA1)
2. In "SAP Transport" tab, Click on "Object Types".
3. In middle pen, you will get all the type of BW object.
4. Select your desored objects and by Drag-Drop put them in right pen.
5. Select the dragged objects and assign them to a particular package by clicking on "Package" tab.
6. Then it will ask for a transport request, either create it or ous your own request.
This way you can capture any object in transport request.
Regards,
Yogesh.

Deleted object in Transports

Similar Messages

Maybe you are looking for