Deleted PO still print out

Hey, PO gurus,
If I create a single line item PO in our Dev environment and put it on hold immediately without saving it.
Go back and delete the line item and then save it, the PO will not print (the print will failed in message screen) which is what we want.
But when I do the same steps in our QA, the deleted PO will print automatically.
Is there any program/config that I need to check to see why the PO print function acts differently?
Thanks in advance!
Fisher Li

Brad,
Thank you for your help!
I checked the "Go to -> Determin, analysis" and there was no analysis available in our system.
I also checked the config in  T code NACE and the config are the same in both Dev and QA.
There must be something that I overlooked, so the PO print out acted differently between Dev and QA.
Fisher

Similar Messages

  • I am trying to print a PDF file to a legal size paper and I would like for it to fill up the page. How do I do this? I went into the settings and changed it from letter to legal, but it's still printing out the same size. Can someone help me, please?

    I am trying to print a PDF file to a legal size paper and I would like for it to fill up the page. How do I do this? I went into the settings and changed it from letter to legal, but it's still printing out the same size. Can someone help me, please?

    Are you trying to Print to PDF or are you trying to Print a PDF file to a physical printer?

  • Why do my resized images print out original size?

    i understand how to resize images (somewhat). however, when i print them, they are printing as original size. what do i have to do to correct this? i have searched the web in vain, am just not finding info. everything is about resizing only. i am using picture manager. have also tried with paint and photo gallery or something. no one in this house is very computer saavy, PLEASE HELP!!!

    Thankyou for your response! Still in need of help!  
               I am making a craft project. I have resized my image exactly how i want it to be to fit my project base. (No standard sizes work). I made the image smaller, to fit exactly on my base (a heart). I saw there were even templates with a heart, but have not figured that out yet. I used the percentage button to resize my image, with the ratio set to keep the dimensions correct. I saved the resized image. Then I opened it and printed it. It was smaller, but still not right, not how I have it on the screen and not the right size. It is too big for my heart and wouldn't work. I know it must be something simple, some little step I am missing. I need to know how to tell the printer the new size. I am using picture manager. I have a HP Photosmart Plus B210 series printer. I have picture manager, paint, hp photo viewer, windows photo viewer, media center, photo gallery. I don't understand why resizing, saving, then opening that file, still did not work. It still printed out (smaller than original but) not the size I needed. I also edited the image and saved it with a new size, and my editing changes.
           This is truly driving me insane! I have spent hours and hours trying to figure it out for myself, as well as searching the web, and asking for help from different forums. (Not to mention wasting lots of ink!??!!!!)
                                                         I Truly would appreciate any help,
                                                                          SINCERELY,
                                                                          lamblovegirl    

  • Print Out settings, Wireless Printing -- HP psc 750xi

    I'm able to use my HP psc 750xi wirelessly using the 750xi footmatic/hpijs driver but whenever i change the print out mode, nothing changes. i like to print out most stuff draft, grayscale since it's so quick. but when i choose that option, it still prints out in color and takes a long time. bascially, no matter what output mode you use, it all looks the same.
    I tried a couple other drivers but got the same results....i couldn't change the output mode.
    any suggestions? different driver ideas? any help would be greatly appreciated!

    Hmm....bummer, but thanks much for the info. Need to make do w/ this printer until cash flow is a bit better. So can I create 2 profiles for the same printer -- one w/ the HP driver for when I have lots to print out and am in my office (using USB connection) and one w/ the other driver that lets me print wirelessly? Just tried it but now I'm trying to switch back over to wireless printing and it's not recognizing the printer anymore....

  • Deletion or rversal of Cash Journal After Print Out

    Hi All,
    I want to delete or reverse the Cash Journal After the Print out has been taken. We have received the cash from the customer and have deposited the same in the bank and has taken the print out of the receipt as well. Now i want to change the posting date.
    How i can go for that.
    Please Help.
    Thanks and Regards
    Deepak

    Hi Deepak,
    Refer SAP Note-359656 - FBCJ: receipt printed - reversal not possible. SAP has for security reasons specifically made this check.Alternatively,if you want to reverse the receipt from customer just post one payment for the same customer on the same day as posting date.
    Assign points if the tip found useful
    Regards
    Gopal

  • Hi everyone. I have just started having problems with iCal.  Events that I thought I had deleted are appearing on Print Preview and on print outs. Likewise Events which I have not deleted have disappeared from my calenders, but appear in print preview.

    Hi everybody. I have recently started having problems with iCal (Version 2.05 (1069). Events that I thought I had deleted appear in Print Preview and Print Outs. Likewise Events that I have not deleted have disappeared from my calender (Month View) but appear in Print Preview and Print Outs. I see that there have been similar problems with Events disappearing especially in Month View. I wondered how print preview seemrd to be picking everything up deleted or not, and what the solution may be?. First time of Posting. I hope I haven't embarassed myself.

    Hmmmm.
    At the very least there must be a "com.apple.ical.plist"...iCal would not function without it.
    Click on the Finder icon in the dock
    Click on Go > Home
    Double-click Library
    Double-click Preferences
    Look for a file called "com.apple.ical.plist" and remove it to the trash.

  • Today I received an email from USPS saying a courier attempted to make a delivery and I should print out this label. As soon as I tried to do this I knew this was suspicious. I immediately sent the email to a spam abuse ctr and deleted it. what else to do

    I opened an email from USPS and when I did it stated that a courier had attempted to deliver a parcel and that I should print out the label and bring to loca PO to claim pkge. Yeah, I fell for it, and it was only after I clicked on print that I realized it was spam. I did report it to a spam abuse cte and deleted it but becasue I opned it and clicked the print, now I'm worried. I have a MacBook Air. Should I do anything else to protect myself?

    As long as you didn't give any information, there may not be any problem from this.
    http://support.apple.com/kb/ht4933
    Best.

  • Deleted SAPscript page still prints

    Hello,
    I have a check form with FIRST and NEXT pages.  There was a LAST page that I didn't need so I deleted it.  The checks are still printing with this last page.  Any ideas as to how and why?
    Thank you,
    JR

    Hi Joseph,
    have you activated the script after the deletion of the page.
    many times this happen with scripts.
    Reward points if useful.
    Regards,
    Atish

  • Suppressing 'Payment summary'  print out

    Hi
    does anyone know how to prevent the payment summary list from being printed ?
    We still require the Remittance advices to be printed, but the accounts team do not wish for pages and pages of the payment summary list to be printed out
    any ideas
    Thanks
    Tony

    Hi Tony
    Delete the page "last" of your payment advice form. See:
    Note 535214 - RFFO suppressing form summary sectn f paymnt advice notes
    Best regards
    JD

  • Each time I print, a data page of the print job is printed out.

    Each time I print a data page of the print job is printed out. How can I Disable as it is a waste of paper?

    Hello john42gd,
    Thank you for using Apple Support Communities.
    For more information, take a look at:
    Troubleshooting printer issues in OS X
    http://support.apple.com/kb/ts3147
    Use Software Update to find and install the latest available updates. If an update is installed, see if the issue persists.
    Open the Print & Scan pane or Print & Fax (Snow Leopard) pane in System Preferences.
    Delete the affected printer, then add the printer again.
    If the issue persists, try these additional steps:
    Reset the printing system, then add the printer again.
    If the issue still persists, reset the printing system again.  Download and install your printer's drivers. Then, add the printer again.
    Contact the printer vendor or visit their website for further assistance.
    OS X Mavericks: Change or update printer software
    http://support.apple.com/kb/PH13761
    Have a nice day,
    Mario

  • Embedded fonts still print garbage to any printer

    Hello,
    I'm using Acrobat Pro XI 11.0.08 and even though I can't find anything wrong with the document or settings I'm using, I still can't print without getting font substitutions to garbage characters.
    Preflight shows all fonts are embedded, but that they can't map to unicode.See example report below
    Fonts are:
    Type 1 font: "EX_CFF_Frutiger_LT_Std_45_Light"
    Type 1 font: "EX_CFF_Frutiger_LT_Std_45_LightBold"
    Type 1 font: "EX_CFF_Frutiger_LT_Std_55_Roman"
    Type 1 font: "EX_CFF_Lucida_Console"
    Type 1 font: "EX_CFF_USPS_Bar_Code"
    Tried different printers as well as MS XPS Document Writer.
    Tried all recommended things in the adobe web support docs.
    Tried searching google and forums for solutions.
    Tried rewriting the document.
    Tried various preflight fixes.
    Can anyone point me in the right direction?
    Thanks,
    Brian

    I know this is an old thread, but I was just wondering if anyone knows a solution to this.  I have an issue which seems similar...
    I have a user that is having a problem printing some PDF files.  Many print fine, but some print junk text... sometime the entire document and other times just part of the text.  For example, on a document that prints incorrectly the word "Quotation" displays fine on the screen but prints out like this "œ´±¨ø¨∑±≤".  It prints this way across every printer, including printing it back to a pdf file or to a Microsoft xps document.  When other users on the network print the exact same document to the exact same printers (same driver) it prints out fine.  Here's the steps I have taken so far:
    - Completely uninstalled Acrobat Standard and Acrobat Reader and reinstalled both (and each one individually to see if   that made any difference).  One time I actually went though the registry and deleted every reference to Acrobat that I could find.
    - Tried to print the document as an image.
    - Verified all the printing and Acrobat settings against a machine that I know is working fine.
    - Replaced as many Windows system fonts as I could.
    I've been working on this for weeks and there are probably other things I have tried, but those are the ones I can think of right now.  My next step is to just go onsite to the client, format the hard drive and start from scratch, but I'd really like to avoid doing that.  If anyone could help me out with a solution, I would really appreciate it.  Thanks.

  • I just updated my OS to Mavericks, as well as my Pages app. Now my previously created documents print out as blank paper, even tho I can see the text on my desktop.The margins have also been altered. How do I fix this?

    I just updated to Mavericks, then updated my Pages App. Now none of my previously created documents print out, except as blank pages, even though I can see the text on the documents, but with altered margins, on my computer screen. How do I fix this so the documents print out normally again?

    Purplehiddledog wrote:
    I do backup with iCloud.  I can't wait until the new iMac is available so that I can once again have my files in more than 1 location without needing to rely solely on the cloud. 
    I also rely on iTunes and my MacBook and Time Machine as well as backing up to iCloud. I know many users know have gone totally PC free, but I chose to use iCloud merely as my third backup.
    I assume that the restore would result in my ability to open Pages and Numbers and fix the problem with deleting apps, but this would also mean that if my Numbers documents still exist solely within the app and are just not on iCloud for some reason that they would be gone forever.  Is that right?
    In a word, yes. In a little more detail.... When you restore from an iCloud backup, you must erase the device and start all over again. There is no other way to access the backup in iCloud without erasing the device. Consequently, you are starting all over again. Therefore, it would also be my assumption that Pages and Numbers will work again and that the deleting apps issues would be fixed as well.
    If the documents are not in the backup, and you do not have a backup elsewhere, the documents could be gone forever.

  • How can I print out the contents of my hardrive

    I have a hardrive with about 200 video clips and need to print the titles for cross refrerencing. I was just going to "grab" screenshots but this will take about ten sheets of paper. How can I print out a list of all the files on the drive?

    I tried this Finder drag method & discovered that it is very important to set the blank TextEdit document to plain text before the drag (from the format menu or with Cmd-shift-t). If you don't, TextEdit attempts to load the content of the files!
    Once I discovered this, I tried the method with Find (Cmd-F) results & it works for that, too. This means that by choosing the right combination of search location(s) & search criteria, you can extend the method to filter the list to just about any files you want, which could be very handy.
    For instance, set the "Kind" criteria to "QuickTime Movie" & location to "Computer" & you get a list of every QT movie. Or set the search location to the folder containing the movies of interest & you get all of them, including ones in subfolders. You could also use the 'date created' or other search criteria to filter the list to a specific subset of movies (or whatever).
    If you need to do this often, you could create one or more 'Smart Folders' with the criteria preloaded for each search.
    The only drawback I see for either Finder based method is the full path one. If you are getting results from just one or a few folders, Find & Replace can delete any of the path name fairly easily, but it becomes a chore if there are a lot of different ones. Some other text editor, like TexEdit Pro, that supports grep searches would be handy here, but since I'm not up to speed on grep, someone else will have to explain how to use it for this, if they want.

  • Freezing when trying to print out PDF?

    Trying to print out PDF of Aperture 'book'. Each time it freezes on the same page ... this particular page is where I have one image stretched across two pages. Is this possibly a glitch with Aperture?
    Ben
    I've trashed my preferences several times; doesn't seem to help. I've also tried to use two copies of the same picture (right half on right page, left half on left page); but that doesn't work too well, as Aperture seems to want to favor one side or the other – and thus I can't adjust the two sides to match up properly.
    Any suggestions would be most appreciated, thank you,
    Ben

    Hi Allen,
    I'm all topped up, big graphics card, latest ver. of Tiger, permissions repaired every day or so. The mystery continues.
    I love the IDEA of the two page spread. Have longed for it in Pages, where I'm producing a whole series of books ... a lot of two page spreads (but done by using two versions of the same still).
    Thanks,
    Ben

  • Problem in Print Out of ALV report

    Dear All..
    I am trying to take print out of an ALV report. there are 36 columns in my report. when i try to take print out, warning appears which says system cannot print the last 277 columns of report.
    i have tried using different formats for printer like :
    Format                  Description
    X_PAPER                 ABAP/4 list: Default list formatting
    X_SPOOLERR          ABAP list: Spooler problem report
    ZX_65_284               65 Rows and 285 Columns
    X_65_255                ABAP/4 list: At least 65 rows with a maximum number of c
    X_65_200                ABAP list: at least 65 lines with 200 columns (not for a
    X_58_170                ABAP/4 list: At least 58 rows by 170 columns
    X_65_132                ABAP list: At least 65 rows by 132 columns
    X_90_120                ABAP list: At least 90 rows by 120 columns
    X_44_120                ABAP/4 list: At least 44 rows by 120 columns
    X_65_80                 ABAP/4 list: At least 65 rows by 80 columns
    but every time the same message appears even on A3 size paper..
    i am using REUSE_ALV_GRID_DISPLAY to display ALV.
    Please help to to take out prints(can be in condensed mode) so that all columns appear on the print out..

    HI sujeet,
    Thanks for ur response. i had already checked the printer settings.. i think there is no problem with this. Can u Please suggest something else. thanks
    Hiii jyojit..
    Thanks for reply. I had already checked the said check box in spool admin. but the problem still exists. Please suggest something to get rid of the problem.

Maybe you are looking for