Deleted Pricing Cond rec in MEK2 and added a new one, now no pricing in PO!
Hello,
we had a bad pricing Condition record for Stock Transport Order PO's that had to be deleted and we needed to add a new pricing condition record.
We used MEK2 to delete the bad record (Purch. Info Rec Category was equal to a "space"), and then add a new pricing condition rec. with a "0" (Standard) in the Purch. Info Rec Category and a correct monetary amount. Then saved.
Now when we create a PO for the material we corrected the pricing condition rec, we get NO PRICING!
Even if I go into MEK1 to just add the new condition record and set the start date back further in the past and save ... nothing comes through on the PO for the material in question.
Is there something wrong with Deleting Pricing Condition Records? I can not find a note on this. I can see the old deleted condition record in the KONP table and the new condition record, but the PO create program is not picking up the new condition record no matter what we do.
Any one have a situation like this before?
Scott.
I did check the analysis before, but I took a closer look and the "Material Info Rec (Plant-Specific)" access was not defined.
The problem is that on the Material info record, we did not have the info record extended to the plant, just the Purchase Org.
Thanks.
Similar Messages
-
Deleting Old Outlook E-mail Address and Adding a New One
I am using an SMT5800 and have recently moved. In my previous location, my phone was synced to my workplace Outlook E-mail address. Since moving, I have tried repeatedly to update my Outlook E-mail settings to match my new workplace. Unfortunately, when attempting to change the Outlook settings, the phone does not allow me to remove my old username. Since the phone also does not allow me to simply delete the old Outlook address and simply start over, I remain unable to Active Sync with my current place of employment. How might I go about rectifying this?
Dareru76 wrote:
I am using an SMT5800 and have recently moved. In my previous location, my phone was synced to my workplace Outlook E-mail address. Since moving, I have tried repeatedly to update my Outlook E-mail settings to match my new workplace. Unfortunately, when attempting to change the Outlook settings, the phone does not allow me to remove my old username. Since the phone also does not allow me to simply delete the old Outlook address and simply start over, I remain unable to Active Sync with my current place of employment. How might I go about rectifying this?
I assume you were using MS Exchange for your work. If you can not delete the old account then you do have a problem. This should not be an issue. First back up your phone, Contacts, Settings etc using a backup program like PPCPIMbackup(free) or SPB backup or equivalent. For this message I used PPCpim Backup and backed up all my data to my storage card. Next start ACTIVESYNC on the phone, click MENU>OPTIONS and delete the Exchange account there. Then establish a account with your new workplace. Once the account is established Start PPCPIM backup and restore just the info you want, i.e. contacts etc. That should work. -
I deleted my old email address and added a new one, after my iPhone died iCloud keeps popping up asking for the password of my old email address. I can't remember my password and the account is still gone, it pops up every few seconds. How can I fix this?
If you are unable to remember your password, security questions, don’t have access to your rescue address or are unable to reset your password for whatever reason, your only option is to contact AppleCare(or Apple ID Support), upon speaking to an operator you should explain that your problem is related to your Apple ID, this way you will not be charged for assistance, even if you don’t have an AppleCare plan.
The operator will take you through some steps you may have already tried, however they need to be sure they have exhausted all usual approaches before trying to reset your account, so you should try to be helpful and show patience with the procedure.
The operator will need to verify they are speaking to the account holder and may ask you some questions that only the account holder could know, and you will need to answer them if the process is to proceed.
Once the operator has verified your identity they will send a message through to your device which contains an alpha numeric code, which you will need to read back to them.
Once this has been completed they will send an email to your iCloud email address after a period of 24 hours, so you should check that mail is enabled in your devices iCloud settings.
Upon receipt of the email, use the reset link provided to reset your password, after which you should be able to make the adjustments to iCloud that you wish to do. -
I have forgotten icloud account password linked to my ipad. I am unable to reset the password as well as delete this account from my ipad, and use a new one.
None of us here, nor Apple, can help you.
-
I shall open delete my present account with iTunes and open a new one - but I do not have the password. How can I then delete the present account??
Since you can't delete Apple IDs and having multiple Apple IDs can cause confusion, what you may want to do is rename your existing Apple ID to the new email (desired Apple ID). That would in effect do what you want, get rid of the old and give you the new.
See "Apple ID: Changing your Apple ID"
ivan -
Upgraded to ios7 on iPad 2. Now can't send or receive mail (outlook).
I tried starting and restarting. I tried rebooting. I tried deleting mail account and adding in again. I
Now what do I do?I think I have solved this problem on m iPad2 by:
1. Reinstalling my email account.
2. Changing the settings on my PC to stop it from deleting my email from the server before my iPad could load them.
My PC uses Windows Air Mail. I made no known changes to my PC from the time I was running iOS6 to the installation of iOS7 ??? MS did come out with several updates this week??
3. In the same time frame when I was scrolling through web pages the Control Bar popped up every third stroke. It is very easy to change the setting of the Wy Fi setting from On to Off while deleting the unwanted Control Panel without any indication. This means that the Wy Fi must be constantly checked to make sure that is ON???
The three problems at the same time have made this the worst mess to fix in 12 years of internet use. The fix has lasted for about 8 hours at this point, Tomorrow will tell. -
this guy at school chucked my ipod on the ground and the lcd broke so he gave me his so i have been trying for the last hour to transfer my stuff onto the new one concitering i have all my personal stuff on the other one that i would like to have on this one including a 15 chapter story in notes that i have been working on for a while. i hope you can help!
Downloading past purchases from the App Store, iBookstore, and iTunes Store
-
Removing a window and adding a new one with swing.
Hi,
A friend of mine recently asked me to add a GUI for a small chat he made, so I thought I'd help him out. I've come across something that's troubled me in the past, and I could never find a solution. What I'm trying to do is make it so a log in window pops up (have that working alright) and then when you press sign in, it removes that window (log in) and adds the main chat window (have this fully functional, too).
If someone could provide an example or point me in the direction of the proper API to look into, so that I don't have to look through them all, I'd be extremely grateful.
Here's an SSCCE example:
import java.awt.BorderLayout;
import java.awt.event.ActionEvent;
import java.awt.event.ActionListener;
import java.text.DateFormat;
import java.text.SimpleDateFormat;
import javax.swing.DefaultListModel;
import javax.swing.JButton;
import javax.swing.JFrame;
import javax.swing.JList;
import javax.swing.JPanel;
import javax.swing.JScrollPane;
import javax.swing.JTextField;
import javax.swing.JTextPane;
import javax.swing.ListSelectionModel;
import javax.swing.ScrollPaneConstants;
import javax.swing.SwingUtilities;
public class Gui extends JFrame {
public static final DateFormat dateFormat = new SimpleDateFormat("HH:mm:ss");
public String sessionId;
public int returnCode;
public boolean recievedReturnCode;
public boolean errorConnecting;
public long lastActionDelay;
private JScrollPane listScrollPane;
private JList list;
private JTextPane console;
private JButton signInButton;
private JScrollPane consoleScrollPane;
private JTextField typingField;
private DefaultListModel userList;
private JButton sendButton;
public static void main(String[] args) {
try {
SwingUtilities.invokeAndWait(new Runnable() {
public void run() {
new Gui().setVisible(true);
} catch (Exception e) {
e.printStackTrace();
public Gui() {
setResizable(false);
setSize(500, 500);
consoleScrollPane = new JScrollPane();
console = new JTextPane();
typingField = new JTextField();
userList = new DefaultListModel();
sendButton = new JButton();
initializeLoginWindow();
setDefaultCloseOperation(EXIT_ON_CLOSE);
public void initializeLoginWindow() {
setTitle("Login");
signInButton = new JButton("Sign in");
signInButton.addActionListener(new ActionListener() {
public void actionPerformed(ActionEvent evt) {
initializeChatWindow();
signInButton.setBounds(5, 100, 75, 20);
getContentPane().add(signInButton);
getContentPane().setLayout(new BorderLayout());
getContentPane().add(new JPanel());
public void initializeChatWindow() {
consoleScrollPane.setHorizontalScrollBarPolicy(ScrollPaneConstants.HORIZONTAL_SCROLLBAR_NEVER);
consoleScrollPane.setVerticalScrollBarPolicy(ScrollPaneConstants.VERTICAL_SCROLLBAR_AS_NEEDED);
consoleScrollPane.setViewportView(console);
consoleScrollPane.setBounds(5, 5, 575, 350);
console.setEditable(false);
typingField.setEditable(true);
typingField.setBounds(5, 360, 575, 25);
list = new JList(userList);
list.setSelectionMode(ListSelectionModel.SINGLE_SELECTION);
list.setSelectedIndex(0);
list.setVisibleRowCount(5);
listScrollPane = new JScrollPane(list);
listScrollPane.setBounds(585, 5, 110, 350);
sendButton.setText("Send");
sendButton.setBounds(585, 360, 111, 25);
getContentPane().add(consoleScrollPane);
getContentPane().add(typingField);
getContentPane().add(listScrollPane);
getContentPane().add(sendButton);
getContentPane().setLayout(new BorderLayout());
getContentPane().add(new JPanel());
}Thanks in advanced!jduprez wrote:
I've come across something that's troubled me in the past, and I could never find a solutionWhat is the problem?
a log in window pops up (have that working alright)
and then when you press sign in, it removes that window (log in) and adds the main chat window (have this fully functional, too).Hum, between what is working alright and what is already functional, I fail to see what is missing. Again, what is your problem/question?
If someone could provide an example or point me in the direction of the proper API to look into, so that I don't have to look through them all, I'd be extremely grateful.
[url http://download.oracle.com/javase/tutorial/uiswing/components/frame.html]JFrames and [url http://download.oracle.com/javase/tutorial/uiswing/components/dialog.html]dialogs seem to show enough API usage to do that. Still, I stronlgy encourage you to read the whole Swing tutorial: http://download.oracle.com/javase/tutorial/uiswing/index.html
Incase you didn't see the hyperlink above, here's the SSCCE link: http://www.mediafire.com/?e5e3ci3kbvickla
The "S" in SSCCE stands for "Short" (or, depending on authors, "Simple"). Anyway, a decent SSCCE should fit within a forum post (between code tags please). The whole idea is to provide the simplest thing to people willing to help. No doubtful sites. No non-standard extensions.
Best regards,
The problem is that I cannot seem to remove the first pane, leaving the second one to be drawn on the current one.
In reguards to SSCCE, I always thought it was just a short runnable class example, but I've added the class to the main post. I'll take a look at the API in a few as well. -
How to delete an icloud account off iphone and put a new one on?
i need to take an icloud account off and replace it with a different icloud account on my iphone 4? how do i do this?
iCloud Help
http://help.apple.com/icloud/?lang=en
iCloud FAQs
Creating an iCloud account: Frequently Asked Questions -
HT1373 once i deactivated all 5 computers ,and authorized my new one, how do i see my music
once i deactived all 5 of my computers and added my new one, how do i see my music that i have purchased
Select the store on the left side of iTunes.
Click on Purchased on the right side under Quick Links.
You can re-download your available previous purchases.
Hopefully those apply to iTunes for Windows too, but since you posted in the iTunes for Mac forum that's what you get. -
My iPhone will not send mail. I deleted the acct. and opened a new one. I rebooted my phone too. I am at a loss as to what I should do next.
Sounds as if you have a POP email account. If that is the case, then deleting the account and adding it back deleted those folders. They will be recreated as needed. As soon as you send an email, the Send folder will be created. As soon as you delete an email the deleted folder will be created, and the same with saving an incomplete email will create the draft folder.
-
I recently changed my Apple ID but I keep getting messages from my Cloud account asking for my password to my old Apple ID. If I go in and delete the current Cloud account that appears to still be associated with my old ID and set up new one with my current ID will I lose all the stuff in the Cloud?
Did you just change the address or did you create a new Apple ID.
-
How do you delete an iCloud account on a Mac and create a new one?
How do you delete an iCloud account on a Mac and create a new one with a totally new iCloud email address and ID??
You can cannot delete an AppleID, you just sign out of all services, stop using it, and start over with a new AppleID. If your ID is an iCloud ID it cannot be changed, see this link.
: Apple ID: Changing your Apple ID
To if you want to start over with a new AppleID, see this link to update all services: Update the features and services -
Ive changed my apple id. in my iPad and iPhone under iTunes it's showing the new id but under iCloud still shows old I'd. I have been told to delete account and add in new one but worried in case lose all my stuff that's already saved in iCloud. any idea?
If all you did was rename your ID, you can go to Settings>iCloud, tap Delete Account, choose Delete from My iPhone when prompted, then sign back in with your renamed ID. Deleting the account only deletes the account and any data you are syncing with iCloud from your phone, not from iCloud. Provided you are signing back into the same account and not changing accounts, your data will be synced back to your phone when you sign back in.
If, however, you are changing to a new account with a new ID, choose Keep on My iPhone when prompted. Then choose Merge when you sign into the new account and turn your iCloud syncing back on to upload your data to the new account.
Before deleting the account, save you photo stream photos to your camera roll (tap Edit, tap all the photos, tap Share, tap Save to Camera Roll). -
Can i delete my itunes store account and create a new one?
i have an itunes account open already but its old and full of old downloads and songs which are not relevant to me anymore. id like to delete my account and open a new one, is this possible? if not, how could i make a new account with the same email as my old account?
any help is much appreciated, thank you.Then just delete the music from your iTunes library that you no longer want.
There is no reason to create a new iTunes account to purchase new music. This will not delete the old music in your iTunes library.
Maybe you are looking for
-
Help: iTunes freezes when I try to change the music folder location
Hi everyone, I want to change my iTunes music folder location but every time I click on the change button (Edit > Preferences > Advanced > Change) iTunes freezes. All of my music is in an external drive and I recently reinstalled windows, so I had to
-
How to identify the selection parameters of already executed transactions
Hi, I like to identify the selection parameter of already executed transaction. SM20 shows me which transaction was executed on which day and by whom. But it does not give me it is executed with which kind of selection parameters. For example, MD02/0
-
Hello Everyone: I am running Oracle Discoverer Desktop version 9.0.4. In a calculated field, I want to take a "ship date" field and arrive at its corresponding week number. Our company is on a 5-4-4 calendar and every year starts with January 1. For
-
I uninstalled Adobe Air and Adobe Reader and now I cannot reinstall them on the Adobe web site. I go thru the steps on Adobe site and never get a popup to RUN any programs.
-
I created a BSP application, created the SICF entry, and have been running the application for months. All of a sudden I am getting a page cannot be found error. It's like it can't find the initial page. When I go into an application that IS worki