DELETED QUICKTIME AND NOW iTUNES wont work

I recently had to delete quicktime to install other software for my cell phone. After completeing the download and deciding it unworthy of my attention. I wanted to put quicktime back on. when i go to download the software back on the the computer it says: [quote]The plugin did not initialize properly[/quote]
Also when i click the short-cut for iTunes this pops up:
[quote]iTunes has encountered a problem and needs to close. We are sorry for the inconvenience.[/quote]
I've contacted customer service and they instructed me to delete iTunes and Quicktime and re-download them. I still cannot access iTunes.
thankya kindly,
~$tudmuffin002100

Here's what worked for other users; perhaps it will work for you (I've never had this problem so I can't say for sure):
1) Uninstall QuickTime from the Add/Remove Programs control panel. If you have difficulties, try Microsoft's Installer Cleanup Utility.
2) Clean up the Windows registry with http://www.ccleaner.com/ (freeware)
3) Restart your system.
4) Delete the QuickTime folder
5) Reinstall QT from the standalone installer.
Hope this helps.

Similar Messages

  • The new itunes update will not install properly and now itunes wont work at all

    k, so I tried installing the new update for itunes and now it wont work at all. it says that the mobile device isnt installed. i have uninstalled and reinstalled itunes 4 times now.

    My issue is it wont even reinstall onto my computer
    Yes I'm aware of that. The procedures are also for trying in cases where iTunes can't be reinstalled due to a "Could not start Apple Mobile Device service" message.
    If you're getting a different error message relating to the Apple Mobile Device Service (or Apple Mobile Device Support) when you try to reinstall iTunes, post back to let us know what that error message says. (Precise text, please.)

  • I moved my itunes library to external drive and now itunes wont work.

    I moved my itunes library to an external drive and now itunes cannot find the library. I followed a youtube video and all seemed to work fine until i deleted the old library and emptied the trash. Prior to deleting and emptying the trash I checked preferences to verify the path of Itunes was to the external drive. It seemed to work even when I moved the original library to the trash.
    Now when I launch itunes the song listings show but the songs cant be found. I checked the volume of my itunes that I moved to the external and it was about 4 GB that i moved. I have approx 2000 songs.
    Any suggestions?

    Hold down the alt/option Key when you start iTunes a dialog box will open
    Select Choose Library and select the itunes library on your external drive

  • Just got new hard drive and now itunes wont work

    I had my hard drive replaced in April and started having problems right away. I finally had a chance to bring it in today and they replaced the hard drive again. I don't have an external hard drive so I couldn't back up my music that way, so I tried using CDs and that didn't work either. At the store, the guy that was helping me suggested I use a flash drive. So, he did that for me. He said when I set up the computer I should open the flash drive first and drag and drop the saved music into the music folder and then open itunes. I did the first part but when I opened itunes I got a message saying "The file 'itunes library' cannot be read because it was created by a newer version of itunes.
    Does anyone know what that means? itunes wont open at all and I can't even listen to my old music. Any help would be appreciated.

    Did you try using the File>Add to Library option? I would dump everything you put in the music folder, since it's not recognizing it, and then try to re-import it using that option.
    Technically, the prompt means that you're using, for example, iTunes 7 to try to open a file that iTunes 9 created, and it won't be able to do it. Do you know what version of iTunes you used to create the original file, and which version you're using now? It's hard to imagine the one you're currently using is older than the one creating the file.

  • HELP: I reinstalled my OSX tiger and now itunes wont work??

    OK here is the total lowdown.....I have been doing some tweaking to my computer
    I have a Powerbook G4 OSX, I recently added 1G of Ram making it 1.25
    and I had to re install my OS disks to preserve and something (im not technical) because I was trying to download illustrator cs3 trial on my computer and it told me that it conflicts with CS3 the very program I was trying to get. So I talked with a genius and he told me to reinstall the OS disks and choose preserve blahblah......I chose it, it seemed to work but when I went to use my itunes it told me that I needed 10.4.7 or later.... I USED to have 10.4.10 before the reinstall now I have 10.4.....what is going on... i just want to get my jams back on. HELP what can I do. what did I do? now, everyone, lets be a hero and help me!!
    karen

    oh yeah i forgot...the message that my itunes gives me is " you need 10.4.7 or later please go to apple.com/macosx to upgrade"

  • I just deleted 300 messages on my iphone 4 and now it wont work. What to do?

    I decided to delete about 300 messages from my iphone 4 and now it wont work. I can't sent any messages. I tried to turn off my phone... But nothing seems to work. Please help!

    Reset the device by pressing and holding the home and power buttons until the white Apple logo appears.

  • I accdently formated my shuffle and now it wont work what do i do?

    I accdently formated my shuffle and now it wont work what do i do?
    That and when I plug the shuffle in to the comp iTunes doesn't reconize that the shuffle is pluged in.
    it has updated a-few times. and when iTunes sees that the shuffle is in the comp it tells me that the songs are on the shuffle.............but when i unplug it and put my headphones in no music comes out of it!
    so what am i to do
    shuffle 512MB Windows XP

    I'm having the same problem! My good-for-nothing brother has formatted iPod shuffle through "My Computer" and now it won't work. Neither iTunes nor iPod software updater recognise the thing. To be honest, neither application even start when the shuffle is plugged in! And now I've just read that apple says you "SHOULD NOT FORMAT" shuffle. What am I to do? Have I lost my iPod for ever?

  • I downloaded the update and now it wont work.

    I downloaded the update and now it wont work. It just shows me a screen with a lightning chord going to the Itunes icon. Am I supposed to plug it into my mac or something?

    Welcome to the Apple Community.
    If your problem persists get yourself a micro USB cable (sold separately), you can restore your Apple TV from iTunes:
    Remove ALL cables from Apple TV. (if you don't you will not see Apple TV in the iTunes Source list)
    Connect the micro USB cable to the Apple TV and to your computer.
    Reconnect the power cable (only for Apple TV 3)
    Open iTunes.
    Select your Apple TV in the Devices list, and then click Restore.
    (You may already have a micro USB cable if you have a camera or other digital device)

  • Downloaded IO5 to my 3gs and now it wont work

    I just tried to download IO5 to my 3GS and now it wont work, boots up in Japanese or maybe arabic and wont let me do anything, was working OK before the download, Itunes says "no sim card present"
    Please help

    Keep trying. The update server is overloaded. You will eventually get through and your update will continue where it left off.
    I got the error message about 12 times before it finally connected and continued.

  • Just installed the update and now iTunes wont open! Help!!!

    Just installed the update and now iTunes wont open! Help!!!

    See also Troubleshooting issues with iTunes for Windows updates.
    tt2

  • I updated my iphone to the ios6 and now it wont work.

    i updated my iphone to the ios6... and now it wont work at all.
    it wont even turn on, it keeps going back and forth between the black screen and then the apple mark pops up for a few seconds, and then turns back to the black screen again... and that just keeps going on...
    someone please help...

    Seems like ios6 isn't any good for any of their devices. I have an iPhone 4 and recently updated to ios6 and have had all the wifi problems and apps getting hung up on load screens. Restore is your best bet and downgrade if you can back to ios 5.1. If restore doesn't help with a fresh install of ios6 then call every Apple support number you can find and be heard like the 1,000s of other people like us with ios6 problems demanding support. There doesn't seem to be any quick fixes for ios6 other than an update from Apple.
    <Edited By Host>

  • I connected my ipod before installing softwear and now it wont work

    i connected my ipod before installing softwear and now it wont work...like abosolutely nothing...its frozen

    First of all, try resetting the iPod. It may take several attempts and is best done connected power.
    Then download the iPod Updater, install this to your computer, restart the computer, run the Updater, then connect your iPod when prompted (not before), then follow the set up procedure.

  • All my email has disappeared from iCloud.  I did not delete it, and now it's working again, but only from 28 August 2013.  What happened to my old emails? How do I get them back? thanks

    All my email has disappeared from iCloud.  I did not delete it, and now it's working again, but only from 28 August 2013.  What happened to my old emails? How do I get them back? thanks

    Have you checked whether the emails are visible at http://icloud.com ? If they are, it's a problem between your Mac and the website; sign out in System Preferences>iCloud and sign back in again.
    If they aren't, then it's a server problem and you need to contact Support. If you currently happen to have AppleCare, either because you recently bought Apple hardware or have paid to extend the inititial period, you can contact them here:
    http://www.apple.com/support/icloud/contact/
    You will need the serial number of the covered hardware.
    If you are not covered by AppleCare, then - in common with other free email services - there is no free support and you may be asked to pay a fee; if so you should argue that this is a problem they've caused (it's not the first time, by the way) and you shouldn't be charged.

  • Hi I updated my apple tv box and now it wont work? Can I reset it?

    Hi I updated my apple tv box and now it wont work? Can I reset it?

    That usually indicates that security software is interfering with the process
    See
    http://support.apple.com/kb/TS3125

  • Re-install of Tiger 10.4.11 non intel now Itunes wont work

    Hello all. decided to clean my old imac G5 non intel by reinstalling tiger and now itunes won't go at all. It launched as expected but when you try to go to the itunes stores it states in the status bar 'connecting' but then nothing happens. Have installed the most recent versions up to 8.2 but in each case it wont work.
    I'm thinking there must be a config problem somewhere in itunes. Have deautherised  then reuatherised and am able to sign in, but still no joy any help appreciated - Jimmy

    I don't know the iTunes requirements for using the Store but it would not surprise me at all if iTunes 8 no longer works with the iTunes Store.  I know my iTunes 7.5 stopped working with the Store several years ago.  I hear they recently changed how the Store appears in iTunes which suggests they did a software change and probably didn't even consider anybody would still be using iTunes 8.  Apple is pretty fast off the mark for abandoning support for older platforms and I would be surprised if iTunes 8 continued to work with the Store for this long.
    iTunes 9.2.1 (the newest that will run under Tiger but I don't know if even this will still connect to the Store) - http://support.apple.com/kb/dl1056

Maybe you are looking for

  • How to remotely fix computer in Yosemite

    I am often called upon to fix my 83 year old father's iMac. I would love to be able to somehow remote into his computer and fix it that way vs having to drive all the way to his house. Is there a way of doing this? I don't quite understand the differ

  • Output Column does not have a matching source column in the schema

    Hi Everyone,                        Can you please help me in this. Already an ETL is loading the data from AS400 TO SQL server. I need to add a new column. In the Source (OLEDB source) am pulling the data from AS400 using ADO.NET connection manager.

  • AS 2.0 to AS 3.0 coding help!

    im  new to flash and all this, so can someone please translate this code to AS3.0 coding, before i kill myself _root.onEnterFrame = function () if (_root.mouseX<50){ imgBar.prevFrame(); imgBar.prevFrame(); if (MovieClip(root).mouseX<550){ imgBar.next

  • Aperture crash - where to download full version

    Hi, I transfered my Aperture from a different computer and now it is not working at all anymore. When I log in my apple account it shows the serial number of my Aperture but no download available. Where can I download a full Version of Aperture 2.1.1

  • Pivot Point in "Rotate 3D"

    hi all, is there a way to change the pivot point in "rotate 3d" (timlines/add action)? i have no problems to set a new pivot point with the transform/rotate tool. works well. but in rotate 3d it rotates around the center of the object. an example, th