Deleted records are not captured in 2lis_02_itm

Hi SDN,
I am extracting Purchase order records(more specifically Outline agreements ME23K) from 2LIS_02_ITM.
When I delete a PO with Purchase Order History in ME23K and save it I am able to see the change recorded in LBWQ and now i run the collective run in LBWE I can see the total coloum in RSA7 filling with value 1.
Now when i try to see the record in in RSA7 it is showing nothing and also when the delta infopackage is run zero records are being pulled.
In a nutshell I am missing the deleted records with Extractor.
Is there any way I can see the actual delta record sitting in LBWQ after the deletion is posted.
Please help me out folks

Hi,
check this notes:
FAQ: Business Warehouse (BW) in Purchasing
SAP Note Number: [459517|https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes/sdn_oss_bw_bct/~form/handler%7b5f4150503d3030323030363832353030303030303031393732265f4556454e543d444953504c4159265f4e4e554d3d343539353137%7d]
Note [527490|https://websmp130.sap-ag.de/sap(bD1kZSZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=527490] - BW: Deletion indicator not set correctly - Part 2
Regards
Andreas

Similar Messages

2LIS_02_ITM - Deleted items are not in the ODS 0PUR_O01

Hello,
We activated 2LIS_02_ITM extractor. We noticed that the deleted order items are not available in the ODS 0PUR_O01. SAP Note 578471 (Deleted positions in BW and statistics) explains that deleted items are not "statistical" relevant. However, this is an issue for us. Does anybody know if it's possible to change the behaviour of the extractor to keep deleted order items in the ODS ?
Many thanks.
François.

Yes this is a known behavior in case of deltas.
For Deleted line items Rocancel field will have an entry with R.
To handle this you need to map ROCANCEL field in Technical group of transformation (Between Datasource to DSO) with 0Recordmode.
Once you will do that then after activating the data in DSO it will nullify the records and deleted order or item will not appear.
Regards,
AL

Delta records are not loading from DSO to info cube

My query is about delta loading from DSO to info cube. (Filter used in selection)
Delta records are not loading from DSO to Info cube. I have tried all options available in DTP but no luck.
Selected "Change log" and "Get one request only" and run the DTP, but 0 records got updated in info cube
Selected "Change log" and "Get all new data request by request", but again 0 records got updated
Selected "Change log" and "Only get the delta once", in that case all delta records loaded to info cube as it was in DSO and gave error message "Lock Table Overflow" .
When I run full load using same filter, data is loading from DSO to info cube.
Can anyone please help me on this to get delta records from DSO to info cube?
Thanks,
Shamma

Data is loading in case of full load with the same filter, so I don't think filter is an issue.
When I follow below sequence, I get lock table overflow error;
1. Full load with active table with or without archive
2. Then with the same setting if I run init, the final status remains yellow and when I change the status to green manually, it gives lock table overflow error.
When I chnage the settings of DTP to init run;
1. Select change log and get only one request, and run the init, It is successfully completed with green status
2. But when I run the same DTP for delta records, it does not load any data.
Please help me to resolve this issue.

I have recently updated my macs software then been onto Photo Booth and realised that all of my pictures/videos have been deleted and are not in iPhoto? Im not sure where they have all gone?

PLEASE HELP
I have recently updated my macs software then been onto Photo Booth and realised that all of my pictures/videos have been deleted and are not in iPhoto? Im not sure where they have all gone?

Photobooth and iPhoto are two quite different apps with no connection between them. I'd try the Using Mac OS X forum for whatever version of the OS you have.

Records are not showing

what is wrong with this code? it is not showing my 7 records.
the output is this [LINK|http://i338.photobucket.com/albums/n440/googleb0y/album1/output01.jpg]
when i use the debugger, intenal table is empty. [LINK|http://i338.photobucket.com/albums/n440/googleb0y/album1/debug01.jpg]
where did i go wrong? thanks for the help.
data: begin of WA,
        MYUID       type ZADDRESSBOOK-USERID,
        MYFNAME     type ZADDRESSBOOK-FNAME,
        MYLNAME     type ZADDRESSBOOK-LNAME,
      end of WA.
data: ITAB like table of WA.
select USERID FNAME LNAME
      from ZADDRESSBOOK
      into corresponding fields of table ITAB.
write: / SY-DBCNT, 'records found'.
if sy-subrc eq 0.
    loop at ITAB into WA.
      write: / WA-MYUID, WA-MYFNAME, WA-MYLNAME.
    endloop.
endif.

Ur problem is with the select statement...
data: begin of WA,
        MYUID       type ZADDRESSBOOK-USERID,
        MYFNAME     type ZADDRESSBOOK-FNAME,
        MYLNAME     type ZADDRESSBOOK-LNAME,
      end of WA.
data: ITAB like table of WA.
select USERID FNAME LNAME
      from ZADDRESSBOOK
      into corresponding fields of table ITAB.
write: / SY-DBCNT, 'records found'.
if sy-subrc eq 0.
    loop at ITAB into WA.
      write: / WA-MYUID, WA-MYFNAME, WA-MYLNAME.
    endloop.
endif.
When u use corresponding fields of addition SAP searches for same field names in table itab but u declare ur table with diff. field names..thats why these records are not entered into the table..as same field names are not found in the table...so to avoid it pl. try.this code:
data: begin of WA,
        MYUID          type ZADDRESSBOOK-USERID,
        MYFNAME     type ZADDRESSBOOK-FNAME,
        MYLNAME     type ZADDRESSBOOK-LNAME,
      end of WA.
data: ITAB like table of WA.
select USERID FNAME LNAME
      from ZADDRESSBOOK
      into table ITAB.
write: / SY-DBCNT, 'records found'.
if sy-subrc eq 0.
    loop at ITAB into WA.
      write: / WA-MYUID, WA-MYFNAME, WA-MYLNAME.
    endloop.
endif.
Regards,
Joy.

Records are not displaying as expected.

Hi,
Records are not displaying as expected.
i designed an query as
SELECT '1. Emp Detail ' Details from dual
UNION ALL
SELECT empno||ename details dfrom emp
UNION ALL
SELECT '1. Dept Detail ' Details from dual
UNION ALL
SELECT deptno||dname details from dept
UNION ALL
SELECT '1. Location Detail ' Details from dual
SELECT locationcode||locationname details from location
The above query is displaying the data as follow
EMP Detail
Dept Detail
Location Details
John
Kathy
Prem
IT
Customer care
Boston
Texas
but i need to display the data as follows
EmpDetail
JOHN
Kathy
Prem
Dept Detail
IT
Customer care
Location Detail
Boston
Texas
Please help me on this.
Thanks,
Naz

Records are not displaying as expected.Well, it certainly displays as I'd expect it to. i.e. in an undetermined order.
If you want the output of a query to come out in a specific order then you must use an ORDER BY clause in your query, otherwise you are just querying a set of data and there is no order to it. You cannot assume that the order of the data will be the order in which you union your queries together, that's not how SQL works, as SQL is designed to work on sets of data, not on sequential rows.
So, in your example you would want something along the lines of:
select Details from (
SELECT 1 as ord, '1. Emp Detail ' Details from dual UNION ALL
SELECT 2, empno||ename details dfrom emp UNION ALL
SELECT 3, '1. Dept Detail ' Details from dual UNION ALL
SELECT 4, deptno||dname details from dept UNION ALL
SELECT 5, '1. Location Detail ' Details from dual UNION ALL
SELECT 6, locationcode||locationname details from location
order by ord, details

Records are not inserted into MTL_TXN_REQUEST_HEADERS,MTL_TXN_REQUEST_LINES

Hi all,
I am doing pick release thru API.
For that , I have run following API successfully but my problem is that records are not inserted into MTL_TXN_REQUEST_HEADERS , MTL_TXN_REQUEST_LINES
tables so that I cannot generate the move order. Can anyone suggent the valuable tips for that ?
1. WSH_DELIVERIES_PUB.create_update_delivery
2. WSH_DELIVERY_DETAILS_PUB.Detail_to_Delivery
3. WSH_PICKING_BATCHES_PUB.CREATE_BATCH
4. WSH_PICKING_BATCHES_PUB.RELEASE_BATCH
5. WSH_DELIVERIES_PUB.Delivery_Action ( for p_action_code = 'PICK-RELEASE' )
regards with thanks in advance
sanjay

Hi All,
To create a Move Order Header & Line Record in MTL_TXN_REQUEST_HEADERS and MTL_TXN_REQUEST_LINES tables , I have run an seeded
procedure : CreateMoveOrderHeader & CreateMoveOrderLines .
The procedure : CreateMoveOrderHeader was run successfully but when I am going to run procedure : CreateMoveOrderLines , it is giving
an error .
Following Error text I am receiving at the time of running of procedure : CreateMoveOrderLines .
Initialized applications context: 5707 50138 660
*==========================================================*
Calling INV_MOVE_ORDER_PUB.Create_Move_Order_Lines API
*==========================================================*
Return Status: E
Error Message :INV
*==========================================================*
From the above error message, no specific error is received . Only " Error Message : INV " is received hence it is very difficult to judge & resolve an error .
Can anyone guide me that what is an error ? For what reason I am getting an error ?
regrads
Sanjay

Table changes in database are not captured in ODI model level

Hi All,
Can any one help me how to fix the bug in ODI.
Table changes in database are not captured in ODI model level.
Thanks in advance

I created the interface which is running successfully.
Now i did some changes in target table(data base level).
I reversed the updated table in model section. Till here its ok
The table which is updated in the model section is not automatically updated in the interface.
I have to drop the existed datastore in the interface and and re do the entire process of bringing the updated datastore, mapping,etc..
Please tell the any alternate way.
Regards
suresh

2LIS_02_S896 issue : Records are not updated into BW

Hi
->We use 2LIS _ 02 _ SCL extractor to pass PO's to BW with delta.
->Works fine until the last week ,
->But on a particular date ( 15.05.2007) some of the records are not updated in BW.They are even not found at PSA level itself
->For eg for a material X there are two entries found in R/3 ( MB51 ) for the same posting date, now one of them is picked in BW (PSA level ) and other is not.
->There was no load fail / delta fail in BW and there is no exit written for this.
->Records are not updated in RSA3.
Let me know how this issue can be fixed.Its urgent.
Thanks,
Jilani

Hi Gagan,
Kindly check if you have any selection restrictions in your infopackage.
Regards.

Special cursor are not captured in Captivate 6

We try to create software simulation of Russian analog of AutoCAD, named KOMPAS-3D.
In this program we are working with CAD drawings. And then in this software we are moving mouse over some objects of drawing like line or circle (or section in 3d drawing) - cursor are changing to special cursor symbol.
Important –> in this case cursor are changing not after mouse click. He changing with event mouseover.
But then we try to capture work with drawing in KOMPAS-3D – this special cursor symbols are not captured.
We try to use AC 6 for this screen capturing and can’t capture our special cursor symbols.
But in AC 5.5 – its work fine!
Help us please!

Hi
You might already know this, but stating it here to rule out the simple failure cases.
I have had a similar problem in the past using VTML tags inside Captivate. I used to type the slidenotes in my favorite editor and then copy paste the text from there to the slidenotes panel of Captivate. Turns out that my editor was using Unicode and hence the entire text pasted into Captivate slidenotes became unicode text, including the VTML markers. Though the pasted text "looked" fine the markers were messed up (for example, the double quotes around the value attributes looked like double quotes but they were actually multibyte unicode sequences) and this confused Neospeech. The output audio would be funny (for example it would read "Less Than...V...T...M...L...") or NeoSpeech will crash taking down Captivate along with it.
The fix was quite simple. I started typing the slide notes from within Captivate slide notes panel and everything worked fine after that. Alternately I could type in my favorite editor (after making sure that it is operating in Plain text mode) and then copy paste work flow also worked fine.
Another common mistake (at least, I do that often) is to select the speech agent from the drop down at the top of the dialog and forgetting to choose the speech agents for individual slide notes, which may still be referring to a non-neo-speech agent which does not understand the VTML tags.
No other software tool was required like the German Adobe Support team may have mentioned. I am using Captivate 7.
Cheers
Siva

Business area not capturing

Dear Experts
Business area not capturing for tax code while doing invoice verification.
Can anyone helpme
Regards
Kumar

Hi
Use t-code F.5D and F.5E for business area adjustment, Or else consult you FI Consultant
he Business area is never filled in automatic posting such as taxes or bank accounts. You have to customize the adjustment retroactively in the IMG. You will find it in "General ledger Accounting -> Business Transactions -> Closing -> Regrouping ..." Once you have set all the accounts require, in functional you have to run all the Regroup transactions (General Ledger -> Periodic Processing -> Closing -> Regroup -> Balance Sheet Adjustment ...)
This process ensures the zero balance per business area necessary for
creating business area balance sheets.

Procedure require in DB:i want insert records in temp table(if that records are not exist in temptable)

i have one "LOGTABLE" having 3000 records, in this table daily 3-4 records will be inserted.this table have 11colums no primary key columns.
i created another temp table as "LOGTABLEMONITOR". (copied from "LOGTABLE" having 3000 records)
i am expecting which are inserting daily 3-4 records in "LOGTABLE" will be inserting temp table "LOGTABLEMONITOR" (if that 3-4 records are not exist in "LOGTABLEMONITOR")

SELECT <columns>
FROM LOGTABLE
EXCEPT
SELECT <columns>
FROM LOGTABLEMONITOR;
Best Regards,Uri Dimant SQL Server MVP,
http://sqlblog.com/blogs/uri_dimant/
MS SQL optimization: MS SQL Development and Optimization
MS SQL Consulting:
Large scale of database and data cleansing
Remote DBA Services:
Improves MS SQL Database Performance
SQL Server Integration Services:
Business Intelligence

DNS records are not 100% correct

For a while now we've been noticing that some DNS records are not correct. The records are pointing to incorrect IP addresses. One by one I open the record, update the IP, then replicate across all domain controllers.
What would cause the hostname of one machine to point to another IP address?

I believe what you're seeing is from DHCP-DNS registration. You may have duplicates, or incorrect data for records that can't be updated by DHCP service or the DHCP client due to permissions on the record. You may also not have scavenging in place.
In summary:
Configure DHCP Credentials. The credentials only need to be a plain-Jane, non-administrator, user account. But give it a really strong password.
Set DHCP to update everything, whether the clients can or cannot.
Set the zone for Secure & Unsecure Updates. Do not leave it Unsecure Only.
Add the DHCP server(s) to the Active Directory, Built-In DnsUpdateProxy security group. Make sure ALL other non-DHCP servers are NOT in the DnsUpdateProxy group. For example, some believe that the DNS servers or other DCs not running DHCP should be in it.
They must be removed or it won't work. Make sure that NO user accounts are in that group, either. (I hope that's crystal clear - you would be surprised how many will respond asking if the DHCP credentials should be in this group.)
On Windows 2008 R2 or newer, DISABLE Name Protection.
If DHCP is co-located on a Windows 2008 R2 or Windows 2012 DC, you can and must secure the DnsUpdateProxy group by running the following:
dnscmd /config /OpenAclOnProxyUpdates 0
Configure Scavenging on ONLY one DNS server. What it scavenges will replicate to others anyway. Set the scavenging NOREFRESH and REFRESH values combined to be equal or greater than the DHCP Lease length.
For specifics and step by steps, and good discussions on what's going on in the background and what to expect:
DHCP Service Configuration, Dynamic DNS Updates, Scavenging, Static Entries, Timestamps, DnsUpdateProxy Group, DHCP Credentials, prevent duplicate DNS records, DHCP has a "pen" icon, and more...
http://msmvps.com/blogs/acefekay/archive/2009/08/20/dhcp-dynamic-dns-updates-scavenging-static-entries-amp-timestamps-and-the-dnsproxyupdate-group.aspx
Good summary
How Dynamic DNS behaves with multiple DHCP servers on the same Domain?
http://social.technet.microsoft.com/Forums/en-US/winserverNIS/thread/e9d13327-ee75-4622-a3c7-459554319a27
Another good Summary:
Thread: "DNS problem" December 18, 2013
http://social.technet.microsoft.com/Forums/windowsserver/en-US/37b8b6b3-6cb1-496c-8492-09ded13bab18/dns-problem?forum=winserverNIS
Ace Fekay
MVP, MCT, MCITP/EA, MCTS Windows 2008/R2 & Exchange 2007, Exchange 2010 EA, MCSE & MCSA 2003/2000, MCSA Messaging 2003
Microsoft Certified Trainer
Microsoft MVP - Directory Services
Technical Blogs & Videos: http://www.delawarecountycomputerconsulting.com/
This post is provided AS-IS with no warranties or guarantees and confers no rights.

MIRO issue (urgent!), amount and quantity fields are not captured from PO

Hi,
When we try to post thought MIRO using PO as reference, quantity and amount fields are not captured. We do MIGO first and then MIRO.
GR based invoice verification in the vendor master is selected and the check mark GR-based in the PO is selected too.
We're getting this MIRO issue for "all" PO and Service Entry Sheet.
We'll appreciate your recommendation in order to fix this critical issue as soon as possible.
Thanks in advance.

I was looking for copy controls and other functions. Glad this is now resolved. You need to award yourself points!
Cheers.

I can not delete or compose an email on iphone 5. The icon and delete button are not on the screen.

I can not delete or compose an email on iphone 5. The icon and delete button are not on the screen.

I had the same problem. I completely powered down the iphone and then powered it back up. I then had the bar at the bottom of the email app that I think you are looking for.
iPhone5, OS6

Deleted records are not captured in 2lis_02_itm

Similar Messages

Maybe you are looking for