Deleted Request continues to appears in ODS list of requests RSODSO_ROLLBAC

Hi ,
I have a request from PSA to DSO that was started and then stopped due to incorrect filter conditions. The request is now in status Red.
However, I am unable to delete the request. The delete starts and aborts soon after with a Message_X.
When I check the monitor window for this particular request - the last message reads: Set status to Deleted. How can I clear this request completely.
Messagenr. RSODSO_ROLLBACK006
Diagnosis
There is an inconsistency in the status table RSODSACTREQ when a request is deleted.
System Response
Data package "0" not found.
Procedure
If you have not made manual changes to table RSODSACTREQ that could have cause this error, contact SAP.
regards,
Frances
Message was edited by:
Frances D'Silva
Message was edited by:
Frances D'Silva

hi Frances
Is this the only request in DSO ?
If you want to delete the whole data from DSO then right click DSO and delete contents.If it says any error of locking , then go to sm12 and delete the locks.
Also stop any request running for this DSO in SM37.
Now you should be able to run load.
Regards,
Monika

Similar Messages

Unable to delete requests from ODS

Hi Experts,
I am trying to delete requests fwhich is having some added records rom an ODS. I changed the status of QM to RED and in the monitor screen as well. Now, when I try to select the request and delete, a trash can appears and after hitting the refresh button the reportinng availability appears against the request.
I deleted the entries in the change log table...then I was able to delete the request from the ODS. Now when I try to reconstruct those deleted requests from the Reconstruct tab by changing the QM status in the monitor to green, the status of these request are in Yellow and there are updated records but the added records are 0. When I try to change the QM status it give s message "Request is already (partially) activated, no further QM action is possible.
How do I change the request QM status to Green and the get all the added records as there were in previous instead of 0's with out reloading the ods from r/3.
Thanks in advance,
HT

Hello,
This error may be RSMPC141 error.
Please see Note 643880 and Note 849857
this may occur becos of loss f records in change log.
You will need to reload to fix this problem
regards,
karthik

Unable to delete request from ODS - BW 3.5

Hi experts,
I am not able to delete request from ODS in BW 3.5, patch level 21. I put the request red, but it does not help to delete it. The request is full load and quite hudge (16GB). Deleting actually takes too long (several hours), but does not finish, so I cannot tell you any error description. It seems that this job can run forever... I was trying to activate the request before, but because of a tablespace limitations I received some short dumps. That is why I am trying to load it agin in smaller parts. It is strange thou that in Manage/requests tab the request has flag 'available for reporting' but the data cannot be viewed as active (only as new data). Any ideas, OSS notes?
Thank you,
Michal

Hi,
If you want to delete requests manually from the ODS tables.
1. tcode se16.
2. delete the request in these tables : RSICCONT (delete activated requests OR
Make the selective deletion of the contents of that request), RSMONICDP, RSODSACTREQ (give the name of the ODS and the
request ID and delete all the entries pertaining to this selection in that table.), RSODSACTUPDTYPE.
You can check OSS Notes 947481
Regards.

Delete request in ODS, not in reconstruction tab

Hi experts,
Sometimes when i delete a request in ODS, it can be found in reconstruction tab. Sometimes you cant.
In which scenario it can be found and in which it cant. In case you need that deleted request to reconstruct and you cant find it in reconstruct tab, what you do.

Hi,
Whenever u delete a request from ODS,it might be seen in "Reconstruction" tab only when it still exists in PSA.Once the request gets deleted from PSA,then it wont be seen in
"Reconstruction" tab.
Hope it helps u
Thanks & Regards,
Madhu

TS2755 On new IOS 7, when I message contacts, it selects thier old contact number, despite the fact I have deleted/edited their number in my contacts list. IOnly by going through contacts, can I message the correct number. The old number does not appear t

On new IOS 7, when I message contacts, it selects thier old contact number, despite the fact I have deleted/edited their number in my contacts list. Only by going through contacts, can I message the correct number. The old number does not appear there, so I am unsure where "messages" is picking up the old number, it doesn't appear that "messages" is synching with "contacts". Any ideas how to fix this?

On new IOS 7, when I message contacts, it selects thier old contact number, despite the fact I have deleted/edited their number in my contacts list. Only by going through contacts, can I message the correct number. The old number does not appear there, so I am unsure where "messages" is picking up the old number, it doesn't appear that "messages" is synching with "contacts". Any ideas how to fix this?

How do I delete uninstalled Apps from the iPhone app list that is shown inside iTunes on my PC after sychronizaton?

To clarify and to not receive the answers of those who doesn't read more than 2 lines of a post: I am not asking how can I delete backups to free space in iCloud nor how to hide the purchase history!!! those things I already know...
to be clearer please let me explain what I mean by "list inside the iTunes of my PC". To access the list to which I am reffering you must take this steps:
1) Connect the iPhone to the PC. This should open iTunes if not already opened and activate the synchronization between iPhone and PC.
2) After syncronization and eventual backup in the iTunes window on the top right side it appears the tab "iPhone".
3) Click said tab "iPhone" to see its content. In the top bar you can see 9 tabs: "Summary", "Info", "Apps", "Music", "Movies", "TV Shows", "Books", "Photos" and "On This iPhone".
4) Click the 3rd tab, the one named "Apps", in this window on the left side you have the full list of the apps and on the right side you can see how these apps are arranged inside the device (inside home screens and folders).
I am referring to this particular list, the one on the left side of this page. See, I ricently run out of space in my iCloud so I decided tidy things up. I deleted all of the old backups both form iCloud and from PC and I hid all of the Apps that I no longer use from my purchase history.
now, the point is, every time I go to this particular list I can still find all of the apps, even those uninstalled from the device and removed from the purchase history...
In this list the apps that are still installed on my divece have got the "remove" button at its side and those which are not have got the "install" button... my point is that I went to great lengths to clean everything and still I can't seem to find a way to remove unwanted apps from this particular list...
I do suspect that it is because I have to restore some registry inside the iPhone itself... The point is that I don't want these apps to appear on this list anymore but I don't know how to clear it... Any help? Have I been clear?
thanks

That list includes all the apps that you installed to your device directly from iTunes on the computer, or which were purchased on the iOS device and subsequently transferred to iTunes on the computer.
If you right click on any item in that list and choose "Show in Windows Explorer" it will open your iTunes application installer directory on your computer, which should be:
C:\Users\User\Music\iTunes\iTunes Media\Mobile Applications
In there are all your saved application installers (*.ipa files). You need to delete those actual installer bundles and then make sure to NOT allow the "transfer purchased content" when you sync or backup in iTunes (as that will just put them back on your hard drive).
One caveat to removing those, is that if you ever wish to keep a specific release of a particular app, and the developer replaces the iTunes/App store version with something else, your sole source for your older version will be your own stored copy of it. So for example, when PDF expert released their iOS 7 update, and charged everyone full price for it, if you wished to keep using the previous version on your own devices, then you needed to keep a copy of the installer on your own computer as that older version is no longer available in the store front.

How to get back the deleted request.

Hi BW gurus,
I was having a problem in ZFIGL_01 cube. 1 request was showing some error so i deleted that request without changing its status from green to red.
i then loaded the data again and now its not allowing me to activate that request in ODS because of that earlier request but when i go to reconstruct/insert tab its not showing the request which was deleted by me. Does that mean the request has been deleted from PSA also?
What will be the workaround in that case?
And in near future to avoid such kind of scenario what will be the settings required to be done so that i can see all the deleted requests in insert/reconstruct tab irrespective of the status of the request.
Now this will create problem from tommorrow onwards in my PC if it doesnt get solved. Kindly reply as early as possible.
Thanks
BW user.

hi,
Hope the upload is delta,
1. Goto TX: RSMO and identify the request.
2. change the request to Red/Green.
3. Reload the data.
suggestion: If it is a delta upload, Check the timestamp at R/3 or ERDATE before reload.
Regards,
Vijay

When I plug in my ipod shuffle(early model) the songs do not appear on play list. Play list shown is wrong.Any ideas?

When I plug in my ipod shuffle { early model } the play list that appears does not show what is actually on my ipod. Some I had deleted before and some songs that I have never had on my ipod. appear on the list I do not knw via the computer what is actually on my ipod. Any suggestions. Why cany itunes leave things alone. If it aint broke dont mend it. This has only happened since I down loaded the latest itunes.

Make sure that your music is in the format supported by the iPhone. I use either MP3 or AAC.
A friend had the same problem a while back. All his music was in the WMA format and is therefore not playable on the iPhone and would not copy. Once he converted his songs to MP3 they copied to his iPhone without problem.

Cancelled PO still appeared in ME28 list.

Hi Experts,
Last time I have several POs that were not released yet.
But a few of POs was cancelled by user.
I was checking the transaction ME28 Release Purchasing Doc list, I found the list of POs is still waiting to be released. Those POs actually was cancelled, so it should not need to be released.
How can I delete the list of cancelled PO from ME28 list?
Kindly advise
Thanks in advance,
rob

Hi
If you can revoke the release strategy for all the cancelled PO's then they will not be appearing in the list.
For example if your release strategy is based on Value, you can flag off all the PO items as free goods. By doint this the release strategy will be redetermined & the sytem may not find a release startegy.
find a combination for which no release strategy will be deermined & use that ion the cancelled PO's
Try doing this....
Thanks & Regards
Kishore

Error while deleting request from DSO: S:RSODSO_ROLLBACK:259

Hi,
While deleting request from DSO, we face following errors:
S:RSODSO_ROLLBACK:259 129 transaction rolled back by an internal error: fail
Message no. RSODSO_ROLLBACK259
Job is getting completed with message:
Deletion of request REQU_3HHPSMIMMVRF87FI0EGC5CS4B from data target ZPR_ODS failed
Deletion of request REQU_3T80EDOBQR7CWSC8QKKHAMH5N from data target ZPR_ODS failed
Deletion of request REQU_8JIMF8SRDOG0T3QG6AGRA63Q3 from data target ZPR_ODS failed
Deletion of request REQU_CMCCHOZGOF3KXNMVXB94ZHMCB from data target ZPR_ODS failed
Deletion of request REQU_BPCAB8LY6V4CMC3XQ12AWN7MJ from data target ZPR_ODS failed
<Message short text RSODSO_ROLLBACK 259 does not exist>
Parallel processes (for Rollback); 000003
Timeout for parallel process (for Rollback): 000600
Package size (for Rollback): Dependent on Activation
Task handling (for Rollback): Backgr Process
Server group (for Rollback): No Server Group Configured
Job finished
FYI:
Kindly help us to resolve the error.
Regards,
Antony Jerald.

Hi Dinesh,
Thanks for your reply.
We have Netweaver 7.30 with BW on hana on SP 9.
First 3 SAP notes doesn't meets the need.
Shall I use 1007717 note?
Which says:
use transaction SE16 to delete all entries for this request and for this Operational Data Store (ODS) object from the RSICCONT, RSMONICDP, RSODSACTUPDTYPE and RSODSACTREQ tables. Then set the 'from-date' in the administration of the data target to a value older than the oldest request loaded in this ODS object. Choose 'Refresh'. This corrects the administration.
Will it resolves the problem?
Kindly suggest.
Regards,
Antony Jerald.

IPod Nano appears on my list of iTunes devices. Summary tab shows 928 manually managed songs; music tab however shows nothing. Where did the songs go?

I recently undated software all around, reloaded windows 8 and upgraded to windows 8.1. My iPod Nano (1.0.4) appears on my list of iTunes (11.1.3) devices. The summary tab for my iPod shows 928 manually managed songs (2 of 8 GBs still empty). However, when I click on the music tab immediately to the right of the summary tab, iTunes no longer shows my songs, playlists or audio books. Instead iTunes invites me to "sync" my iPod and kiss my contents goodbye. Why won't the songs appear in iTunes anymore? My iPod still plays the songs and they appear on the tiny iPod screen. iTunes however won't show them. iTunes still allows me to drag and drop new music and books into my iPod but iTunes won't let me see the particulars. I want to delete some audio books I've finished but iTunes won't let me to them. What gives?

Thanks iPodmaven for showing me how to check the arrow to the right of the device image and convert it into a inverted triangle. Problem solved! Thanks

I need to reset my security questions, I don't have a rescue email and I live in Lebanon (Does not appear in the list of countries for apple calls)

Hi,
I forgot my security questions and I don't have a rescue email setup.
I serached the internet and the only solution I found for that is to call apple. The proble is there is no phone to call, they have to call you and there is a list of countries.
I live in Lebanon and it does not appear in the list of countries listed for apple customer support call.
How can I reset the security questions.
thank you

The Three Best Alternatives for Security Questions and Rescue Mail
    1. Use Apple's Express Lane.
          Go to https://expresslane.apple.com ; click 'See all products and services' at the
          bottom of the page. In the next page click 'More Products and Services, then
          'Apple ID'. In the next page select 'Other Apple ID Topics' then 'Forgotten Apple
          ID security questions' and click 'Continue'.
     2. Call Apple Support in your country: Customer Service: Contact Apple support.
     3. Rescue email address and how to reset Apple ID security questions.
A substitute for using the security questions is to use 2-step verification:
Two-step verification FAQ Get answers to frequently asked questions about two-step verification for Apple ID.

Mail messages in my In Box are not appearing in the list of messages.

Mail: SOME mail messages in my In Box are not appearing in the list of messages. Instead, there's a blank line in its place if already read, or just the blue dot if unread. But when I click on the line, the message's column/header detail appears (and I can open it).
(Coincidental or not, immediately prior to this situation, I established a New Rule that mail coming from my son's email address should be Moved to the IN Box as they had been going to Trash. None of the emails I'm questioning have any reference to his email address in them.)

Continuation of info (from GDTGG): When I leave that mail message and click on a different one, the blank line marking its place once again appears for the message. (There was a similar problem posted by someone else in 2009 entitled "Inbox Has Blank Lines" but with no apparent solution that I could find.)

Trying to update iPad mini. Old email continues to appear and can't authenticate. How to remove it totally and use my iCloud I.D.?

Trying to update iPad mini. Old email continues to appear and can't authenticate. How to remove it totally and use my iCloud I.D.?

If you have any apps that were acquired with the old ID they will always be tied to that ID. Delete them and reacquire them with the new ID that you have in Settings > iTunes and App Store

Album artwork does not appear in album list or grid

I added album artwork (did get info then copy and paste) and it shows up fine in cover flow but does not appear in album list or grid view.
What am I doing wrong? Artwork files were scanned from album covers that I have.

Your album artwork cache may be corrupt. Provided most, if not all, of your artwork is embedded you can simply delete the Album Artwork folder that you will find inside your main iTunes folder and then scroll slowly through the library in Grid/Albums mode to rebuild it. Any images that were "downloaded" rather than embedded will need to be reacquired.
Threre are separate folders for the downloaded and cached images, but I've always gone for a complete rebuild so I don't know it would work to delete just the cached folder.
tt2

Deleted Request continues to appears in ODS list of requests RSODSO_ROLLBAC

Similar Messages

Maybe you are looking for