Deleted SAPscript page still prints

Hello,
I have a check form with FIRST and NEXT pages. There was a LAST page that I didn't need so I deleted it. The checks are still printing with this last page. Any ideas as to how and why?
Thank you,
JR

Hi Joseph,
have you activated the script after the deletion of the page.
many times this happen with scripts.
Reward points if useful.
Regards,
Atish

Similar Messages

SAPscript pages not printed correctly

Hi all,
I am facing a problem in SAPscript. The problem is while I am checking the form in the Print preview, I get only one page as required(I have designed only one page) but when I print it I am getting two additional pages with my required page.
Can any one guide me as to what might be the problem??
Thanks,
Susanth.

hai Susanth Swain,
In Basic settings maintain NEXT Page As First Page .
Regards.
Eshwar.

Sapscript bottom text in Main, just for the last page, but printing only in the last page

I need to print a text but only for the last page in the main window.
I have tried with IF.
IF &PAGE& = &SAPSCRIPT-FORMPAGES&
BOTTOM
....TEXT
ENDBOTTOM
ENDIF
But it prints in all pages in every main window.
Can someone point me what I am doing wrong or how can I do this?
Regards,
Carlos

Hello Carlos,
the problem with this condition is the following.
The Sapscript composer cannot know during the processing of e.g. the first page,
how many pages will follow. So &SAPSCRIPT-FORMPAGES& still contains the same
value like& PAGE& and is filled with the correct values only at the very end of the processing.
(when the total number of pages is known).
So I suggest you to use the BOTTOM command in the print program,
when the processing of all item of the MAIN window is ended.
There is an other variable &NEXTPAGE&. &NEXTPAGE& will always be 0
when it reaches to last page to print. The problem with this variable that
it can not be used in a condition in MAIN window too, only in a separate page window.
Regards,
Hedvig

I am trying to print a PDF file to a legal size paper and I would like for it to fill up the page. How do I do this? I went into the settings and changed it from letter to legal, but it's still printing out the same size. Can someone help me, please?

I am trying to print a PDF file to a legal size paper and I would like for it to fill up the page. How do I do this? I went into the settings and changed it from letter to legal, but it's still printing out the same size. Can someone help me, please?

Are you trying to Print to PDF or are you trying to Print a PDF file to a physical printer?

I am trying to delete pages I have crated in numbers, but can only see them in print preview. Without print preview I do not see them. How can I delete these pages, but keep others before and after?

I am trying to delete pages I have crated in numbers, but can only see them in print preview. Without print preview I do not see them. How can I delete these pages, but keep others before and after?

Hi Crushed,
Numbers doesn't have pages. It has a canvas that holds objects such as tables and charts.
Drag the objects from the bottom of the canvas onto the white space above. That will reduce the number of "pages" (sheets of paper) that will print.
Regards,
Ian.

The last page i printed still in the monitor next to the icons

The last page I printed still in the monitor next to the icons lake a big picture.

Hello ovd,
I want to make sure you get some help for your issue. To do that I need you to provide the type of printer and computer you are using.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

I select "reverse" and printer still prints from page 1; how do I print the last page first, etc

I select "reverse" so the printer will start printing on the last page and end on the first and it still prints from page 1 leaving me to cplace all the pages in order manually. How do I do this. My last HP had no problems; I have a 6100
This question was solved.
View Solution.

Please try this:
Enter Control Panel > Devices and Printers.
Right click the printer icon, click Printing Preferences.
Select the Advanced tab.
Set the Pages Order as Front to Back.
Additioanlly, verify the same setting apply for the used program as customized preferences may kept for a specific program:
Open the File you would like to print, the click File > Print.
Click Preferences and verify the page order set as Front to Back.
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Background color still prints even though Page Preview: Options is unchecked

The Options button in Page Setup (to print out the actual background color), is NOT checked. This should cause the page to print with a white background. The web page I printed had a green background; as did the page I printed out. How do I prevent this as it wastes a lot of ink?
This seems to happen whenever the web page doesn't have its own background color and so either uses mine (green) or the system colors (background color is a light salmon). How do I get it to print out with a white background?

Trying to wrap my brain around this one.
Many programs? Are you printing different files or they same file? Is it a PDF?
If PDF and in Acrobat, have you checked the page setup (CommandShiftP).
This will let you know what size of paper Acrobat is expecting to print to.
In the bottom left corner of your screen is the status bar which should show the size of the page in your document. Does this match the sheet size you are printing to? In your preview of the Page, are you seeing the entire page or is the view zoomed in?
Sorry for all the questions but I'm trying to figure out what is going on. Acrobat can be down right nasty when it wants to.
Let me know
Karch_77

Ink wasting because pages with dark backgrounds still print despite background print checkbox being unchecked

I am visually handicapped and have Firefox set up in the colors to force black background white text. My computer is set up like that too by uncheckable the allow web pages to choose colors and checking use system colors. If go to print a page with a dark background or use the color setting mentioned above. My pages print with the dark background despite the Print background box being unchecked. This problem cropped up as of Firefox 4.x.

That could be a bug, or it could be by design. I'm not sure.
Studying a workaround and will report back...
Okay, here's the workaround. I think it's actually better looking than the built-in solution, but you can be the judge. (On further thought, maybe it's a bit extreme...)
First, you need an add-on named Stylish. Stylish lets you restyle any page. You can install it here (you will have to restart Firefox and enable the add-on if it isn't automatically enabled): [https://addons.mozilla.org/en-US/firefox/addon/stylish/ Stylish :: Add-ons for Firefox].
Second, you need a "userstyle" named [http://userstyles.org/styles/48319/browser-and-page-white-on-black Browser and Page - White On Black]. As the name suggests, the text is white and the background is black, but because it is applied as a style, you can turn off the black background in Page Setup. (I tested it today, but I can't vouch for it being the same if it has been updated.)
Check the box under Tools > Options > Content > Colors to let sites set their own styles, then check some pages (and Print Preview) to see how you like it.
Does it work for you?

Deleting unwanted pages when creating a photo album

I am in the middle of creating a wedding album and have unwanted pages. I have tried highlighting a page in the "ribbon" on top of the page and then hitting the delete key but the unwanted pages still do not go away. I am using a iBook G4. Any suggestions? Thanks.

Stephen
Welcome to the Apple user discussion forums
In iPhoto albums are virtual things used for organizing your photos
- I assume you are making a book to print. How many pages do you have? There is a minimum of 20 pages so unless you have 22 pages of more you can not delete pages
LN

Photo Book: Alert Symbol/Deleting Blank Pages?

Greetings,
Two questions:
(I'm assembling a photo book for the first time...)
1. What does it mean when there's a small yellow alert symbol (a yellow triangle) in the upper right corner of my image?
2. How do I delete blank pages from the end of my photo book? I've created too many...
Thanks!
-Mark

It means your photo is below 180 dpi
LN
PS you may find a couple of things useful
1 - iPhoto have a neat system called HELP - click on the HELP menu and ask your question
The reaults for "Yellow Triangle" includes the following
If you see a low-resolution alert
A digital photo is made up of millions of individual dots of color, called “pixels.” A photo’s “resolution” is the number of dots per inch (dpi) that it contains. The higher the resolution, the more dots per inch. Some photos look jagged or blurry when printed if their resolution is too low.
When you include low-resolution photos in a book, calendar, card, or print order, an alert symbol marks those photos.
To improve a photo’s print quality:
Choose a smaller print size. In a book or calendar layout, you can do this by increasing the number of photos per page.
If you previously cropped the photo, revert to its original version, and then crop off a smaller portion, or leave it uncropped.
If you positioned a photo within its frame by zooming in on it, zoom out of the photo.
If you continue to see a low-resolution alert after trying these methods, you can still order prints of the image or include it in your book, calendar, or card, but it may not print as clearly as your other photos.
Related Topics
Cropping photos
Zooming in and out of a photo
Changing the design of individual pages in a book
Reverting to the original version of a photo
Was this page helpful? Send feedback.
2 - there are some great tutorials that will make your life much simpler and improve your understanding of iPhoto (and other Apple products)
http://www.apple.com/findouthow/photos/#books

Deleting blank pages

Just spent an hour+ on the phone with a product specialist regarding this problem. Never, ever should something so simple be so difficult...
This is what worked for me, and should for you, too. It is basically a blow-by-blow of what Peggy attempts to describe in her post--which in theory is separating an entire Pages document into individual "pages".
1. For ease of viewing, reduce view to 25-50%.
2. Go to View>Show Layout.
3. Go to View>Show Page Thumbnails.
4. Go to the blank page that you want to delete in the regular view screen. (For sake of my example, it is page 3 of a 5-page Pages doc.)
5. Start at bottom R of blank page and mouse-click-drag toward L top of page. This should highlight a blue bar along the top margin or a series of paragraph place holders.
6. Delete (and don't worry that all your text has separated from the layout of the rest of the doc or pulled up, the next step should remedy that.)
7. Go to Insert>Section Break. (Yes, it will add in the deleted page again.)
8. Next, go to page 2 (page preceding the page you want to delete, repeat highlighting click as per step 1.)
9. DO NOT press DELETE this time, but go directly to Insert>Section Break.
10. Now, click on your thumbnails view. Your page three should now stand alone in its own yellow box, meaning it is its own section.
11. With that blank page highlighted yellow, you can either delete or go to EDIT>Delete Pages. This should get rid of the blasted blank page.
12. Check the remainder of your doc to be sure no other pics or text have "disappeared". I've seen such postings, and it happened to me on the first pass.
CAVEAT! Check the remainder of your doc to make sure photos and text are still present WITH EACH STEP. In the first trial run of this fix-it, random pics toward the end of my doc were gone. Thankfully, I hadn't saved, so I quit out without saving, thus recovering what appeared to be lost.
Finally, it seems the default on this program should be that each individual page stands on its own. This same issue of lumping all the pages in one Pages doc. becomes more of a problem when you want to shuffle or work on layout, swapping out spreads, etc.

Can you describe a bit more - remember we know nothing except what you tell us
To see exactly what will be printed preview via this method - http://support.apple.com/kb/HT1040 - and save the resulting PDF for reference
a book must be 20 pages (10 sheets of paper) - you can not delete pages below that limit
to delete a page select it and use the delete page command
To add a photo or text to a page select the page and change the layout for that page (in the tool bar below the book)
Do these shots in the dark help?
LN

Page numbers from MS Word cannot be deleted in pages

A colleague sent me a MSWord (Mac) document that I opened in pages 09 and started working on it. I need to delete the page numbers that were put in on the MSWord document. I guess they were put in using the automatic page numbering feature in Word. However, In the Pages09 document they are not in the usual footer location. It almost looks like they are part of the page background. They are not selectable and cannot be removed. It I choose to add page numbers using Pages, they numbers appear in the usual footer location—in addition to and not supplanting– the unselectable page numbers brought over from MSWord. Does anybody know a solution to this?

Loren,
The persistent content usually is a Master Object. So, you were right to begin with: Format > Advanced > Make Master Objects Selectable. One would think that if this is always the solution, it would be a simple matter to now select the tenacious item and delete it. The problem is that sometimes the object while now selectable is still not accessible.
This Master Object can hide behind the Header box, as though the Header was a solid glass wall. Deselecting the Header function, in the Document Inspector, will give you access, but it will also irretrievably delete your Header Content. A better way, I have found, is to change the header Margin figure in the Document Margins Pane of the Document Inspector.
Once you have moved the Header, Footer, or whatever else might be sharing the space, off the persistent page number, you can click on the page number Object and hit Delete. Now you can put back whatever you had to move, and you should be good to go. Consider yourself lucky if your Pages header doesn't fall over the old Word Header.
Jerry

Unable to Communicate with Printer message, but still prints

I installed a new ENVY 4500 printer on my Windows XP system. and it there are two problems:
1. when I try to print, it tkes some time, then a message window appears with "unable to communicate with printer", but it still prints. I have uninstalled the printer and the drivers and reinstalled, but to no avail.
2. I have a Seagate GoFlex USB backup drive attached. However, when the printer is connected, the Seagate drive disappears. It happily coexisted with my former HP C4100 printer for years, but the new one seems to cause problems.

I solved the problem. I purchased a new USB cable for the printer. I deleted the printer, uninstalled the print drivers, and completely reinstalled the printer. At first the installation did not work, but I discovered the USB cable was not completely inserted into the printer. Initially it felt like it was, but I gave it an extra push and it clicked into place. At that point the installation completed successfully. Now the printer and the Seagate drive work properly.

When will there be fix for AirPrint in Yosemite? I cannot use my HP printer. I have uninstalled/resinstalled everything you can think of. I have deleted and added my printer more time than I can count. I have checked for updates. Nothing has worked.

When will there be fix for AirPrint? Since upgrading to Yosemite I cannot print from my MacBook Air which I use mostly. (I can print from the my old 2005 G5 desktop and iPad2 just fine on the same network.) I could print just fine when I had Mavericks. I have tried EVERYTHING under the sun: resetting print system, deleting and adding the printer, checking for updates, uninstalling and reinstalling printer software and folders, turning off modem, router etc. NOTHING works.
The laptop shows that it is printing but nothing happens. Then it says it cannot locate the printer or there is a broken pipe. But it does tell me that I have a low level in one of the ink cartridges (which is true.)
Help! I have warned everyone I know not to upgrade. Is there a way to go back to Mavericks?
MacBook Air (mid 2012), OS 10.10, HP Officejet 7500a

This is what appeared on Console:
11/12/14 12:42:32.558 PM com.apple.preference.printfax.remoteservice[3099]: <NSViewServiceMarshal: 0x7fa398514bd0> failed to complete rights grant 6B212CA9-7872-4726-BA05-68BD5C994479 due to 3
timestamp: 12:42:32.557 Wednesday 12 November 2014
process/thread/queue: com.apple.preference.printfax.remoteservice (3099) / 0x7fff78cb4300 / com.apple.main-thread
code: line 834 of /SourceCache/ViewBridge/ViewBridge-99/NSViewServiceMarshal.m in -[NSViewServiceMarshal invalidateWindowRights]
#exceptions
11/12/14 12:42:32.598 PM com.apple.xpc.launchd[1]: (com.apple.preference.printfax.remoteservice[3099]) Service exited due to signal: Killed: 9
11/12/14 12:42:37.845 PM com.apple.appkit.xpc.openAndSavePanelService[3298]: assertion failed: 14A389: libxpc.dylib + 97940 [9437C02E-A07B-38C8-91CB-299FAA63083D]: 0x89
11/12/14 12:42:37.879 PM sandboxd[246]: ([3295]) Pages(3295) deny file-read-data /Users/Mom/Downloads/CONM 136 - Study Guide Test 3 (2014).docx
11/12/14 12:42:37.971 PM sandboxd[246]: ([3295]) Pages(3295) deny file-read-data /Users/Mom/Downloads/12%20angry%20men.docx
11/12/14 12:42:38.033 PM sandboxd[246]: ([3295]) Pages(3295) deny file-read-data /Users/Mom/Downloads/Quiz%20#2.docx
11/12/14 12:42:39.712 PM sandboxd[246]: ([3295]) Pages(3295) deny file-read-data /Users/Mom/Downloads/12%20angry%20men.docx
11/12/14 12:42:39.000 PM kernel[0]: Sandbox: Pages(3295) deny file-read-data /Users/Mom/Downloads/Quiz%20#2.docx
11/12/14 12:42:39.748 PM sandboxd[246]: ([3295]) Pages(3295) deny file-read-data /Users/Mom/Downloads/12%20angry%20men.docx
11/12/14 12:42:39.850 PM sandboxd[246]: ([3295]) Pages(3295) deny file-read-data /Users/Mom/Downloads/12%20angry%20men.docx
11/12/14 12:42:39.874 PM sandboxd[246]: ([3295]) Pages(3295) deny file-read-data /Users/Mom/Downloads/Quiz%20#2.docx
11/12/14 12:42:39.945 PM sandboxd[246]: ([3295]) Pages(3295) deny file-read-data /Users/Mom/Downloads/Quiz%20#2.docx
11/12/14 12:42:41.000 PM kernel[0]: Sandbox: storeuid(3051) deny mach-lookup com.apple.dock.server
11/12/14 12:42:48.968 PM WindowServer[132]: WSGetSurfaceInWindow : Invalid surface 702894100 for window 1378
11/12/14 12:42:48.968 PM WindowServer[132]: WSGetSurfaceInWindow : Invalid surface 702894100 for window 1378
11/12/14 12:43:17.000 PM kernel[0]: Sandbox: storeuid(3051) deny mach-lookup com.apple.dock.server
11/12/14 12:43:23.225 PM com.apple.xpc.launchd[1]: (com.apple.quicklook[3316]) Endpoint has been activated through legacy launch(3) APIs. Please switch to XPC or bootstrap_check_in(): com.apple.quicklook
11/12/14 12:43:24.355 PM WindowServer[132]: disable_update_timeout: UI updates were forcibly disabled by application "PrinterProxy" for over 1.00 seconds. Server has re-enabled them.
11/12/14 12:43:24.946 PM WindowServer[132]: common_reenable_update: UI updates were finally reenabled by application "PrinterProxy" after 1.59 seconds (server forcibly re-enabled them after 1.00 seconds)
11/12/14 12:43:34.503 PM mdworker[3319]: code validation failed in the process of getting signing information: Error Domain=NSOSStatusErrorDomain Code=-67062 "The operation couldn’t be completed. (OSStatus error -67062.)"
11/12/14 12:43:34.514 PM mdworker[3320]: code validation failed in the process of getting signing information: Error Domain=NSOSStatusErrorDomain Code=-67062 "The operation couldn’t be completed. (OSStatus error -67062.)"
11/12/14 12:43:34.604 PM mdworker[3318]: code validation failed in the process of getting signing information: Error Domain=NSOSStatusErrorDomain Code=-67062 "The operation couldn’t be completed. (OSStatus error -67062.)"
11/12/14 12:44:38.628 PM sandboxd[246]: ([3051]) storeuid(3051) deny mach-lookup com.apple.dock.server
11/12/14 12:44:41.384 PM locationd[63]: Location icon should now be in state 'Active'
11/12/14 12:44:44.653 PM sandboxd[246]: ([375]) com.apple.metada(375) deny mach-lookup com.apple.cfnetwork.cfnetworkagent
11/12/14 12:44:44.793 PM sandboxd[246]: ([375]) com.apple.metada(375) deny mach-lookup com.apple.cfnetwork.cfnetworkagent
11/12/14 12:44:45.149 PM sandboxd[246]: ([375]) com.apple.metada(375) deny mach-lookup com.apple.cfnetwork.cfnetworkagent
11/12/14 12:44:56.515 PM Console[3327]: Failed to connect (_consoleX) outlet from (NSApplication) to (ConsoleX): missing setter or instance variable
11/12/14 12:44:56.641 PM locationd[63]: Location icon should now be in state 'Inactive'
11/12/14 12:44:56.834 PM sandboxd[246]: ([3051]) storeuid(3051) deny mach-lookup com.apple.dock.server
Not sure what any of this means.

Deleted SAPscript page still prints

Similar Messages

Maybe you are looking for