Deleted Sections of Video Remain In .MOV File

Hi I am new to this forum and wonder if I may ask a question regarding QuickTime Pro v7.5.5.
I have recently taken a video clip using my Kodak DX7440 digital camera and have used QuickTime Pro v7.5.5 to delete a few seconds from the start and end of it.
This works fine within QuickTime itself, and the deleted clips are absent as desired, but when I go to Nero Vision (v7) to burn the video clip to a DVD, the deleted sections are still there, and I find this quite annoying, as I then have to perform the edit all over again before burning.
It seems the deleted sections are still within the .MOV file. Is there any way to get rid of them completely ?
Many thanks in advance for advice.

Thanks for reply - but the Undo is greyed out, and doesn't affect it. I also tried Export but when playing the exported file I got a green colored still video picture displaying (but with sound OK). I suspect there is a bug of some kind causing my problem.

Similar Messages

  • Restoring Deleted Sections of Video In Quicktime Pro 7

    Does anyone know if you can restore the deleted sections of video in quicktime pro. I selected in & out points on a video then clicked save, instead of save as,(did not mean to do that) and it deleted most of my video, when i did not want to delete, just pull out the section where my in & out points were.
    So I'm trying to restore the orig. video and that was the only copy, so I have no where else to go and retrieve it. If anyone would know if it is possible to restore the video you have cut but forgot to save orig. file. I would appreicate any help on this.. Thx....

    IF I use system restore to a restore point before I cut video would that possibly get original video file back? Reply from quicktimekirk says it's gone for good,but not sure if he has ever tried the system restore to get back to a time before video was cut. Any help greatly appreicated,I only had 1 original file copy of video file I'm trying to restore. I did back it up on dvd when first recorded,so I still have that, but I'm trying to restore the original .mov video file. Thanks and I'll remember from now on to back up any file I'm working on. Thanks again..........

  • How do I get premiere elements 13 to read the video of my .mov files?

    I am working on a PC.  How do I get premiere elements 13 to read the video of my .mov files? I hear the audio but don't see any video.Thank you.

    phyllism
    Thanks for the reply. Glad that QuickTime install resolved the Premiere Elements 13/13.1 video playback problem.
    When you double click any of the thumbnails for your .mov file in the Elements Organizer 13/13.1, does the Elements Organizer 13/13.1's player open to play back the .mov file contents for both video and audio?
    You wrote
    in the browser, the preview is an audio file, not a QT preview.
    I was not sure if you were just going by what appears in the thumbnail, namely film strip with music note, or whether you had gone through the actual playback there. In the Apple Pro Res footage that I have, I get the same thumbnails that you are seeing for Windows Explorer. In Elements Organizer 13/13.1, the thumbnail for my Apple Pro Res file is just a film strip on gray.
    I think what you are seeing is "normal" for the situation. But, please verify your observation with 13 updated to 13.1 if you have not done that already.
    Thanks.
    ATR

  • Trouble with video playback on .mov files. Please help!

    I have some .mov files that were transferred onto a USB and they're not working properly. The audio during playback works fine but the screen remains black for the entire video. There are 45 videos and all have the same issue. Already tried them on QuickTime (latest version), Windows Media Player, Divx, Movie Maker and Powerdirector. Nothing seems to be working. Tried downloading a couple of Codecs as well.
    It's probably something really silly but I'm out of ideas. Anyone?

    Hi Bazookajoe117,
    As already suggested by Jacumba your symptoms point to a lack of required codec in your system.
    Take a look at below post to find out the commonly used codecs in QT that would allow you to play the files without any issue.
    QuickTime Codecs Installation
    Regards,
    ---Javier
    I may receive some form of compensation, financial or otherwise, from my recommendation or link.

  • Deleting sections of Video

    So I highlight a section of my .mov file in QT pro 7 with the arrows and delete, but it deletes a large chunk after the right arrow.  How do I delete JUST the section that I highlighted?
    Thanks!

    So I highlight a section of my .mov file in QT pro 7 with the arrows and delete, but it deletes a large chunk after the right arrow.  How do I delete JUST the section that I highlighted?
    What kind of files are you editing? This could also be a GOP issue. QT normally marks/edits/processes GOP (Group of Picture) content on the nearest I-frame. If this is the problem, then depending on your goals and/or required workflow, you have two options:
    1) The first option would be to convert the GOP content to an all intra-frame or more modern compression format in which can mark/edit/process any frame individually, or
    2) Use a GOP edit compatible application for marking/editing/processing the GOP content. Normally, I would recommend trying MPEG Streamclip (free).

  • Extracting video metadata from .mov files using QuickTime SDK for Windows

    I'm trying to create a service which will process .mov files and extract some statistical information from it, such as length, bitrate, video height / width , and if it's possible info about audio, such as audio levels number of channels etc.
    I've downloaded a sample application which came with SDK and it uses a visual control (Asp.net) to load file url into and then extracts a Movie object which has most of the info I need.
    problem:
    I don't have ability to load a visual control as my program is a service application. Can someone tell me how it's possible to load movie object without using visual control and fetch all the metadata I need.
    Thanks
    shorkun

    QT does not export sound from muxed mpeg files: QT Mpeg Limitations. This freeware should do the trick: Mpeg StreamClip
    If the mpegs in question are mpeg-2 you will need to buy the mpeg2playbackcomponent from Apple ($20 US). Note that these programs will not work with encrypted Hollywood movies.

  • How do i delete sections of video and audio at the same time

    hello, i made a video with sound and overlapping voiceover i want to know how do i delete a section of the video and the voice over without having to resynch everything again?

    In Final Cut Pro X, this is easy. You drag to select all these clips. Then use the Blade Tool.
    However, in iMovie, it is not as straightforward. You can edit the camcorder clip and its audio, but any music tracks, voiceover tracks, etc. will not be edited with it.
    A workaround is to use the SHARE menu to SHARE/EXPORT TO QUICKTIME using Apple Intermediate Codec to retain as much quality as possible. Then import this new movie into an Event. New all the audio is married to the video and you can edit everything together.

  • Phone made videos exporting as .mov files instead of .mp4

    My phone made videos used to be exported as mp4 files, which my dell computer was able to play correctly.  The videos are now exporting as .mov which only gives me the audio in the download to pc.  Do you know what I need to do to fix the problem?
    Thanks

    Thanks
    Is there any way to have my verizon iphone just make .mp4 files the way my AT&T iphone used to do?
    I am guessing it is something to do with the carrier change that is causing the problem . My old phone and new phone are both iphone 4s
    Thanks again

  • QT pro question about direct video capture to mov file

    I am thinking about buying QT pro because I would like to record video directly from my Sony mini DV camcorder to a QT file. Can you control the destination of the QT file being created to a second HD or flash drive? I don't want to capture video and fragment my macbook pros HD. Second can you control the size of video being captured? I don't need to have full screen video and would like to save HD space on my secondary drive.
    Thanks for any help.

    Can you control the destination of the QT file being created to a second HD or flash drive?Yes, see the "Preferences > Recording > Save Files to:" option.
    I don't want to capture video and fragment my macbook pros HD. Second can you control the size of video being captured?Size is tied to the "Quality:" pop-up options. (Good -- 320 x 240 MPEG-4 video and AAC @ 128 Kbps, Better -- 320 x 240 H.264vide and AAC @ 128 Kbps, and Devie Native -- raw DV audio and video standard.)

  • How cat I speed up video "Share" from iMovie library in to .mov file?

    How cat I speed up video "Share" from iMovie library in to .mov file?
    I am converting ONLY 18 sec. long video, and it says 88 min. till its completeion. ???
    I have over 1TB of free space and my mac specs are:
    Processor  2.2 GHz Intel Core 2 Duo
    Memory  4 GB 667 MHz DDR2 SDRAM
    Graphics  NVIDIA GeForce 8600M GT 128 MB

    Using iMovie Version 10.0.2 (Mavericks) and importing HD 1920x1080 since I am not interested in any smaller quality.
    in other words, I would like to be able to import videos from my camera (highest available quality) which could be played on QuickTime.
    Is there any way I can avoidaving my videos saving in " iMovie Library.imovielibrary" ???
    I am interested in having my videos as (1920x1080 .mov) file and no other.

  • Conversion of ACVHD video to .mov file

    How do I convert video ACVHD video to a .mov file so that I can make it compatible to use on a MAC?  I have a P.C. at home, where I edit on
    Premier Elements, but the studio uses MACS.  I know a .mov file is compatible with a MAC.  Correct me if I'm wrong.

    sca-tv
    What version of Premiere Elements is involved here?
    Am I correct that you are talking about use of a file exported and saved to hard drive in Windows? We are not talking about using a project.prel created in Premiere Elements Windows and trying to open that in Premiere Elemens Mac? That is a not go.
    AVCHD is a video compression type often designated MPEG4 AVC/H.264. What is the file extension (wrapper for AVCHD), .mp4, .mts, other?
    Without more information about what you have, I am not sure that you need to convert what you have to anything else for import into Mac. What are the properties of what you have:
    Frame Size: 1920 x 1080 or other
    Frame Rate: 25 or 29.97/30 interlaced or progressive frames per second
    Scan Type: Interlaced or Progressive
    Pixel Aspect Ratio = Square Pixels (1.0) or other
    File Extension: .mp4 or other
    Based on that information and provided that you have the latest version of QuickTime installed on Windows and Mac...
    AVCHD.mov
    Publish+Share
    Computer
    QuickTime
    and set Presets = NTSC DV 16:9 with customization to the required properties under the Advanced Button/Video Tab (video codec = H.264) and Audio Tab (audio codec = AAC or other).
    If you have AVCHD.mp4, give that a try as is in your Premiere Elements Mac.
    But more information is needed to fine tune.
    Thanks.
    ATR

  • Audio not in synch with video when mov files played in QT 7.6

    When I play .mov files stored in an iPhoto 08 photo library, the audio is not in synch with the video. People's lips move and the audio comes out a second or so later. This is a relatively new problem, and I don't have the same problem when I play .avi files. A couple weeks ago, the audio and video were good and they were synchronized. The video in the .mov files is also choppy. The video plays for a few seconds, briefly pauses, and then starts again.
    Appreciate any suggestions.

    I'm not sure this is the issue. The video files were never in iMovie. Only imported into the iPhoto libaray from my Kodak M1033 camera. A few weeks ago, I did not have an issue with .mov files playing smoothly. Perhaps there was a recent update to QT?
    When I upload the .mov clips to Flickr (www.flickr.com) or YouTube, they play just fine, so I'm not sure what the issue is.

  • IPhone photo/video library glitch - wrong file extensions, name shift, lost files etc [LONG story - sorry]

    I have a 5s running 7.0.4. and my computer is running Windows 8.1.
    We had a baby and my phone filled up fast with pictures and videos, so I decided to offload them onto my PC. I connected my phone to the usb port, and directly copied from the DCIM folder to my hard drive.
    Something happened during the first attempt, and the process was interrupted. So I went into each of the sub folders, and selected all files, and started the copy process again. I told the computer to skip any existing files.
    So all the file counts matched in each folder, and I figured it was safe to start deleting from my iPhone.
    On my hard drive, I separated all the MOV files into my Videos folder. But in Windows Explorer, the thumbnail view showed several MOV files with no thumbnail - just the generic icon.
    As I sorted my photos into various folders, I also noticed a lot of generic icons instead of thumbnails for the JPGs. I started to feel concerned that my files had become corrupt during the transfer. But then I noticed a PNG file that was a few hundred megabytes. This was odd, so I added the MOV extension to it. Sure enough, it was a video with the wrong extension.
    I renamed every PNG and JPG file that had no thumbnail to add the MOV extension. Every one was a video with the wrong file extension.
    Then I went to the video folder, and all the MOV files that had the generic icon were actually JPG files.
    Well I was just happy to see that the files were not corrupt.
    One more time before I deleted things from my iPhone, I did a spot check to see that the largest videos were on my hard drive. I found a few videos that were not copied over, despite the file counts having been accurate. So I copied the videos again, and compared file sizes and date/times when there was an overwrite prompt. Most were matches, but several were the same file name with different sizes and dates.
    I didn't know what was going on, but I just wanted to get the files on my computer. So I renamed my local copy where there was a name collision, and copied the videos. I deleted the videos from my phone as I went along.
    I felt pretty confident that I had all the files copied now, so I began mass deleting my photos.
    I went to the Photos app on the phone, and watched the thousands of pictures disappear, and the glorious free space grow on my phone.
    But wait... there was still 1 video in the Photos app. I thought I had gotten all the MOV files off the phone...
    I have a photo info app installed, so I was able to see the file name of the video. I searched for that file name in the DCIM subfolders, but the folder that had that series of files (the IMG_3000-3999 files) listed the files with that particular video skipped. It was clearly still on my phone, because I could play it.
    Then I noticed it was a 45 minute long video of my baby. About 5 GB. So I figured it must be due to the file size that it wasn't visible from explorer. (Can't explain why that would be, but M$ keeps changing crap too. I never freaking know what to expect from them either.)
    After having deleted all the jpg, png and mov files from the DCIM folder, there were still about 26 files in my camera roll on the iPhone. And I could still view the video.
    I decided I wasn't concerned about the photos, I just wanted to figure out how to get the video onto my computer.
    So I selected all the photos in the photo app (skipping the 1 remaining video) and tapped the trash can.
    Poof! One item remained, and it was one of the garbage photos. My video is GONE! ^#@*&#($^@Q&%( And no, I didn't fat-finger it. I was very careful to select the correct thumbnails.
    Looking back, I know that I should have just started the entire file copy process from scratch when funny stuff started happening like mismatched file names. But I am a sleep-deprived new mom and just wasn't thinking clearly. It would be nice if I could have used my file/directory compare program to check the iPhone against my laptop, but it is not compatible with devices, only removable drives.
    And no, I don't use iTunes. I stopped using iTunes years ago when it would randomly decide to delete contacts from my phone just because they didn't exist on my computer or some sh-- like that. I have always just manually synced all my stuff and have never had an issue like this. To say I am sad to lose that video is an understatement.
    I googled "iPhone undelete" and "iPhone data recovery" and downloaded a trial for one of the likely candidates. It turned up a bunch of garbage, but not my video.
    Anyways... I am wondering if anyone else has experienced this type of scenario? Has anybody identified what could cause this to happen? I would like to avoid this in the future. (I will avoid this type of loss, because I know now what I could have done differently to be more careful. But it would be nice if I didn't have to get all neurotic about checking 60GB of photos/videos side by side each time I copy them to my computer...)
    I have seen other threads on the forum here regarding corrupted libraries and such, but I am not sure this is the same thing.
    One suspicion I have is that it might have to do with the iPhoto app being installed on the phone. I can't articulate why I think that is worth considering. But when I looked at my Video folder, I ended up with many duplicate videos, and all the duplicated videos' file names were 2 numbers apart. As if all the file names got shifted at some point. Very strange.
    Thanks for listening to my rant. If anybody has an idea, I am interested. If anybody else has lost precious memories due to this, we should talk. If it is a widespread problem, maybe we can all get together and pound down Apple's door?
    As an aside: Why am I unable to select Apple Support Community to post this question to?

    In my case number of weird things happen whenever I try to copy pictures/videos from my iPhone from direct USB...
    1. JPG files are wrongly named as MOV and vice versa.
    2. I copy only folders but in addition files with no extension are copied in the main folder, very strange.
    3. Whenever I open one of the folders, strange icons like this () start appearing which cannot be copied even.
    Unfortunately I used to delete a lot of files with wrong extensions in the past because I never new they could be fixed.
    Apple should answer this!
    Note: I am using Windows 8.1 and use a direct USB cable without iTunes to copy the media files directly from My Computer.

  • How to view .mov files on ipad

    I use my iPad to store both jpg and mov files directly from my camera when on the road. I would like to be able to view the .mov files on iPad without the use of a computer. Is this possible?

    It depends what video codec the .mov files use. The video formats/codecs supported by the iPad are:
    H.264 video up to 720p, 30 frames per second, Main Profile level 3.1 with AAC-LC audio up to 160 Kbps per channel, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats; MPEG-4 video, up to 2.5 Mbps, 640 by 480 pixels, 30 frames per second, Simple Profile with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats; Motion JPEG (M-JPEG) up to 35 Mbps, 1280 by 720 pixels, 30 frames per second, audio in ulaw, PCM stereo audio in .avi file format

  • Exported .MOV file is faded like the gain or saturation was turned down.

    Hi,
    When I export a misic video as an .MOV file it is 1. extremely large and 2. faded like the saturation was reduced.
    Does anyone have settings for exporting MOV files of a 3 minutes music video so that it will come in under 415 MB.
    Could someone help me figure out how to compensate for the desaturation?
    Thank You,
    Mel

    Thanx Hunt for pointing me in the right direction,
    I'll research that.
    Mel

Maybe you are looking for