Deleted WLC from its folder under the Device work center of Cisco prime 1.2

I kindly need your help as regarding cisco prime infrastructure.
I added the wireless LAN controller to the prime. I later had to troubleshoot the WLC because the reachability status showed UNREACHABLE.
Due to my troubleshooting, I synched the WLC a couples of times and the collection status has been showing SYNCHING since then.
I also tried deleting the WLC from its folder under device work center and it deleted but it still reflects under the ALL folder.
Please would I have to wait for the SYNCHRONIZATION of the WLC to stop before I can completely delete it and re-add??
Also I noticed that after deploying ''Interface Health'' under Monitoring Configurations, the CPU and memory utilization did not reflect for the devices cisco
prime is managing.
What have I missed out?
Kindly help.

Prime Infrastructure won't support those legacy models.

Similar Messages

I have installed itunes 11.0.2.26. When I delete a file or podcast I am not being prompted to delete the file from its folder at the same time.

I have installed itunes 11.0.2.26. When I delete a file or podcast I am not being prompted to delete the file from its folder at the same time. How do I restore this facility? I am running a 64bit Windows 7 OS

Is the media files in question in the iTunes library or elsewhere on the computer?

After the last up grade not 5.0 I noticed that when I delete email from spam folder file the arrow does not snap to or move to the defalt button in a dialog box. I still use XP sp3. box

I don't know of anything else to tell.

Before trying anything else, do you have a recent backup of your profile folder?

Cisco Prime does not update devices in "Device Work Center"

Hi everyone.
I have a problem that is bugging me a lot.
I'm working in Cisco Prime 2.0 and we have a big problem.
If I run a discovery and find all a lot of switches, the switches is discovered and are fully managed via SSH and SNMP.
We are using both 2960S, 2960x and a lot of old 2950:s.
We are replacing all 2950:s to some new 2960 model.
The big problem is that when we replace the old 2950:s we reuse the same IP-address (so our customly built programs can find them again), Cisco Prime DOES NOT update the model of the switches. The switches are still in the Device Work Center and are still in recognized as a 2950.
If I mark the switch to view more info in Device Work Center the Unique Device Identifier says that it is a new 2960s/x but the model is still recognized as a 2950 so Prime can obviously find a manage the switch and update "some" info, but not the device itself.
Does someone have the same problem or do I need to delete all 2950:s and do a new discovery so Prime understand?
EDIT
I have now an example.
Please look at the image.

Hi,
I ran into same issue,Yes this is known issue,there is a open defect id and is fixed in upcoming releases.
I deleted existing devices and rediscovered,but note you will loose all your configurations related to existing deive model.
Regards

I am wanting to import photos from my imac to my ipad. the help page directed me to open the photo button under the device listing on itunes. There is not a photo button and I am connected to the computer. It does show buttons for books, movies, etc.

I want to import photos from iphoto to my ipad. The help button said to press the photo button under the device list. There isn't a photo button shown. Could it be hidden?

If you connect and select your iPad on the left-hand side of your computer's iTunes, on the right-hand side of iTunes (not on the left) there should be a series of tabs, one of which should be Photos - if you select that tab you can then select which photo folders or albums/events to sync to the iPad. There is a bit more info on this page. You will need to sync all the photos that you want on the iPad together in one go as only the most recent photo sync remains on the iPad - synced photos can't be deleted directly on the iPad, instead they are deleted by not including them in the next photo sync.

I delete some emails ,there are moved to trash . I delete them from trash folder too and they still appear in a folder called 'all messages". I repeat the same actions and after a while they appear again!what should i do to delete them permanently??

I delete some emails ,there are moved to trash . I delete them from trash folder too and they still appear in a folder called 'all messages". I repeat the same actions and after a while they appear again!what should i do to delete them permanently??

If you are using Apple's Mail app 6.5 is the latest version irrespective of what a previous poster says. It does sound though that you are using a gmail account online via a web browser. Please confirm and fill in missing information.

I deleted i photo from search folder, reloaded the software and now I can not drag and drop to the desktop. Help

I deleted i photo from search folder, reloaded the software and now I can not drag and drop to the desktop. Help

Look in the Applications folder to see if iPhoto is still there. If it is drag it back to the Finder Sidebar. If it is no longer in the Applications folder post back, you can also look in the Trash it might still be there.

I want to sync my ipad to my mac comp. It says to select ipad from under the device list. I do not get a device list however on my screen

I want to sync my ipad with my mac computer so I can import the data as a backup. It says to select ipad from under the device coliumn, but I do not have that column showing. What should I do?

The Devices Headings is on the left gray sidebar of iTunes when iTunes is running on the computer and the iPad is connected. I am using a very old version of iTunes but the sidebar is still the sidebar.
Here is a screenshot of the iTunes sidebar. I am at work and can't connect my iPad here but the Devices heading will be on the left side - under where it shows the Library, Store, Shared, etc.
If you don't see the iPad listed there - it is not being recognized in iTunes. Maybe you should look through this for help if the device is not recognized.
http://support.apple.com/kb/ts1591

How to open and save pictures from 1 folder at the same time?

Is there a way to open and save pictures from 1 folder at the same time?
I'm creating a vi that resizes the picture but I want to do it with 1 folder at a time... Is this possible?
greetings!

Hi Kway,
Here you are. I wrote a file a customer times ago & It did what you want!
Just see the attachements and keep me inform.
Regards,
Julien Roland - District Sales Manager
NI Belgium - Technical Support
Don't forget to rate a good answer
Attachments:
Test existing Files.vi ‏23 KB
Delete files from array of files (SubVI).vi ‏16 KB

I am new with iMac and I am trying to copy some file from my external HDD but it does not let me also I can't delete anything from this HDD using the finder. Can somebody help me , please?

I am new with iMac and I am trying to copy some file from my external HDD that a used with my PC but it does not let me also I can't delete anything from this HDD using the finder. Can somebody help me , please?

No, unfortunately, when you format a drive, it will erase all the contents. So you will need to find a temporary "storage" place to put the stuff using a PC so you have access to it. Then reformat using Disk Utility (Applications > Utilities). If only using with mac, format Mac OS Extended (Journaled) and use GUID Partition scheme under Partitions/Options. After formatting, you can drag the files back.

I transferred pictures over from my computer to my iPhone 5 and now i cannot delete them on the phone and cannot work out how to delete them from my phone by the computer?

I trasferred pictures over from my computer to my iPhone 5 and now i cannot delete these pictures from my phone, and i cannot work out how to delete them from my phone by the computer as the pictures do not show up in my files on the computer, how can i remove them i have over 400 pictures that need removing?

If you have a Mac with iPhoto, plug the iPhone in and open iPhoto. Choose to import the photos. Once they have been imported, there should be an option to "Remove Imported Photos from Device". Choose this.

How to draw a line of sin x and its area under the line?

Hi,
I know how to draw a line from two points. However, I do not know how to draw a line of function sin(x) and its area under the line. Anyone know where to read or how can I draw it, please help me. Thanks !!
Calvin

use Graphics2D:: draw(Shape)
create a class that implements Shape, and specifically the getPathIterator methods, in these methods you should return a path iterator that follows the sin/cos curve.
All fairly simple to do.
rob,

I have Lightroom 4 and my hard drive is getting too full wiht pictures i have in lightroom. I want to move many to a thumbdrive and delete them from lightroom. what are the steps to perform this please ?

I have Lightroom 4 and my hard drive is getting too full wiht pictures i have in lightroom. I want to move many to a thumbdrive and delete them from lightroom. what are the steps to perform this please ?

If you want to be able to view, edit and export from Lightroom you can move the files using your computer OS (explorer or finder) and update the folder location by right-clicking on the folder name in the LR Library. See fig 8 at the attached link:
http://www.computer-darkroom.com/lr2_find_folder/find-folder.htm
This will work when the thumb drive is connected.
If you really have no need to keep these files off-line in LR then simply move the files, select all the thumbnails in the LR Library and hit delete. Then choose remove.

Macbook Icon under the device column is gone.

I accidentally poofed the Macbook icon under the device column, and I can't seem to find it. The Macbook also had "(2)" appended after it. Mine looked like this: "Zachary Lawrence's Macbook (2)"
How do I get that appended (2) to go away, and how do I get the icon back into my side bar?

-Click on the Finder icon in the dock.
-From the menu bar, select Finder->Preferences
-In the toolbar, click on the Sidebar tab.
-Check the box for "Hard Drives" under devices.

When I bootup the icon for Elements shows up in orange. It changes to green only when I've gone to Finder and clicked on Elelments under the Devices list. This is a recent development. The icon used to be green upon bootup. Does anyone know why ?

When I bootup the icon for Elements shows up in orange. It changes to green only when I've gone to Finder and clicked on Elelments under the Devices list. This is a recent development. The icon used to be green upon bootup. Does anyone know why ?

I'm sorry to hear that.
I'm not affiliated w/ the developer, just a happy user that gave up fighting the apple podcast app a while ago. I used to have a bunch of smart playlists in itunes for my podcasts, and come home every day and pathologically synced my phone as soon as I walked in the door, and again before I walked out the door in the morning.
Since my wife was doing this too, we were fighting over who's turn it was to sync their phone.
Since I've switched to Downcast, I no longer worry about syncing my phone to itunes at all. I can go weeks between syncs.
Setup a "playlist" in downcast (ex., "Commute") and add podcasts to that playlist. Add another playlist ("walk" or "workout") and add different podcasts to that one.
Set podcast priorities on a per-feed basis (ex., high priority for some daily news feeds, medium priority for some favorite podcasts, lower priority for other stuff). Downcast will play the things in the priority you specify, and within that priority, it will play in date order (oldest to newest).
Allegedly, it will also sync your play status to other devices, although that is not a feature I currently use and can't vouch for. It uses apple's iCloud APIs, so to some extent may be limited by what Apple's APIs can do.

Deleted WLC from its folder under the Device work center of Cisco prime 1.2

Similar Messages

Maybe you are looking for