Deleteing shared components in soa-mds
Hi
It seems that I made a mistake when I created the jar file used in a bundle deployment descriptor, and now I have some XSD deployed in /apps/... of my resource palette, instead of /deployed-composites/<app>/xsd/...
How can I delete those XSD from the /apps/ directory?
Thanks
I supposed to make my previous question more concrete, the first answer I need before moving on to the rest of the bigger questions is this ...
What is Oracle’s recommendation for a services invocation framework between BPEL, JEE and ESB containers? From a quick read of Oracle Technet website, WSIF seem to be the preferred framework for this purpose. However, from an equally quick survey of such frameworks in use today outside of Oracle, WSIF does not seem to enjoy any widespread developer community support anymore and all talk in public forum seem to point to newer Apache Frameworks such as CXF which support emerging standards such as JAX-WS 2.0 What is the current stand of Oracle with respect to this matter?
Similar Messages
-
Resetting/Deleting Shared Profile Components
we have ACS4.1 and LMS2.6
LMS registered all apllications on ACS and was configured in ACS mode.
There was a test installation of Cisco Unified Operations Manager and it also registered all aplications on the same ACS server.
After this we have RME authorizations problem. User having all permissions in Shared Profile Components for RME can not access RME jobs.
So the quiestion is - Can I somehow delete or reset Shared Profile Components? I want to register LMS applications again, but can not see how I can delete Shared Profile Components. I can only delete any roles in it.This chapter addresses the CiscoSecure ACS for WindowsServer features found in the Shared Profile Components section of the HTML interface
http://www.cisco.com/en/US/products/sw/secursw/ps2086/products_user_guide_chapter09186a0080205a4a.html#wp737145 -
Delete development components from shared repository
We have some test models in the shared repository that need to be cleaned up. In visual composer, how can you delete development components from the shared repository?
Hi,
it is possible to delete a whole DC from DTR by commands:
http://help.sap.com/saphelp_nw70/helpdata/en/43/cf7e3f15e60a98e10000000a1553f6/frameset.htm
Deletion of single models falls out of official support.
Regards
Anja -
How to Clear Cache for an Old Static File in Shared Components
Hello,
I am using Apex 4.1.1.00.23, HTTP Server with mod_plsql, and Oracle Database 10.2.0.5.0.
My situation is as follow:
I have a CSS static file in the shared components that is used in different applications. I recently modified the CSS file, but the changes are not reflected in my applications.
I tried clearing the cache of my browsers, deleting the file from shared components and creating a new one with the same name, and nothing is working.
Using Firebug, I can see that the file used in my pages is the old version of it. Anyone can tell me if the server is caching the file and how can I clear it?
Thank you for your help,
ErickWhat kind of document is it (e.g. is this a parsed
HTML file, or a static file)? have you adjusted your
cache settings with the nsfc.conf file? have you
enabled the nsfc report? Are the files stored on NFS
volumes?
Regardless, you can force the cache to be flushed by
enabling the nsfc report, and then accessing the URI
like so:
/nsfc?restart
See the Performance and Tuning Guide:
http://docs.sun.com/source/817-1836-10/perftune.html#w
p17232I tried to to do this. Did n't worked. /nsfc?restart is not working for me. I have IPlanet 6.1 Webserver version. Without having any backend server running, I am getting JSPs displayed from cache!! Please help me out. -
Installation of CS3 web premium failed to install shared components
Hi all ,
why is this installation so terrible even after two years of this product release!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! , I think adobe does'nt care to hear customers problems????
here is my scenario :
user rights : user with admin privileges .
few weeks back i had some issue with the operating system due to some office suite installation hence i had to format my pc . After formatting i tried to install my software's back , when i tried to install CS3 web premium it showed the following error
shared components failed to install
adobe cs failed to install
when i tried to open any of the successfully installed programs it said license stopped working
i tried all possible steps mentioned in various blogs and forums , here is a list of steps i tried
uninstalled the suite .
Installed windows clean up utility.
Downloaded the CS3 clean up script ran the same in all levels including the hidden levels 3 , 4..
Downloaded and ran the flash uninstaller.
disabled all services in the msconfig tab.
disabled all start up programs in the msconfig tab.
restarted the machine .
installed the suite again .
BINGGGGGGG same error shared components failed to install *********** .
*I also tried some postings regarding starting flexnet services in the services utility
What is the issue i have been struggling with this for past one week and its driving me mad....any help would be greatly appreciated .
~ SamIn case anyone is still interested in this thread. I called Adobe tech support and they were able to help me finally get CS3 installed. The steps I took were kind of messed up because I'd try something and it still wouldn't work and then I'd try something else. But I think the following was the magic combination that finally worked. I don't know if this would help anyone else but it worked for me...
I uninstalled all the previously installed CS3 components. In fact, I uninstalled everything that started with the word "Adobe" on my computer, even Flash Player, just for good measure.
Then I ran the Adobe cleanup script at level 2
I downloaded the script from here...
http://www.adobe.com/support/contact/cs3clean.html
I went into the "computer" window and set it up to show hidden folders. Click Organize->Folder and Search Options->View. Then click "Show Hidden Files and Folders"
Then I went into C:\ProgramFiles\CommonFiles\Adobe and moved all the files in there to a folder on my desktop so there was nothing left in the Adobe folder (I don't think it wouldn't let me move some of the Acrobat files so the tech support guy said to just leave them)
I did the same thing for C:\ProgramFiles\Adobe and moved all those files to a folder on my desktop
Then I deleted all the files from C:\Users\MyUserName\AppData\Roadming\Adobe
I think I ran the cleanup script one more time just for the heck of it.
Next I went to the start menu and on the "Start Search" line I typed "msconfig." When the system configuration window came up, I went to the "services" tab and checked "Hide All Microsoft Services" Then I checked "Disable All" So that disabled everything that wasn't a MicroSoft service. Then I went to the "Startup" tab and checked "Disable All" and restarted the computer.
Then I went ahead and installed everything fresh off the CS3 DVD and it worked the first time. No more 1310 errors with the Config.Msi directory.
Hope this helps someone else.
Good luck!
Jenn -
Referencing CSS from Shared Components/Cascading Style Sheets
Apex 4.0
I've been placing my CSS style sheet in Shared Components/Cascading Style Sheets. And referencing it as follows <link type="text/css" rel="stylesheet" media="screen" href="#WORKSPACE_IMAGES#app300.css">.
For weeks all has seemed to work fine. I make changes to app300.css in Cascading Style Sheets. Clear cache. And see my change.
But suddenly it stopped working. More specifically my updates don't take. I firebug and look at the file under CSS and don't see my changes. app300.css is unchanged. Then I deleted app300.css from Shared Components/Cascading Style Sheets. The file is deleted. No longer in the Cascading Style Sheets panel. But the old file still appears when I look under firebug.
Simply a brain cramp for me. I know this is probably obvious but I can't figure it out.Hi,
If your file still recides in the database, you might want to try deleting it with a procedure from the wwv_flow_api package:
set serveroutput on
declare
l_security_group_id number;
begin
select workspace_id into l_security_group_id
from APEX_040000.APEX_WORKSPACES;
wwv_flow_api.set_security_group_id
(p_security_group_id => l_security_group_id);
wwv_flow_api.create_or_remove_file
( p_name => 'app300.css'
, p_location => 'WORKSPACE'
, p_mode => 'REMOVE'
, p_type => 'CSS'
commit;
end;
You can run this using SQL developer/ Toad or whatever program you use, but I don't think you can run in the SQL workshop of Apex.
Run it as workspace owner.
First part sets the apex engine to point to the correct workspace id in Apex, change "APEX040000" to match your version of Apex.
Second part is the procedure that should remove your file from the database.
Make sure you commit your changes and try to upload your css file again.
Regards,
Vincent
http://vincentdeelen.blogspot.com -
Hi,
I am trying to deploy some xsds to the SOA MDS ..
I am following the SOA developer's guide (http://download.oracle.com/docs/cd/E12839_01/integration.1111/e10224/toc.htm - 43.4 Deploying and Using Shared Metadata Across SOA Composite Applications) but while deploying I get the error :
[04:30:27 PM] ---- Deployment started. ----
[04:30:27 PM] Target platform is (Weblogic 10.3).
[04:30:27 PM] Entering Target Selection Dialog
[04:30:29 PM] Retrieving existing application information
[04:30:30 PM] Running dependency analysis...
[04:30:30 PM] Building...
[04:30:31 PM] Deploying 2 profiles...
[04:30:31 PM] Wrote Archive Module to C:\JDeveloper\TestsWorkspace\Tests\bin\deploy\metadata_shared.jar
[04:30:33 PM] #### Deployment incomplete. ####
[04:30:33 PM] == ERROR: No j2ee modules detected in EAR archive. Deployment aborted. == (oracle.jdeveloper.deploy.VetoableDeployException)
Does someone have an idea ?
Thanks,
romain.Hi,
Thank you for your answer.
Yes, I followed the documentation in which it is said to deploy the application ....
I found the problem :
I was trying to deploy a SOA Bundle containing only the metadata jar => I got the error.
I tried to deploy a SOA Bundle containing 2 jars : one for metadata and another for a BPEL Project, it worked.
I can't deploy the metadata only ...
Romain. -
Restrict Deletion of Components from Service Order
Hello All,
I noticed that I am able to delete the components from the Components tab of a Service Order even after I have completely issued the components.
Is there a possible way to prevent deletion of components that have already been issued..?
I think I can use the Business Transaction RMKL in the system status GMPS. But I guess this will prevent deletion of those components which have not been issued to the service order.
What would be the best way to prevent deletion of components that have already been issued...?
Thanks
JensiboHello All,
I don't know if you all received the last reply I posted against this thread... coz I am not able to find it in the thread. I had asked for your comments on any repercussions that may occur because of this config.
Anyway, the thing is, I followed Narashiman's suggestion and although I did not use the exact config he pointed me to, I used the config in the following nodes:
1.) Production --> Shop Floor Control --> System Modifications --> Define System Message Attributes
2.) Production Planning & Process Industries --> Process Order --> System Modifications --> Define System Message Attributes
and added an entry: Application Area = CN, Message No. = 750-Component & item & was already withdrawn and Category = E.
Having done this, the system did display the "Component & item & was already withdrawn" message when I tried to delete a component that was issued to a service order, but it did not delete the component from the service order. I was able to save the service order with the issued component still in the components tab.
Narashiman,
to specifically respond to your latest reply, I did find the node you pointed me to. But the trouble was that it did not have an entry for CN750 in it. When I tried to add an entry, the system did not let me do so and displayed the error message "Please specify a legal value".
So I went around opening each system message control node and finally found the two that I mentioned earlier that did work for me.
Thanks
Jensi -
Issue with Shared Components - Report Layouts Download
After my isp provider upgraded from APEX 3.2.1 to 4.0, I am now unable to go into the Shared Components -> Report Layouts section and access an existing report to download my rtf template. Is there another way to go and get this out of the database. I need to update a report layout that is old and I do not have a backup of the original report and do not want to spend the time to recreate.
Thanks,
MarkIf you have TOAD, or if you can install it, by connecting to your database you will be able to access your report layout via the Schema Browser. The whole path should be "All Schemas -> APEX_040000 -> Tables -> WWV_FLOW_REPORT_LAYOUTS". In that table you will find you report layout. Double click on it and copy/paste it into a text editor.
Note: You might need to be granted some rights to access the 400+ tables of the APEX_040000 schema. Or if you have a DBA, ask him to do this for you.
Of course, if you don't want to install TOAD, I bet you could query that table from the SQL Commands of the SQL Workshop, but you would again need the rights to access said table.
Best regards,
Mathieu -
Images uploaded in Shared Components not displaying
We recently installed version 4.2.1 on a new dedicated server. The entire setup went through without error.
The default images found in apex (/i/apex/builder/ etc.) are all visible. But when we upload any image through Shared Components > Images do not show on screen. An entry is available in the report on the Images page but the image itself is blank. The URL of the image is shown as : "+http://hostname:port/apex/wwv_flow_file_mgr.get_file?p_security_group_id=100000&p_flow_id=100&p_fname=Sampleimage.jpg+". The image is available in the wwv_flow_file_objects$ table and can be viewed through the BLOB_CONTENT column. But it is not visible in the front end.
Is there a solution to this issue?
Thanks,
AniketAniketP wrote:
We recently installed version 4.2.1 on a new dedicated server. The entire setup went through without error.
The default images found in apex (/i/apex/builder/ etc.) are all visible. But when we upload any image through Shared Components > Images do not show on screen. An entry is available in the report on the Images page but the image itself is blank. The URL of the image is shown as : "+http://hostname:port/apex/wwv_flow_file_mgr.get_file?p_security_group_id=100000&p_flow_id=100&p_fname=Sampleimage.jpg+". The image is available in the wwv_flow_file_objects$ table and can be viewed through the BLOB_CONTENT column. But it is not visible in the front end.Is the image associated with an application (No Application Associated)? If not then consider using the #APP_IMAGES# substitution istring nstead of #WORKSPACE_IMAGES# -
Problem facing while creating a SOA-MDS Connection in JDEVELOPER
Hi,
I am trying to create a new SOA-MDS connection by choosing the RESOURCE PALETTE > NEW-CONNECTION > SOA-MDS.. When I am selecting connection it's not populating the Select MDS Partition dropdown. Its giving the error :Oct 18, 2012 7:17:48 PM oracle.tip.tools.ide.common.resourcepalette.adapter.mds.DBConnectionInfo
WARNING: Error reading db partitions for connection name MDS_CONN. Reason :
Oct 18, 2012 7:17:48 PM oracle.tip.tools.ide.common.resourcepalette.adapter.mds.DBConnectionInfo
Any Suggestions Regarding This issue....
Thanks in Advance..
Edited by: 947267 on Oct 19, 2012 4:11 AMI uninstall my Jdeveloper and created new MDS connection now its working..
-
Getting error while creating SOA-MDS connection
Hi,
I am getting below error when trying to create SOA-MDS connection using jdeveloper in OIM 11g.
Performing action Refresh[ from oracle.jdevimpl.rescat2.dockable.RepositoriesView ]
Uncaught exception
java.lang.NoSuchMethodError: oracle.adf.rc.core.CatalogReference.<init>(Loracle/adf/rc/core/CatalogReference;Ljava/lang/String;)V
o.tip.tools.ide.common.resourcepalette.adapter.mds.MDSPackageContext.loadCache(MDSPackageContext.java:133)
o.adf.rc.spi.jndi.InMemoryContext.checkCacheLoaded(InMemoryContext.java:1341)
o.adf.rc.spi.jndi.InMemoryContext.localList(InMemoryContext.java:1086)
o.adf.rc.spi.jndi.InMemoryContext.listBindings(InMemoryContext.java:420)
o.adf.rc.spi.jndi.AbstractCatalogContext.listBindings(AbstractCatalogContext.java:291)
o.j.rescat2.nodes.RepositoryRootNode.loadCache(RepositoryRootNode.java:143)
o.j.rescat2.nodes.ExtendedGenericNode$1.run(ExtendedGenericNode.java:296)
j.lang.Thread.run(Thread.java:662)
Please help me in knowing the issue and how to resolve the same.
Thanks in advanceHi, please verify whether JDeveloper11115\Oracle\Middleware\oracle_common\modules\oracle.jps_11.1.1\jps-manifest.jar and JDeveloper11115\Oracle\Middleware\oracle_common\modules\oracle.adf.model_11.1.1\rcsrt.jar are available in the class path... Also verify oimclient.jar too.
The oracle.adf.rc.core.CatalogReference class is present in rcsrt.jar. -
Restrict Users for Deletion of Components in MFBF
Dear All,
How to restrict users from deleting components in post with correction screen in MFBF in REM?
Regards,
TejasDear Tejas,
Check this link
[Deleting components in MFBF|Deleting BOM components, while backflushing in REM]
Apart from this you can go for a screen variant,as per to my knowledge i dont think you can restrict
through an user exit.
Regards
Mangalraj.S -
Direct Link to Report layout in Shared Components
Is it possible to put a link on my page that goes directly into the Shared-Components- Report Layouts? I do'nt want my developer users to have to open up the builder to create/upload new (.rtf) Report Layouts.
Yeah
It's
http://host:port/pls/apex/f?p=4000:1400:&APP_SESSION.With the normal substitutions for your setup and removing pls if your using EPG.
Cheers
Ben
http://www.munkyben.wordpress.com
Don't forget to mark replies helpful or correct ;) -
Non-application specific static files not visible in shared components
Hello,
We recently upgraded to APEX 4.0.2.00.07. In the past we have uploaded a number of static files with no specific application linked to them.
Now, when I search on these files using Shared Components -> Static Files, I don't find them back.
But, if I directly query the view APEX_WORKSPACE_FILES (using the APEX schema owner), I see all the files. They have APPLICATION_ID = 0 and APPLICATION_NAME is empty.
Is this a bug? I couldn't reproduce this with newly added static files, whether I specify an application or not.
Matthias
Edited by: mhoys on Mar 1, 2011 11:40 AMOwen:
Excellent idea/perspective...I did not think of that. Each of our forms/screens has a seperate class file. Each class file has a CreateForm() routine that is called when an instance of the class is intiated behind the menu selection.
Here is a block of code In Main.vb I use to execute a menu selection:
Case "MPA"
'8/30/07 EJD - Work Order Parameters Screen
If GetFormCount(G_MPAMaint_Form_Type).ToString = "0" Then
Dim MPAForm As New MPA
BubbleEvent = False
Else
UpdateStatus("Another MPA maintenance screen is already open", SAPbouiCOM.BoStatusBarMessageType.smt_Error)
BubbleEvent = False
End If
So, I can utilize this code in the case statement where I was doing the ActivateMenu if I hear you right. Now, can you help me with how I would pass the
variables instead of making them Public Shared in the Main class? Or is it ok to expose them that way?
I Appreciate the help,
Ed
Maybe you are looking for
-
Trouble rebooting, PRAM didn't work nor fire wire
I have tried rebooting using the PRAM method and connecting a fire wire from my laptop to my desktop with no luck. when I push the button in back, I get the Apple logo and the gear keeps spinning. anything else I can do? thx deb
-
I cannot sync new 5c can you help
Is this because of something I need to do with my old one
-
Mail app on imac is not working
mail app will not load the page completly and i get the pizza wheel of death andmail does not load.
-
Although it is easy to move reminders to different rows using my iphone or ipad, I cannot seem to do it with my PC. I can select the row to be moved, and drag it to another position, but cannot drop it in a new position.
-
WHY GRAB DOES NOT CAPTURE DOCUMENT WARNINGS?
Hi, I'm trying to convert some docs from "Word" to "Pages", when the document warnings pop up informing about missing fonts etc etc, Grab cannot capture a selection, some times there's a lot of info, and I don't want to type it all, keeping screen