Deleting 3rd Party Loops... where the freak are they stored???

Yes, I know that by default, loops are stored in Library/Application Support/Garageband/Apple Loops, or the similar address under my user library.
And, I know there is another folder close by, for Jam Packs.
However, I have been going INSANE, trying to find old, single-hit files and obsolete loops which i have downloaded from 3rd party sources. They are NOT in the regular places such as the Apple loops folder.
All of them were installed by drag and drop method into the Garageband loop browser, so one would assume they all went to the same place.
How in the world do i find these loops?
The Finder and Spotlight have turned up nothing.
I have about 5,000 i'd like to trash to make room for more important things.
Can Garageband be THIS cumbersome?

HangTime wrote:
yes, that was telling him to not delete it by hand because, as Christoph points out above, you then need to reindex, whereas deleting it through GB takes care of that.
with 5,000, it's probably worth the reindex, deleting one at a time through GB would be ... tiring.
Actually. i like your idea of deleting from the browser. They are scattered in different categories and different folders. I'd have to search and test them anyway... so I might as well just axe them when i come upon them in the browser.
I swear I've tried it that way before, to no avail..
Thanks a lot for you help.

Similar Messages

How to delete unreleased transport request where the objects are locked

Hi Experts,
I was created a transport request, but I am facing some probelms with taht request, now I want to delete transport request. I tried to delete them in SE10, I am getting message that the objects are locked. Please tell me how to delete unreleased transport requests where the objects belong to this transport request are locked.

Hi,
First go to transaction se03 Choose "Unlock Objects (Expert Tool)" option under "Requests/Tasks" and unlock your task,
Than go to se10 and delete what you want.
I hope it helps.
Bulent

Create new mailboxes but where the heck are they?

I am so frustrated I want to switch back to Windows. I am using the new mail feature of Lion and everytime I create a new mailbox, it tells me it's going to create the mailbox in "on my mac" location. But where the heck is this location? Why can't the folder or the mailbox just be created in the right pane of mail. Why do have bury my mailbox I created in some multilayer almagom simply because they don't want me to work in the way I am use to. Stop being so Big Brother Apple, this really really is awful.

OK I solved this myself as I found that it was hidden in the new mail and I just had to switch it show

Adding 3rd party loops to the GB library (OSX)

Hope anyone can throw some light on this.
On the previous version of GB, I used to unpack the loops, select them as a group and drag to the Loops library in GB. This added them to the library catalogue with no problems so they could be selected, listened to and dragged into my tracks.
I've upgraded to the latest version, however when carrying out the same process, only some are added and others will simply not appear in the library.
Looking at the files, both are AIFF-C audio, both the same sample rate, both the same bits per sample and both the same duration. It's completely baffling me. Of the 509 loops I'm trying to add in this example, only 240 appear in the loop library. All will play in iTunes, so it doesnt appear to be file corruption at all.

Hi Scott,
I am not a developper and get access im May 2005 to this link: ftp://ftp.apple.com/developer/DevelopmentKits/Apple_Loops_SDK1.1.dmg
If the link doesn´t work, please try Mac OS X, then Developer. Under Related Topics click on Music & Audio. And finally on Music and Audio Downloads. The last click on Apple Loops SDK 1.1 SDK et voilà.
I hope this time will work
Bye

HT1430 guys, I need help, im trying to the the new software IOS 7.0 and it requires 3.7 GB free space. im using the IPhone4 and it had 6.4 GB capacity. i've deleted so much and it still says I only have 1.4 GB, I dont understand where the 5GB are being us

guys, I need help, im trying to the the new software IOS 7.0 and it requires 3.7 GB free space. im using the IPhone4 and it has 6.4 GB capacity. i've deleted so much and it still says I only have 1.4 GB, I dont understand where the 5GB are being used.
has any one experienced that? I cancelled my icloud account coz i tot the 5GB where there. im so confused. please help.
Dee

First thing to try is to reset your device. Press and hold the Home and Sleep buttons simultaneously ignoring the red slider should one appear until the Apple logo appears. Let go of the buttons and let the device restart. See if that fixes your problem.

Why do my 3rd party loops not appear in the "Loop" tab?

I have saved some Magix wav loops into the local apple users directory of Logic Express and though I can find them using the media browser they do not appear in the loops tab listing.
Does anybody know the cure for this?

If you drag your .wav loops into the arrange area do they function properly? If not, you may need to convert them using Apple Loops Utility. After doing that you can drag the folder with the .aiff conversions onto your loops tab to import them.
You might find this old thread useful:
http://www.logicprohelp.com/forum/viewtopic.php?f=1&t=37200

Hi all.When pressed play and make some changes in loop (eg fade in fade out) are very slow to implement, and also the loops from the library are very slow to play, corrects the somewhat self so is the Logic??

hi all.When pressed play and make some changes in loop (eg fade in fade out) are very slow to implement, and also the loops from the library are very slow to play, corrects the somewhat self so is the Logic??

Hey there Logic Pro21,
It sounds like you are seeing some odd performance issues with Logic Pro X. I recommend these troubleshooting steps specifically from the following article to help troubleshoot what is happening:
Logic Pro X: Troubleshooting basics
http://support.apple.com/kb/HT5859
Verify that your computer meets the system requirements for Logic Pro X
See Logic Pro X Technical Specifications.
Test using the computer's built-in audio hardware
If you use external audio hardware, try setting Logic Pro X to use the built-in audio hardware on your computer. Choose Logic Pro X > Preferences > Audio from the main menu and click the Devices tab. Choose the built in audio hardware from the Input Device and Output Device pop-up menus. If the issue is resolved using built-in audio, refer to the manufacturer of your audio interface.
Start Logic with a different project template
Sometimes project files can become damaged, causing unexpected behavior in Logic. If you use a template, damage to the template can cause unexpected results with any project subsequently created from it. To create a completely fresh project choose File > New from Template and select Empty Project in the template selector window. Test to see if the issue is resolved in the new project.
Sometimes, issues with the data in a project can be repaired. Open an affected project and open the Project Information window with the Project Information key command. Click Reorganize Memory to attempt to repair the project. When you reorganize memory, the current project is checked for any signs of damage, structural problems, and unused blocks. If any unused blocks are found, you will be able to remove these, and repair the project. Project memory is also reorganized automatically after saving or opening a project.
Delete the user preferences
You can resolve many issues by restoring Logic Pro X back to its original settings. This will not impact your media files. To reset your Logic Pro X user preference settings to their original state, do the following:
In the Finder, choose Go to Folder from the Go menu.
Type ~/Library/Preferences in the "Go to the folder" field.
Press the Go button.
Remove the com.apple.logic10.plist file from the Preferences folder. Note that if you have programmed any custom key commands, this will reset them to the defaults. You may wish to export your custom key command as a preset before performing this step. See the Logic Pro X User Manual for details on how to do this. If you are having trouble with a control surface in Logic Pro X, then you may also wish to delete the com.apple.logic.pro.cs file from the preferences folder.
If you have upgraded from an earlier version of Logic Pro, you should also remove~/Library/Preferences/Logic/com.apple.logic.pro.
Restart the computer.
Isolate an issue by using another user account
For more information see Isolating an issue by using another user account.
Reinstall Logic Pro X
Another approach you might consider is reinstalling Logic Pro X. To do this effectively, you need to remove the application, then reinstall Logic Pro X. You don't have to remove everything that was installed with Logic Pro X. Follow the steps below to completely reinstall a fresh copy of Logic Pro X.
In the Finder, choose Applications from the Go menu.
Locate the Logic Pro X application and drag it to the trash.
Open the Mac App Store
Click the Purchases button in the Mac App Store toolbar.
Sign in to the Mac App Store using the Apple ID you first used to purchase Logic Pro X.
Look for Logic Pro X in the list of purchased applications in the App Store. If you don't see Logic Pro X in the list, make sure it's not hidden. See Mac App Store: Hiding and unhiding purchases for more information.
Click Install to download and install Logic Pro X.
Thank you for using Apple Support Communities.
Cheers,
Sterling

I have two albums (RCA Sweeny Todd 2 discs set and RCA Into the Woods 1 disc) where the songs are listed as being on the same album on the list view, but do not group together on the iPod, so the songs can't play consecutively, or in the proper order.

I have two albums (RCA Sweeny Todd 2 discs set and RCA Into the Woods 1 disc) where the songs are listed as being on the same album on the list view, but do not group together on the iPod, so the songs can't play consecutively, or in the proper order. The "Apply Sort Field" and "Same album does not work, but ti is only these two RCA albums that do this. All other albums remain intact. Need help with this minor problem. Thanks.

UPDATE: This behavior (to an extent) still happens when "Repeat Album" is off. Instead of an infinite loop, it goes through all the tracks on the album (unsuccessfully) and kicks me out to the Album overview screen. Going back to list of Albums and tapping the Album again brings up "No Content: You can download music from the iTunes Store" but that screen immediately kicks me back to list of Albums.
So I am just even more confused now.

How do I create a separate Address Book? I'm not asking about a mailing list but an address book where the addresses are not mixed in with my regular address b

How do I create a separate Address Book? I'm not asking about a mailing list but an address book where the addresses are not mixed in with my regular address book. I already have three address books created for me by Thunderbird. I add all new addresses to one of those but am afraid to delete the other address books because some of their addresses are not repeated in my "main" address book. So if I don't delete all the names in one of the existing books, I need to create an empty book that will not mix the addresses with those in another address book. HOW DO I CREATE A NEW, EMPTY ADDRESS BOOK? I want to be able to create various mailing LISTS using the addresses in this new book so I will eventually have a special address book with a variety of mailing lists I can use as I wish.

In 24.4.0 there is no File|New|Address Book. There is File|New|Address Book Contact. How do I create a new address book ?

Pc is not recognising PDF file ( icon ) in emails and to open these it is loading a 3rd party program on the web. I have installed Adobe several times. To open my files I need to drag them to my Adobe program. any ideas??

Pc is not recognize PDF file ( icon ) in emails and to open these it is loading a 3rd party program on the web. I have installed Adobe several times. To open my files I need to drag them to my Adobe program. any ideas??

Hi aadeshs
This problem is on my laptop running Vista ( Business) on Adobe 10.0 , for many years I did NOT have a problem with this . No forum Pages on this.
Also i would like to know how screen readers can better interact with PDF as my wife has difficultys on some email attachments on her laptop , again there seems no easy avenue for someone in her situation surfing websites and forums for Hours maybe ok ok for sighted people, but not if you are blind & use a screenreader. No Support Help from Adobe is available.
thanks
oliver654837

Photoshop Elements 11 deleting 3rd party fonts

Whenever we install Photoshop Elements 11 it removes 3rd party fonts from the programs. If you uninstall, they appear again! This doesn't happen with Photoshop 9.
This clearly is a Photoshop problem and not a 3rd party problem.
Does anyone know of a fix or work around for this?

I'm confused by what you mean by 'third party fonts' and 'removes from programs'.
Times New Roman, Verdana, Webdings are all standard fonts provided with Windows. So are you saying that Windows fonts are disappearing, but only from after the letter 'S' ?
'Removes from programs' - do you mean that the fonts (from after 'S') no longer appear in other applications e.g. WordPad (the standard word processor provided with Windows)? Check it by starting WordPad and scrolling to the bottom of the fonts drop-down box.
With PSE11 installed, press the Windows key (or click Start) and type 'fonts'. Click the entry 'Fonts' that will show up in the search. Are the fonts after the letter 'S' present?
Cheers,
Neale
Insanity is hereditary, you get it from your children
If this post or another user's post resolves the original issue, please mark the posts as correct and/or helpful accordingly. This helps other users with similar trouble get answers to their questions quicker. Thanks.

My newly bought ipad4 is unable to delete 3rd party apps

I have purchased a new ipad retina on 16.01.2013 from kernal harayana and my ipad retina is not deleting 3rd party i.e later installed apps. On searching the net it seems that restriction settings under general settings is on but my ipad doesnot have restriction settings. Is it because when i closely watched the model no. on box it says DEMO.The seller from Kernal,Infotech computers has cheated while selling. Kindly help me to solve this problem.

It's a demo model, nothing anyone here can do. Take it up with kernal harayana.
You can try settings > general > reset > erase all content and settings but no guaranteee that will work.

I recently migrated my MacBook from 10.5.8 to 10.6.8, using the Snow Leopard CD I purchased from Apple. Since then I have noticed a strange ozone smell coming from the MacBook in the area where the hinges are to open and close the unit. I was told by Appl

I recently migrated my MacBook from 10.5.8 to 10.6.8, using the Snow Leopard CD I purchased from Apple. Since then I have noticed a strange ozone smell coming from the MacBook in the area where the hinges are to open and close the unit. I was told by Apple that it probably is not serious and is coming from the fans in the MacBook. It is true that the smell/odor is more intense when the fans are working. Apple said I should take the MacBook to an Apple Store to have the hardware checked out. Everything seems to be working correctly. I am backing up automatically wirelessly to a Time Capsule, which I had not done until recently, although I had purchased the Time Capsule in 2009. I have not noticed this odor before. Does anyone suspect something more serious that may be going on?

You may be smelling it because with the new OS the processor is having to work harder causing it to get hotter then it would with the other OS. I can't say there is nothing wrong, but what could be happening is just that, it's getting hotter so the fan is spinning faster and moving more air so you are getting more of the smell then you would before. I would still continue to back it up, and take it to the Apple Store at a Genius Bar and have them look at it to make sure. Was the computer ever in a smoky environment??

How to find where the segments are get filled.

Hi friends,
I want to know, where the segments are getting filled for an IDoc. Actually i have failed IDoc's, in that IDoc the segment E1EDS01 the Qualifier is 009 its having 2 fields one is SUMMID its having value of 009 and another one is SUMME its having the value of 4.124.
The requirement is this SUMME value is wrong for selected Idocs. How i debug this? I know the partner profile name, basic type and message type. How i will get the proper include name?
Its an outbound interface.
Pls anyone advice are help.
Mohana

Hi Mohana,
If you have partner profile, then goto transaction WE20 and search for your message type in Outbound paramters of that partner and double click on it. Then click on the "_Message Control_" tab.
Process code will be defined there it will direct you to Outbound processing Function module. Then you can find your segment inside include of that Function module. (It could be user-exit also)
If you cannot find process code there, then look for corresponding EDI Output type which triggers the outbound Idoc and get the program name through transaction NACE.
Hope this will help you
Regards
Saravanan

Apple says Reminders works with Outlook, but I can't find where the lists are displayed in Office or Outlook once they are synced.

Apple says Reminders works with Outlook, but I can't find where the lists are displayed in Office or Outlook once they are synced. Any suggestions?

I'll guess you've already discovered the answer to this, but just in case:
Reminders works with Outlook tasks by syncing with iCloud, or through Exchange. You can't sync iOS Reminders with Outlook Tasks via USB/iTunes (like you can do with Notes, Calendar, Contacts).
So the marketing material on Reminders is a little misleading in that it's not specific enough -- there is no syncing without one of those intermediary systems mentioned above.
On a side note, syncing Tasks/Reminders via iCloud is not very good in my opinion:
Requires that you sync to the cloud, even if you have no other use for storing personal data in the cloud.
Requires that the iCloud Control Panel be installed on your PC (not sure about Mac).
After syncing, you'll find new Calendar and Task groups called "iCloud" have been created in Outlook. The calendar groups appear to be created even if you're only syncing Tasks/Remminders (not sure why).
Reminders are stored in the new group (noted above) called "iCloud" rather than in your default Tasks group. This seems to me to be a sort of "parallel" sync, rather than a true sync with Outlook. There are oter implications of your synced tasks being in the new group that I won't go into here, but you can search the interwebs to learn more.
In my own case, I tried iCloud syncing, decided that I didn't like it for the reasons stated above, and then uninstalled (Control Panel and new Outlook groups) with no apparent ill effects.
Though I don't guarantee you'll have the same results, it might be worth a try to see if it suits your purposes.

Deleting 3rd Party Loops... where the freak are they stored???

Similar Messages

Maybe you are looking for