Deleting a Configuration Scenario in Dev
Hello,
When we decide to rearchitect interfaces in PI, and are faced with deleting configuration scenarios in Development, how do those deletes "transport" up into QA and Production when there is nothing to "export" in the source system (because it was deleted?
It is not a best practice to directly change QA or Prod, so we are assuming that carrying deletes through the PI landscape must have a transport mechanism.
Thank you.
Hi,
If you are using File transfer mode for exporting Configuration objects, then you have a option Include Deleted Objects which you can tick and then your deleted objects will be deleted in PI QA or PRD system when you import this file in these systems.............
If you are using CTS+ for exporting objects, then when you delete your configuration scenario in ID and activate it, then you can right-click your change list having the deleted object and release it for transfer...... then a transport request will be created for it which you can import in QA or PRD system and then your configuration scenario will be deleted in your these systems.
Regards,
Rajeev Gupta
Similar Messages
-
Error while importing Configuration Scenario
Hi guys
When I try to import a Configuration Scenario from DEV to QAS, I get the following error.
CC_xxxxxx is already locked in change list Standard Change List by user xyz Activate or reject the change to object Communication Channel: * | ERQ_BS | CC_xxxxxx and restart the import
I went to the Lock Overview from Administration, of both DEV and QAS and I don't see any objects locked under that particular user. Why do I get this error ?
I removed that particular CC from the Configuration Scenario and imported again. I still get the same error and this time, it pointed out to another CC in my Configuration Scenario.
RegardsThanks Shabarish,
It worked and thanks to everyone who helped me.
I went to the " Change List" tab in QAS, I got this error in QAS, and assigned all the open items in the above user id to my userid and opted Reject changes. Then I imported again and it worked.
Regards -
Deletion of unsed scenarios in PI landscape
Dear Experts,
We need some guidance on deletion of unsed scenarios in PI.
We are using PI7.1, having 100+ scenarios in PI landscape (DEV,QAS,PROD).
We found few of them are no longer needed and we want to delete those from all the landscape of PI.
Is there any standard procedure to do this? whether we have to delete in each machine manually or the transport will work?
Please guide.
thanks and regards,
Ravi SiddamRavi,
*It dose not ask for change list and then we do not have anything to transport.*
>>>>>>>>>>>>> You have go to Changelist Tab there you can see them
Whenever you make changes in the IR or ID and save it, you can see them in change list. Say suppose you delete a scenario, it does appear in the change list under the username (username used to delete).
Hence when you right click on the object and delete it and you should be able to see them in change list and after activating it in the change list then the scenario is completely removed.
This blog might help you: [How to : Delete Software Component from Integration Builder|How to : Delete Software Component from Integration Builder]
Regards
Ramesh -
Import ID Configuration Scenarios and keep the same Business System names
Hi Guys,
Is it possible to transport ID Configuration Scenarios Objects between 2 XI systems and keep the same names for both sender and receiver Business Systems ? That is, to skip the SLD lookup for transport Source and Transport Targets systems ?
I tried to create the same Business Systems under the same name twice, but this was not possible. Any ideas ?
The reason is that I want to transport all the objects from one XI DEV server to another XI DEV server.
Thank you,
Best Regards,
Evaggelos GkatziosHi,
We have done same but with bit of manual work (without Transport).
Create SLD object in target system with same name as in Souce XI system SLD.
IR & ID was exported using TPZ files from Source system & were imported in Target system.
It used same object names in both XI systems.
Regards
Sushil -
Assignment in Configuration Scenario Disabled
Hello,
I have difficulties in configuring the configuration scenario.
This Scenario previously runs normally, and so is other scenarios existed.
But this day this unwanted condition happen, suddenly, last action i did was add new component to the Bs. System and generate the objects.
When i open MODEL CONFIGURATOR, the assigned component are all missing.
moreover, the assign component status and configure connection are also mark red traffic light, means not assigned.
Meanwhile, in OBJECTS tab, the components, and related objects are completely listed.
I tried to re-assign one Business System ( and also automatically Receiver and Interface Determination related to it).
But when i click generate button, the START button is disabled. Seems that the PI not allowing me to generate the objects.
How this thing can happen?
If I delete the Business System, as long this problem still occurs, am afraid i couldn't re-assign the Business System again to Configuration Scenario.
Kindly need your advice.
Regards,
Tiara.Yes, i have full access to edit and create the objects.
I also do last update 2 days ago, but somehow, the Model Configurator turns wrong this day.
I can't find the causes since i check all are ok, and so the Enterprise Builder Namespace.
Do you know why?
Regards,
Tiara. -
How to delete a technical scenario
Hello,
how can I delete a technical scenario from managed system configuration?
There are only buttons for create new/configure/maintain/export ...
Thank you.
(Solman 7.1 SP1)
Edited by: Hauke Ihnen on Jan 24, 2012 12:55 PMJust had this problem myself today...
In Workcenter "Solution Manager Configuration", in the "Related Links" area, click "Technical Scenraio Wizard" -
I have to delete an existing scenario.
If I delete the software component from SLD, could I have any problems?
I am thinking in deleting it from there and then delete every object in IR and ID.
Is this the right way?Hi
I can delete anything in DEV and QA, but I cant do that in PROD.
Is this the right way? :
delete the Interface mapping, Message Mapping, Message Interface, Message Type and Data types in DEV, and then activate the changes.
Transport this changes to QA.
Transport from QA to PROD.
Then, enter the SWCV in edit mode and delete the namespace from it. Save and activate the SWCV.
Al last, delete the complete scenario in ID (in DEV). Then transport it to QA and finnaly transport it to PROD.
Am I wrong in any step?
All steps are correct. But you can delete namespace directly then all mappings and objects will be deleted under the namespace.
Activate the change list and transport to Q and then P
Thanks
Gaurav -
PI 7.11 Configuration Scenario Tables
Hi everbody,
regarding "Configuration Scenario", does anybody know in which database the information of the tree view in the Integration Directory is stored?
Thanks in advance
HartmutHi,
You can refer the foll link for java stack tables :
http://wiki.sdn.sap.com/wiki/display/XI/XI+Tables
Regards -
Downloaded Yosemite and since then cannot connect to internet or bluetooth mouse - was advised to delete system configuration file from the hard drive and since then cannot start up computer. Any help would be appreciated - cheers.
Boot the MBP with the OPTION+COMMAND+R keys down. The result should be a display showing a revolving globe. By following the instructions, you will be able to reinstall the original OSX. Then you may reinstall Yosemite.
A solid Internet connection will be required.
Ciao. -
Is it Possible to delete the configuration from a Material Variant?
Hi,
Can you delete the configuration from a Material Variant and then reconfigure the part in MM02?Hi
Once we created variant we can't delete it,
Regards,
srihari -
How to trace if objects are deleted from a scenario
Hi Experts,
Can you please tell me if some of my objects get deleted from my scenario how can I trace? like by which user this is done or any log is there from where we can find this one?
Thanks
Sugata BJust run the scenario if you are aware of the entire process by disabling target system adapter (if needed)
then you can easily trace it out.
If you know details about mapping go to SXI_CACHE and chk there, for objects of your scenario
Rajesh -
Getting Error in I.D while Importing a Configuration Scenario
Hi ,
I'm traying to import a Configuration scenario . after choosen the scenario from teh Imported Objects it was giving the Error message java.lang.NullPointerException .
Any specific reason is there for this or can any body suggest me the solution.
Regards
JainHi Swarup & Sandeep,
Previously i had imported a Configuration Scenario that was imported successfully .recently we deployed some .sda file for JDBC drivers for connecting legacy systems. and after that now I'm unable to Import any scenarios
Please suggest me .
Regards
Jain -
Configuration Scenario - Inbound Delivery
Configuration Scenario
How can this scenario be best configured on SAP?
This is how the client receives goods ordered:
A PO is created and sent to the relevant vendor. The vendor does not deliver the goods directly to the client; the goods are delivered to a Transporting Company (responsible for delivering the goods to different clientu2019s site).
The problem here is monitoring the movements of the ordered material, from the vendor, to the transporting company till to the clientu2019s site.
The client requires some sort of control mechanisms on the movement of the ordered material from the point of the vendor in terms of when the vendor has sent the material to the transport company , to the point where the Transporting company receives the goods , to the point where the goods are being received at the clients site .
Whats the best way to configure this on SAP .?? Could this problem be solve through the Inbound delivery process , if there is a way please provide full details
Your help will be kindly appreciatedHi,
Using confirmation control key you can control different types of confirmations. For your scenario I would propose the following:
- when Vendor issues the product, then initial confirmation (eg. standard 'AB') can be created
- when products are delivered to transportation company, then inbound delivery (which is also available as confirmation 'LA' type) is created
- naturally when goods arrive to final destination, goods receipt is posted, in this case against inbound delivery document
If you do not want to create inbound delivery, you can also create custom confirmation categories that can be entered against PO items directly.
Regards,
Dominik Modrzejewski -
Changing the Model Configurator in configuration scenario
Hi SapAll.
i have got a tricky situation where i didnt filled the communication channel parameter in the existing Model Configurator under Connections from Component Assignment(tab) of configuration scenario m,so i just want to know on how i can make the Model Configurator (configuration scenario) in edit mode so that i can assign the communication channel under Connections from Component Assignment(tab) in model configurator of Configuration scenario .
will be waiting for your response.
regards.
Varma.If you are using PI 7.1. Just open ur configuration scenario in edit mode. Go to 'ES Repository Model' tab and choose 'Model Configurator' for your configuration scenario. It ll open in edit mode.
-
Configuration Scenario Builder - Receiver Determination Problem.
Hi I am Follows configurates Integration Scenario to SRM-SUS scenario in XI
In Model Configuration. when I try create Object Bottom in Simulation Process . generate the report show the next message for
Component View Connection
Receiver Determination light yellow color SRD_009 | PurchaseOrderRequest_out
Analisys ; Requiered Communication Component | SRD_009
a receiver determination was found for connection
Reciever are missing in the receiver determination found
Results ; the reuse receiver determination is already assigned to the configuration scenario
the missing receivers were inserted into receiver determination found
added receiver communication component SRD_008
Notes; Check the conditions for all receivers of the receiver determination. the default result value for the generated condition
is TRUE:
thanks.Hi,
Please verify letter by letter if you haven't make a typo here:
Default Interface Namespace -- http://mtf
Default Interface Name -- mtf_mi1
please also make a test of your scenario in integration directory
please also do not use best efort quality of service
/wg
Message was edited by:
Wojciech Gasiorowski
Maybe you are looking for
-
When i open iphoto and the zoom is near the minimum, I can see all the photos, but when I move it towards the maximum range, the pictures disappear. If I click on them I only see a blank, black screen. Someone help???
-
Not able to view transport request tpz file for importing in Production
Hi Experts, I am using PI 7.0. I am facing a problem while transporting a request to Production environment. I am using File Level Transport. When I create a transport file, it is successfully created in development system's /export location. Basis t
-
Is there a way of locking a word document in mountain lion so it cant be printed or changed?
-
All of a sudden LR5.5 will not import from my Canon Cameras???
5d MKII, 60D or EOS M... Everything is up to date and it makes no sense to me? Sometimes it will download 2 pics, 5 pics or 7 pics and then freeze... Outcome is always the same. It states it cannot read files. Sometimes it says there are no files and
-
What is asant and how to run it
Im studying j2ee now. Stuck in how to use jdbc within j2ee. I read the tutorial chapter 3/ Defining a Data Source in the J2EE Server. There is a sentence saying "2. Run asant create-jdbc-connection-pool_common. This asant task runs an asadmin command