Deleting a dminesion through rules file.

Hi ,
We have a requirement to delete dimensions , before bulding metadata ( for a BSo cube) , so can some one assist me how to delete the dimensiont hroguh rule file.
Thanks in advacne

You can't delete a dimension through a rules file. Do you mean you want to delete all members before rebuilding the same dimension or actually remove the dimension altogether?
The only way to remove a dimension is to have a 'template' or 'stub' outline without the dimension and copy it over your real outline (probably after clearing all data). If what you really want is to rebuild the dimension containing only the members in your source, then the 'Remove Unspecified' dimension build setting can be used.

Similar Messages

Assigning property through rule files

Hi All,
a) Could anyone please explain me how can we assign properties of members through rule files while building the dimension. Suppose we want to assign the property store data or dynamic calc to any member then how we will do it through rule files.
b) What is the maxl command to refresh the database?
Thanks

John,
Thanx ur blog was very helpful. I am facing a problem while loading a dimension which has attributes e.g. Product is my dimension which has attributes like Caffeinated- boolean, ounces- numeric, pkg type- text and Intro date- date.
I get errors like-
1)Intro Date_04-01-1996: The attribute member name does not match the setting for the type of attribute. Date attribute members should be specified in xx-xx-yyyy format................... and.............
2) Ounces_12: The attribute member name does not match the setting for the type of attribute. Date attribute members should be specified in xx-xx-yyyy format.
Im new to Hyperion Essbase...any help wld be highly appreciated.

Loading data through rule files in Essbase

Hi everyone,
I really need help because something that I don't understand is happening when I am loading data through a rule files that I have created in Essbase. In the "Field Properties" of that rules files, I added few accounts in the "Global Properties" that I wanted to be replaced by others when I perform the load since I had troubles with the hierarchy of my accounts. My problem is that I have 3 accounts that I cannot add when I am loading my data and I don't understand why. By example, in my data extract file, I want to add the account : 601820SN60005 but since it doesn't exist in my Dimension Library I changed my rule file. I add the following propertie : Replace 601820SN60005 with 601820, so the system should put the data in that account instead. But it's not what'S happening. When I perform my load, the log tells me that the member 601820SN60005 does not exist in the database which is true but it seems that the propertie I had is not working. The load should work property. Is it possible that my rules files is corrupted? Or anything else?
Please give me a clue of what's happening here because I really don't understand!
Thanks a lot!

I will just pipe in with the mostly worthless comment that doing any kind of ETL within a load rule is really not the world's best idea. Could you do your transformations in the source? There is this fantastic language called "SQL" that allows all kinds of cool data manipulations. Oracle even sells this product called ODI that I hear is just dandy for ETL work. :)
A slightly more useful suggestion -- it's really tough to view all of the various transformations in a load rule, as you have found to your sorrow. Did you know you can print the load rule and get all of the transformations? I use it all the time when a client hasn't listened to my whine about not doing ETL in a load rule.
Regards,
Cameron Lackpour

Rule file design need to reject some members in the same field

Hi,
I'm working on Essbase vrsn11.1.1.3.I'm building dimensions through rules file. I have a .dim file with parent child reference that have 5 fields(parent-child-alias1-alias2-property).
The requirement is as such that the fourth field (alias2) is to be needed only for some members,Let say i have four members to load(A,B,C,D)Alias1 is required for all four members but alias2 is to be loaded only for B & D members.
Is there any possibility to full fill this requirement, if so then kindly let me know
thanks in advance
Edited by: hyperion on Jan 12, 2012 4:01 PM

create second rule file and load alias2 only with your select/reject criteria.
Essbase rule file will reject entire record if at least one column matches up reject condition.

Error in loading data into essbase while using Rule file through ODI

Hi Experts,
Refering my previous post Error while using Rule file in loading data into Essbase through ODI
I am facing problem while loading data into Essbase. I am able to load data into Essbase successfully. But when i used Rule file to add values to existing values I am getting error.
test is my Rule file.
com.hyperion.odi.essbase.ODIEssbaseException: com.hyperion.odi.essbase.ODIEssbaseException: Cannot put olap file object. Essbase Error(1053025): Object [test] already exists and is not locked by user [admin@Native Directory]
at org.apache.bsf.engines.jython.JythonEngine.exec(JythonEngine.java:146)
at com.sunopsis.dwg.codeinterpretor.SnpScriptingInterpretor.execInBSFEngine(SnpScriptingInterpretor.java:346)
at com.sunopsis.dwg.codeinterpretor.SnpScriptingInterpretor.exec(SnpScriptingInterpretor.java:170)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.scripting(SnpSessTaskSql.java:2458)
at oracle.odi.runtime.agent.execution.cmd.ScriptingExecutor.execute(ScriptingExecutor.java:48)
at oracle.odi.runtime.agent.execution.cmd.ScriptingExecutor.execute(ScriptingExecutor.java:1)
at oracle.odi.runtime.agent.execution.TaskExecutionHandler.handleTask(TaskExecutionHandler.java:50)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.processTask(SnpSessTaskSql.java:2906)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java:2609)
at com.sunopsis.dwg.dbobj.SnpSessStep.treatAttachedTasks(SnpSessStep.java:540)
at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java:453)
at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java:1740)
at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$2.doAction(StartSessRequestProcessor.java:338)
at oracle.odi.core.persistence.dwgobject.DwgObjectTemplate.execute(DwgObjectTemplate.java:214)
at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.doProcessStartSessTask(StartSessRequestProcessor.java:272)
at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.access$0(StartSessRequestProcessor.java:263)
at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$StartSessTask.doExecute(StartSessRequestProcessor.java:822)
at oracle.odi.runtime.agent.processor.task.AgentTask.execute(AgentTask.java:123)
at oracle.odi.runtime.agent.support.DefaultAgentTaskExecutor$2.run(DefaultAgentTaskExecutor.java:83)
at java.lang.Thread.run(Thread.java:662)
from com.hyperion.odi.common import ODIConstants
from com.hyperion.odi.connection import HypAppConnectionFactory
from java.lang import Class
from java.lang import Boolean
from java.sql import *
from java.util import HashMap
# Get the select statement on the staging area:
sql= """select C1_HSP_RATES "HSP_Rates",C2_ACCOUNT "Account",C3_PERIOD "Period",C4_YEAR "Year",C5_SCENARIO "Scenario",C6_VERSION "Version",C7_CURRENCY "Currency",C8_ENTITY "Entity",C9_VERTICAL "Vertical",C10_HORIZONTAL "Horizontal",C11_SALES_HIERARICHY "Sales Hierarchy",C12_DATA "Data" from PLANAPP."C$_0HexaApp_PLData" where (1=1) """
srcCx = odiRef.getJDBCConnection("SRC")
stmt = srcCx.createStatement()
srcFetchSize=30
#stmt.setFetchSize(srcFetchSize)
stmt.setFetchSize(1)
print "executing query"
rs = stmt.executeQuery(sql)
print "done executing query"
#load the data
print "loading data"
stats = pWriter.loadData(rs)
print "done loading data"
#close the database result set, connection
rs.close()
stmt.close()
Please help me on this...
Thanks & Regards,
Chinnu

Hi Priya,
Thanks for giving reply. I already checked that no lock are available for rule file. I don't know what's the problem. It is working fine without the Rule file, but throwing error only when using rule file.
Please help on this.
Thanks,
Chinnu

Forcing program to close, I am deleting a lot of files from my trash but it stopped working about 1/2 way through (1650 files left) so I tried to reboot but it won't let me because a the program is still running which I can't close.

Forcing program to close, I am deleting a lot of files from my trash but it stopped working about 1/2 way through (1650 files left) so I tried to reboot but it won't let me because a the program is still running which I can't close (stuck at 1650 files to go). So it allowed me to click cancel now it says "stopping" for 3hrs now. Is there anyway to force the MacBook Air (new model) to close as you can't remove the battery?

Press and hold the power button until the Mac turns itself off. This force-shutdown should be done only after you've exhausted other options (you seem to have done so).
Wait at least 60 seconds.
Then press the power button to start up the Mac. It will take a little longer to start up because it will perform additional self-tests on the first boot after a forced shutdown.
Once the bootup is complete, you should be able to delete the trash. Hold down the option key while choosing to empty the trash, which will automatically delete "locked" items.

Error while using Rule file in loading data into Essbase through ODI

Hi Experts,
I am facing problem while loading data into Essbase. I am able to load data into Essbase successfully. But when i used Rule fule to add values to existing values am getting error.
test is my Rule file.
com.hyperion.odi.essbase.ODIEssbaseException: com.hyperion.odi.essbase.ODIEssbaseException: Cannot put olap file object. Essbase Error(1053025): Object [test] already exists and is not locked by user [admin@Native Directory]
     at org.apache.bsf.engines.jython.JythonEngine.exec(JythonEngine.java:146)
     at com.sunopsis.dwg.codeinterpretor.SnpScriptingInterpretor.execInBSFEngine(SnpScriptingInterpretor.java:346)
     at com.sunopsis.dwg.codeinterpretor.SnpScriptingInterpretor.exec(SnpScriptingInterpretor.java:170)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.scripting(SnpSessTaskSql.java:2458)
     at oracle.odi.runtime.agent.execution.cmd.ScriptingExecutor.execute(ScriptingExecutor.java:48)
     at oracle.odi.runtime.agent.execution.cmd.ScriptingExecutor.execute(ScriptingExecutor.java:1)
     at oracle.odi.runtime.agent.execution.TaskExecutionHandler.handleTask(TaskExecutionHandler.java:50)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.processTask(SnpSessTaskSql.java:2906)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java:2609)
     at com.sunopsis.dwg.dbobj.SnpSessStep.treatAttachedTasks(SnpSessStep.java:540)
     at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java:453)
     at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java:1740)
     at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$2.doAction(StartSessRequestProcessor.java:338)
     at oracle.odi.core.persistence.dwgobject.DwgObjectTemplate.execute(DwgObjectTemplate.java:214)
     at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.doProcessStartSessTask(StartSessRequestProcessor.java:272)
     at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.access$0(StartSessRequestProcessor.java:263)
     at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$StartSessTask.doExecute(StartSessRequestProcessor.java:822)
     at oracle.odi.runtime.agent.processor.task.AgentTask.execute(AgentTask.java:123)
     at oracle.odi.runtime.agent.support.DefaultAgentTaskExecutor$2.run(DefaultAgentTaskExecutor.java:83)
     at java.lang.Thread.run(Thread.java:662)
from com.hyperion.odi.common import ODIConstants
from com.hyperion.odi.connection import HypAppConnectionFactory
from java.lang import Class
from java.lang import Boolean
from java.sql import *
from java.util import HashMap
# Get the select statement on the staging area:
sql= """select C1_HSP_RATES "HSP_Rates",C2_ACCOUNT "Account",C3_PERIOD "Period",C4_YEAR "Year",C5_SCENARIO "Scenario",C6_VERSION "Version",C7_CURRENCY "Currency",C8_ENTITY "Entity",C9_VERTICAL "Vertical",C10_HORIZONTAL "Horizontal",C11_SALES_HIERARICHY "Sales Hierarchy",C12_DATA "Data" from PLANAPP."C$_0HexaApp_PLData" where      (1=1) """
srcCx = odiRef.getJDBCConnection("SRC")
stmt = srcCx.createStatement()
srcFetchSize=30
#stmt.setFetchSize(srcFetchSize)
stmt.setFetchSize(1)
print "executing query"
rs = stmt.executeQuery(sql)
print "done executing query"
#load the data
print "loading data"
stats = pWriter.loadData(rs)
print "done loading data"
#close the database result set, connection
rs.close()
stmt.close()
Please help me on this...
Thanks & Regards,
Chinnu

Hi Priya,
Thanks for giving reply. I already checked that no lock are available for rule file. I don't know what's the problem. It is working fine without the Rule file, but throwing error only when using rule file.
Please help on this.
Thanks,
Chinnu

\\Error Reading Rules File when dimbuild with DLR

Hi
I am using Essbase 11.1.2.1.
I create a DLR via the web console EAS (11.1.2.1 too) : a very simple one : dimbuild DLR, ";" as separator, 2 fields (parent and child)
when i try do do a "Update Ouline..." with a very simple file (1 line : accounts;test) I have this error message "\\Error Reading Rules File"
I don't know if it can help but if I create the same DLR on another 7.1 essbase serveur through this same wec eas console (11.1.2.1), I have no problem...
another information, too : my 11.1.2.1 server has a //ESS_LOCALE English_UnitedStates.Latin1@Binary ESSLANG. My 7.1 server has a //ESS_LOCALE French_France.ISO-8859-15@Default ESSLANG. I really don't know if there is a link, or absolutely not.
Thanks in advance for your help!
Fanny

unable to load essmsh.exe : the error message seems to indicate that it is a problem with a path in the environment variables.
So if you say that the "Error Reading Rules File" is typically a path issue, all is probably linked!
The admin will probably correct that tomorrow : I let you know if it solves the problem!
Thanks!
Fanny

How to get an account with an IsICP -"R" attribute calculated in the HFM Rule file

Till recently everything was going fine with the calculations in our HFM setup ( Version 4.1)
We have say around 8 Expense accounts which roll up into a Parent account say ALL446 which finally rolls up into Operating Expenses.
Operating Expenses
|__ parent account
      |_INVALO
       |_ALL446
          |__222446
          |__242446
And we have a calculation in the rule file as below
HS.EXP "A#BE FIXED COST = A#Operating Expenses +A#SGA - A#BE VC OP F10"
This was calculating correctly till we did the below change
Added IsICP attribute to couple of accounts say 222446 and 242446 ( in the above example) in the metadata which finally rolls up into Operating Expense.
Note: we did not add any Plug account attribute to the accounts
Now the problem what we have in hand is -> Fixed Cost is not calculating correctly.- It happens that the two accounts for which we added the IsICP are not showing up in the calculation and the data in those two accounts are not adding up in Fixed Cost.
POV in GRID/Excel -> actual,2013,periodic,<Entity Currency>, ICP Top, AllCustom1, AllCustom2, AllCustom3, None( for custom4)
But when we retrieve Operating Expenses in Excel - it is showing the correct amount, even in the grid - but looks like when the rule tries to calculate Fixed Expenses using the above rule - these accounts are not adding up in the Operating expenses.
I tried the formula ( to check what number is coming into Fixed cost ) - the result is zero - But in the grid/excel I see amount for acct2. Same POV as above
HS.EXP "A#BE FIXED COST = A#222446"
and if I add & Tops to the account like below ( getting some weird number instead of what is there in acct2)
HS.EXP "A#BE FIXED COST = A#222446" & Tops
Questions:
1) Where exactly I am going wrong ?
2) Is it MANDATORY to have a Plugaccount attribute when we have IsICP turned to "R" ?
3) What will happen if we do not have a Plugaccount for the IsICP account ?
4) How to correct the formula to make sure I get the number in the acct2 into Fixed Cost??
5) Do we need to have the IsICP turned on to the immediate parent of the account having IsICP and the Top parents of the account too??
6) Is it possible to get the exact number what we have in 222446 into BE Fixed Cost account via Rule?- why I am not getting it
Notes:
BE Fixed Cost-> account type -"Expense", IsCalculated - yes, IsConsolidated - yes, IsICP- N, Custom1TopMember - AllFunctions, Custom3TopMember- AllCustom3, enabled allcustom1,2,3,4aggregations
Operating Expenses->"Expense", IsCalculated - No, IsConsolidated - yes, IsICP- N, Custom1TopMember - AllFunctions, Custom3TopMember- AllCustom3, enabled allcustom1,2,3,4aggregations
INVALO ->"Expense", IsCalculated - No, IsConsolidated - yes, IsICP- N, Custom1TopMember -none, Custom3TopMember- none,
enabled allcustom1,2,3,4aggregations
Problematic account 222446 -> "Expense", IsCalculated - No, IsConsolidated - yes, IsICP- R, Custom1TopMember - Operations, Custom3TopMember- AllCustom3, enabled allcustom1,2,3,4aggregations
The Entity on which I am trying to get the data( mentioning wherever I have attributes for this entity)
DefCurrency - DEM, Allowadjs- enabled, IsICP - enabled, Userdefined 2 - financial, - SecurityasPartner attribute - is not selected through out the applicaiton.
Variable
Tops = ".I#[ICP Top].C1#AllCustom1.C2#AllCustom2.C3#AllCustom3.C4#[None]"
tried attaching the attachments ( but service is unavailable)
Waiting for all of your valuable suggestions..

1) why was I not getting the formula right when I use & Tops
I'm assuming that BE Fixed Cost has N for IsICP, in that case you can not write to invalid intersections as it would attempt to use the same ICP information
2) Is it MANDATORY to have a Plugaccount attribute when we have IsICP turned to "R" ?
No
3) What will happen if we do not have a Plugaccount for the IsICP account ?
It will not run eliminations
4) Do we need to have the IsICP turned on to the immediate parent of the account having IsICP and the Top parents of the account too??
If you want it to rollup, yes you would need that. We have all Parent accounts as isICP set to Y and top member to ICP Entities so that they roll up
5) which will have priority the rule or the Grid where we have the calculated member like the BE Fixed Cost - because in the grid I had icptop, allcustom1,2 3 and when had & Tops to the account - I got some weird numbers...
I'm not following the question here, grids are just really a display mechanism, rules will handle all of the calculations.

How to build shared members using Rules file

hi all,
we have a source file like below,in that Bold members are shared member. we doknow how to modify the source file for building shared members using Rules file.
Conf Total,~,Config A,*Lightbolt 365 A*
Conf Total,~,Config A,*Lightbolt 540 A*
Conf Total,~,Config A,*Lightbolt 730 A*
Conf Total,~,Config A,*Thunderball 365 A*
Conf Total,~,Config A,*Thunderball 270 A*
Conf Total,~,Config A,*Roadranger 123 A*
Can anyone give suggestion to resolve this issue.
Thanks in Advance

hi John,
Here i'm building the dimension through generation build method.
setting the properties as
Field, Dimension, Field Type, Field Number
Field1,Product,Generation,2
Field2,Product,property,2
Field3,Product,Generation,3
Field4,Product,Generation,4
After mapping it shows dimensions are correctly mapped.
When i load the source file and the rule file, it shows error partially loaded data,.And it doesn't shows the shared member property. That is what asked How to modify the source file for building shared members using Rules file.
Thanks,
Edited by: user@99 on 25-May-2010 15:37

How do I batch delete all my protected music files from iTunes.

Hi, in a moment of stupidity, while I was working on a backup folder of my friends files (from his broken computer - copied them to my PC so he could get them back onto his new PC) I managed to copy all of his songs from his iTunes folder into my iTunes library. I don't know how I managed to do this, maybe it was the fact that I was really tired at the time.
I own all my music - none of my music is copy protected (it is either downloaded from legal sites where the bands themselves [usually unknown or alternative artists] release their music, or I ripped the music from CD's I bought) and all of his music is copy protected.
Now thing is, I have upgraded my PC before realising I did this, so now I don't have the original iTunes library (formatted PC and reinstalled XP from scratch) - is there any tools out there that will find and delete all your copy protected files from iTunes?
I could go through song by song and when it comes up with the "Authorise computer - This computer is not authorised to play "******" Would you like to authorise it" and delete those songs, but as this is a very slow and time consuming process and considering I have 8,551 songs, I would prefer a faster way.
I would go and re-rip all the songs, as I have the original discs, but this would take very long, and put quite a bit of strain on my CD drive, and this would not account for all the songs I have spent years finding on the internet/demo songs from friends bands.
Any help is appreciated, as I would love to be able to remove all of his songs so they don't keep popping up in my iTunes library
Thanks in advance.
Dale.

I have never tried this and am not at a computer with iTunes, but can you delete from a Smart Playlist? If so, you could make a smart playlist that shows songs that are of kind Protected ACC. Then select all and delete from that playlist. But I am not so sure if you can delete from a smart playlist.

Substitution variable using in rules file

Hi,
I have a requirement to load the data only for the current month. But, my source file is having data for all the months till current month.
ex: I have to load data for MAY. But, source file is having data from JAN to MAY
Its a monthly process and it should load the data only for the current month using substitution variable.
Means next month I will be having JAN to JUN data. But, I should load only JUN data.
Could any one help in building rules file for this requirement.
Thanks
Sri

Is the data coming from SQL or a flat file? And is JAN through MAY represented in multiple columns or multiple rows?
As Evgeniy says if it's a SQL source, you can use a subvar in the SQL statement. If it's a flat file (and your periods appear as multiple rows) you can use a subvar in a SELECT/REJECT criteria.
Honestly though, if a feeding system is producing a flat file for you, I would try and arrange to have the flat file contain only the data that is actually required. Parsing a file that is up to 12 times larger than necessary is inefficient.

Scrolling through PDF files is slow using Adobe Reader on MY MACBOOK pro with retina

Scrolling through PDF file using Adobe reader on my MACBOOK pro is very slow and stuters. That is even for small files. MAC preview and Adobe pro do not have this issue. It is only Adobe ready.
Please advice.

Summarizing the problem specifics and versions for future readers:
There are two separate "slow scrolling" bugs in recent versions of Adobe Reader on Mac OS X. Symptoms: scrolling by mouse or fn + down arrow is very sluggish and laggy. It is not isolated to large or graphically complex documents. This 2 megabyte PDF shows illustrates the problem: http://www.hq.nasa.gov/alsj/nasa-tnd-6846pt.1.pdf
Problem 1: Adobe plug-in for Safari causes slow scrolling when viewing PDF documents within Safari. Solution: remove Adobe plugins from Mac HD/Library/Internet Plug-ins/AdobePDFViewer.plugin. I also deleted AdobePDFViewerNPAPI.plugin. This will cause PDF display within Safari to revert to the built-in Apple PDF renderer, which is very fast. These files will be re-installed anytime you install or upgrade Adobe Reader.
Problem 2: Stand-alone Adobe Reader scrolling is slow starting with version 11.0.01. Version 10.1.4 and earlier are not slow. User CF McBlob did not experience this slowdown, but was also running Acrobat 10.1.7, which might have libraries which prevented the problem. I'll do further testing when possible to try and isolate more details.
Platform specifics: OS X 10.8.4, late 2012 iMac 27", i7 3.4Ghz, 16GB RAM, 3TB Fusion drive, GPU = GTX675MX, 1GB

Deployment Issue with Rules file

Hi,
We have Rules file issue after the deployment in Development and Re7 environment.
We have modified/created the rules file and after the deployment if we execute the rules file from the treatment then we got the error message like mentioned below.
MAXL> Import database PGC_CHE.Pgc_che data from data_file
"/pgcre701/pgc/subsidiary/che/tfi/pgc_nature_for_data_che.txt" using server rules_file "DO_MX_05" on error
write to "/pgcre701/pgc/trc/PGC_150310_103739_pgc_nature_for_data_che.err";
ERROR - 1019006 - Unable to Read
[/logiciel/epm11/user_projects/epm_inst4/EssbaseServer/app/PGC_CHE/Pgc_che/DO_MX_05.rul], Created Using A
Previous Version.
ERROR - 1241101 - Unexpected Essbase error 1019006.
If the same rules file opened through EAS console from SVN trunk or local and save as this rule file into Essbase server(through EAS console) then the rules file working correctly from the treatment process launch like mentioned below.
MAXL> Import database PGC_CHE.Pgc_che data from data_file "/pgcre701/pgc/subsidiary/che/tfi/pgc_nature_for_data_che.txt" using server rules_file "DO_MX_05" on error write to "/pgcre701/pgc/trc/PGC_150310_134622_pgc_nature_for_data_che.err";
OK/INFO - 1019061 - Reading Rule SQL Information For Database [Pgc_che].
OK/INFO - 1019025 - Reading Rules From Rule Object For Database [Pgc_che].
OK/INFO - 1003040 - Parallel dataload enabled: [1] block prepare threads, [1] block write threads..
OK/INFO - 1003037 - Data Load Updated [18800] cells.
OK/INFO - 1003053 - Data Load Elapsed Time with [DO_MX_05.rul] : [1.16] seconds.
OK/INFO - 1241113 - Database import completed ['PGC_CHE'.'Pgc_che'].
Could you please help us on this point ?
Thanks in advance for your help.
Essbase server 11.1.2.3.501 server LINUX red hat

Hi John,
it's not quite that
I will provide more detail:
In fact, we are 3 server Essbase : development, acceptance and operational there are a lot the new version of Essbase 11.1.2.3.501.
The maxl treatment are launch since a other server : a treatment server that are a client maxl and ESSCMD in the same version.
Before that, I'm migrate all the application and database from all alder server Essbase to this new architecture Essbase.
All application and DATABASE (in BSO) was migrated by expot-import process, the all object (csc, rul, rep ...) was transfer by copy in each directories of database.
The test after migration are very satisfying.
Now, we are on process of life on the Essbase server 11.1.2.3.501.
The back office of India used the usually process to developed the lot.
They take the source on SVN application (take the rule), deployed the rule on the development server, modify the rule and have this error.
This error not appear after migration with the same rule ...
I am skeptical
Tx to your help on this subject.

Load Parent-Child dimension with attributes by rule file

Well, I've cracked my head open while banging against this wall.
Task is plain & simple:
How can I load build dimension from such table, using rule file?
Data
ProductParent ProductChild ProductAttribute
Balls Ball_8 Round
I want to load both product dimension and attribute by single rule file (neither of these dimensions exists in database before load), so I do the following:
1) Set dimension build settings, creating dimension Products (marking it P\C generated, sparse), having an attribute dimension AttributeDim
2) Mark the fields as Parent, Child and AttributeDim of dimension Products
After loading rule file a get three types of errors:
a) "Base member (Balls) association level does not match base dimension association level" -- does this mean that I cannot assign attributes in P\C way?
b) "Record #327 - Can not uniquely identify member by Balls (3335)
Balls Ball_8 Round" -- That's strange, I thought member should be identified by Ball_8 (and this column is unique)
c) "\\Record #418 - Error in association transaction [Ball_8] to [Round] (3362)"
I've read all I could find on topic from this forum, network45 board and going to start my way through metalink3, but maybe some kind soul will rescue me from drowning in information ocean?

Hi,
Outline is blank at the start of load and I expect dimensions Product and ProdAttribute to be added.
Generations are unapplicable, since I can't turn this parent-child dimension (it's ragged) into generation one.
And, by the way Integration Services manages to do this somehow, why rule files wouldn't?

Deleting a dminesion through rules file.

Similar Messages

Maybe you are looking for