Deleting a number of files in one click ?

How do i remove a number of managed masterfiles or
versions in one step ?
If i select a number of photos, file, delete master
image and all versions....then only one photo at a
time will be deleted ?
You can select a number of images and hit COmmand-delete to remove them. For what you described, you may have the single image mode turned on - hit "s" to have your delete applied to all images (there is also a button the s key toggles on and off at the bottom left of the screen).
Secondly, how do i delete all photos in total library
which is marked with "X" ?
Go to the preset smart folders under library, one of them is "rejected". Delete everything from there. I don't think that one looks in stacks though so some rejected images may remain if they are in stacks.

Similar Messages

My iPhone is not backed up due to insufficient storage. I am deleting a number of files but would like to know what 'documents

1: when texting, if I tap e.g. the letter T, occasionally 3 or 4 letters T will follow in rapid succession or when the letter T is highlighted to confirm the letter is correct, it will freeze at that point
. Also, when scrolling through a message thread to find a particular message, sometimes I have no control over stopping at the wanted message - rapid scrolling right back to the first text occurs & often when I then try again, the reverse happens with rapid scrolling (uncontrollably) through the messages to the last message received.
2: My iPhone is not backed up due to insufficient storage. I am deleting a number of files but would like to know what 'documents & data' (17.9KB) under 'PREVIEW' is before hitting 'delete'
Total storage: 5.0GB
last software update: iOS 7.1.1
Many thanks
Andrew
Sydney

Thank u verrrrrrrrrrry much FoxFifth u save my life thank u.

How to copy very large number of files from one drive to another???

I'm a fairly experienced Mac user for serveral years but this problem really has me stumped.
I'm trying to copy or move 152,000 files from one external drive to another drive. I can highlight (Cmd - A) all the files on the first drive and drag them to the second drive but Finder always shows 32,768 files being copied no matter what I try.
Any and all suggestions on how to move/copy a large number of files from one external drive to another are greatefully appreciated.
Thank you in advance,
Mack

I would use the command line tool rsync.
For instance with: rsync -av source-dir destination-dir
-a The files are transferred in "archive" mode, which ensures that symbolic links, devices, attributes, permissions, ownerships, etc. are preserved in the transfer.
-v Verbose, so you see the progress.
Rsync is fast and really, really powerful and many times used in shell scripts and the like to automatically backup and/or sync stuff. Google a bit for more info.

Uploading more then one file in one click.

Hello Experts,
I have a requirement where i need to read multiple files in one click of a button, I wanted to know how to do that.
Right now i am writing the file paths in an excel sheet (.xls) and reading the excel sheet using the file upload ui element. When i try to access the files based on the entry in the excel sheet , i am not able to do it as the files are not in the client system.
I also tried to read the folder in which the files are located but dint succeed. Please help me out in this.. thanks in advance.

hi Sanjeev,
If the files are located at the server you can use FileInputStream class to read data from the files.
try {
               File inputFile =
               new File("C:
Test
Test.txt");
               FileInputStream in = new FileInputStream(inputFile);
               byte b[] = new byte[ inputFile.length()];
                                                                String str = new String(b);
               in.read(b);
               in.close();
          } catch (FileNotFoundException e) {
               // TODO Auto-generated catch block
               e.printStackTrace();
          } catch (IOException e) {
               // TODO Auto-generated catch block
               e.printStackTrace();

Print the html files in one click

Hi All,
I have peculiar requirement in my project.
I am generating the o/p of my robohelp in html files (webhelp). There are number of topics in it.
Now i want the user of this help pages should be able to print the complete help on one click of button or link.
Is this possible? If yes, please let me know the steps to implement it.
thanks

Hi there
I'm doubtful you can make that happen. I think the best you can probably do is to create a PDF version of the entire help system. Then add that back in as a Baggage File. Create a link to the Baggage File that your user may click to open the PDF and they may print from there.
Cheers... Rick
Helpful and Handy Links
RoboHelp Wish Form/Bug Reporting Form
Begin learning RoboHelp HTML 7 or 8 moments from now - $24.95!
Adobe Certified RoboHelp HTML Training
SorcererStone Blog
RoboHelp eBooks

In the bookmark panel, how can I close all bookmarks files with one click?

Every time I want to have just the files on the panel I have to close them on by one to have a genéral view of my bookmarks organisation. It would be so nice to have a feature to close everything with one click. But so fa I have been unable to find a solution. Thanks if you can help!

Maybe Autoclose Bookmark&History Folders: http://www.sephiroth-j.de/1/mozilla/#ac-btf

Uploading Multiple files in One-Click!!!

Hi All,
I have got nearly about 900 PDF files in my file server which need to be uploaded to the KM CONTENT Repository.
what is the best methodology to upload all these file in to the repository in one click.
Is it possible to achieve this??
Eagerly waiting for replies.
Regards,
Kavitha

Hi Patric,
It is quite interesting to see that there is a way to upload multiple files in a click.
I just followed your way. i copied the WebDAV URL and pasted and executed in a new browser. and i get....
The folder you are looking for has no displayable content.
You can try one of the following:
Access the folder using the Navigation user interface.
Access the folder as a Web folder. Your operating system and browser dictate whether or not this will work. "
When i choose "Web Folder", i get a pop up and it says "The web folder address Internet Explorer was given was too long. Please use a shorter address."
When i choose "Navigation User Interface", iam taken to the default KM Folder.
I nowhere able to see the folder structure like what you have mentioned in your reply.
Kindly help me out.
Regards,
Kavitha

Files Panel: opening file in one click ?

By default a double-click is needed on a file icon to open
its content in the editor.
Is there a way to customize Dreamweaver CS3 in order to
display a file content from the Files Panel in only one click ?

I don't know of any.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"olagato" <[email protected]> wrote in
message
news:fo56ap$bpa$[email protected]..
> By default a double-click is needed on a file icon to
open its content in
> the
> editor. Is there a way to customize Dreamweaver CS3 in
order to display a
> file
> content from the 'Files Panel' in only one click ?
>

Downloading files in ONE CLICK

I was wondering if there is a way on my MBP to set it up so I can click on a file (picture, link, etc ) to download, and instead of having the "save image as" dialogue box pop up, (after hitting Control-Click) it just immediately downloads without having to do anything else? Is there a way to do this in ONE click (not having to hit both control-click), or just control click and NO "save image as" box popping up?
Thanks for any advice.
Message was edited by: Jack Q
Message was edited by: Jack Q

I usually just drag images onto the desktop ~ click, hold, drag. At least it's only one click
Upgrade to Leopard OSX 10.5.5 and get the 'two fingers on trackpad' click instead of ctrl click.
Best.

Batch Print multiple files in one click

I created an Automator app that allows the user to:
1) Ask for multiple Finder Items
2) Print Finder items
Problem is that when it runs I have to click the OK button in the print dialogue once for each individual file. If I run this workflow for 80 files to be printed I have to hit the OK button 80 times! I just want to automate this action too, but cannot find a way to do this.
Is there a way to click just once and have all files printed the same way?
TIA

Thanks for helping.
They are all .ods files created by OpenOffice macros from our intranet based MySQL database that are saved to our Tiger Server fileserver. We run a report from the intranet php interface which opens a OpenOffice Spreadsheet macro file, this then populates the template file with each data record one at a time that have been called directly from the SQL query, and then saves the files in a folder it creates for the purpose. It's a bit long winded, but it works. Neither Excel nor Numbers offers this ability.
After the files have been saved they need to be printed. The Automator app I created does nearly all I want, but is not 100% automated as each separate file needs an individual 'OK' button press, which is annoying.

How to merge n number of files in one file

Please help me

Open a new file and write chunks one by one...
FileOutputStream out = new FileOutputStream("file");
for(String chunk: chunks) {
FileInputStream in = new FileInputStream(chunk);
// copy contents from in to out
}This code is just an idea, it is better to use channels instead of streams, do not forget to close chunks after reading is complete etc. Is it helpful? :-)

Max number/size of QT files on one scratch folder

Is there a limit to the number of files in one scratch folder? Is it helpful to partition a big drive like I would on an Avid.
Can't seem to find any limits in the manual.
John
G5 Mac OS X (10.4.6)

I wouldn't partition the drives unless they are sort of slow and old... it just takes up space. In the old Avid days I had, you needed to do this to keep video files off the slowest area of the arrays, but that isn't much the case anymore because the drives are so much faster than they used to be.
There is no limit to number of files either, just limited to your storage space.
Jerry

Deleting multiple items in one click

Hi Guys
My iTunes has been reset and has for some reason added all the songs on my computer twice = about 120GB when it should only be 60GB.
I'm sure there used to be a way to delete multiple items in one click but the only way I can seem to do it is by doing it individually after click view duplicates, this clearly isn't practical for over 5500 songs.
Thanks for the help!

Thanks for the answer.
If I understand it correct, If I have an invoice of 10+ items, there is no possibility to delete 5 items for example with one click?
I have to the delete the 5 items one by one or delete the whole invoice and start again?
Thanks.

In xcode i deleted my default.png file and know my app says 0 target and missing base sdk how can i fix this please

please help mw fix my app i deleted my default .png file the one that displays an image when u first run the the and after i deleted my app wont run and says at the very top 0 target , missing base sdk. how can i fix this please help.

hello , i did exactly the same thing , and my app store icon look like this :
http://i.imgur.com/FIrph.png
so can you tell me how did your friend send the app store for you? please

Delete photo's from organizer catalogue AND disk with one click?

Hi,
When deleting photo's from the organiser, PSE asks if i only want te remove the file from the organizer catalogue, or as well from the disk. In fact, i always want to do that. Now, it takes 2 clicks to confirm to delete a photo, which is time-consuming.
is it possible to delete photo's from the organiser as well from the harddisk with one click? (or, just by clicking 'delete'.)

fatmax3m wrote:
Well, thats your opinion. IMHO, it's truly crappy. When sorting out photographs, en wanting to delete a hundred, it's really not convenient having to do all those extra clicks.
I think Adobe should offer some tweaking features, for questions like this...
But, thanx for the answer.
If your main issue is to delete rapidly hundreds of files from disk, there are better ways in the Organizer. Did you notice that deleting a single file from catalog and disk is slow ? Even deleting a dozen of selected files from disk (a single additional click) is slow. So, the best choice is to work in two steps. The first one is to select all the files to be deleted (a hundred, a thousand...) and mark them in some way : using the 'hide' feature, assigning a 'tobedeleted' tag (immediate even for dozens of selected files); then with all the files selected, delete from disk (and go drink a coffee...).
I won't discuss the obvious question that those last methods let you check all possible deletions before committing the undoable choice

Deleting a number of files in one click ?

Similar Messages

Maybe you are looking for