Deleting a user in AD using Oracle Workflow

Hello.
I have a very unusual scenario that I want to solve.
We are developing an application using Oracle Workflow in which we are simulating the process of deleting a user from several systems. In one of the steps of the process we have to invalidate the user in MS Active Directory.
Using OID it's possible to do that? Any clues on how to do it?
Thanks In Advice.

adi,
Yes, the Change User Password workflow is called even if the user logged in using "forgot my password" questions.
By default, IDM commits the user passwords before the "Change User Password" WF is called (unless you set the deferCommit option), so the problem may be that your function isn't getting called or receiving valid input. Can you verify that your code is actually called?
The workflow goes like this: (1) Start; If there's an uncommitted password view (there isn't by default) -> (2) CommitView -> (3) Now reprovision the user.
If you're depending on the transition to CommitView, that may be why your code isn't being called.

Similar Messages

Custom Workflow using Oracle Workflow in ContentDB

Hi,
Could we use custom workflow which is made using Oracle Workflow instead of BPEL.
Regards,
Yulisar

Having registered custom workflows for Content DB via Enterprise Manager, potentially you can use any tool capable of dequeuing/enqueing messages from the IFS_BPEL_OUT/IFS_BPEL_IN advanced queues as part of a custom workflow process.
By default, we assume you are using Oracle BPEL PM with its Advanced Queue adapater to process the queue messages. However, there is nothing stopping using Oracle Workflow or any tool for that matter.
HOWEVER!!! Warning!!! There is a high probability that Content DB will drop the bundled Oracle Worflow installation in the near future. What this means, is that you should consider installing/configure/patching your own separate Oracle Workflow installation and not rely on the bundled Content DB solution which is used internally for Serial and Parallel Approval workflows.
thanks,
Matt.

How to use Oracle Workflow in Apex

Hi All,
I want to use oracle workflows in my apex application.
can anybody tell me how can I get this ?
Thanks in advance..
Database version : 11g XE
Apex version : 4.0
Nagesh Patil

Nagesh.Patil wrote:
Hi All,
I want to use oracle workflows in my apex application.
can anybody tell me how can I get this ?
Thanks in advance..
Database version : 11g XE
Apex version : 4.0
Nagesh Patil
Oracle Workflow is only available as a component of EBS. It has never been available on, and is not certified for Oracle 11g, nor any version of XE.

How to design Forms and Reports using Oracle workflow 2.6

Is it possible to design Forms & Reports for Data Entry and
reporting purposes using oracle workflow standalone version?
if so how?.
Please helpme!! is veri urgent.

Con este apellido seguro que entiendes el Espaqol.
Mi empresa esta iniciando un proyecto con la tecnologia que
estas buscando, es decir, Utilizar Forms y Reports para manejar
las APIS de WorkFlow Server, hemos encontardo muchos problemas,
el principal es que la API de WorkFlow es demasiado pequeqa para
manipular todos los procesos de WorkFlow por este motivo nos
hemos visto obligados a acceder a tablas y vistas del modelo de
datos de WorkFlow.
Saludos.

Modify process flows using Oracle Workflow

Hi,
I'd like to use Oracle Workflow to enhance the process flows created using Warehouse Builder, as some features are missing if compared with the full-blown Workflow Builder, and it is desired to integrate OWB processes in larger ones. I have successfully applied changes on the Workflow processes generated from OWB but it's not clear how far I can go, especially because I don't want to lose too much of the benefits of the original Workflows:all mapping results should continue to show in the Runtime Audit Browser, and it shouldn't be impossible to deploy the processes in a new environment.
I am worried that when I change the processes manually in Workflow, I lose the possibility to re-deploy automatically from OWB, but this is tolerable as long as the final Workflow processes are maintainable and deployable.
Has anyone tried a similar approach? How much can it be feasible/supported??
regards, Antonio

Jean-Pierre, thank you very much for your reply.
I'm still evaluating what will be done through OWB and what through OWF. However my first attempts were oriented along the lines you suggest, that is to keep the process flows generated by OWB untouched, and use them as building blocks for larger processes. At the moment I am trying to realize what balance gives the best result. One extreme would be to use OMB scripting to wrap mappings in very simple generated processes, deploy them and build all the workflow logic in OWF. The other extreme would be to implement complete workflows through OWB and modify them through Workflow, but I'm sure this would certainly not be supported (as the Workflow developer manual states).
My intent is to use OWF to add some flow logic I find difficult to introduce using OWB, especially for recovery actions, eg I added a join operator to the standard AND and OR, which purpose is to wait that all joining processes complete and than to branch depending on a failure in any process. I don't want the following recovery/logging actions to start unless processing has stopped.
I built such logic very easily throw OWF but it's very involved using OWB, unless I'm missing something...
Antonio

Any good books on using Oracle Workflow?

I'm trying to get my hands around the topic of workflow, specifically using Oracle Workflow Builder and was wondering if anyone knew of any decent books out there....

Oracle documentation may be of help.
Try these.
http://download-west.oracle.com/docs/cd/B13789_01/workflow.101/b10284/toc.htm
http://download-west.oracle.com/docs/cd/B13789_01/workflow.101/b10285/toc.htm

Process Flow Deployment using Oracle workflow

Hi,
If I have my own Process Flow in XPDL, can I deploy it to the Oracle workflow? I couldn't find any doc regarding how Oracle workflow (standalone) imports XPDL file.
Is the Oracle workflow packaged with the OWB comes with some adapter that understand the XPDL process flow?
I have an application that may output process flows in XPDL, and I want to deploy them to Oracle workflow for processing. How do I do that?
Thanks,
Denny

Hi,
I´ve used it in 2 system as a DM. It works fine. But I have to say that they were a small project.
OWF is a very robust and easy tool. I´ve never need to look for another workflow because OWF always cover my project. When it doesn´t, I´m able to change some pl/sql procedures to make it attend project requirements.
I can advice you that if you want a personalized user interface, you are going to spend more time doing it than developing your workflow. but if you don´t need to personalize user interface, so it is very easy do develop and deploy a workflow.
Any doubt just ask.
Regards,
Luiz Soares

Anybody uses Oracle WorkFlow?

I'm trying to install Oracle Workflow but I've got no success. It gives me an error of incorrect password for the SYS user, just like when I was trying to install the WEBDB.
Then I was searching the forum for the word "WorkFlow" and there is 19 matches (now 20 I suppose!). There is any forum to discuss this product ? I have to evaluate it, but if anybody in the world is using it, I think I can't recommend it (it's not installing too...)

I had trouble with the same problem.
On my system there where the following situation:
some times ago I have installed a 8i Database Server and now I wanted to install Workflow 2.5. I have done this in another Oracle_Home-Directory, like discribed in Oracle Documentation.
If there is an quite similar situation on your system, the following could help you:
Do an entry in the controlpanel of WinNT under "system->environment" for the duration of installation. Set a value for the ORACLE_HOME-variable that points to the directory, where your WebDB is installed.
Then the oracle installer will find your service name in the file "tnsnames.ora" and is possible to connect to database.
Regards.
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by atorres ([email protected]):
I'm trying to install Oracle Workflow but I've got no success. It gives me an error of incorrect password for the SYS user, just like when I was trying to install the WEBDB.
Then I was searching the forum for the word "WorkFlow" and there is 19 matches (now 20 I suppose!). There is any forum to discuss this product ? I have to evaluate it, but if anybody in the world is using it, I think I can't recommend it (it's not installing too...)<HR></BLOCKQUOTE>
null

How to view/edit/delete the user created profile in oracle 9i? Very Urgent

Friends,
I logged in as system in oracle 9i.
SQL> create profile testpro limit
2 idle_time 1;
Profile created.
SQL> alter user scott profile testpro;
User altered.
Then i logged in to sqlplusw as a scott user.
and i waited for 10 mins after that.
sql> select * from cat;
its working......
how come? i have already set a idle time to 1 minute.
Please correct me if im wrong.
Also, how can i view/edit/delete the user created profile.
Thanks & Regards
Sathyguy
Message was edited by:
sathyguy

The resource limits set for a profile are enforced only when you enable resource limitation for the database.
Enabling and Disabling Resource Limits While the Database is Open
ALTER SYSTEM SET RESOURCE_LIMIT = TRUE;
http://download-west.oracle.com/docs/cd/B10501_01/server.920/a96521/users.htm#15451
Manu

Want to export database not user. i am using oracle 8i and developer 6i.

i am using oracle 8i and developer 6i. i have created a button(when_button_pressed) on d2k with this command mentioned below. it is working only for user objects but i need to export database. how can i do this?
declare
     com varchar2(100);
begin
host('exp tAJCO/tAJCO@tajco file=D:\dump\tajco.dmp');
if
     not form_success then
     message('Export failed.');
else
     message('Export successful');
end if;
end;
please help me.....
thanks
mostafiz

mostafiz,
To Export entirel database, use the statement
     Host('EXP tAJCO/tAJCO@tajco FILE=D:\dump\tajco.dmp FULL=YES DIRECT=Y',NO_SCREEN);
Regards,
Manu.

How to build and use Oracle workflow with Content DB

Hi All,
do we have any documentation that assist us in developing and applying the Oracle workflow (Developed using the Oracle Workflow builder) to the contentDB folder.
Is there an alternative other than using the BPEL or oracle workflow builder for developing the workflows that work with Content DB.
Thanks
Krrish

Hi Krrish
From a custom workflow perspective, Content DB uses a loose coupling mechanism based on advanced queue messages to integrate workflow engines.
CDB has no specific BPEL code/support - but rather requires the workflow engine to be able to dequeue a message from the outbound queue (IFS_BPEL_OUT), and return an approve/reject response queue message on the inbound queue (IFS_BPEL_IN). As Oracle BPEL supports advanced queue tables, it can thus be leveraged from Content DB.
Hence, you can potentially use any workflow mechanism/tool you like, so long as that it is able to obtain a message from the outbound queue, and respond on the inbound queue.
As far as Oracle Worflow is concerned, we don't ship with any documentation/samples to describe/develop its workflow processes. Nor do we support replacing the out-of-box Oracle Workflows.
cheers
Matt.

Creating user in LDAP using Oracle Identity Store API

We are trying to create users in LDAP (open LDAP) using Oracle's Fusion Middleware's Oracle Identity Service API. Here is my code snippet to create user,
          final IdentityStoreService identityStoreService = jpsContextFactory
                    .getContext().getServiceInstance(IdentityStoreService.class);
          IdentityStore idmStore = identityStoreService.getIdmStore();
          final Property statusProperty = new Property("status", Arrays.asList("active"));
          final PropertySet propertySet = new PropertySet();
          propertySet.put(statusProperty);
          idmStore.getUserManager().createUser("userid", new char[0], propertySet);
but I am getting this error
Caused by: oracle.security.idm.IMException: Mandatory attribute missing :status
     at oracle.security.idm.providers.stdldap.util.LDAPRealm.createUser(LDAPRealm.java:139)
even though I am clearly adding the attribute as mentioned above, am I missing any thing?
Thanks for your help :)
Full stack trace:
oracle.security.idm.OperationFailureException: oracle.security.idm.IMException: Mandatory attribute missing : status
     at oracle.security.idm.providers.stdldap.util.LDAPRealm.throwException(LDAPRealm.java:785)
     at oracle.security.idm.providers.stdldap.util.LDAPRealm.createUser(LDAPRealm.java:153)
     at oracle.security.idm.providers.stdldap.LDUserManager.createUser(LDUserManager.java:170)
     at oracle.security.idm.providers.stdldap.LDUserManager.createUser(LDUserManager.java:121)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at org.apache.cxf.service.invoker.AbstractInvoker.performInvocation(AbstractInvoker.java:173)
     at org.apache.cxf.service.invoker.AbstractInvoker.invoke(AbstractInvoker.java:89)
     at org.apache.cxf.jaxws.JAXWSMethodInvoker.invoke(JAXWSMethodInvoker.java:61)
     at org.apache.cxf.service.invoker.AbstractInvoker.invoke(AbstractInvoker.java:75)
     at org.apache.cxf.interceptor.ServiceInvokerInterceptor$1.run(ServiceInvokerInterceptor.java:58)
     at java.util.concurrent.Executors$RunnableAdapter.call(Executors.java:441)
     at java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:303)
     at java.util.concurrent.FutureTask.run(FutureTask.java:138)
     at org.apache.cxf.workqueue.SynchronousExecutor.execute(SynchronousExecutor.java:37)
     at org.apache.cxf.interceptor.ServiceInvokerInterceptor.handleMessage(ServiceInvokerInterceptor.java:106)
     at org.apache.cxf.phase.PhaseInterceptorChain.doIntercept(PhaseInterceptorChain.java:263)
     at org.apache.cxf.transport.ChainInitiationObserver.onMessage(ChainInitiationObserver.java:118)
     at org.apache.cxf.transport.http.AbstractHTTPDestination.invoke(AbstractHTTPDestination.java:208)
     at org.apache.cxf.transport.servlet.ServletController.invokeDestination(ServletController.java:223)
     at org.apache.cxf.transport.servlet.ServletController.invoke(ServletController.java:205)
     at org.apache.cxf.transport.servlet.CXFNonSpringServlet.invoke(CXFNonSpringServlet.java:113)
     at org.apache.cxf.transport.servlet.AbstractHTTPServlet.handleRequest(AbstractHTTPServlet.java:184)
     at org.apache.cxf.transport.servlet.AbstractHTTPServlet.doPost(AbstractHTTPServlet.java:107)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
     at org.apache.cxf.transport.servlet.AbstractHTTPServlet.service(AbstractHTTPServlet.java:163)
     at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
     at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
     at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:111)
     at java.security.AccessController.doPrivileged(Native Method)
     at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:313)
     at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:413)
     at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:94)
     at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:161)
     at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:136)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3715)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3681)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
     at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2277)
     at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2183)
     at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1454)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:207)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:176)
Caused by: oracle.security.idm.IMException: Mandatory attribute missing :status
     at oracle.security.idm.providers.stdldap.util.LDAPRealm.createUser(LDAPRealm.java:139)
     ... 52 more
Edited by: 940837 on Jun 14, 2012 5:00 PM

URGENT** How to change OIM user password from outside OIM

Delete entire database i m using oracle 11g enterprise version

Hi,
I want to delete entire database from my laptop, actually I have installed 3 databases Oracle11g, I want to delete all of them . I have deleted it from registry but also its not totally deleted from my system.

Hello,
I want to delete entire database from my laptop, actually I have installed 3 databases Oracle11g, I want to delete all of themIn fact there are 2 things, the Databases and the Software.
If you intend to DROP the Databases, and if these Databases were created by DBCA, you may use DBCA to DROP them. If the Databases were created manually you have the DROP DATABASE statement as follow:
http://download.oracle.com/docs/cd/B19306_01/server.102/b14200/statements_8009.htm
About the Software, the answer depends on the Oracle Release.
In Oracle *11.1*, OUI let you deinstall the Oracle installation.
In Oracle *11.2*, you need to use the Oracle De-install Utility (11.2.0.1.0) for Microsoft Windows.
Hope this help.
Best regards,
Jean-Valentin

How to find the users of teamviewer using oracle database?

Friends,
DB: 9iR2
OS: RHEL AS 3
Client pc: win xp
We have 3 branches. One of our user accessed our application from the other branch using teamviewer.
is it possible to find the user from the database side?
i mean from the v$session or from any other table.
thanks

Hello,
you can use folloiwng script to see the OS user, database user and the programme they are using to connect to database.
SET TRIMSPOOL ON TRIMOUT ON ECHO OFF VERIFY OFF HEAD OFF FEEDBACK ON LIN 150 PAGES 10000
set linesize 150
CLEAR BREAKS COMPUTES
COL type_grp NOPRINT
COL logon_time NOPRINT
COL logontime FOR A14
COL osuser FOR A21
COL username FOR A28
COL lastcall FOR A14
COL program FOR A50
--COL program FOR A&plen
BREAK ON type_grp SKIP 1
--PROMPT
PROMPT **************************************************************** SESSIONS INFORMATION ****************************************************************
PROMPT
PROMPT |------- O/S -------|--------- ORACLE ----------| Logon | Last Call | |
PROMPT |Username | Pid |Username | Pid | 'SID,Ser#'| DateTime | DateTime | TYPE | PROGRAM
PROMPT |_________|_________|_________|_____|___________|______________|______________|__________|____________________________________________________________
SELECT ' '||rpad(nvl(osuser,p.username), 9) ||lpad(nvl(s.process,p.spid), 10) osuser,
rpad(nvl(s.username,' '),9) ||lpad(decode(s.sid,'','',p.spid), 6) ||lpad(decode(s.sid,'','',''''||s.sid||','||s.serial#||''''),12) username,
to_char(logon_time,'mm/dd hh24:mi:ss') logontime,
to_char(sysdate - (s.LAST_CALL_ET / 86400),'mm/dd hh24:mi:ss') lastcall,
s.type,
nvl(s.program, p.program) program,
s.type type_grp,
logon_time
FROM v$session s, v$process p
WHERE spid is not null
AND s.paddr (+) = p.addr and s.username not in('SYS','SYSTEM','SYSMAN','DBSNMP')
ORDER BY s.type, logon_time, s.sid;
set head on;
Regards,
Anil Malkai

Can't open workflow from database using Oracle Workflow Builder

I get the error "1004: Language is not enabled, please refers to Workflow documentation for steps on enabling a language"
Any idea

Kostas,
You need to ensure that your 'NLS_LANG' setting on the PC on which you are using WF Builder matches the database NLS_LANG
setting.
This is set to <LANGUAGE>_<TERRITORY>.<CHARACTER SET>
e.g. AMERICAN_AMERICA.WE8ISO8859P1

Deleting a user in AD using Oracle Workflow

Similar Messages

Maybe you are looking for