Deleting an empty blank space?

I've used the milano template on pages to create my CV, however the text at the top (i think is classed as a header) is seperated from the main text by a blank space which i can't seem to delete... I've tryed pressing backspace in case there's any spaces or "returns" there, that didn't work. I tried to change paragraph spacing and that didn't work, unless i'm doing it wrong. Using "show invisibles" and "show layout" i can't see anything that's deletable! Help!
I've attached a picture, which is obviously blurred out as it has nearly all my contact details... Just so you can see what i'm talking about. As i said before, the pages has "show invisibles" and "show layout" on from the "view" drop down list.

It is a subtle use of the Layout function. I had to eliminate all other possibilities first.
Apple is not making this easy or obvious for what I imagine must be the target market, people who don't know layout.
Peter

Similar Messages

Can't get rid of empty blank space at top of website

I'm sure this is quite simple, but I'm stuck!
I can't get rid of the empty space between the Header
"Upcoming Events" and the text way way below. Any advice or
suggestions would be greatly appreciated.
http://www.uvanyc.org/community/event_upcoming.html
Thank you in advance for your time!

Hello,
This is the problem:
<td class="body" height="6137">
Get rid of the height="6137". Let the content determine the
height of the
cell.
Take care,
Tim
"UVANYC" <[email protected]> wrote in
message
news:g36o27$1b0$[email protected]..
> I'm sure this is quite simple, but I'm stuck!
>
> I can't get rid of the empty space between the Header
"Upcoming Events"
> and
> the text way way below. Any advice or suggestions would
be greatly
> appreciated.
>
>
http://www.uvanyc.org/community/event_upcoming.html
>
> Thank you in advance for your time!
>

Issues in exporting SSRS report to PDF format in Report Server - Blank spaces are deleted

Hi Gurus,
I have a problem in exporting SSRS report to PDF format. It deletes all the blank spaces when I use bullet in a Text box and try to export to PDF formt in Report Server . For example
• Project submitted to the TRC
Result in PDF format:
• ProjectsubmittedtotheTRC
I also noted that when I try to export to PDF in Visual Stuio 2005 (Business Intelligence development studio), it does not delete any blank spaces and shows the correct aligned Data in PDF format.
Please help me as it is frustrating a lot
I would highly appreciate for your quick response

Was there ever a solution found for this as i have the same issue.
When bullet point is entered in a field all the spaces are removed when exported to PDF
i tried exporting to excel and it does not remove spaces, however this is no use to me as it needs to be in PDF
Using IE 7 (Don't think the browser has anything to do with it as this happened via a subscription)
Didn't know SSRS had specific Service Packs, i though they came as patches to SQL Server (SQL Server is on Service Pack 3)
This should be easy to replicate all you need to do is copy text containing a bullet point into a sql server database field and then add this field to a report export to pdf and the spaces are gone
Thanks in advance,
Mark Brunton
brunzire

Blank space / # appearing in KCH3

Hi Guys,
could anybody please let me know how to delete # or blank space which is appearing in KCH3.
is thisany cause of the program error??
I hope there is another way to delete the node and recreating it, but we dont want to do that.
thanks

Hi geetha,
thanks for the mail.
but when i am trying to deleting that # or blank space it is throwing me a error message as
Value maintenance not allowed ->Standard Hierarchy

I recently deleted a partition on my mac that was intended to install windows. Now it is just blank space. I attempt to resize my Macintosh HD partition to cover entire hard drive space and hit apply but nothing happens (disk utility). Any ideas?

I have a few problems...
I wanted to make a partition to install windows, I tried to use bootcamp 5 where it wanted to partition and install windows at the same time. I do not have a cd of windows but instead had it on a flash drive. Bootcamp couldn't find it. Instead I was reading forums and found that there was another way to install windows by partioning your harddrive using the disk utility, downloading the bootcamp drivers, and installing rEFIt (an app that when starting the compouter a menu would come up to boot windows from the flashdrive). I try that and the windows install screen gets me to the point where I pick a partition. I attempt to pick the partitioned drive but a message comes up telling me that "this is of the GPT partition style" and windows cannot be installed on the drive.
So now I went back to disk utility and deleted the partition but there is still blank space. I wanted to retry and install windows through bootcamp (somehow) but a message comes up that there cannot be any partitions or that a partition must be created using bootcamp. SO i keep trying to drag the partition over the blank space and hit apply but nothing happens.
By the way I was trying to install windows 8 pro, some forums would say that you cant install win8 however I found others that said you could. How do I fix my partition and how do I use bootcamp to install windows (preferrably 8)?

Csound1 What Ive been trying to explain is that I have been running bootcamp, I open the app where the first screen is the introduction, i hit continue, the first time I select "download the latest windows support software fromm Apple" then I return and instead select "Install Windows 7." Then hit continue. The third screen is where I "Create a Partition for Windows" I set Windows to 80 gigs then hit INSTALL. As stated before Bootcamp cannot find the install drivers saying "The installer disc could not be found." My windows software is on a USB drive not a disc, I tried using a virtual disc reader to make it appear that the windows software was running on a disc, still no luck. What I would like to know is how to install windows on bootcamp.

How to delete blank space from value of Infoobject in the transfer rule

does anyboady know how to write a routine in the transfer rule in order to delete ending blank spaces from value of Infoobject 'ORDTEXT'. E.g. value: 'ABM '? After routine, the result should be 'ABM'.
Thanks for any input.

Deleting 'ending blank spaces' from a character type field (ie info-object or text) in SAP is not meaningful. For all usage, a char type field of length 8 having value 'ABM ' is same as 'ABM'.
Ok, HTML is changing the display in the above, so let me restate it
For all usage, a char type field of length 8 having value 'ABM_____' is same as 'ABM', take the underscore character (_) in the first string as a placeholder for space character.
Edited by: Ajay Das on Jul 29, 2009 12:07 PM

Deleting blank spaces in internal table

Hi Gurus,
I want to delete the empty spaces of a particular field in internal table.I used condense and shift statements but didnt work because the work area value is already condensed.I am not sure why the internal table field is having so much of empty spaces to its left.It's a character field with length 60.
Please suggest.

Hi,
This is the rellevant code
LOOP AT IT_HIER INTO WFL_HIER.
        WFL_FINAL-NODEID = WFL_HIER-NID.
        WFL_FINAL-IOBJNM = WFL_HIER-IOBJ.
        WFL_FINAL-NODENAME = WFL_HIER-NNAME.
        WFL_FINAL-PID = WFL_HIER-PID.
        condense wfl_hier-desc.
        WFL_FINAL-DESCRIPTION = WFL_HIER-DESC.
        SHIFT WFL_FINAL-DESCRIPTION LEFT DELETING LEADING SPACE.
        APPEND WFL_FINAL TO E_T_DATA.
        CLEAR WFL_FINAL.
        CLEAR: WFL_HIER,OUT.
      ENDLOOP.
The problem is not with the work area.
Say if I have a value apple in the work area wa, (wa - 'apple').
It doesnt have any leading sapces to the left.
But when I am appending it to the internal table it gets posted at the last say like this (it - '                                       apple'.
It occupies the last five characters.
Not sure how to resolve this.

Deleted audio segment leaves blank space that I can't remove

I had a 5 min song and after adding pictures for a slide show, I found I only needed 2:30 of the audio clip so I split it at the end and deleted the unwanted end segment of the song. However, there is now a blank space for 2:30 left!
I went to clip mode like some suggested in previous similar questions, but there is "no black clip" to select and delete.
How can I "shrink" or reduce the original movie length now that I've shortened it by removing the end part of the audio?
Thanks!

I have experienced the same thing. It used to be thought that a stray audio clip had relocated to further out on the audio track, but I never found one. Usually, the movie reverted back to end where the 'good' audio or video clip ended.
However, I highly endorse what Bengt recommended re: exporting your movie to Full Quality QuickTime.
I do that and then put the quicktime movie into a new iMovie project and check the end of it. Sometimes there will be several seconds of 'snow' as seen on tv in the old days when stations went off the air at 1am. You can cut out this excess and have your movie end where it is supposed to. Just use this qt version to upload or import into iDVD.

Bunch of blank spaces before my contacts--can't delete

After I added all of my contacts the first time they disappeared for some reason... then I resynched with google but somehow the blank spaces are all still there...and I have to scroll through them all before I can get to my contacts. I can't delete them. Thanks for your help.

So you are seeing blank contacts, not just blank spaces IN several contacts?
Try a simple reboot: With the BlackBerry device powered ON, remove the battery a few seconds and then reinsert the battery to reboot.
Why can't you delete them? No options to do delete?
Can you delete them from your google web page?
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

I recently deleted approximately 80gb of space on my hard drive by dragging items to the trash and then emptying the trash. However, the space does not show up on my HD as free. Can anyone point me in the right direction?

I recently deleted approximately 80gb of space on my hard drive by dragging items to the trash and then emptying the trash. However, the space does not show up on my HD as free. Can anyone point me in the right direction?

If you are using File Vault, turn it off. To find out where all the extra space is use any of these products - Disk Inventory X
OmniDiskSweeper
WhatSize
SpaceControl

I need to Delete the empty space page of report

I need to Delete the empty space page of report
http://imageshack.com/a/img540/191/nrOwz6.jpg
I Need Help!!
Thanks

Hi yha10,
Per my understanding that you want to add one textbox at the bottom of the tablix and make it display as the last on each page after the tablix, you have try to add the page footer but if there is little record in the report you will got some space between
the report footer and the last row of the tablix, right?
If you don't want to display the space and I suggest you don't use the report footer and you can take reference to the details information below to display the information as the last row of the tablix on each page:
Right click the Details in the Row Group and select to Add Group-->Parent Group:
and add this expression in the Group By:
=Ceiling(RowNumber(Nothing)/10)
(10 is the number of rows you want to display on each page)
Right click the row group to select the "Group Properties" and add page break by check the "Between each instance of a group":
Right click the first column which the Group located and select the Insert Row-Inside Group-Below:
Select the Entire Column1(Group) and delete columns:
Merge the entire last Row and type the information "I need to show on all the page" in it:
If you still have nay problem, please feel free to ask.
Regards,
Vicky Liu
Vicky Liu
TechNet Community Support

Blank Space (Line) Everytime I delete a track in my Itunes Library

Hi Guys
Im currently having an annoying problem with Itunes. Its been happening for a while but it didnt bother me too much.
Everytime I delete a track from my library, it leaves a blank space where the track was and you cant navigate past it if skipping tracks by pressing left/right on the keyboard...all it does is return my library back to the top/bottom depending on which way you press to skip.
Ive seen that some other people have had this problem but no solution has been posted. Anyone got any ideas?
Any reply would be greatly appreciated. Thanks

The reason it does this? It's a bug in itunes 9. Folks never saw it in previous versions.
A solution will have to come from Apple programmers after they figure out how to fix it.
There are several previous threads about it. The more people who report it, the better chances of it getting fixed. Random bugs like this are the most difficult to fix. If anyone can get it to happen consistently, even better chances of it getting fixed.
I've reported it to apple, and so have a few other folks. The only way to counter it is, change views.

Adobe Pro XI deletes and/or replaces letters with blank spaces or an x

How do I fix the problem where Adobe Pro XI deletes and/or replaces letters with blank spaces or an x.
This is really annoying to have to go back to each thing I type into a document and re-choose the fonts to get them to be correct.
Thanks for your help!

Adobe is a company, not a program... do you mean ACROBAT Pro?
If yes, this is the Premiere Pro video editing forum, you need to go to http://forums.adobe.com/community/acrobat

How to get rid of all the blank empty white space at bottom of photoshop palettes?

on a large screen the palettes can have big tall empty white spaces below the last imput. Sometimes the corner size adjustment box is off the screen
and I want to eliminate the empty space..
Can I eliminate this extra blank space (without changing display resolution)? Why is it there?

When I take a screen shot see attached It shows the bottom of the, in this case, layers and channel, patettes but it is not actually visible or accessible on my cinema 30" screen. I know I can change the resolution so the size adjustment boxes can be reached and resize the white space away in that manner, but I like the resolution as is 2048 x1280 for my bad eyesight and continually resizing seems like wasted effort. There is no purpose for the extra white space so I want to make it so the palettes only show what is in them. Probably not possible?
separate issue: can you make it so the tool bar is alway in the front? Why should it ever be behind anything?

How do I delete the blank space at the beginning or end of a project?

I constantly end up with blank space at the beginning or end of a project - how do I remove it? I get this ALL the time and I jsut can't get rid of it. Obviously I want my project to start at 0.00 not at 1.xx.
Thanks.

That's not a project. You're inside an multicam angle editor. You need to edit the multicam clip into a project. That's where you edit it.

Deleting an empty blank space?

Similar Messages

Maybe you are looking for