Deleting an entire IS project

Hi,
What is the fastest way to delete an IS project with all its childs (rules,bindings,scorecards, ... etc) all at once? without deleting them one by one.
Even from CMC, you can't delete a project unless you clear all its childs.
Please help as deleting them manually is really troublesome.

Hi Abdullah,
If you want to delete any object under Data Insight project in Information Steward workspace, first you need to delete the dependent objects (child objects) then only parent object is allowed to delete. But if you want to delete the entire project, you can delete it from CMC, it wont ask you to delete the dependent objects one by one.
If you delete Project from CMC, that will delete entire project from repository, you try once again, it will work, make sure you must be Data Insight Administrator.
Thanks,
Ramakrishna Kamurthy

Similar Messages

  • Delete an entire project in Premiere Pro CS5.5

    HI: How can I delete an entire project in PP CS5.5. I'm worried about deleting because I have a bunch of projects saved and I'm not sure how they are saved and if they are scattered all over the HDD's. I don't want to delete something that I'm using. I use a designated drive and make folders for each project but it has gotten a bit out of hand and I might not have been as dedicated as I should have been as far as organization. It seems that some of these files go to the C drive in Adobe folder and I never use that but something does. Can anyone tell me how Adobe stores all this stuff and how to know what files are with what projects. I would gladly read about it if I could get pointed in the right direction. A preThanks to all who respond. Spark

    Settings for scratch disks are set in the Project Settings/Scratch Disks and all the available other settings are in the Edit/Preferences/Media options. Cleaning the Media Cache can help in cleaning up and is not destructive. Everything that is needed will be recreated when PR needs it. It will show up as indexing, conforming and creating PEK files.
    Changing specific directories like C:\Users\<user name>\AppData\Roaming\Premiere Pro\5.5 and C:\Users\<user name>\AppData\Local\Adobe\Premiere Pro\5.5 are generally not advised, specially not for the faint of heart.

  • How Can I Safely Delete a RoboHelp 9 Project?

    I am learning/evaluating RoboHelp 9 using IconLogic's "Essentials of Adobe RoboHelp 9 HTML".  This book  has excellent step-by-step lessons and contains student data files to make it easier to learn.  The student lessons were downloaded and unzipped into a folder called "RoboHelp9Data".  Beneath this folder is a folder named "RoboHelpProjects".  (Note there is no space in the folder name.)  At some point, I inadvertently created a folder called "RoboHelp Projects".  (Note the space in the folder name.)  As lessons progressed, I learned (1.) it is best not to have pathnames with spaces as this can cause problems on some operating systems; and (2.) you should not delete any RoboHelp files via Windows Explorer.  Rather, you should always delete them from within the RoboHelp application itself.  (Let it be duly noted that the admonition in Item 2 came with no instructions on how to do that which it admonished!)
    Because I now have two folders with similar names ("RoboHelpProjects" and RoboHelp Projects"), it is causing me problems.  At first glance, it seems the simplest solution would be to remove and recreate the entire root folder, "RoboHelp9Data " via Windows Explorer.  (I don't care about losing project data---I actually want to start over.)  The thing that stops me from doing this is the admonition in item 2 above.  So would RoboHelp still be unhappy if I were to remove the entire root project folder and everything it it (via Windows Explorer).  It seems logical to me that if all traces of all project files were to disappear (including the files that contain references to the project), RoboHelp would not have anything to complain about!  (I guess that all depends upon where and how the RoboHelp application stores data about each project, and sadly, I am ignorant of that knowledge.)
    As I am unwilling to stand accused by the RoboHelp application of high crimes against project data, I decided to play it safe and delete my projects from within RoboHelp and then recreate them.  It sounds reasonable, does it not?  One would think that finding out how to delete a project from within RoboHelp would be simple enough.  However, one would be wrong.
    I have tried the obvious:  (1.) Searched the index and TOC of my book for info on deleting a project---no help there; (2.)  Looked for a "delete project" option in the Manager Pod "File" menu (also tried the right-click options)---no help there; and (3.) I searched the web and Adobe forums for "Delete RoboHelp 9 Project" with no success.  I did find an article about removing unused project files (Tools > Reports > Unused Files), but nothing about deleting an entire project.
    As a new RoboHelp user, what I need are some simple step-by-step instructions on how to safely delete a RoboHelp 9 project from within RoboHelp.  This seems like it should be a short, simple, straightforward answer that is easy to find on the Web.  What am I missing?

    Kevin is suggesting that you store the projects you create while working through his book in a folder called RoboHelpProjects. It is not where you have to store every project you ever create.That is for the purposes of his book.
    RoboHelp initially defaults to My RoboHelp Projects but it's up to you whether you do. Generally on the forums we advise against that as  it is part of your profile and can result in excessively long path names in a few cases. Generally where authors create file names that are so long they almost serve as the content.
    Projects always have a root folder, call them Project 1 and Project 2 for this purpose. You can have those folders directly off your C drive (or other local partition) or within in a parent folder as above.
    Now to what you can and cannot do. You can delete a whole project by selecting Project 1 or Project 2 in Windows Explorer. Obviously if you delete the parent folder you will delete all your projects within.
    What you must not do is delete individual files within a project using Windows Explorer, for that you use RoboHelp's Project Manager. The exception is if you go to Tools > Reports there is a report Unused Files. Files listed there will have to be deleted using Windows Explorer for the very good reason they do not appear in Project Manager and, therefore, cannot be deleted that way.
    If you think about it, it is similar to Word. There is no option to delete a document there other than using File > Open and right clicking. Not very intuitive.
    See www.grainge.org for RoboHelp and Authoring tips
    @petergrainge

  • Another '911 Entire Movie Project Trashed'

    My daughter had a major video project that just vanished tonight. When she goes to open the project the message ""A Project File is Missing
    The file “_” couldn’t be opened and is being skipped. Click “Ignore All” to skip any remaining missing file messages."
    I read the other thread on here and tried the following:
    "I think you can retrieve your movie...or at least most of it; from your last save. Follow these steps:
    Close your iMovie project.
    Controld-click on its icon and select 'Show Package Contents'
    Look for an icon with your movie's name.
    See if there is another one with the name and a ~ after it. That is the prior, next-to-last saved version of your iMovie.
    Double click on it, and you should see it open in iMovie. Check to see that it is what you want.
    Do a 'Save Project As' (and rename it) so it will become its own iMovie, not remain part of the project file of the other one. Specify where you want this new iMovie to be stored. iMovie will copy this file to the new iMovie."
    I found the the other file with the name and ~ after it. When I double click on it, I get the same message that I got originally. Does this mean the entire project is corrupted? Any other suggestions?

    If all else fails: In the Package Contents folder there should be a Cache folder inside of which there is a file called Timeline Movie.mov. Click on that and see if it will open with your entire movie project intact. If it opens successfully, control click on the Timeline Movie icon and make a duplicate. Drag the duplicate onto your desk top, and from there you can drag it into a new iMovie project. It will be just one long clip, but at least you have your movie. You can split the clip into multiple clips for editing purposes.
    Parenthetically, I would make sure you have enough free disk space on your start up disk for iMovie to operate properly. 20-25 GB is frequently recommended on this forum. Also, you might consider deleting preferences and doing a permissions repair. Post back if you don't know how to do that.

  • When I try to delete a clip, iMovie deletes the entire soundtrack!

    I am again trying to edit a library program which we filmed. I'm using our "old" macbook running Mavericks and iMovie 9. This is what happened.
    Our presenters had a Powerpoint presentation which they wanted us to integrate into the film. I saved it two ways: as a quicktime movie and as a group of photos in iPhoto. Then I began editing the film as usual. When I got to the Powerpoint presentation, I detached the audio from the film, split the clip, and deleted small segments. I then replaced those segments of film with the photos, which I treated as clips and made the same length as the clips I'd deleted.
    It's fiddly work, but it was going well, and I had inserted 50 images when something strange happened. I was preparing to add another one, and split the clip, saved, and deleted as usual. This time, I found that, in addition to a 6.6 second clip, iMovie had deleted the entire soundtrack of the presentation! I can't understand why this is suddenly happening, after doing hours of work with no problem, and I can't understand how to stop it. It's maddening!
    What I did: checked the disk and repaired permissions, twice. I also went to terminal and ran the daily, weekly, and monthly scripts. Nothing helped. It's still happening.
    The macbook is a 2 GHZ Intel core duo with 2 gigs of ram. I have 26 gigs free on the hard drive.
    Can anyone help me? I really need to get this film done, and I have more than 60 images to go!
    Mary

    "how can I see these green lines to find out where the audio is attached?"   In the project timeline as shown in my screen shot in my last post - but as you will see below you don't have to worry about this.
    Replacing a clip will avoid deleting any attached audio and ensure that the replacement clip has exactly the same duration, avoiding the sync problem.
    However there is a still easier way.  Don't split the video at all but simply place the Powerpoint slide stills above the video wherever you want them.  They will replace the video below (cutaway clip).  Now you can move and adjust the duration of the stills without any risk of loosing audio synchronisation.
    More details at: http://help.apple.com/imovie/mac/10.0.8/#/movf525350f0
    Geoff.

  • Is there a way to copy & past an entire FCE project to external dr

    Is there a way to copy & paste an entire FCE project to an external drive so that I can delete the project on my hard drive and begin another project?

    You need to keep the following:
    Your *FCE project file* (normally located in your Final Cut Express Documents folder)
    Your *captured clips* (normally located in your Final Cut Express Documents / Capture Scratch folder)
    Any other *source media files* - photos, sound files, etc. - that you used in your project.
    You can copy the files to any folder you wish to copy them to.
    There is no need to keep any of the render files. You can always rerender your project as long as you have your FCE project file and the source clips & other source media that you used in the project.

  • How would I replace just the (imported) movie portion without having to start over the entire iDVD project from scratch?

    I've just added a new ending and want to burn the new version of my iDVD project.  How would I replace just the (imported FCE) movie portion without having to start over the entire iDVD project from scratch?

    In an attempt to help clarify:
    The FCE 3.5 project I first wrote about had 10 chapters and was a mix of stills and transcoded DSLR video clips that measured 58 min in length. After FCE converted it to a Quicktime movie, it exported from FCE to iDVD 7 flawlessly until I was asked to make a last minute change.
    My older software wasn't endowed with the ability to "detect modifications".  However, Deleting Assets was successful and a revised version of the original video could substituted saving me from starting iDVD over from scratch (thanks to Old Toad).  Luckily, the ugly iDVD BUG did not awaken during these procedures.  Thanks Bengt W.
    I hope this helps the discussion.

  • Hi Apple Team, I would like to change the iCloud account on my iPhone, however it says I must 'delete the account' before doing so? Does this mean that I delete the entire existing account, or just delete it from my phone specifically?

    Hi Apple Team, I would like to change the iCloud account on my iPhone, however it says I must 'delete the account' before doing so? Does this mean that I delete the entire existing account, or just delete it from my phone specifically?

    From the iPhone only.

  • How do I delete stored email addresses in my iphone? When sending photos, I don't want to have certain email addresses  "popping up" from the internal memory, I've deleted my entire "Contact" list but they still appear.  Help please!

    How do I delete stored email addresses in my iphone? When sending photos, I don't want to have certain email addresses  "popping up" from the internal memory, I've deleted my entire "Contact" list but they still appear.  Help please!

    As with the Mail app on a Mac, the iPhone's Mail app stores all email recipients in a list of previous recipients which is separate from the address book or contacts. The email address autofill feature when addressing an message pulls from Contacts and from the list of previous recipients.
    Different from the Mail app on a Mac, there is no access to the list of previous recipients with iOS on an iPhone, iPod Touch, or iPad to remove a previous recipient from the list, or to add a previous recipient to the address book or contacts that is not already entered - not at the present time anyway.
    The only way to purge the list of previous recipients at the present time is by restoring your iPhone with iTunes as a new iPhone or not from your iPhone's backup, which will start being re-populated again with every sent message.

  • I need to delete the entire browsing history so when i type in a webpage it soes not bring up previuosly visited sites.  deleting the history does not do this.  any one know how to do this

    I need to delete the entire browsing history so when i type in a webpage it soes not bring up previuosly visited sites.  deleting the history does not do this.  any one know how to do this

    Judy-
    If Private Browsing doesn't do it, try Settings-Safari-Advanced-Website Data-Remove All Websitre Data.
    Or changing Settings-Safari-Autofill to OFF.
    You might also try Settings-Safari and Clear History and Clear Cookies and Data.
    As you can see, there are several controls for Safari.  Which one works depends on what your problem is.
    Fred

  • How do I delete my entire reading list in safari from iphone 5?

    Is there a way to delete the entire reading list in safari?  Theres too many to have to go through each item and delete them manually

    Can't be done on the phone with deleting them individually.  You can however download the free app My Contacts Backup.  Open this app, tap the preferences (gear) icon on the bottom right, in the screen that opens scroll to the bottom and tap Remove all contacts.

  • How do I delete my entire iCloud account?

    How do I delete my entire iCloud account?

    You can't delete an icloud account.  You can disconnect a device or computer from icloud.  (For example, on an iOS device, go to Settings>icloud, scroll to bottom of screen and tap Delete Account.)
    If you want to delete all the data on icloud, then there are several ways, but these require that you delete stuff one at a time or a group at a time.  Usually, using a computer is faster, since you can for example check multiple emails at once then delete them.
    To delete specific data files associated with a program or app, you'll have to invoke each app and delete the data.

  • Hi, I have a new cell phone, I wanted to give my iphone to my father, instead of deleting the content on the iphone I have deleted the entire iphone. It starts up no more. iTunes will not recognize the iphone. How do I get my old data back onto the phone?

    Hi, I have a new cell phone, I wanted to give my iphone to my father, instead of deleting the content on the iphone I have deleted the entire iphone. It starts up no more. iTunes will not recognize the iphone. How do I get my old data back onto the phone?

    Place the device in DFU mode (google it) and restore as new.

  • I turned off icloud on my calendar and it deleted my entire calendar.  Is there a way of getting that back?

    I turned off icloud on my calendar and it deleted my entire calendar. I did this because I wanted to add a sport site to auto add my daughters hockey schedule.  For some reason it was not accepting this URL?   Is there a way of getting my calendar back?

    Perfect, that worked.  But I still cannot get this certain URL to work.  It gives me an error message 1.  Any ideas on that?

  • HELP!  Is there a way to change column information in iTunes such as name of artist, genre etc, other than deleting them one at a time? Such as the way you delete an entire group of songs by holding down control keys or selecting the Select All command.

    HELP!  Is there a way to change column information in iTunes such as name of artist, genre etc, other than deleting them one at a time? Such as the way you delete an entire group of songs by holding down control keys or selecting the Select All command. Thanks.

    If you select all the songs you want to change, Be it one song or an akbum, or an Artist, Or Genre, or playlist. Then Right mouse click  and Get Info. You then get a slightly different from normal Get Info box as this is the One for Multiple items.
    In there have a look at the tags and see if the one you want to changes is in there. There are a few tabs so if for example you wanted to change the Media Type from Home Movie to Movie go to the Options tab and select Movie and OK and it will change the whole selection.

Maybe you are looking for