Deleting assets in the flowchart

As an inexperienced user of Premiere CS3 I am having trouble with the flowchart function and associated help documentation. After creating several links, I find that I need to remove some of them. There seems to be no reference anywhere as to how to do that. I have selected an asset in the flowchart and pressed delete - to no avail. The undo option under EDIT works only on the last applied change. I have also gone through the video tutorial and it is silent on deleting one or more links no longer wanted. Also, how do you delete an asset at the bottom of the flowchart, sometimes referred to as "orphanage"? Any help would be appreciated.

When using the Flowchart, you should also use the Properties panel. To "delete" a link, select the object that has the link, then look in the Properties panel, and choose "Delete" in the Link field.
The orphanage contains objects (timelines, slideshows, playlists, and menus) that are not linked in the project. The only ways to "clear" the orphanage are to either link to those objects in your project, or delete them from the Project panel.

Similar Messages

  • Deletion of Assets in the PO line item

    Hi Gurus,
    We have a PO containing 7 different assets.  The assets were GRd and invoice was also entered in MIRO last November.
    Start of depreciation for these assets were also done last November 2011.  However, some problem were encountered with the vendor which will require one of the seven assets to be deleted in the PO. The asset to be deleted is valued at 67,500.00 and it's net book value at the end of 2011 is 66,725.00.
    When we tried to reverse the GR Reversal, an error was encountered saying that Line item causes scrap value of 1.00 to be violated.
    Thanks,
    Ellicec

    Hi,
    I dont think so that you can directly reverse the asset GRN without reversing the concerned MIRO document.
    Rather you can retire the same asset as on GRN date only, since here you dont need to reverse documents anymore.
    Else, please check your scrap value settings for your company code in OAAW & OAYI.
    Regards,
    Srinu

  • How to delete asset in Oracle R12 in a status "posted"

    Hi all,
    We upload about a lot(about 10 000) assets from mass addition template and run post mass addition. All the assets are all in the status "posted" and we just realized that we uploaded in the wrong period.
    How can we delete all those assets.Please help with the steps.
    Thanks

    hello
    please read the full document here:
    Fixed Assets Mass Additions White Paper [ID 111097.1]
    Delete Mass Additions is part of the “Clean Up” process that is supplied by
    Oracle Assets. When reviewing your mass additions lines, you can place
    lines that should not become assets in the DELETE queue. The Delete
    Mass Additions program will take the following mass additions and place
    them in the interim table FA_DELETED_MASS_ADDITIONS and delete
    them from the FA_MASS_ADDITIONS table.
    · Mass additions in the SPLIT queue for which you have already posted
    the child mass addition lines created by the split.
    · Mass additions in the POSTED queue that have already become assets.
    · Mass additions in the DELETE queue.
    i'll be grateful if inform me about the results.
    bests

  • Function Module for blocking, unblocking and deleting assets

    Hi,
    Are there function modules available for blocking,unblocking and deleting assets in SAP.
    Can I user 'BAPI_FIXEDASSET_CHANGE' for the same?
    Thanks in adavnce,
    Laxman

    Hey,
    I tried by putting the values of company code,asset number,subnumber, transaction type as 'A' and passing the value of INLA-XSPEB as 'X' in FM ASSET_MASTERRECORD_MAINTENANCE to block the asset but it is not working. I am trying many other things. Can you suggest what are the mandatory fields that need to be passed for the asset to be blocked.
    As there are lot of parameters in this FM, I am little confused. Is there a proper documentation available somewhere to understand the flow.
    Thanks in advance for the help.
    Laxman Pai.

  • How to delete assets in MUSE especially photos in slideshow - keeps making a copy on preview this

    How to delete assets in MUSE especially photos in slideshow - keeps making a copy onevery  preview this is so wrong - really worried this profgram sucks

    thumbnails can be deleted in the MUSE S/Show window - this seems to delete all instances of photo in the slideshow. However the slideshow widget needs improvment keep submitting to Adobe request for features and included a pause button!! 
    The Layers Tab did not work for me?

  • Records of Deleted Assets

    Hi,
    We have deleted some assets in AS06.  Where can I view records of these deleted assets?  A listing would be preferred, if not, does anybody knows the table name?
    Thanks!

    Hi,
    no. When you delete an asset you confirm this by choosing the radio-button "physically delete asset" in AS06. What would be the sense to keep the asset in the data storage if you choose to delete it?
    If you wanna keep the info, you can retire the asset or set a deactivation date into the master record manually. Then the asset is kept and not deleted.
    You cannot conculde that missing asset numbers are the (AS06-) deleted assets in case you use the standard archiving functions. Archiving also (under given prerequisites) deletes assets from database after they are transfered to the archive.
    Regards,
    Markus

  • Deleting assets from one CCN

    Hi,
    I have created thru CATT script assets under various asset classes ( we follow a sequence)
    The first asset (say 84200000-0) carries value in it and i retired it .
    and trying to delete it either through AS06 or thruough program RATSTDEL.But i am unsuccessful in deleting it. Any clues will be of great use
    thanks

    Hi,
    you can only delete assets when company code is not productive
    (T001-XPROD = 'X' and T093-xanueb = 0)
    than you can use tcode OABL
    A.

  • Unexpected Result: Deleting asset file did not affect Encore

    I am using Encore DVD 2.0. I deleted the DV AVI file, the asset for the timeline, from the folder of orgin. I did not remove the DV AVI asset from the Encore project. When I opened the Encore project, I expect the DV AVI file to have either a "broken link" or be disabled or say "file not found." But when I opened the Encore project, the project Preview played just fine as if the DV AVI file had not been deleted from the folder of orgin. Why is this?
    This confused me for the following reason.....when I import an asset into an Adobe Premiere Pro project then delete the actual asset file, Adobe Premiere Pro will let me know that the file cannot be found, etc.
    Thanks for any input,
    Angela

    I did a Burn DVD Disc with encore on a project where the untranscoded original asset file had been deleted. The DVD played just fine. I'm going to do some further comparison testing, and will let you know more.
    -Angela

  • Deleting Asset with Depreciation Posting

    Hello,
    My user has created the asset in the incorrect asset class, but this asset has already being depreciated last period and I can't use the AS06 transaction to delete it.
    How do I delete this asset to create the new one in the correct class?
    Regards
    Barbara

    You transfer the asset from one asset class to another -- using intracompany transfer ABUMN.

  • How to see Deleted Asset Records

    Hi,
    From where we can see the deleted Asset Records means on which date asset has been deleted.
    Regards..

    Hi,
    Procedure to see the deleted asset records:-
    Fixed Assets >Information System >Reports on Asset Accounting >Asset Balances >Balance Lists >Asset Balances >S_ALR_87011964
    Go to Dynamic Selection >Administrative Data and select Mark for Deletion. Give input criteria as X and run the report.
    Thanks,
    Panneer

  • How to delete assets in OER

    Hello ,
    I would appreciate if someone can reply for how can i delete assets in OER?
    thanks,
    Bhuvi

    Hi user10660374 ,
    Thanks for your reply and i got to find out how to delete it. But , when i go back to OER home page and search for that deleted artefact it returns result with those names again. But, when i try to download it says, this file is no more available.
    I would like the user of OER to know straight away at search level rather than taking them till downloading file to know that file is deleted.
    Is this cache problem and will refresh after 24 hrs?.
    Regards,
    bhuvi

  • Delete Asset Master

    If we delete an asset records, is all asset information removed from the SAP tables and can we reuse the asset number
    Please let me know ANLA table will have this Info.
    Regards
    Chaitu

    The only way to delete assets with values are when they complete deactived (No values on the asset) is using archiving.
    When you are in a develop/ test system there is an option to delete (reset)  all the asset for a company but never do this in a production system. It delete only the assets and not the postings!

  • Can you substitute a asset of the same name but a different track length?

    Hi,
    Does DVDSP allow you to substitute an asset (which has chapter markers and is all linked up)with an asset which is identical apart from length and marker placement. In other words, it will have the same name, same number of markers, markers named the same, etc. The only difference will be where the markers appear in the track, and the track will be a different length?
    Is this possible and if so, how? I have tried to do it, by moving the first asset to a new location on the Mac and then going in to the project and attempting to relink the asset to the new file. However, it comes up with the message that the file I am trying to relink it to has different attributes! Can this be done?
    Help much needed and appreciated.
    Thxs
    Ben
    G5 Dual   Mac OS X (10.3.9)   FCP4, DVDSP2

    I understand that you don't want to redo all the linking with the markers. You can try following (make a copy of your project first to be safe) :
    - close your project and quit DVDSP
    - move your old asset, and replace it with the new one
    - reopen your project
    A warning message should tell you that this asset has changed, but your marker will remain at old position. If the asset length are not the same, old length information will be used by DVDSP. To correct this, delete the asset from the timeline, and drop it back to the timeline.
    Now you just have to move the marker to the right position.

  • Urgent!!! Attaching an Asset to the Task

    Hello
    We have created the Project and the task using the API
    We would like to know is there any API which will help us to attach an Asset to the Task
    Please let me know
    thanks
    Regards
    Ramesh Kumar S

    You should be able to create a pre-process event handler on the User object for action Delete.
    -Kevin

  • Deleting Assets in use

    A lot of times I will start a new project (that may be based on a previous project) and simply "save as" the old one and modify it. Sometimes this leaves you with dropping in new backgrounds and some backgrounds are still in the asset list as "used". Wouldn't be a problem other than on certain DVD players I've actually seen pulll up the old background that should have been replaced. So how can you delete a background (or asset) in use?
    mark

    One way i've found is to rename or remove the asset in the Finder, then when DVDSP is run it asks you to re-link, continue on and now you can remove the asset from the asset window.

Maybe you are looking for