Deleting Available lookup records...

Hi Guru's ,
We have created Qualified Look up table and some one has added some rubbish data and its in Available lookup record ..
Does anybody know how can i delete this records ..as they are not needed..
Double click on Qualified lookup and on left hand side we have Available lookup records..
Regards
Vikrant M Kelkar

Hi Vikrant,
From the tables drop down list select the Qualified table from which you want to delete the records. There you will see the records present in the Qualified field.
Regards,
Jitesh Talreja

Similar Messages

How to delete the material records related to storage type

Dear SAP guru's,
I got a situation that if the material "XXXXXX" exists in two different storage type (let say 001 & 002 ) and the material needs to be removed out of one (Let say 002) to avoid the picking and putaway in future.
Inorder to accomplish an above requirement we tried the below cases
Case 1: By flagged the material "XXXXXX" under storage type 002 in MM06 transaction.But it didn't restrict the system on allocating and removing the stock from /to to the storage type 002.
Case 2:After we flagged the material for deletion under storage type 002 ,we used to MM71 transaction to archive & delete the material record that assocaited with the storage type 002 completely.
I am kind of queiries to know if there is any other method or procedure available to delete the storage type associated material records in SAP.
Please guide me with the other options.Thanks.
Regards,
John.

Hi John,
Its very simple, remove the Storage type indicators from the material master - Warehouse View 1 at Stock placement & Stock removal section, with this it won't pickup or place the materials in the concerned storage type.
If you have extended this materials to more than 1 storage type, you need to do the same for all the storage types.
Reward if it is helpful.

How to delete the single record from the ODS

HI,
I want to DELETE the particular record from ODS.. how to delete that..
plz give me the solution.. it's urgent..
with regards
@jay

Hi Prakash,
You can delete a particular record from ODS by specifying the key field name in Selective deletion button available in Contents tab in the manage screen of ODS. But it will only delete the record from the active data table and not from the Change log and new data table . You should be very carefull if you are doing in Production system as there is chance of deleting other records accidentally.
Go to Selective deletion button - > Click on delete selection -> Enter the key field values of the record you want to delete-> Press save button to save as Variant -> Go back and click on selection button -> Chosse the background job type -> Click on start button.
Regards,
Prakash

MASS DELETION OF MATERIAL RECORDS

hi frds,
is is possible to delete all the material records at single trial (mass deletion of material records).is that any t-code for this.
is any other way to do this.please advice in this regard.
your advice is consisdered valuable.
regards,
G.V.SHIVAKKUMAR

No, there is nothing that can do that.
I know there is a transaction that is able to delete all FI data, but no such transaction available for MM.

Mass delete of condition records

Hi All,
Please advise if there is a mass delete function of condition records. I have uploaded prices for customer/material conbination for the month of novemver and i want to delete them all. I can do it one by one but it will take tooooo long. Also please advise that if a record is marked for delete indicator, then can it be used again ? or can i reomve it completely becasue i want to upload again with correct prices.
Appreciate your help
SAPXPT

Hi,
Let's get one by one.
> Please advise if there is a mass delete function of condition records. I have uploaded prices for customer/material conbination for the month of novemver and i want to delete them all. I can do it one by one but it will take tooooo long.
There is no such Transaction available to delete those like in MASS.
Best thing is to use a LSMW with VK12 transaction.
> Also please advise that if a record is marked for delete indicator, then can it be used again ?
Yes, You can.
Once marked for deletion they won't appear in the sales order automatically. Pricing Analysis will show you like this.
"Condition record has been deleted"
If you want to use it again go to VK12, and go in to your condition record.
Highlight the condition line item and press "Details" button (Magnifying Glass)
Un-tick the "Deletion lndicator" check box.
Save.
Then you can use it again as normal way.
> can i reomve it completely becasue i want to upload again with correct prices.
Yes, You can.
You can remove it completely from the data base. First you have to configuret your condition type in IMG to enable that function..
Go to V/06
Select you condition record & go in to details.
There you get a filed called "delete fr. DB" under "Master data" section.
Change it to "A with popup" or "B without popup".
Which means your going to delete it from the data base. (Where as you cannot use it again, like you do in Deletion indicator)
Save
Then come to VK12,
Go in to your condition record.
Highlight the condition line item and press Delete button from lower area.
If you set "A with pop up" in the condition record, you'll get a pop up saying,
"The condition type XXXX is set so that when the deletion indicator is set, the condition record can be physically deleted from the database.Do you want to delete the condition record physically?"
Once save system will delete it from the data base.
If you set "B without pop up", system will delete it without a pop up.
Hope this helps you !
Best regards,
Anupa

Deleting 20 000 records

Hi
I have to get deleted 20 000 of unwanted records in one of my oracle database. As i monitored , when i going to delete a single record it takes around 2 mins time and also it's gonna be a impact for performance as well since its increasing CPU usage.
Can somebody help me to delete those records by finding a most suitable way ?
Many Thanks
Luke

Presumably, you're storing this multimedia data in a BLOB column (or columns), correct?
No matter how much data you store in a row, it shouldn't take 2 minutes to delete a row.
- How are you identifying the row to delete? Is the WHERE clause in your DELETE statement referencing a key? Or is the DELETE doing a full table scan to find the one row that needs to be deleted?
- Are there any triggers on your table?
- Is this a parent table in a foreign key relationship? Is the parent key unindexed in any of the child tables? If you delete a row from a parent table, Oracle needs to make sure that there is no row in any child table that references the deleted key. If that requires a table scan of a child table, rather than a simple index lookup, that could explain the problem.
As others have requested, a query plan and a trace of the session would help us narrow down whether any of the above options are actually the culprit or if the problem is more obscure than that.
Justin

Batch delete custom obeject records

Hi expert,
we accidently imported hundreds of records into custom object. I undertsand batch delete function does not apply to custom object. Is there any other alterntaive to batch delete these unwanted records? (besides manually delete one by one... :P)
Thanks, sab

hello Bob,
The customer care replied they don't know when this patch will apply to our environment, is there anyway we can push this to be avialble asap?
The oracle customer care's reply is as follows:
1. Web Services Support for Custom Object 3 will be available in the new Patch 931.0.03 Unfortunately we don't have any information regarding the date of deployment for this patch for your environment. 2. An Enhancement Request,3-600732901, has been logged with the Siebel Support Engineers regarding this issue. Please be assured that development and engineering will analyze this request and will take the appropriate action towards implementation if it meets their approval. We appreciate all customer feedback and will work hard to implement as much as we can into our product. However, we are currently unable to provide you an estimated time of implementation while your request is being analyzed and processed. Please review the Training and Support portal for future Release Notes indicating the most current product updates or contact Professional Services for a custom solution.
Thanks, Sab.

Deleting a condition record

hi guys,
i want to delete a condition record using VK12, am selecting the row and pressing the icon 'Delete Row' but its not working out, and the row still remains the same(the condition record not getting deleted). More over, the 'Deletion ID' is selected in the condition record.
how do i delete the condition record in this case. this is very urgent. plz send the replies ASAP.
thanks in advance.
kumar.

Dear Kumar,
There are two possible procedures for deleting conditions. There is either immediate deletion or a deletion flag for archiving at a later date. You enter the type of deletion that should be proposed during condition maintenance into Customizing for a condition type, . When deleting immediately, a dialog box can be created which indicates immediate deletion but offers a deletion flag as an
alternative.
<b>Deletion Flag</b>
You can mark condition records for deletion. These are then no longer taken into consideration during automatic pricing. However they remain as condition records in the system until the next archiving update. This means you can reset a deletion and reactivate a condition record.
<b>Physical Deletion</b>
If you use physical deletion, the condition record disappears immediately. It is no longer available during condition record maintenance or pricing. This deletion cannot be reset once it has been carried out. You have to recreate the condition record if you need it again. To be more exact, the reference to the condition record for pricing and condition record maintenance is deleted completely with physical deletion. The actual condition record must be kept for old documents.
Recommendation:
SAP recommends the physical deletion procedure. The deletion flag improves upwards compatibility in the system.
A pricing error can occur when using hierarchical accesses in combination with the deletion indicator (See the hierarchical access documentation in the SAP library).
The deletion flag used to be used as a replacement for a missing release procedure. This is no longer necessary, as there is now a separate release procedure available (see the release procedure in the SAP library).
Physical deletion can be included using the change documents for example deletions in a specific period (Report RV16ACHD).
Reward points if this is helpful.
Regards,
Naveen.

How do I delete an audio recording in quicktime 10

how do I delete an audio recording in quicktime 10

how do I delete an audio recording in quicktime 10
Close the QT X player without saving the recording. If you have already saved the recording, then locate the saved file and trash it in the normal manner. If you are referring to a temporary or saved file entry that shows up in the "Open Recent" list, the system will automatically reclaim the space as part of the routine system clean up if/when the file is no longer available. If you simply wish to immediately remove it from your "Open Recent" list before the system removes it, then use the "Clear Menu" option to manually clear the "Open Recent" list.

How to delete the double records connected to one or more than one tables in SQL 2008?

Hi
Can anyone please help me with the SQL query. I Im having a table called People with columns names: personno., lastname, firstname and so on. The personno. is having duplicate records,so all the duplicate records i have written with "double" in
the beginning of the numbers. I tried deleting these double records but they are linked to one or more than one tables. I have to find out, all the tables blocking the deleting of double person. And then create select statements which creates update statements
in order to replace the current id of double person with substitute id. (The personno. is in the form of id's in the database)
Thanks

You should not append "double" in the personno. When we append it will not be able to join or relate to other table. Keep the id as it is and use another field(STATUS) to mark as duplicate. Also we will require another field(PRIMARYID) against
those duplicate rows i.e the main or the primary personno.
SELECT * FROM OtherTable a INNER JOIN
(SELECT personno, status, primaryid FROM PEOPLE WHERE status = 'Duplicate') b
ON a.personno = b.personno
UPDATE OtherTable SET personno = b.primaryid
FROM OtherTable a INNER JOIN
(SELECT personno, status, primaryid FROM PEOPLE WHERE status = 'Duplicate') b
ON a.personno = b.personno
NOTE: Please take backup before applying the query. This is not tested.
Regards, RSingh

How to Delete the condition record in CRM

HI,
Can you please help me how to delete the condition record from condition table in CRM.
Please explain the usage of FM CRMXIF_CONDITION_SEL_DELETE with examples.
I have also read the documention of the function module. How to use this FM for custom defined condition table.
(this is the code given in Documentation)
DATA-OBJECT_REPRESENTATION         = 'E'
DATA-SEL_OPT-CT_APPLICATION              = 'CRM'
DATA-SEL_OPT-OBJECT_TASK                    = 'D'
DATA-SEL_OPT-RANGE-FIELDNAME        = 'PRODUCT_ID'
DATA-SEL_OPT-RANGE-R_SIGN                  = 'I'    (Including)
DATA-SEL_OPT-RANGE-R_OPTION           = 'EQ'
DATA-SEL_OPT-RANGE-R_VALUE_LOW = 'PROD_1'
Thanks
Shankar

Hi Shankar,
I am using the same CRMXIF_CONDITION_SEL_DELETE function module to delete condition record present in CRM.
But it is giving me below error in the return table of the FM after i run the program. Can you please correct me if I am doing any thing wrong?
Error in lt_return: SMW3     CND_MAST_SEL_DEL_EXT_VALIDATE     CND_M_SD
code:
ls_range-fieldname = 'PRODUCT_ID''.
ls_range-R_SIGN = 'I'.
ls_range-R_OPTION = 'EQ'.
ls_range-R_VALUE_LOW = '123456'.
APPEND ls_range TO lt_range.
MOVE lt_range TO ls_entry-SEL_OPT-range.
ls_data-SEL_OPT-object_task = 'D'.
ls_data-SEL_OPT-ct_application = 'CRM'.
ls_data-object_representation = 'E'.
CALL FUNCTION 'CRMXIF_CONDITION_SEL_DELETE'
EXPORTING
    DATA          = ls_date
IMPORTING
   RETURN        = lt_return
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
IMPORTING
    return = lt_ret.
Edited by: Saravanaprasad Nadar on Jul 7, 2010 1:27 AM

Error while deleting a Lookup Taxonomy field

Hi Experts,
I have created a main table Products and there is a field Manufacturer which is a Lookup Taxonomy field. When I try to delete the field there comes an error stating 'The field cannot be deleted until references to it in Family Hierarchy are removed'. But in data manager there exists no data for that table. Even in the other mode I have checked whether there exists any relationships. There seems to be nothing, still I can't able to delete that field. Please help!!!
Thanks in Advance,
Thamizharasi N

Hi Thamizharasi,
I feel you have defined a Family table in your repository. This family table is referring to this taxonomy field. To resolve this, try below steps:
1. Open MDM Console and login to the repository.
2. Once connected to the repository, click on the repository name, Search for the "Families" table in the Tables Sub-window on right hand side, and check the family field.
3. If the family field is manufacturer Lookup taxonomy field, then delete the family table.
4. Delete the lookup taxonomy field from the main table.
Hope this will solve your issue. Revert with the result..
- Shiv

APP-PAY-07201 Cannot perform a delete when child record exists in future

I am trying to put end date to a payment method of any employee in HR/Payroll 11.5.10.2
but receiving the following error message:
APP-PAY-07201 Cannot perform a delete when child record exists in future
Can u advise what steps I should follow to resolve this issue.
Regards /Ali

This note is related to termination of employee while our employee is on payroll and just want to change is payment method. But in the presence of existing payment method we cannot attched another becuase we are receiving an error:
APP-PAY-07041: Priority must be unique within an orgainzational payment method

How to delete the duplicated records, not just surpress the records?

I am new to CR. Right now I am doing a project which needs CR get query from Oracle. I got the query from Oracle. There are records with duplicated fields. For example (the following only show part of fields):
ID    body_code
1            10
2             10
3             15
4              15
5              15
6              16
I need to only select records (not surpress, because I will do some caluculate later) like following:
ID         body_code
1             10
2              15
3               16
I tried to creat selection fomula in fomula workshop, shown as follows:
onlastrecord;
<>next
but CR said next can be evaluated. I think it must have something to do with the print-time. So what show I do to delete the duplicated records.Thank you very much.

Ting,
Try this:
Insert a group on body_code. Then create a running total called Distinct Count. Field to summarize -> ID, Evaluate on change of group Group # 1 Body Code, and Never Reset.
Then insert a chart in the report header:
In the advanced layout, select body_code on change of and select Distinct Count running total in the Show values.
I hope I understood what you're looking to accomplish.
Z

How to delete the duplicate records in a table without promary key

I have a table that contains around 1 million records and there is no promary key or auto number coulums. I need to delete the duplicate records from this table. what is the simple effective way to do this.

Please see this link:
Remove duplicate records ...
sqldevelop.wordpress.com

Deleting Available lookup records...

Similar Messages

Maybe you are looking for