Deleting BDOC Errors

Hi experts ,
Please tell me how to delete BDOC error in CRM .
My Error is Technical Error and BDOC type is BUPA_REL.
Please mail me urgent.
Thanks,
Swapna

hi swapna, 
     ur prob is solved or not? i am having same prob. but for BUPA_MAIN, do u have any idea....

Similar Messages

  • Is it possible to delete Bdoc error message

    Dear All ,
    I want delete all my previous bdoc error messages from the log
    I would like to know the possibility of deletion of Bdoc error messages from SMW01
    Regards,
    Silpa.

    Hi Silpa,
       BDOC messages will be stored in the table SMW3_BDOC6 and SMW3_BDOC4. These entries will be deleted from your system at the time of middleware reorganization job execution(Report SMO6_REORG2).
       I hope you scheduled the Middleware reorganization using report SMO6_REORG2.
    //Bhanu

  • Bdoc error "B partner with GUID B................ does not exist"

    Hi Guru,
    basically here I experienced this Bdoc error due to the fact that R/3 people took the decision to delete Master client data from R/3 tables, and afterward to reload Master clients data via legacy.
    Some manual entries were already created in CRM, manually.
    So during the performance of download from R/3 only the clients not already created were "re-created", sucessfully.
    On the other hand for others already created in CRM with old Guids, the "re-download" with the new description, data, failed.
    BDOCs produced this error:
    "Business partner with GUID B............. does not exist" or "Business partner 1... already exists".
    Basically I thought that partner Guid was not the same to R/3 so I deleted the entry from But000, and I tried to reprocessed the BDOc. It did not work.
    I check the Guid entries in R/3 table CRMKUNNR and CRM table CRMM_BUT_CUSTNO. In these tables there the same entries.
    Think that some inconsistencies are due to the deletion of master client in R/3,  and next reloading via Legacy in R/3.
    The question is: Which tables should I revise in order to add the right Bp GUID? How can I solve this unexpected issue? By launching a program?
    I 'll reward with points if solution proposed can work.
    Many thanks in advance.
    Andrea

    Hi,
    basically this is another issue.
    A list of Bdoc can be provided easily from administration control R3AS, where you use matchcode to find the bdoc list.
    Regards,
    Andrea

  • Delete BDoc in SMW01

    Dear SAP gurus,
    Is it advisable to delete the error BDocs in SMW01? There is one case where when i deleted one of the error BDocs in SMW01, the changes that were made, were reverted. What should be the best way to do if i would like to clear off all the error BDocs in SMW01. Those errors can be ommitted, but we do not want to see them in SMW01. Please advice. Points will be rewarded.
    Thanks

    Hi,
    u2022Reprocess failed BDocs
    CRM 4.0: Choose BDoc Message >Process > Reprocess
    CRM 3.0/3.1: Choose BDoc Message >Process > Retry to reprocess
    Note: Do not reprocess the BDoc messages without checking for the possibility of overlapping effects, overwriting actual data! If newer BDoc messages for the same application object exist and have been fully processed, reprocessing an older BDoc message may cause the current data to be overwritten by a BDoc containing data from an older state.
    u2022Delete BDoc messages
    CRM 4.0: Choose BDoc Message > Process > delete
    CRM 3.0/3.1: Choose BDoc Message > Process > Mark as deleted
    Note: Do not delete BDoc messages without solving the problem! Deleting a BDoc message means that the receiving system(s) will not be updated, thus creating inconsistencies. Only delete BDoc messages when you are sure they are obsolete or can be recreated by sending the application object again.
    Regards
    Srinu

  • BUPA_MAIN BDOC Error 00 55 - Fill in all required entry fields

    Hi All,
    We have CRM 5.2 and i am currenlty having issues with BDOC Error 00 55 from CRM to R3.In our system we have custom code for business partner details changing where we have commit which results in creation of the BDOC.
    When we end time slice the custom identification details the BDOC that is generated has the central_data section which is empty i.e the following fields are coming as blank.
    CENTRAL_DATA->DATA->BP_CONTROL->CATEGORY
    CENTRAL_DATA->DATA->BP_CONTROL-> GROUPING
    CENTRAL_DATA->DATA->BP_CENTRALDATA->PARTNERLANGUAGE
    CENTRAL_DATA->DATA->BP_CENTRALDATA->PARTNERLANGUAGEISO
    CENTRAL_DATA->DATA->BP_PERSON->FIRSTNAME
    CENTRAL_DATA->DATA->BP_PERSON-> LASTNAME.
    The BDOC goes successfully but it deletes the name1 on sd customer. After that if we have any other change to the same bp then that errors out with error message 00 55 i.e. Fill in all required entry fields.
    We have observed that in our custom code there are other places where we call the commit which generates the BDOC and those have central_data section populated with the above mentioned fields and it doesnt delete the name1 on sd customer.
    It would be great if anyone can suggest if they have experienced a similar problem with business partner replication from CRM to R3 and how they resolved the same.
    The thing to note here is that the ISU BP still has the name and is not deleted but name1 deletion only occurs for SD customer.
    Any help is greatly appreciated.
    Thanks,
    Jessica

    Hi Jessica,
           Were you able to fix this issue of fill all required entries error?
         i have a same error with my project too.
      Yes, you know me. We worked in the same project earlier, now i am in this new project, where i get the same old error.
    Thanks
    Keerthi

  • BDoc Error :  Assignment of usage AD_DEFAULT to communication type TEL not

    Hi ,
    I got the below BDoc error with BDoc type : VEND_MAIN
        Error : Assignment of usage AD_DEFAULT to communication type TEL not unique
    Thanks

    We had a similiar issue with pushing vendors from R/3 > SNC.  I took all the entries out of but020 then used those address numbers to get a list of all the values in ADRCOMC.  In ADRCOMC there was a single entry whose HIGH_VALUE was 999 and that was causing the issue.  I went into the BP and manually deleted the Telephone & Email address of the BP then saved it.  I then went back in and re-created the tele & email address for the BP and that fixed he sequence error.
    We have several other BP's that have an usually high consnumber and I'm not sure why.  Most of our BP have a connumber of 001, 002, 003,,, etc, howver there are some that have skipped a lot of numbers and gone straight from 12, 13, 991, 992.  This last example is what happened with our problem BP record.
    After I manually changed the data I was able to process the inbound CIF.
    I hope this helps.
    Will Foster

  • How to delete the error message in Adapter?

    I got one error record stuck in destination JDBC adapter. Is it possible for me to delete the error record?

    Hi Elliot,
    SXMB_ADM
    Integration Engine Configuration
    Specific Configuration
    Category: DELETION
    Parameters: PERSIST_DURATION, PERSIST_DURATION_ERROR
    Subparameters: SYNC, ASYNC
    Change "Current Value".
    and execute your delete job again!
    Regards,
    Udo

  • My iPad2 Apple logo (the blue box with a capital A) was deleted in error. I would like to know how to replace it or get it back.  Thanks so much . . .

    My iPad2 Apple logo (the blue box with a capital A) was deleted in error. I would like to know how to replace it or get it back.  Thanks so much . . .

    Do you mean the App Store app on your iPad ? If you do then it can't be deleted, but you might have hidden it via Settings > General > Restrictions > Installing Apps 'off' - if that is 'off' then turn it back 'on' and the app should show on one of your iPad's home screens again

  • Initial Load of IS-U business partners to CRM - bdoc error

    Hi Gurus,
    i try to do an initial download from R/3 IS-U to CRM. Several objects from customizing have already been downloaded successfully. When downloading the business partners i get a bdoc error message for every single BP saying that
    'business partner role MKK is not available' Number R1206
    I figured out that the business partners in IS-U do have that role 'Contract partner' (which is technical 'MKK') and that data is maintained there. I also checked CRM and figured out that a business partner role 'contract partner' is not available there.
    Should i create it manually?? It is nowhere mentioned that a CRM role 'contract partner' should be created manually. Shouldn't the middleware do that? I found a document on service marketplace called 'IS-U specifics on the setup and load guide for the business partners' where i can read:
    'Sold-to-parties in CRM are replicated as contract partners in the OLTP system and vice versa'
    Does that mean that this mapping of roles is hardcoded? Is it customizeable? Does somenone know where to customize the mapping of business partner roles?
    Thank you
    Edited by: sapgipsy on Mar 19, 2010 4:21 PM
    Edited by: sapgipsy on Mar 19, 2010 4:22 PM

    Looks like as if you haven't activated the IS-U specific FM "COM_BUPA_MWX_BPS_FILL_ISU" in the BP middleware framework where the conversion between the IS-U role "MKK" and the CRM role "CRM000" takes place:
    Check via SM30 table com_bupa_call_fu in the IS-U system if the above FM is activated.
    Regards,
    Alexander

  • Processing BDocs Errors in the background

    Hi,
    I was wondering whether the following is possible.
    We currently have BDocs errors in SMW01 on a regular basis.  This is because our users are opening the BP record in CRM and R/3.  There the BDoc error will have a message saying that the business partner is currently being processed by XXXX.  We can reprocess these BDocs and they are processed successfully.  What we would like to do is process these BUPA_MAIN BDoc errors in the background so we don't need to go into them manually.  I understand the program for transaction SMW01 is RSMW_SHOW_BDOC.  Has anyone ever taken a copy of this program and modified it so that it can process the above BDoc errors automatically in the background?  We are looking into this as our business process allows the user to launch a record in both CRM and R/3.  (Don't ask)
    Anyway if anyone has done anything similar - any tips would be much appreciated. 
    Thanks in advance.
    Regards
    JoJo

    Hi Jojo,
    I have not done anything similar but can point you in right direction.
    You can refer to class cl_smw_mflow which handles the middleware for messaging bdoc's.  You can write a bespoek program from scratch with some selection parameters and process the messaging bdocs by looking at the status of bdoc's. There is a function module 'SMW3_MFLOW_QPROCESSMBDOC' which allows to process the bdoc's by passing the header information.
    You can read the status of bdoc's & other header infromation from table SMW3_BDOC.
    Hope this helps.
    Surendar

  • Bdoc error : Plant IT01 is not assigned to any location

    Hi Experts,
    I have downloaded the Plants from r/3 to CRM [7.0] using object DNL_PLANT through /nr3as. I have checked the entries in /nCRM_LOCMAP, all plants are downloaded to CRM except IT01 & MS01.
    While downloading MATERIAL from r/3 to CRM, i am getting the following bdoc errors
    Plant IT01 is not assigned to any location
    Plant MS01 is not assigned to any location
    Since these do not exists in /nCRM_LOCMAP, i can see that i am getting this error. I have re downloaded DNL_PLANT & checked the status of completion as green. Still these two particular plants are missing.
    Also, when i checked the material [for which i am getting the bdoc error] in r/3, i can see that plants have maintained for that material.
    Is there anyway, to fix the issue?
    Appreciate if someone can suggest a solution on this.
    Thanks & Regards,

    Hi Chandrakant,
    There are no filters set for this object. Also, i took your suggestion, & created a BP with role plant & maintained the details in  /nCRM_LOCMAP. Reprocessed the bdoc's, & i am done, worked finally.
    Thanks a lot for your valueable solution. I have another issue in bdoc error which says " Check-digit in GTIN 00001216000000 (unit of measure KG) is invalid"
    This is the only one i am getting in /nsmw01 & almost in all the bdocs erros. I did search online, but have not got any suitable solution on this.
    Can you help me resolving this issue also?
    Thanks & Regards,

  • Bdocs error data SMW01 (PRODUCT_MATERIAL)

    After running some replication we have a lot of bdocs error with the following logs :
    "Data for set BBPM_PR_GENERAL may only be changed in the original system SIDCLNT050 (our crm logical system)"
    "Validation error occurred: Module COM_PRODUCT_MAT_VALIDATE, BDoc type PRODUCT_MAT."
    we have found the corresponding note 786409 but eveni if our system is update, the bug is not fixed (we had the same function module wgich triggers problem)
    I checked some tables with a not the right logical system (logsys) but we tried to change it from one product id and it does not work.
    Any help will be rewarded.
    Thomas

    Hi,
       Which CRM release are you using?
    You may try re-generating the Bdoc (PRODUCT_MAT) services using trx.
    SMOGGEN
    . Then try reprocessing one or the error Bdocs or run the delta load once again.
    If no success, you may have to debug the CRM inbound queue and the validation service module
    com_product_mat_validate
    Good luck! Reward if helpful.
    - Sudipta.

  • Bdoc Error: PRODUCT_SRV while download Customizing Objects from ECC to CRM

    Hello,
    we have tried to download Customizing Objects from ERP to CRM we getting Bdoc error PRODUCT_SRV
    Please any help us in replicating customizing objects ECC6.0 to CRM7.0 Ehp1.
    Bdoc Type:PRODUCT_SRV
    Thanks,
    adi

    Adi,
    Where do you get the erorr? If you're downloding PRODUCT_SRV, then this is not a customizing object. Please check for related inbound and outbound queues in CRM and ECC for errors. Please also check SMW01 and see if you have any BDoc's in error. Give us the full error text of any errors found.
    If you get the problem with customzing objects, please let us the object name(s). Is it just one object or all customizing object?
    Best regards,
    Brian.

  • Bdoc error in SMW01 When Loading Materials into CRM

    Hi,
    We have recently done a system copy of our Production System to our Test System in R/3. We are now in the process of loading the Materials into our CRM 2007 Test System from the newly updated Test System in R/3.
    However, when loading the objects into CRM we are getting the following BDoc errors in smw01:
    Value X02 is not permitted for attribute Product Group 3 Value X02 - X09 is not permitted for attribute Product Group 3
    Area: COM_PRCAT
    Number: 20
    We have loaded the object DNL_CUST_PROD1 prior to the load of the MATERIALS object
    Does anyone know how this issue could be resolved?
    Thanks,
    Jonathan.

    Hi, this error refers to tax customizing so you should check what assingments you have in R/3 and then replicated on CRM.
    You can use transaction CRM_TAXCUST_VALIDATE to check the tax errors both in customers and materials.
    Then, according to the missing entries you will see on the transaction I told, you shoul check in R/3 tables TSKM and TSTL (used for materials).
    In table TSTL you have all the customizing made on R/3 transaction OVK1 and in table TSKM you´ll find the customizing made on transaction OVK4.
    The entries made there for your country should be the same ones made in CRM. The customizing path is the following:
    SPRO>CRM>Basic Functions>Taxes>Basic Settings>Tax Types and Tax Groups>Assing Tax Groups to SAP ECC Tax Classifications (Products)
    Here you have to enter the combination of:
    COUNTRYTAX TYPETAX GROUPTAX SEQTAx CL (which you should be able to fullfill after checking the R/3 tables I´ve told you..
    Please let me know if it helps,
    Regards,
    Lorena

  • BDOC errors after changes made in WebIC.

    We are receiving BDOC errors (viewable via SMW01) for BDOC type BUPA_MAIN.
    The errors reported are against message class COM_BUPA_BSP, errors 10 and 30, being:
    Validity start date before issue date
    and
    Enter a selection date in the past for historical data
    I have checked the validity start date for the BP/employee which has a from/to date of 01.01.0001 to 31.12.9999, however, I have not idea where the Issue date can be viewed against the BP/employee.
    Table BUT000 reveals both from and to date and also the created date, which is 05.09.2009, but I'm sure this is NOT the Issue date that is referenced in the error message.
    Can anyone be of help?
    Gary
    Edited by: Gary King on Nov 25, 2009 11:21 AM

    It turned out that the message was somewhat masked and was pointing us in the wrong direction. We finally discovered  that the Employee BP was actually missing some key data that was required by the externinal system. Non-employee BP's had that data which explained why these were being processed okay. We were so convinced that it was some kind of authorisation issue at the destination end that we missed the facts being (sort of) displayed.
    Gary King

Maybe you are looking for