Deleting Business group

Good Evening everybody
I faced the following problem today .
i defined a organization with a business group calssifaication and i filled the information wrongly,
i deleted this organization and the system didn't stop me , and then i defined another organization with a business broup and i filled it correctly .
the old organization is not appearing in the organization window , although it still exists in the database by querying the table PER_BUSINESS_GROUPS
so i have 2 business groups one of them is unwanted.
what should i do to delete it ????!

Dear Vignesh
in the old business group i filled Business Group Information as the legislation code : Saudi Arabia , and the currency : SAR
and because of previous problem i couldn't define the new business group as a Saudi Arabia Business group , so i put it as United States Legislation with USD Currency .
should i have to end-date the new one also and define business group legislation as Saudi Arabia and the currency SAR?
thank you !

Similar Messages

Need to delete an organization which is classified as business group

HI,
I need to delete an organization which is classified as business group. The additional business group details are filled but the classification enable check is not checked.
Unfortunately when I click the delete button I get the following error:
APP-PAY-07877: Database constraint violated.
The database check or unique constraint PER_JOB_GROUPS_FK1 has been violated. Please contact your system administrator quoting the package procedure hr_oru_shd.constraint_error and constraint PER_JOB_GROUPS_FK1.
We are using version 12.1 and as yet no job group has been defined.
Your help would be much appreciated.
Thanks,

Hi,
Yes ..it is possible by renaming the old BG and end date it and create a fresh BG... Mark your current BG as OLD and start creating a new BG with your prefered naming standard and do the setup correctly this time .
e.g. Suppose your current BG is set as : BG_EUR_IRELAND, change it to : BG_EUR_IRELAND_OLD, Put from date and to date as today's date. save it.
Please Run the replicate seed data concurrent request from sys Admin once the setup is done. If you are using 11i make sure, new BG is connected to correct LE & OU. Hope this will help.
Please try and let us know the result.
You can refer : http://forums.oracle.com/forums/thread.jspa?messageID=3719728&#3719728 which I posted for "how to delete OU"..
Hope this will help.... :)
Regards,
S.P DASH

Multiple Business Group Setting in R12

Hi
I have Created a multi BG structure where two business groups(UK&US) representing two different countries report to a single BG(IND) of other country. Both the BGs(UK&US) are having individual Org Hierarchies in respective responsibilities. While subordinating these BGs to main BG(IND) in Global Hierarchy, is it mandatory that we have to difine the entire structure(org hierarchy) for each BG? Instead, can we attach the org hierarchies that are previously defined for each BG to the hierarchy of main BG(IND).
If any one help me in setting up this multiple BG structure, It will be very useful.
Edited by: [email protected] on Mar 9, 2009 6:12 AM

Hi Matthew Bruckner
do you set deletion flag to your location master ? If not, please set deletion flag at first, then please delete your location by using /SAPAPO/DELETE_LOCATIONS .
To set deletion flag to your location, please perform following.
1. Open transaction /n/sapapo/loc3
2. From the menu, select "deletion flag".
(the location should be de-assigned from related data like product, model)
3. delete your location by using /SAPAPO/DELETE_LOCATIONS .
And if you have same location or same location product, I recommend you to add some kind of information to your location and product by using CIF user exit.
Please take a look at my comment in following thread.
Re: Integration multiple R/3 systems with APO via CIF
best regards
Keiji Mishima

ISE 1.2 - cannot delete AD group

Hi all,
I have a standalone node, ISE 1.2, in our lab which is joined to the AD.
By accident I added an invalid AD group, and when I try to delete the group and "Save Configuration", the ISE responds:
"Error: One or more of the groups being deleted are referred to by Authorization Policy Conditions."
However I cannot find any references to this group among the authorization policy conditions - so how can I remove the group?
Kind regards,
Lennart

Walfors,
I know what you're saying. While deleting a newly added AD group. you're getting below listed error even though the group is not referred or called inside any rule or policy.
Error: One or more of the groups being deleted are referred to by Authorization Policy Conditions.
It seems like a cosmetic defect
CSCug13042 error message incorrectly indicating AD groups are mapped to a policy
~BR
Jatin Katyal
**Do rate helpful posts**

In R12.1.3, MO:Security Profile Vs HR:Cross Business Group precedence

Hi All,
In R12.1.3, Which profile option has higher precedence in MOAC structure.
If i set the HR:Cross Business Group to NO at resp level and MO: Security Profile, which is associated to Global Security Profile which has two OUs of two different BGs.
For example:
I have BG1 - OU1
BG2 - OU2
Case 1:
Global Security Profile - XXGSP has both OU1(BG1) and OU2(BG2) associated.
HR:Cross Business Group - NO
HR:Cross Business Group - BG1
In Purchasing Responsibility, what could be the behavior when i create PO?. Will it show both OU1 and OU2? or OU1?
Case 2:
Global Security Profile - XXGSP has both OU1(BG1) and OU2(BG2) associated.
HR:Cross Business Group - Yes
HR:Cross Business Group - BG1
In Purchasing Responsibility, what could be the behavior when i create PO?. Will it show both OU1 and OU2? or OU1?
Case 3:
Global Security Profile - XXGSP has both OU1(BG1) associated.
HR:Cross Business Group - NO
HR:Cross Business Group - BG2
In Purchasing Responsibility, what could be the behavior when i create PO?. Will it show both OU1 and OU2? or OU1?
Case 4:
Global Security Profile - XXGSP has both OU1(BG2) associated.
HR:Cross Business Group - Yes
HR:Cross Business Group - BG1
In Purchasing Responsibility, what could be the behavior when i create PO?. Will it show both OU1 and OU2? or OU2?
Regards,
Soorya

Hi Soorya,
We are in a similiar situation and I was wondering if you have received an answer or how you proceeded?
Thanks,
Cathy

On my I phone how do I transfer contacts from one group to another then delete that group

On the Iphone how do you transfer a contact from one group to another group the delete that group from your list of groups? I am on outlook, i know thats the first problem.
John

iPhone: Transferring information from your current iPhone to a new iPhone

How do you delete calendar groups in ical 5.0?

I downloaded os x lion, and when I went into ical, I can't seem to delete calendar groups I don't want. How do I do this? Thanks!

Click on the event, and use the delete key. Or click on the event, and choose iCal>Edit>Delete.
Good luck.

Can't delete Calendar Group or Revert it to a plain calendar

I am trying to start using iCal in an office setting where we will be synchronizing across a few different computers. Having played a bit with fake data and made a few sample groups/subcalendars I'm now trying to go back to a clean slate so we can start in earnest. But having deleted most of the false calendars I am left with one "calendar group", with a single subcalendar. I do not want any calendar groups--just single calendars, but any new calendars I add automatically become subcalendars instead of being on equal footing with the "group" calendar. Is there any way to delete the group and just end up with a simple list of individual calendars? Thank you.

Thanks for the suggestion, John. I was hopeful that would work, but it didn't. I can't get the new calendar out of the group, no matter how far or in which direction I drag it, and therefore I can't delete the group. I could delete either of the subcalendars (but only one--it insists on the group having a minimum of one subcalendars--understandable, I guess).
Any other ideas? Do I need to somehow uninstall and reinstall iCal and start over? (I used to use Windows so I got used to uninstalling and reinstalling software....)

Transfer Employee From one Business group to another

Hello,
As per my understanding we do have a functionality of transferring employee from one business group to another. Can any one tell me the exact steps for the same. It is there from 11.5.10 and the profile setting we have to set is HR: Propagate Data. Can anyone tell what from here I need to do for a transfer for employee between business group.
Thanks

hello Pdelapena,
Benefit tab is not available for all BG responsibility, like india is not having the benefit tab.
Secondly if i want to go for some Long range compensation say an employee has worked for 2 yrs then he is eligible. Now technically speaking the the transfer employee should be eligible for the same. But if we terminate him and then hire him back in the new BG only the thing that is same is Party_ID apart from that is nothing same. Can you please put some suggestions.
Eg: Person Hired on 10 Jul 2007 in US BG
Person Transferred to India BG on 20 Jul 2008
Now the company plans to give a compensation to all the employee who have been part of the company for 2 yrs or plus till 20 Jul 2009
Now this particular employee will not be pulled out in the eligibility criteria.
Can any one please pass there comments
Thanks
Nitin

API TO MIGRATE PERSON FROM ONE BUSINESS GROUP TO THE OTHER

Good afternoon guys,
Please can I have a sample API to move a person from a business group to another.
Thanks for your response.
Warmest regards,
Olivet

Hi Olivet
Please can I have a sample API to move a person from a business group to another.Api's in EBS
Re: Api's in EBS
http://sairamgoudmalla.blogspot.com/2009/05/script-to-find-oracle-apis-for-any.html
API
Fixed Asset API
List of API
Re: List of APIs
Hope it helps
Regard
Helios

How to retrive only data related to specific business group efficiently?

We have sql queries which were written for an instance assuming that there will be only one Business Group. Now, we want to reuse those queries for another instance which is based on multi business groups.
I understand, using fnd_profile.value('PER_BUSINESS_GROUP_ID') this, we can join with BG ID in correspondingthe tables. I found below tables which are used in my query.
ota_delegate_bookings
ota_events_tl
ota_activity_versions
ota_activity_versions_tl
ota_activity_versions
ota_category_usages
ota_offerings
per_person_types
ota_booking_status_types
hr_locations
per_all_assignments_f
per_all_people_f
per_org_structure_elements
hr_all_organization_units
Now my question is, do we need to join this BG id for all these tables using the value from above profile?
For example, employees difined in system are specific to one BG. Even though when we use/join with person_id in per_all_people_f, we will get unique record. So still is there any need to join with this BG id ?
My concern is, in my query there are many places where I need to add this extra BG id condition, this may reduce performance of the query. I am not sure whether I have to change if id's are being used in the query.
It would be very helpful, if any one can share the best practices(technically) when working with multiple BG, LE, OU's etc..
Best Regards,
Venkat.Y

Its difficult to summirize all that is needed for multi-org -
Check below -
https://forums.oracle.com/forums/search.jspa?threadID=&q=multiple+AND+BG&objID=f113&dateRange=all&userID=&numResults=15&rankBy=10001
Can Multiple Business Groups Be Associated with a Single Opearating Unit? [ID 732664.1]
FAQ - Multiple Organizations Architechure (Multi-Org) [ID 165042.1]
Cheers,
Vignesh

How to go for multiple business group

Dear All.
This is a very common and perhaps very old question now. But I just want to check what is the common process to go through to achieve multiple business groups. We are in oracle 12.1.XX and have single business group but now looking to implement more business group for other countries in same instance. I understand most of the objects would be same and they can be reused like DFF, Locations, Lookups, Value set etc but need to focus more on RICEW components. May I request you to please share your experience on this and let me what are the mandatory steps we need to follow, like running some seeded programs, restructuring other objects, creating seprate DFF, Valueset etc.
Thank you in advance (But that dosent mean I will not thank you later on )
Avinash

Hi Vignesh,
Thanks again for your quick response..
We are not migrating employee records.. we have one business group already and we want to create new business group for newly aquired company which is in other legislation. So just want to know what would be impact on existing BG and what are the objects we can reuse. For example we need to create New responsibilities, Menu, functions, job, position, person type etc.. Similarly we can use existing location, valuesets from existing BG in our new BG. Like this we want to create a list first so that we can plan our implimanation and come up with timeline..
I hope it is clear now.
Thanks,
Avinash

Single Item Master across Business Groups

Hi Gurus,
Client wants to implement single item master across the business groups (BG).
Does this require set up of HR Profile for allowing Cross Business groups?
Is there any other setting that needs to be done (in addition to traditional Inv Org definition)?
Appreciate your early response.
Thanks,
Sudarshan

Sudarshan
I think you need to setup Hr security profile only if you are using that. If not you just need to enable the profile value for cross business group. This is required just in case if an employee needs to be picked up in the lov in an item attribute (I don't remember whether there is one) from diff BG.Also move order approvals need to be tested if you are using that feature.
In general I think anything that need to do with employees need to be tested.
Thanks
Nagamohan

Business group structure in 11.5.10.2

Hi all,
I am using Vision demo for 11.5.10.2. Is there any feature where we can outline business group structure ? I think it is available in DashBoard. However, I could not be able to find it out.
TIA.
dba.apps.

Login to your ebusiness suite and run the oracle diagnostics test 'Organization Structure'
This would give you details about organization structure like business group definitions, GRE/Legal Entity accounting details etc.
more information on Oracle Diagnostics at
http://appstech-sam.blogspot.com/2006/09/oracle-diagnostics.html
Sam
http://appstech-sam.blogspot.com

Same Org as Business Group and Operating Unit cannot be migrated via isetup

Hi,
I have tried to migrate the setup of an organization which is classified as both Business group and Operating unit.
When it comes to Operating unit API, it errors out with the following Warning message.
I request the iSetup Team to clarify whether there is any restriction in iSetup that the same org as BG and OU cannot be transferred.
If yes, then how to migrate the same...
The above situation happens for the org classified as OU and IO. In this case the INV org API give the warning message.
Regards,
Senthil
Name: HR_OperatingUnit
Type: BC4J
Path: oracle.apps.per.isetup.schema.server.OperatingUnitAM
Time Taken(seconds): 1.0
Importing rows from xml file, and validating rows ......
Message not found. Application: AZ, Message Name: AZW_FWK_USER_ROW_EXCEPTION. Tokens: VONAME = Operating Unit; KEY = Name = 'POC Business Group'
Group Name = 'POC Business Group'
; EXCEPTION = The organization 'POC Business Group' is a business group, please use the business group API to handle it
Transaction rolled back
Processed API:HR_OperatingUnit
Generating Deployment Report...
Generation of Deployment Report process completed.
Status: WARNING
******************************************

It is a known issue and has been fixed as a part of HRMS 12.0.7. You may apply HRMS 12.0.7 or request for back-port on top specific version.

Deleting Business group

Similar Messages

Maybe you are looking for