Deleting chunk of video along with audio

Hi,
I recorded audio separately from video. I've dropped the audio into the project and synced it with the video (wasn't easy!). Now I want to delete a chunk of video and the corresponding chunk of audio, but when I select and delete the frames, the audio track stays unchanged.
What's the solutio to this problem?
Thanks,
ib@fb

You need to select both the clip and the audio track (in fact all clips covered by the audio track will be highlighted), position the playhead at the start of the part you want to delete then right-click Split Clip. Both video and audio will split at the same place.
Now move to the end of the part you want to delete and do the exactly the same (you will need to select the second part of the audio track plus the second part of the video clip).
Finally delete the middle bit of the clip (the audio track attached to it will go too).
Geoff.

Similar Messages

After recent upgrade to Yosemite on Macbook air bluetooth audio cuts out and associated video stops with audio. Likewise with airplay and Apple TV. I have deleted all my saved wifi connections and restarted numerous times. I do not expect a resolutio

After recent upgrade to Yosemite on Macbook air bluetooth audio cuts out and associated video stops with audio. Likewise with airplay and Apple TV. I have deleted all my saved wifi connections and restarted numerous times. I do not expect a resolution from the community, but hope to get the attention of Apple engineers. If you are having same problems or have a miracle cure I am all ears.

May start my own thread, but I'm having similar issues.
I've been using an old iMac (running 10.7.5) and Apple TV for years with no issues. Last week I bought a new Macbook Pro running Yosemite and have had audio issues multiple times. The weird thing is that sometimes it works flawlessly, other times (like now) I spend half an hour just trying to get a song to play.
My issues are: When I got to "computers" in Apple TV to stream my music, my music is sometimes chopper or intermittent, and I seen to know when it's going to happen based on the status wheel just before it plays. When I choose a song, the status wheel will spin for an unusually long time, usually an indicator that the audio is either not going to work, or stutter.
When it does finally pull up a song, the playhead sits at the beginning of the song for a good 3-5 seconds before actually playing. Then, when it starts playing, it's all downhill. It will play a few seconds, drop out, play a few more seconds, drop out, and then ultimately the playhead will keep moving across the song as if it's playing, but there's no audio.
Again, this is a new phenomenon never experienced by me. I've tried everything I could think of, some of them all at once:
• restart Apple TV
• restart Macbook Pro
• quite iTunes/open
• turn off Home Sharing on iTunes then reconnect it
• unplugging and cycling both my modem and router
None of these have alleviated the problem.
The odd thing is, like this morning, the audio started up perfectly and never gave me any issues. It wasn't until later in the day that it started. Perhaps after the macbook pro had been put to sleep? Not sure.
Regardless, this is an annoying trait, one that's new to me and my system (as stated, worked flawlessly until my new purchase), and is 100% limited to either a) the macbook pro b) Yosemite or c) both of them.

After upgrading Lightroom on a mac. Deleting the older version along with old catalogs and files?

Can I delete the older version along with old catalogs and files? and what is the best way to go about this? Thankyou : )

manually uninstall then, Manually uninstall Lightroom

Deleted cell number appears (along with the edited number) when sending a text. How do I get rid of it?

Deleted cell number appears (along with the edited number) when sending a text. How do I get rid of it?

It has nothing to do with iOS 6. It's always been that way. Given that it's been this way for so long, one assumes that Apple knows about it and has their own reasons for not changing it.
Restore the phone as new, not from back up to delete the numbers. Or, wait until the cache gets overwritten.
Best of luck.

Insert a video clip with audio in a sequence

I've created a sequence out of three subclips and renamed and saved it. When I try to add another video clip with audio to the end of the last subclip in the sequence it only adds the video, not the audio.
Please advise

Edit the video with sound to your timeline, when you are ready to replace the video with pictures, lock the audio tracks by clicking on the locks at the left side of the timeline:
Clicking on the locks will lock the tracks and will protect them from being affected when you replace the video with pictures.
Remember to unlock them when you want to edit or add more audio to the sequence.
MTD

Problem syncing video capture with audio sountrack

Hi,
I'm a drummer. I'm trying to use iMovie to record a video of me drumming to a pre-recorded song. I want the final video to be me drumming with mixed audio of both my drumming and the original soundtrack. (Here's an example of someone else doing this on youtube: http://www.youtube.com/watch?v=cgqYkBFSva4)
I'm recording the video using iMovie's import from FaceTime (ie. straight from my MacBook Air) and then adding the song that I played along with as an additinal audio track from iTunes, and syncing.
This is where I hit a problem, and it's driving me nuts. When I sync the iTunes song into my iMovie project I use waveform view to line it up so start of the song is perfectly in sync with the start of the video of my drumming. That works fine. But then gradually over the course of the video the song track goes out of sync with the video/audio of me playing, and by the end of a 6 minute song there's a very noticable gap, which both looks and sounds terrible.
This is very strange since it's the same audio track I was playing along to! In real-time when recording I was obviously in sync with the music, but then when adding it back to the recording it somehow no longer lines up.
Does anybody know why this is happening and how I can resolve it? Is this a frame-rate issue?
It seems to me this shouldn't be so hard to do what I'm trying to do ...
Thanks!
Ari

Hey Ari,
I was having a similar problem perhaps and this is what I did to fix it.
timothymckean
Re: iMovie '11 audio sync issues since 9.01 patch
Jan 24, 2012 12:11 AM (in response to Urban Shocker)
Hi All,
I've been dealing with this sync problem tonight as well and here's what I found that worked.
I noticed that the audio sync was fine when I viewed in Quicktime 7, but not in iMovie. I also noticed there was a small indicator on the clips in iMovie notating that the source clips were in 17 fps, not 30 fps. This is odd because I recorded the clips using the FaceTime HD camera right into iMovie and it never gave me the option for framerate on the recording. Viewing the source video in Finder I also realized that the codec for the source was Photo Jpeg... yuck. Who's choice was that.
Using MPEG Streamclip (free video converter) I converted the source video clip to a Quicktime .mov at 30 fps and using the Apple Intermediate Codec and all the audio sync issues were fixed. Didn't have to optimize, detach, or - most importantly - re-edit anything. Apple's editing systems love Apple Intermediate Codec (AIC), I don't know why they don't import in this codec by default.
** Download MPEG Streamclip from http://www.squared5.com/

Aperture - when you have saved a multi-media slideshow and you export it how do you make sure the audio track retains the volume drops that you programme in? I have video clips with audio, which when they play in the slideshow, I fade the audio (music)?

Aperture - Sorry I'm new to this so this might be a bit long! I put together an aperture slideshow with a backing music track and some video interspersed with photos. When I exported it to put on you tube the audio backing track had not saved the fades that I had programmed when the video clips played. The video clips had audio on them that I set at one volume whilst fading the backing track. these fades didn't save on the exported version. Any suggestions please? Regards, Maxjackpete

Creative Cloud chat support (all Creative Cloud customer service issues)
http://helpx.adobe.com/x-productkb/global/service-ccm.html ( http://adobe.ly/19llvMN )

Video transitions with audio

Hello all,
Is there any way of doing a seamless transition from a menu to track with audio as well as video.
I'm trying to create an interactive DVD for Children where you click on a rabbit, it then moves in the video transition and then becomes a track where ther is a close up of the movement.
I have audio on the close up as it is a track but it would make it much better if there was audio on the transition movie.
thanks for any help
Fred

What sort of programmes do the high end blockbuster DVD producers use?
Some very high end expensive ones like Scenarist and others. Though between DVD SP, DVD AE and some good encoders (such as bitVice, digigami, or CC running on a MacIntel Windows set-up) you can do some real good things and accomplish many things that need to get done. The real kicker for those DVDs (IMO) is the source footage - cameras, lighting and post work. Dealing with real good source is a plus.
And of course you have very talented graphics people for the menus and so on. But once those elements are made and encoded to m2v, DVD SP for the most part, with DVD AE, can do alot of the same things. The vast majority of what is on a DVD for many DVDs really is not different. You get your cutsey things and so forth, and things that make you go "coool" especially when you author your own DVDs.
Jake, Hal and others probably can fill you in more on what they like in the other systems and what they think DVD SP may/does lack, but again DVD SP and DVD AE together is a pretty strong set up.
There is also other software out there that adds interactivity to DVDs (I think things like Who Wants to Be A Millionaire on DVD and some others may have used variations) but do not hold me to it.

Flash videos playing with audio echo on initial load.

I have been having issues playing Flash videos in the current version of Firefox (10.0) as well as the previous version (unknown) over the past few months.
When I open a page with a video it will begin playing with an echo as if two videos are playing at the same time with a slight delay on the second video causing an audio echo effect. So basically one video with echoing audio. The websites that I experience this the most are yahoo sports (happens practically every time) and gamespot (happens occasionally). If I refresh the page the echoing effect goes away.
I am running Windows 7 64-bit.
I have updated video drivers on my ATI Radeon HD 5800 series.
My flash player / shockwave is 11,1,102,55 (updated) but I know I have experienced the same problem with previous versions.
I have the following plug-ins enabled:
1. Adobe Acrobat 10.1.2.45
2. Current version of Ad-Block
3. Divx Plus Web Player 2.2.0.52
4. Divx VOD Helper Plug-In 1.1.0.6
5. Microsoft Windows Media Player Firefox Plug-In 1.0.0.8
6. Quicktime Plug-In 7.7.1 / 7.7.1.0
7. Real Player 32 Bit Plug-Ins (4 total plug ins) 15.0.0.198
8. Veetle Plug-Ins (3 total plug ins) 0.9.17.0
I have some others as well but I thought these were the only relevant ones.
Can anyone help me with my problem?

Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

Front Row - Lid Closed - Blank Videos (but with audio)

I hooked my computer up to my TV last night to watch some videos through front row (stupid quicktime and the pro lockout on full screen - talk about penny pinching from Apple!). Front row worked fine if I set it up so that the TV mirrored my laptop display. However, if I tried to run the laptop in lid closed mode with the TV as my main/only monitor everything would work except for the videos. They would be black while retaining the audio. For example, the little preview movies shown in the selection menu were black as was the movie when you played it.
Is this a known bug? Is there a fix? (Obviously I can run it more or less similarly with mirroring and my main screen dimmed as I did.)

i'm having the same issue. The video i tried was purchased from the iTunes music store. i see no preview of the video and no video is played on screen however audio is present. the same problem also occurs when trying to watch a movie trailer via movie trailer front row interface. All Front Row graphics are seen, only video is a problem. I can open and play back the video without problems in Quicktime Pro. (fullscreen)
The video output is 1280x720 sent to a samsung tv using a built in profile with overscan disabled.
Macbook (white) Mac OS X (10.4.6) 2.0Ghz Core Duo - 2GB RAM

Video editing with audio

How could it be added audio while editing video with Lumia 520?

there are a few apps in the store that perform this function for you, just can't remember the name of them...

Creating a video slideshow with audio

Ladies & Gentledudes,
I have some recorded lecture notes (basically the lecture on digital
dictaphone), and also the Powerpoint or .pdf slides that go with the
lecture. I can seperate these slides out into raster images if needed
(eg use Grab to get them as .tiffs).
What software would you consider is the best/most effective to combine
them to create a video slide show of the Powerpoint slides to match
with the audio lecture notes that I have recorded? I would ideally
like to be able to view it through my iPod touch.
At the moment I can only think of using Garageband to clean up the
audio (although not 100% on how to do that), and then use iMovie to
create an audio slideshow.
If you know of a free solution (or one that comes preloaded on a Mac)
that would be preferred, but I would also like to hear optimum and most effective
solutions as well if there is a cost involved.
Many thanks for your time and help, James

Welcome to the Apple Discussions.
iMovie is a very straightforward way to do this.
Import your sound and your images, stitch them together and then export them in an iPod compatible format.
Job done.
Regards
TD

Export video file with audio 5.1?

I use AC3 filter for Adobe Audition.
So i can import a video file (wmv) with 6 audio channels and edit multi track.
But i can't export a wmv file with 6 audio channels.Just 2 channels only.
Is there any solution to export a video file (wmv) with 6 audio channels?

You'll have to export as wave and use the free Windows Media Encoder to do this.

IPod video problems with audio

I recently got a 30 GB iPod video. I have tried to add videos to it, but sort of unsuccesfully. Of the four videos on there, 3 don't have audio.
The only video that has video and audio is a .mov, and yet the other .mov files that I tried to put on, wouldn't even convert.
The other files are .mpg, and they converted and transfered on perfectly, except there is no audio. The video looks great, but you can't hear anything.
Has anyone else had these problems? Any advice/help is appreciated!
-Cristina
G4 Mac OS X (10.4.3)

Hi there Christina!
You'll need to convert it to a .mp4 or a .mov file.
Here's more information on requirements:
H.264
File formats: .m4v, .mp4, and .mov
Video: Up to 768 kbits/sec, 320 x 240, 30 frames per second (fps), Baseline Profile up to Level 1.3.
Audio: AAC-LC up to 160 kbits/sec, 48 Khz, and stereo audio.
MPEG-4
File formats: .m4v, .mp4, and .mov
Video: Up to 2.5 Mbits/sec, 480 x 480, 30 fps, Simple Profile.
Audio: AAC-LC up to 160 kbits/sec, 48 Khz, stereo audio.
If you need more information, see this article.
If you need more details, post back here and I'll do my best to help. You may also want to look at the squared5 website (I posted a link for that site in my first post) for more information.
Best of luck!
~Lyssa
~iBook G4 1.07GHz (Kaiya), with extra 256MB RAM ~and a red Apple logo~(Mac OS X 10.3.9)~ LaCie 160GB external hard drive~ ~3G 15GB iPod (Nakai)~ ~GiveStarsto users who earn them.~

Video chat with audio on one end but not the other!!!

Hey Everyone,
My friend and I have been video chatting lately and have encountered a kind of peculiar problem. We can both see eachother without a problem, and I can hear her just fine, but for some reason she cannnot hear me! The really strange thing is that when we initiate just an audio chat we can both hear eachother fine, which seems to eliminate the possibility of some preference setting somewhere being the problem. We're both using MacBooks, her ISP is Comcast cable, and my ISP is Hughes Net Satellite (formerly known as Direcway). Here's what we've both tried so far:
1. Setting our QT streaming speed to 1.5 Mbps
2. Setting our iChat Video Bandwidth limit to NONE
3. Making sure volume was up, no headphones plugged in, and that everything was as it should be in System Preferences>Audio
4. Making sure Microphone is enabled under iChat>Video
Any thoughts on why this is happening or how to fix it would be greatly appreciated!
Thanks,
David

Hi,
It may well be the Comcast end.
Try rebooting the modem.
6:46 PM Sunday; August 19, 2007

Deleting chunk of video along with audio

Similar Messages

Maybe you are looking for