Deleting contacts globally for all devices

i have 4 Apple devices that sync to my ICloud account  I turned off contacts on all but one device and spent the better part of a day deleting contacts on the one device one by one  turned the device off and back on .  I did delete the contacts on other devices by turning off contacts  I then restarted the one device and allowed a full boot.  I then turned on the contacts to the other devices and joila all of the deleted contacts reappeared.  So frustrating.  My question is how do i access  the Icloud account to delete un-wanted contacts globally?

Assuming this is icloud sync and not something like Gmail, when you edit the contacts on one device it should refresh on all devices that sync. It sometimes takes a little while depending on network connections and such.

Similar Messages

  • Delete emails simultaneously on all devices

    I have Verizon, use an iMac, iPhone & iPad and want to delete emails simultanously on all devices instead of on each one separately.  How do I do this?

    Use an IMAP account.  IMAP is designed to keep multiple devices in sync.
    POP is designed for access from one computer.

  • HT201251 I want to use 30  ipads to run kiosk software in my restaurant. Can I use one Apple ID (and one credit card) for all devices

    I want to use 30  ipads to run kiosk software in my restaurant. Can I use one Apple ID (and one credit card) for all devices?

    Alternatively you can always manage your iPads (does not matter how many) with a single apple id and all reporting to your account under "find my device" service. Keeping an eye on all your units. Additionally as you mentioned these are for your Restaurant you may find the solutions offered by this company who creates apps and hardware for this purpose: http://www.spartakioskpro.com
    Additionally if you expand beyond those 30 iPads to say 300 you will want to enable or plan on MDM as your best option to automate every ipad to use the same profile and app and ios configuration while also keeping a close eye on all of them via online MDM services like: https://meraki.cisco.com/products/systems-manager
    Here is a pic

  • How can I create a magazine web app for all devices?

    How can I create a magazine web app for all devices?

    magazine web app is not supported in DPS as of now. You can share the contents to preview it on web content viewer.

  • Please a simple problem but I don't know how to solve it. After installing 16 gb of ram all is good but when I turn on the computer it is a window signaling that all is correct. How is possible to delete once and for all that window? Thank you

    Please a simple problem but I don't know how to solve it. After installing 16 gb of ram all is good but when I turn on the computer it is a window signaling that all is correct. How is possible to delete once and for all that window? Thank you

    Well then maybe you could take a screenshot because the appearance of such a window is news to me.
    Also post your OS X version and what model Mac you have. The more detail, the better. Thanks.
    To take a screenshot hold ⌘ Shift 4 to create a selection crosshair. Click and hold while you drag the crosshair over the area you wish to capture and then release the mouse or trackpad. You will hear a "camera shutter" sound. This will deposit a screenshot on your Desktop.
    If you can't find it on your Desktop look in your Documents or Downloads folder.
    When you post your response, click the "camera" icon above the text field:
    This will display a dialog box which enables you to choose the screenshot file (remember it's on your Desktop) and click the Insert Image button.
    ⌘ Shift 4 and then pressing the space bar captures the frontmost window.
    ⌘ Shift 3 captures the entire screen.
    Drag the screenshot to the Trash after you post your reply.

  • Contact sheet for all pages in a book

    In the Bridge there is a command to make a contact sheet for an InDesign document. Is there a way to make a contact sheet for all the documents in a book at the same time?

    You may be able to do that with JavaScript (check the scripting forum for help there). Otherwise, I think I remember such in the preflight options. At least worth a check.

  • Best Adobe Captivate Screen Size for all Devices?

    Which would you say is the best screen size to use to cater for all device types (pc, laptop, tablet, mobile, etc.)?
    Thanks.

    Hi there,
    You can select any moderate screen size and publish the course and on the publish dialog box, check "Scalable HTML content" (only in case of .swf, HTML5 and PDF).
    If you are not sure about which screen size to choose and you are creating a course for large audience for devices and systems of different resolution, then  800 X 600 is recommended.
    But now, with scalable HTML content checked, your course window will fit to the screen size of the device, and there will not be any scroll bar.
    Thanks.

  • How to block a website (for all devices) on an EA6900

    I'm trying to figure out how to block a website for all devices connected to my router. The only thing I can find is blocking websites by device. Please tell me that they did not take this feature away.

    welcome to the 'smart' world.  I think one of the best improvements Belkin could do is to give us back the option of the old gui. so much more useful.

  • Creation of Custom Stylesheet and attaching Globally for all WDA

    Hi All,
    I want to create a Custom stylesheet and attach the style sheet globally for all the WD Applicaitons.
    Can anyone please help me to achieve this requirement.

    You can't directly interact with the Stylesheets of Web Dynpro.  You only have access to the concept of theme. If your WD Application runs in the portal, it will inherit the portal theme automatically. You can customize this theme using the portal theming tools.
    If your application runs standalone, then you would have to use the unsupported Eclipse Based Theme Editor (which can be downloaded from SCN). The are Community create how-to guides on SCN for how to download the theme from the MIME repository, edit it and then re-upload it to the MIME Repository. You then use Web Dynpro Application Parameters to force the usage of your customized theme.

  • Last back up: never . i am connected to a wifi network and phone also pluged in yet my icloud never backs up , i have also deleted previous backup for all applications(although there was never any successful backup)in"manage storage" still no headway

    last back up: never . i am connected to a wifi network and phone also plugged in yet my icloud never backs up , i have also deleted previous backup for all applications(although there was never any successful backup) in " manage storage" still no headway

    rucchyy wrote:
    my Internet is working fine . i also turned the iCloud drive off, could this be the reason I can't back up?
    No.
    Have you done:
    Restart / Reset
    http://support.apple.com/en-us/HT201559

  • Merging 2 apple id's in family for all devices

    Is there an easy way to merge 2 different apple id's in the same family for all devices & iCloud?

    No

  • LMS 4.1 shows "No records" for all devices

    Hello everyone,
    One of our end clients noticed that there is a "No records" message when choosing to show syslog messages for all devices that are configured on his LMS.
    Under "LMS - Admin > System > Server Monitoring > Processes" I can see that the "SyslogAnalyzer" and "SyslogCollector" are showing as "Running normally"
    Also see attached screenshot:
    I would really appreciate your advise on this issue.

    hello Daniel,
    you are getting syslogs but they are getting filtered .
    go to >>
    Admin > Network > Notification and Action Settings > Syslog Message Filters
    and change the filter settings . Try >> KEEP and Enabled combination. after changing settings check the syslogs collector status , Keep an Eye on the Forwarded column, you should see counts in it instead of  zero .
    you might need to play with filter settings   to get this worked. 
    This is how Filters works:
    Scenario 1:
    All filters are disabled. Mode:Keep             (Like in Our case with
    Disabled the LINKUPDOWN and  Mode is Keep  .so all the messages for that
    LINKUP DOWN will be only Forward)
    All messages will be forwarded.
    Scenario 2:
    All filters are disabled. Mode:Drop
    All messages will be filtered.
    Scenario 3:
    Atleast one filter is enabled. Mode:Keep
    Only those syslog messages that satisfy the enabled filters will be
    forwarded and all others will be filtered.
    Scenario 4:
    Atleast one filter is enabled. Mode:Drop
    Only those syslog messages that satisfy the enabled filters will be filtered
    and all others will be forwarded
    Thanks-
    Afroz
    [Do rate the useful post]

  • LMS 4: VLAN config fetch failing for all devices

    LMS 4.0.1, standalone on W2K8 R2, new install
    Vlan config fetch is failing for all devices.  If I attempt to put a vlan.dat file in tftpboot and then manually copy a vlan.dat file from a device, the following is returned:
    TFTP: error code 2 received - 16739
    %Error opening tftp://server_name/vlan.dat (Permission denied)
    The Windows application logs ont the server log this:
    Log Name:      Application
    Source:        CRMtftp
    Date:          6/15/2011 2:07:49 PM
    Event ID:      3
    Task Category: None
    Level:         Error
    Keywords:      Classic
    User:          N/A
    Computer:      server_name
    Description:
    GetEffectiveRightsFromAcl failed: Overlapped I/O operation is in progress.
    (997)
    I tried restarting crmtftp, but no luck.  Any ideas what may be causing this?
    -Jeff

    I have the same issue with a freshly installed 4.2 version now:
    Log Name:      Application
    Source:        CRMtftp
    Date:          2/24/2012 12:30:50 PM
    Event ID:      3
    Task Category: None
    Level:         Error
    Keywords:      Classic
    User:          N/A
    Computer:      srvwienlms.nts.local
    Description:
    GetNamedSecurityInfo failed failed: The operation completed successfully.
    (0)
    I will also open a TAC case, lets see if we still have to stick with a3.x TFTP binary...
    br.herwig

  • Lenovo Yoga disables WiFi for all devices

    I have a Lenovo Yoga 2 that connects fine via LAN cable, but when i disconnect and try to use WiFi it disables my wireless router for all devices.  The wireless router works fine for windows phones, android phones and other laptops.  The Yoga disables WiFi every time it connects - is there some setting i can change to fix this?  how do i diagnose what is going on?  I've checked Ipconfig /all but it looks normal.  Any ideas?  thanks

    Sounces like the network is overloaded, or there's interference.
    Try ethernet.

  • Apps for all devices?

    I am a freelance deisgner with a Individual account through Creative Cloud. If Iwant to create apps for all devices, not just iPad, through DPS what do I need to do, or is this possible with the set up I have?

    CC accounts provide only Single Edition for iPad. For any other device
    you'll need a Pro account at a minimum.

Maybe you are looking for

  • How can i add two values under the same property?

    Hi all, How can i add two values under the same property name in a prop list? For example: [question1: "item1","item2", question2: "item3","item4"] To be more precise, i am creating a property list and I want whenever a two values have the same prope

  • Since update to gnome 3.4 gnome-control-center and sound broken

    Hi, I updated from 3.2 to 3.4 using sudo pacman -Syu. Since the update there are many things broken. I don't have any sound and when I try to start the gnome settings I get following: gnome-control-center *** glibc detected *** gnome-control-center:

  • What version number should my Camera Raw plug-in be in Photoshop CC 2014?

    I'm running Windows 7. My Photoshop CC 2014 is running Camera Raw version 8.3.0.141, yet I have seen postings for version ACR 8.5, but I cannot find any download for version 8.5 only a version 8.5 DNG converter. My Lightroom 5.5 is running ACR 8.5 th

  • BDC does not work in the list of report.

    Hi All, I have report with selection screen and after entering the value in selection screen it goes to module pool screen and shows output in table control. And after click one button here the output shows in the list. After getting the out put in t

  • Yosemite Apple Mail prints too small

    After Yosemite upgrade the body of text in Apple Mail messages prints extremely small. 2 Printers tested - HP Laserjet 5100tn and a Konica Minolta 5500 with a Fiery controller. Printing to a PDF file first is OK. This only seems to occur when I print