Deleting data from an Infocube in BW using ABAP program?

Hi Everybody,
I have to create a ABAP program in SE38 which, on execution will delete selected data from a Cube in BW module. How to achieve it. Is there any function module that can do so? Eagerly waiting for your suggestions.
Regards,
Pulokesh

Dear Ravi,
Other than two parameters I_INFOCUBE, I_SHOW_REPORT do i need to pass any value to the table I_T_SELTAB.
Regards,
Pulokesh

Similar Messages

Deleting selected data from an Infocube in BW using ABAP program?

Hi Everybody,
I have to create a ABAP program in SE38 which, on execution will delete selected data from a Cube in BW module. How to achieve it. Is there any function module that can do so? Eagerly waiting for your suggestions.
Regards,
Pulokesh

select the records from the cube or ods and put in to one internal table.
and then u can delete the records

Error while deleting data from a write optimized DSO using a Process Chain?

Dear Bwers,
I am facing a strange error while using process chains to delete data from data target which is a write optimized DSO. The process shows as failed but the data gets deleted in the DSO. The error message is as below. Did anybody have a similar problem? Any suggestions.
Thanks
Raj
Error while deleting content of InfoCube/DataStore object ZLSD_G03
Message no. RSDODSO153

Please, check if you get any short dump in ST22 related to this issue.

Deleting data from an infocube

If I want to delete the data from an infocube before I carry out a load as part of the daily load can I do this and if so how would I do this? Thanks

This might be of some help:
Steps for process Chain
Start
Delete Index ( for Cube )
IP1*.....
Delete Overlapping Requests from InfoCube*
Create Index ( for Cube )
IP1 - Infopackage - Datatargets - Automatic loading of similar or identical requests - Select Deleting Existing Requests - Flag Full or Initial Load - Flag Datasources are same - Selections Are " Same or Comprehensive " - Save .
Delete Overlapping Requests from InfoCube* - In this process type - Object Type - Execute Infopackage - Select the one in use for Full with the Tech name - Click on Deletion Selections at the bottom - Set the same selections as in the Infopackage.

Error deleting data from an InfoCube

hi, all,
i try to delete all data from an InfoCube. All the /BIC/D* tables was deleted and recreated, but the /BIC/F*-Table cann not be deleted - Error-Message:
"Database table /BIC/FZPCA_C01 could not be deleted or recreated
Message no. R7861"
The SAP-Note 745742 doesn't help - tere is SP-Level 13.
Any Idea?

I got the same error meassage when I tried to delete data in my infocube.
1. I typed TC:SE14
2. Entered the name of the infocube fact table.
3. Checked the delete data radiobutton and clicked the 'Activate and adjust database' .
And the data in the fact table was deleted
So thanks guys

Unable to delete data from a partition

Hi,
Unable to delete data from a partition
I am using the command as:
ALTER TABLE TEST DROP PARTITION DATE_20090820090000
Its giving 0 rows deleted.Bu there are 200 rows for the Partition.
The partition is getting deleted but the data remains.
I want a command where the data in the partition also to be deleted along with partition.
Any help will be needful for me

SQL> CREATE TABLE range_part (
prof_history_id NUMBER(10),
person_id NUMBER(10) NOT NULL,
organization_id NUMBER(10) NOT NULL,
record_date DATE NOT NULL)
PARTITION BY RANGE (record_date) (
PARTITION yr0 VALUES LESS THAN (TO_DATE('01-JAN-2007','DD-MON-YYYY'))
PARTITION yr7 VALUES LESS THAN (TO_DATE('01-JAN-2008','DD-MON-YYYY'))
PARTITION yr8 VALUES LESS THAN (TO_DATE('01-JAN-2009','DD-MON-YYYY'))
PARTITION yr9 VALUES LESS THAN (MAXVALUE) );
Table created.
SQL> INSERT INTO range_part VALUES (1, 1, 1, SYSDATE-720);
INSERT INTO range_part VALUES (2, 2, 2, SYSDATE-360);
INSERT INTO range_part VALUES (3, 3, 3, SYSDATE-180);
INSERT INTO range_part VALUES (4, 4, 4, SYSDATE);
1 row created.
SQL>
1 row created.
SQL>
1 row created.
SQL>
1 row created.
SQL>
SQL> commit;
Commit complete.
SQL> SELECT * FROM range_part;
PROF_HISTORY_ID PERSON_ID ORGANIZATION_ID RECORD_DATE
1 1 1 31-AUG-2007 05:53:22
2 2 2 25-AUG-2008 05:53:22
3 3 3 21-FEB-2009 05:53:22
4 4 4 20-AUG-2009 05:53:22
SQL> SELECT * FROM range_part PARTITION(yr7);
PROF_HISTORY_ID PERSON_ID ORGANIZATION_ID RECORD_DATE
1 1 1 31-AUG-2007 05:53:22
SQL> alter table range_part drop partition yr7;
Table altered.
SQL> SELECT * FROM range_part PARTITION(yr7);
SELECT * FROM range_part PARTITION(yr7)
ERROR at line 1:
ORA-02149: Specified partition does not exist
SQL> SELECT * FROM range_part;
PROF_HISTORY_ID PERSON_ID ORGANIZATION_ID RECORD_DATE
2 2 2 25-AUG-2008 05:53:22
3 3 3 21-FEB-2009 05:53:22
4 4 4 20-AUG-2009 05:53:22

BW Statistics: Deleting Data from InfoCubes.

Hi,
I want to see data in BW Statistics: Deleting Data from InfoCubes.
I am working on BI 7.
I have set the infoprovider in Tcode RSDDSTAT.Marked 2 Infocube statistics ( X) and OLAP(2).
Already activated the BI Statistics.
I am deleting data from one of the cube . But when I go to cube 0BWTC_C11(BW Statistics: Deleting Data from InfoCubes)
It is not showing any data .
I can't see any data in RSDDSTATDELE table also
Do I need to do any other setting ? Am I missing any steps?
I need to dislay the log for deleted request /deleted data ?
I need to display the log for deleted infoobject/infopackage also? Where can i get this ?
Pls guide .
Regards
Nilesh

Hi Venkat,
I can not able to see in the report also . I have tried 0BWTC_C10/0BWTC_C10_Q251 to 254.
Whenever I am doing to delete it individullay it goes to table SDDSTATDELE .But whenever I am deleting whole data from cube or request ID it is not updating table RSDDSTATDELE.( which is further used to get data )
I got this from SAP help .
The characteristic can have the following characteristic values C,N,D and T:
C (Choose): The system automatically chooses the best delete mode. This is N or D.
N (Create New): If over 10% of an InfoCubes data records are to be deleted, the system replaces the InfoCube fact table with a table with data records that are not to be deleted.
If you want to delete more than 10% of the records, the system creates a new table, copies the data records you want to keep to the new table, deletes the old table and then renames the new table.
D (Delete): If you want to delete less than 10% of the data records, the system deletes these individual records directly from the InfoCube fact table.
T (Truncate): If you want to delete all data records, the system deletes all data records from the tables, but retains the tables in the database.
So how to see these records? I am doing full upload to cube 0BWTC_C11(BW Statistics: Deleting Data from InfoCubes).
Before this do I need to extract data for other CUBE also.
Pls suggest .
Regards
Nilesh

Open HUB ( SAP BW ) to SAP HANA through DB Connection data loading , Delete data from table option is not working Please help any one from this forum

Issue:
I have SAP BW system and SAP HANA System
SAP BW to SAP HANA connecting through a DB Connection (named HANA)
Whenever I created any Open Hub as Destination like DB Table with the help of DB Connection, table will be created at HANA Schema level ( L_F50800_D )
Executed the Open Hub service without checking DELETING Data from table option
Data loaded with 16 Records from BW to HANA same
Second time again executed from BW to HANA now 32 records came ( it is going to append )
Executed the Open Hub service with checking DELETING Data from table option
Now am getting short Dump DBIF_RSQL_TABLE_KNOWN getting
If checking in SAP BW system tio SAP BW system it is working fine ..
will this option supports through DB Connection or not ?
Please follow the attachemnet along with this discussion and help me to resolve how ?
From
Santhosh Kumar

Hi Ramanjaneyulu ,
First of all thanks for the reply ,
Here the issue is At OH level ( Definition Level - DESTINATION TAB and FIELD DEFINITION )
in that there is check box i have selected already that is what my issue even though selected also
not performing the deletion from target level .
SAP BW - to SAP HANA via DBC connection
1. first time from BW suppose 16 records - Dtp Executed -loaded up to HANA - 16 same
2. second time again executed from BW - now hana side appaended means 16+16 = 32
3. so that i used to select the check box at OH level like Deleting data from table
4. Now excuted the DTP it throws an Short Dump - DBIF_RSQL_TABLE_KNOWN
Now please tell me how to resolve this ? will this option is applicable for HANA mean to say like , deleting data from table option ...
Thanks
Santhosh Kumar

Update/insert/delete data from xcelsius to Database via web service

Hi,
I need to create dashboard that go function can update/insert/delete data send to Database thru web services, as i know got 2 xcelsius add-on software which support those of function InfoBurst and flynet 
InfoBurst
http://www.infosol.com/azbocug/minutes/4-Writeback%20to%20a%20Database%20with%20Xcelsius.pdf
flynet 
http://www.flynetviewer.com/public/community/Blogs/FlynetXcelsiusServerUser/default.aspx
Except this 2 purchase add-on xcelsius, any other solution ?
Maybe need to write some in MSSQL or C# programming which enable insert, update, delete ...etc ?
*note: i not use Xcelsius Engage Server , i use Xcelsius Engage only
thanks,
regards
s1
Edited by: Leong Pui Kee on Mar 1, 2011 6:06 AM

Hi,
As of now in Xcelsius/Dashboard Design there is no feature or functionality to insert/update/delete data from database.
Solution:
Create a Web service in let’s say C# or Java, which will perform insert/update/delete operation.
In Xcelsius add Web Service connection and user above web service.
Xcelsius Web Service connection provides option to pass input values to a Web Service (Input Pane) and get the result (Output values pane).
We can pass values to be written to the database as a input to Web Service via Web Service connection from Xcelsius and write data to the database.
Note:
Performing delete operation from Xcelsius Dashboard could be risky and may delete important data from database. I would not prefer giving delete option/functionality in Xcelsius dashboard.
Hope this helps!
Thank you.
Regards,
Vinay Mhaske

Delete data from archive server

Hello,
we have following question : How do you delete data from archive server which has passed the retention time and need to be removed from archive server.
Have you any ideas?
Thanks,
Stefan

Hi Planung,
For deletion of data SARA transaction is used. Also deletion indicator is required to set for the documents which you are not using. Use the bapi BAPI_DOCUMENT_DELETE for deleting the documents which are set with deletion indicator.
I hope this will resolve the query.
Regards,
Ravindra

Delete data from DSO only with a part of the key

Hi experts,
I have a DSO with 9 key fields and i want to delete some entrys. Our source system only provides 2 fields of the key. My problem is, that the BI is not able to delete from DSO unless I have the full key.
Now I want to get the rest of the key fields from the active table of the DSO. Can sombody help me please with the ABAP Code? Or is there another possibility?
I already found this thred in SDN but this is for BW 3.5:
Delete data from ODS with only part of the key
Thanks
Ralf

Ralf,
the thread pointed out by you is for passing deletion entries to the DSO / target using the deletion entries .. namely recordmode = D.
Are you looking at deleting data from the DSO as a one time activity or you want to handle the same using a start / end routine ...? and pass deletion entries to other data targets which get the data from this DSO ?
Arun

How to delete data from the table PA0007

Hi Friends,
Thank you for your kindly help.
When I upload data to infotype 0007(planed working time),
there is something wrong with the infotype 2011. So I want
to delete the data of infotype 0007. While using the program RPUREOPN to delete the data, the system will say:0007 cannot be deleted because of time constraint 1/A.
Now how can I delete the data from table PA0007?
Pls help me urgently.
Best wishes
Anne

Hi Sikindar,
Thank you for your help.
There is another question. There are five clients (Client 300,310,320,330,350) in my HR DEV system. I just want to delete the data of infotype 0007 in client 350. When I change the the time constraint and delete the data in client 350, the data of infotype 0007 in other clients will be safe or not?
Thank you again for your help!
Best wishes
Anne

Unable to Delete Data from PSA

Hi Experts,
I have a process chain which delete data from PSA on weekly basis . it running good . Since one month one of data target PSA data not deleting.
it gives me error like DDL time(___1): .........2 milliseconds
Delete request REQU_03RM2LOJ284N3GLM7Q574WLAO from PSA 8Z0MM_O39_OA: Error - subrc: 2
When i am tring to delete manually it gives me above error only.
I used programme (RSAR_PSA_CLEANUP_DIRECTORY)
for deleteting PSA Data this programme gives me errors request already deleted from data base. But still those request available when i am looking into PSA data.
it's happen only quality system not in the Production.
Kind Regards,
ve.

Hi Srinath,
when i am looking into system there is no programeme with name(SAP_PSA_ZEROCORREC) But another programme RSAR_PSA_CLEANUP_DIRECTORY is available i tried with these programme for deleting PSA it gives me error like request deleted from database.
But it gives me an error indicator only.
i am tried to delete manually by selectiong those request from PSA it gives me error DDL Time (______1) 2 milliseconds.
Kind Regards,
ve.

How to extract data from BPC InfoCube via ABAP program?

Hi experts!!
I tried to extract data from a BPC InfoCube via ABAP program, but I did'n have succeed.
I used the function 'RSDRI_INFOPROV_READ' to extract data from standard InfoCubes such as '0COPC_C07' and it run OK! However, when I change the InfoCube name to '/CPMB/WAIX8NE' (BPC InfoCube), everything goes wrong...
Is there any difference between extracting data from BPC and standard InfoCubes?
Thank you all!

Moderator message - Welcome to SCN.
But please do not cross and duplicate post.
Thread locked.
Rob

Deleting data from SID Table

Hi,
I have deleted master data of an info object but it does not remove all the data from the SID table.
I have selected with SID's option but not all data was removed.
I am getting the error below when transporting
"SID Table /BIC/ S2QKHITIND Contains Data : Characteristic ZQKHITIND Cannot be activated. "
What needs to be done to get the charecteristic activated.
Thanks
James

Hi Selva,
Thank you for the info. I have deleted data from all the infoproviders but still get the message
The system is unable to delete all the master data as, because some of it is still in use. (See log:
Object RSDMD, sub-object MD_DEL )
Do you want to delete the data records that are no longer in use?
What does this mean. is it due to the query open in some place or something else.
While I am not able to delete the SID table entries as the delete is not active. Please help.
Thanks
James

Deleting data from an Infocube in BW using ABAP program?

Similar Messages

Maybe you are looking for