Deleting data from memory

Hi,
I am using a Enhancement for my requirement. The enhancement
contains 2 Function exits., FE1 & FE2.
In FE2, I export data in 'ABC' to memory and In FE1 I import data in
memory to a variable 'XYZ' from memory.After importing,I delete the memory area.
Everything works fne till here.
But, suppose in a certain scenario after importing memory to variable 'XYZ' from memory,
before I delete the memory area due to some exception the program stops in the middle.
Now, again when I start the same process, I find my old data in the memory.
This is causing me a lot of headache. Agreed, I use a memory area, I need to delete it to make sure evrything runs smoothly in
future scenarios.
Right now am using database indexes as follows:--
export it to database indx(mm) id 'ZABC'.
import it from database indx(mm) id 'ZABC'.
delete from database indx(mm) id 'ZABC'.
Are there any means of using memory areas for storage of my data ,
so that when I start a new process the memory area which I used earlier should be freed by itself autmatically
and start afresh, even if I didnt delete the memory area earlier.
Thanks in advance,
Shivaa...

Hi,
You can use memory ids for storing variables or even internal tables. The syntax for that would be
export p1 = gt_mara to memory id 'ZABC'.
and import p1 = gt_mara from memory id 'ZABC'.
No need to declare p1 anywhere.
and when ur work is done.
free memory id 'ZABC' which will clear the value. ( free the memory )
Edited by: Kshitijsaxena on Aug 20, 2009 5:54 PM

Similar Messages

Error While Deleting Data From ODS

Hi all,
We are getting short dump while deleting data from a perticular ODS.
Part of short dump is--
trigger Location of Runtime Error
   Program                                 SAPLRSAC
   Include                                 LRSACU75
   Row                                     535
   Module type                             (FUNCTION)
   Module Name                             RSAR_TRANSTRUCTURE_ACTIVATE
help is desperately required
Regards
Srini--

try to activate InfoSource and later delete data.
Check if all ODS related objects are consistent and active.
also pls attached the whole dump for more clarity if this does not work.

Error while deleting data from a write optimized DSO using a Process Chain?

Dear Bwers,
I am facing a strange error while using process chains to delete data from data target which is a write optimized DSO. The process shows as failed but the data gets deleted in the DSO. The error message is as below. Did anybody have a similar problem? Any suggestions.
Thanks
Raj
Error while deleting content of InfoCube/DataStore object ZLSD_G03
Message no. RSDODSO153

Please, check if you get any short dump in ST22 related to this issue.

Open HUB ( SAP BW ) to SAP HANA through DB Connection data loading , Delete data from table option is not working Please help any one from this forum

Issue:
I have SAP BW system and SAP HANA System
SAP BW to SAP HANA connecting through a DB Connection (named HANA)
Whenever I created any Open Hub as Destination like DB Table with the help of DB Connection, table will be created at HANA Schema level ( L_F50800_D )
Executed the Open Hub service without checking DELETING Data from table option
Data loaded with 16 Records from BW to HANA same
Second time again executed from BW to HANA now 32 records came ( it is going to append )
Executed the Open Hub service with checking DELETING Data from table option
Now am getting short Dump DBIF_RSQL_TABLE_KNOWN getting
If checking in SAP BW system tio SAP BW system it is working fine ..
will this option supports through DB Connection or not ?
Please follow the attachemnet along with this discussion and help me to resolve how ?
From
Santhosh Kumar

Hi Ramanjaneyulu ,
First of all thanks for the reply ,
Here the issue is At OH level ( Definition Level - DESTINATION TAB and FIELD DEFINITION )
in that there is check box i have selected already that is what my issue even though selected also
not performing the deletion from target level .
SAP BW - to SAP HANA via DBC connection
1. first time from BW suppose 16 records - Dtp Executed -loaded up to HANA - 16 same
2. second time again executed from BW - now hana side appaended means 16+16 = 32
3. so that i used to select the check box at OH level like Deleting data from table
4. Now excuted the DTP it throws an Short Dump - DBIF_RSQL_TABLE_KNOWN
Now please tell me how to resolve this ? will this option is applicable for HANA mean to say like , deleting data from table option ...
Thanks
Santhosh Kumar

Update/insert/delete data from xcelsius to Database via web service

Hi,
I need to create dashboard that go function can update/insert/delete data send to Database thru web services, as i know got 2 xcelsius add-on software which support those of function InfoBurst and flynet 
InfoBurst
http://www.infosol.com/azbocug/minutes/4-Writeback%20to%20a%20Database%20with%20Xcelsius.pdf
flynet 
http://www.flynetviewer.com/public/community/Blogs/FlynetXcelsiusServerUser/default.aspx
Except this 2 purchase add-on xcelsius, any other solution ?
Maybe need to write some in MSSQL or C# programming which enable insert, update, delete ...etc ?
*note: i not use Xcelsius Engage Server , i use Xcelsius Engage only
thanks,
regards
s1
Edited by: Leong Pui Kee on Mar 1, 2011 6:06 AM

Hi,
As of now in Xcelsius/Dashboard Design there is no feature or functionality to insert/update/delete data from database.
Solution:
Create a Web service in let’s say C# or Java, which will perform insert/update/delete operation.
In Xcelsius add Web Service connection and user above web service.
Xcelsius Web Service connection provides option to pass input values to a Web Service (Input Pane) and get the result (Output values pane).
We can pass values to be written to the database as a input to Web Service via Web Service connection from Xcelsius and write data to the database.
Note:
Performing delete operation from Xcelsius Dashboard could be risky and may delete important data from database. I would not prefer giving delete option/functionality in Xcelsius dashboard.
Hope this helps!
Thank you.
Regards,
Vinay Mhaske

Delete data from archive server

Hello,
we have following question : How do you delete data from archive server which has passed the retention time and need to be removed from archive server.
Have you any ideas?
Thanks,
Stefan

Hi Planung,
For deletion of data SARA transaction is used. Also deletion indicator is required to set for the documents which you are not using. Use the bapi BAPI_DOCUMENT_DELETE for deleting the documents which are set with deletion indicator.
I hope this will resolve the query.
Regards,
Ravindra

Delete data from DSO only with a part of the key

Hi experts,
I have a DSO with 9 key fields and i want to delete some entrys. Our source system only provides 2 fields of the key. My problem is, that the BI is not able to delete from DSO unless I have the full key.
Now I want to get the rest of the key fields from the active table of the DSO. Can sombody help me please with the ABAP Code? Or is there another possibility?
I already found this thred in SDN but this is for BW 3.5:
Delete data from ODS with only part of the key
Thanks
Ralf

Ralf,
the thread pointed out by you is for passing deletion entries to the DSO / target using the deletion entries .. namely recordmode = D.
Are you looking at deleting data from the DSO as a one time activity or you want to handle the same using a start / end routine ...? and pass deletion entries to other data targets which get the data from this DSO ?
Arun

Unable to Delete Data from PSA

Hi Experts,
I have a process chain which delete data from PSA on weekly basis . it running good . Since one month one of data target PSA data not deleting.
it gives me error like DDL time(___1): .........2 milliseconds
Delete request REQU_03RM2LOJ284N3GLM7Q574WLAO from PSA 8Z0MM_O39_OA: Error - subrc: 2
When i am tring to delete manually it gives me above error only.
I used programme (RSAR_PSA_CLEANUP_DIRECTORY)
for deleteting PSA Data this programme gives me errors request already deleted from data base. But still those request available when i am looking into PSA data.
it's happen only quality system not in the Production.
Kind Regards,
ve.

Hi Srinath,
when i am looking into system there is no programeme with name(SAP_PSA_ZEROCORREC) But another programme RSAR_PSA_CLEANUP_DIRECTORY is available i tried with these programme for deleting PSA it gives me error like request deleted from database.
But it gives me an error indicator only.
i am tried to delete manually by selectiong those request from PSA it gives me error DDL Time (______1) 2 milliseconds.
Kind Regards,
ve.

Unable to delete data from a partition

Hi,
Unable to delete data from a partition
I am using the command as:
ALTER TABLE TEST DROP PARTITION DATE_20090820090000
Its giving 0 rows deleted.Bu there are 200 rows for the Partition.
The partition is getting deleted but the data remains.
I want a command where the data in the partition also to be deleted along with partition.
Any help will be needful for me

SQL> CREATE TABLE range_part (
prof_history_id NUMBER(10),
person_id NUMBER(10) NOT NULL,
organization_id NUMBER(10) NOT NULL,
record_date DATE NOT NULL)
PARTITION BY RANGE (record_date) (
PARTITION yr0 VALUES LESS THAN (TO_DATE('01-JAN-2007','DD-MON-YYYY'))
PARTITION yr7 VALUES LESS THAN (TO_DATE('01-JAN-2008','DD-MON-YYYY'))
PARTITION yr8 VALUES LESS THAN (TO_DATE('01-JAN-2009','DD-MON-YYYY'))
PARTITION yr9 VALUES LESS THAN (MAXVALUE) );
Table created.
SQL> INSERT INTO range_part VALUES (1, 1, 1, SYSDATE-720);
INSERT INTO range_part VALUES (2, 2, 2, SYSDATE-360);
INSERT INTO range_part VALUES (3, 3, 3, SYSDATE-180);
INSERT INTO range_part VALUES (4, 4, 4, SYSDATE);
1 row created.
SQL>
1 row created.
SQL>
1 row created.
SQL>
1 row created.
SQL>
SQL> commit;
Commit complete.
SQL> SELECT * FROM range_part;
PROF_HISTORY_ID PERSON_ID ORGANIZATION_ID RECORD_DATE
1 1 1 31-AUG-2007 05:53:22
2 2 2 25-AUG-2008 05:53:22
3 3 3 21-FEB-2009 05:53:22
4 4 4 20-AUG-2009 05:53:22
SQL> SELECT * FROM range_part PARTITION(yr7);
PROF_HISTORY_ID PERSON_ID ORGANIZATION_ID RECORD_DATE
1 1 1 31-AUG-2007 05:53:22
SQL> alter table range_part drop partition yr7;
Table altered.
SQL> SELECT * FROM range_part PARTITION(yr7);
SELECT * FROM range_part PARTITION(yr7)
ERROR at line 1:
ORA-02149: Specified partition does not exist
SQL> SELECT * FROM range_part;
PROF_HISTORY_ID PERSON_ID ORGANIZATION_ID RECORD_DATE
2 2 2 25-AUG-2008 05:53:22
3 3 3 21-FEB-2009 05:53:22
4 4 4 20-AUG-2009 05:53:22

Problem with BTE and FI-parking- no data from memory ID to ABAP

Hi Experts,
I have a scenario in Business Workflow where I want to catch the data(BKPF & BSEG) after SAP transaction processing - event is to change parked FI-document with FBV2. I´m trying to use BTE to receive the data after processing transaction.
All BTE steps seems to be activated - because I can debug my functions when processing FBV2 - but I cannot reach any data into my coding after processing.
I have created my project in BF24:
ZXXX Testing: WF-memory ID
I have also linked few FI-events to my BTE interface funtion in BF34:
00001130 ZXXX ZXXX_FIPP_CHANGE_BTE
00002213 ZXXX ZXXX_FIPP_CHANGE_BTE
00002217 ZXXX ZXXX_FIPP_CHANGE_BTE
My BTE function ZXXX_FIPP_CHANGE_BTE is as following:
DATA: memid(15) VALUE 'ZXXX_2217'.
*Initialize
CLEAR: t_vbkpf,
t_vbsegs.
FREE MEMORY ID 'ZXXX_2217'.
*Backtracking of BTE
EXPORT t_vbkpf
t_vbsegs
TO MEMORY ID memid.
ENDFUNCTION.
I have also created funtion to call FBV2:
data: memid(15) value 'ZXXX_2217'.
CALL TRANSACTION 'FBV2'.
*Import memory of BTE
IMPORT t_vbkpf
t_vbsegs
FROM MEMORY ID memid.
*Free memory id
FREE MEMORY ID memid.
When I set a breakpoint to both of the functions and I execute FBV2 I reach the breakpoints. Problem is that the data is not passed from memid 'ZXXX_2217' into function after FBV2(this syntax: IMPORT t_vbkpf t_vbsegs FROM MEMORY ID memid.)
What could be missing. So both functions are called but NO DATA is passed from memory ID to my internal tables? This seems to be a problem with memory ID´s. Also in my BTE function ZXXX_FIPP_CHANGE_BTE I receive a sy-subrc value 4 when executing syntax "FREE MEMORY ID 'ZXXX_2217'. ".
All hints appreciated,
Jani

Hi Ramki,
I must be frustrating You with these stupid questions... You have already supported me hugely to get more famailiar with BTE. For example not to commit in BTE etc. Big thanks for that!
In all cases when I have tested my project in BF24 has been always active; and yes I have changed the pre. posted document always to trigger the BTE.
I still have a problem. I copied all customizing and coding into other system - with same dissapointing results. Let me describe this once more:
My entry in BF24:
Product: ZBE
Text: Jani testing
RFC destination:
Active: X
My entry in BF34:
Event: 00002214
Product: ZBE
Ctr:
Appl:
Function module: ZBE_BTE
My BTE function:
 DATA: memid(15) VALUE 'ZBE_BTE2214'.
DATA: t_vbkpf LIKE fvbkpf OCCURS 0 WITH HEADER LINE.
FREE MEMORY ID memid.
EXPORT t_vbkpf TO MEMORY ID memid.
And the function ZBE_BTE_EXECUTE where I call FBV2:
 DATA: memid(15) VALUE 'ZBE_BTE2214'.
DATA: t_vbkpf LIKE fvbkpf OCCURS 0 WITH HEADER LINE.
CALL TRANSACTION 'FBV2'.
IMPORT t_vbkpf FROM MEMORY ID memid.
FREE MEMORY ID memid.
When I process my function ZBE_BTE_EXECUTE - and I have added a breakpoint into ZBE_BTE - for FBV2 call it does not reach the breakpoint in ZBE_BTE at all! This occurs when using event linkage 00002214! And I do execute a real change to parked document.
But if I change the entry in BF34 to be linked for event 00002217 or 00002218 process reaches my breakpoint in BTE function ZBE_BTE! But in these cases also, it does not import the data after transaction call in function ZBE_BTE_EXECUTE. When I continue debugging the coding in BTE function ZBE_BTE further into SAP-coding, I can see that my internal table t_vbkpf is filled. But when I leave SAP-coding when FBV2 is completed and return to ZBE_BTE_EXECUTE - where t_vbkpf should be filled from memory id - t_vbkpf is empty!
Again as a conclusion in this system:
For BTE event 00002214 this locig does not work at all. For events 00002217 and 00002218 it does get activated, but does not bring any data from memory ID into my abap. Strangest this is that I use absolutely same kind of coding that You.
Can You see if I have to fill those empty fields( Ctr. & Appl.) in my BF34 customizing? Or is some other customizing action missing?
Br,
Jani

Deleting data from SID Table

Hi,
I have deleted master data of an info object but it does not remove all the data from the SID table.
I have selected with SID's option but not all data was removed.
I am getting the error below when transporting
"SID Table /BIC/ S2QKHITIND Contains Data : Characteristic ZQKHITIND Cannot be activated. "
What needs to be done to get the charecteristic activated.
Thanks
James

Hi Selva,
Thank you for the info. I have deleted data from all the infoproviders but still get the message
The system is unable to delete all the master data as, because some of it is still in use. (See log:
Object RSDMD, sub-object MD_DEL )
Do you want to delete the data records that are no longer in use?
What does this mean. is it due to the query open in some place or something else.
While I am not able to delete the SID table entries as the delete is not active. Please help.
Thanks
James

Deleting data from a cube

Hi,
I added a info object to a dimension in a cube. now i want to delete the info object from the cube. But since the cube has data in it, i cannot do it unless i delete all the data from the cube. When i select 'delete data', i'm given 2 options, delete fact table only and 2nd option delete fact table and dimension table. what is the difference between the two and what option should i select.
i then need to load the cube back from ODS. the cude right now is setup in the proce4ss chain to do a delta load every day. would this be affected after i delete the data and load it again from the ODS?
Thanks
Sameer

The way I understand your question is...
1) You have data in the cube from which you have to remove an infoobject
Ans: To acheive this, you have to delete the data from the cube
2) You have deleted the data and then deleted the IO, activated the cube and the update rules from the ODS which feeds this cube
3) Now you have to reload the deleted data from the ODS. But you already did an init and you are loading delta's from this ODS to the cube through process chain.
Ans: As you've already deleted the whole data from the cube, do a full load from the ODS (you can do this even when delta initialization is done) to your cube by creating a new infopackage under the export datasource of the ODS. This will capture all the records from the ODS. Then to be on the safe side so as not to load any duplicate records...go the infopackage that you've used to do the full load (you can even create a new Info package)...SCHEDULER -> Initilization options for source system -> Delete the existing INIT -> Then do Init again...
Leave the delta infopackage as is and let the process chain take care of the deltas from now on...
Hope this helps. Let me know I am missing something here...

Deleting data from a partition in a table

There is a requirement to delete data from a particular partition in our PROD Env.
Please let me know the syntax for the same.
Also is it possible to truncate a partition?
The DB version is 10.2.0.4 and OS is Solaris 10
Regards,
Narayan
Edited by: user7202581 on Apr 14, 2013 12:11 AM

Hi, You can use the following Syntex.
-- For Truncate
ALTER TABLE <table_name> TRUNCATE PARTITION <Partition_name>;
-- For Delete
DELETE FROM <table_name> PARTITION <partition_name>;

Deleting data from a table where there are no indexes on the table

Hi
We have one interface program for one time process.When I was testing the process it was taking too much time to load the data around 1000 records.
it happens in 2 steps
1 puts into stage table
2 puts into base table
in the process/package I have delete statement that deletes data from stage table before each process.
Stage table did not have any indexes but the base table has(obvisiosly)
any idea?
please help me on this.
Thanks,
Y

Hi,
Please post the application/database details along with the OS.
Is this interface program a seeded or custom one?
Please enable trace on this concurrent program as per (Note: 296559.1 - FAQ: Common Tracing Techniques within the Oracle Applications 11i/R12) and generate the TKPROF to find out why it takes that long to load/delete the data.
Thanks,
Hussein

Deleting data from text files

Hi there,
I am having a real battle trying to delete data from a text file I am using. There seems to be this giant cloud with Java, where there is no real easy way to delete text from a file??
I have a JFrame with two textfields on it where you enter the username and pcname. There is a OK button once you have entered those details.
On action event I would like those two details, to be removed from the text file that has been read in.
I have a text file like this:
bob
pc1
bill
pc2
The data above gets written no problem, one at at a time using the below.
File f = new File("\\c:\\filename.txt");
String strToWrite;
try
FileOutputStream fstr = new FileOutputStream(f);
strToWrite = username1+ '\r'+'\n' ;
byte[] bytes = strToWrite.getBytes(); fstr.write(bytes);
strToWrite = pcname1 + '\r'+'\n' ;
byte[] bytes2 = strToWrite.getBytes(); fstr.write(bytes2);
strToWrite = username2+ '\r' +'\n' ;
byte[] bytes3 = strToWrite.getBytes(); fstr.write(bytes3);
strToWrite = pcname2 + '\r'+'\n' ;
byte[] bytes4 = strToWrite.getBytes(); fstr.write(bytes4);
catch (IOException e)
System.out.println("Error -- " + e.toString());
To read them back in I have made the follwoing:
BufferedReader br= null;
Count = 0;
try
br = new BufferedReader(new InputStreamReader(new FileInputStream("\\c:\\filename.txt")));
String s = "";
while((s=br.readLine()) != null )
Count = 1;
     //System.out.println("Data is " + s);
     inboundtext = s;
     if ( Count == 1 )
break;
while((s=br.readLine()) != null )
//System.out.println("Data is " + s);
inboundtext = s;
Count = 2;
if ( Count == 2 )
break;
catch(IOException ie)
finally
try
     if(br!=null) br.close();
catch(Exception e)
Now the above I know, is reading each line of the text file one at a time.
Now what I would like is that when the text that we got from the textfields, using getText(), be removed from the file without destroying the rest of the records in there? Why is it so easy to add and replace files, but not do any deleting from them?
please help!!

sorry, FileOutputStream fstr = new FileOutputStream(f);
should be FileOutputStream fstr = new FileOutputStream(f, true);

Deleting data from memory

Similar Messages

Maybe you are looking for