Deleting data from multiple cells

I am new to Numbers. I have managed to complete our club accounts for 2009. Then I have saved them As and renamed the project for 2010.
How do I delete all data from the cells, leaving all the formulas in place, so that I can enter new data for 2010.
Mike

Select the cells with data, press delete.
Select a group of cells in a contiguous block by clicking in the top left cell of the block, then dragging down and right to select the rest of the cells in that block.
Select non-contiguous cells by clicking in the first cell then holding the command key and clicking other cells to ad them to the selection.
Take care that you do not add cells containing formulas to the selection as you cannot lock individual cells to prevent content deletion.
Once you have stripped the old data from the document, I would suggest saving it as a Template. Then you will be able to simply open the template each year and start adding that year's data.
Regards,
Barry

Similar Messages

Delete records from multiple table

Hi,
I need to delete records from multiple tables using a single delete statement. Is it possible ? If so please let me know the procedure.
Kindly Help.
Thanks,
Alexander.

Hi Tim,
Syntax of DELETE statement does not allow for multiple tables to be specified in this way. Infact, none of the DMLs allow you to specify table names like this.
Technically, there are other ways of deleting from multiple tables with one statement.
1. "Use a trigger":
What was probably meant by this is that you have a driving-table on which you create a on-delete trigger. In this trigger, you write the logic for deleting from other tables that you want to delete from.
This does mean a one-time effort of writing the trigger. But the actual DML operation of deleting from all the tables would be simply triggered by a delete on driving-table.
2. Dynamic SQL:
Write a PL/SQL code to open a cursor with table-names from which you want the data to be deleted from. In the cursor-for loop, write a dynamic SQL using the table-name to delete from that table.
3. Using Foreign-Key constraint with Cascade-Delete:
This I feel is a more 'cleaner' way of doing this.
Having to delete data from multiple tables means that there is some kind of parent-child relationship between your tables. These relationships can be implemented in database using foreign-key constraints. While creating foreign-key constraint give the 'on delete cascade' clause to ensure that whenever data is deleted from parent-table, its dependent data is deleted from child-table.
Using foreign-key constraint you can create a heirarchy of parent-child relationships and still your DELETE would be simple as you would only have to delete from parent-table.
IMPORTANT: Implementing foreign-key constraints would also impact other DML operations that you should keep in mind.

Displaying data from multiple table/column

hello ..
anybody can help me how to diplaying data from multiple table/ column in PHP. TQ

Follow the "How do I SELECT, INSERT, UPDATE and DELETE data from PHP?" example from http://wiki.oracle.com/page/PHP+Oracle+FAQ and change the "select ..." query to your favourite join, e.g.
select country_name, region_name from countries, regions where countries.region_id = regions.region_id;

Loading data from multiple files to multiple tables

How should I approach on creating SSIS package to load data from multiple files to multiple tables. Also, Files will have data which might overlap so I might have to create stored procedure for it. Ex. 1st day file -data from au.1 - aug 10 and 2nd day
file might have data from aug.5 to aug 15. So I might have to look for max and min date and truncate table with in that date range.

thats ok. ForEachLoop would be able to iterate through the files. You can declare a variable inside loop to capture the filenames. Choose fully qualified as the option in loop
Then inside loop
1. Add execute sql task to delete overlapping data from the table. One question here is where will you get date from? Does it come inside filename?
2. Add a data flow task with file source pointing to file .For this add a suitable connection manager (Excel/Flat file etc) and map the connection string property to filename variable using expressions
3. Add a OLEDB Destination to point to table. You can use table or view from variable - fast load option and map to variable to make tablename dynamic and just set corresponding value for the variable to get correct tablename
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

Error While Deleting Data From ODS

Hi all,
We are getting short dump while deleting data from a perticular ODS.
Part of short dump is--
trigger Location of Runtime Error
   Program                                 SAPLRSAC
   Include                                 LRSACU75
   Row                                     535
   Module type                             (FUNCTION)
   Module Name                             RSAR_TRANSTRUCTURE_ACTIVATE
help is desperately required
Regards
Srini--

try to activate InfoSource and later delete data.
Check if all ODS related objects are consistent and active.
also pls attached the whole dump for more clarity if this does not work.

Error while deleting data from a write optimized DSO using a Process Chain?

Dear Bwers,
I am facing a strange error while using process chains to delete data from data target which is a write optimized DSO. The process shows as failed but the data gets deleted in the DSO. The error message is as below. Did anybody have a similar problem? Any suggestions.
Thanks
Raj
Error while deleting content of InfoCube/DataStore object ZLSD_G03
Message no. RSDODSO153

Please, check if you get any short dump in ST22 related to this issue.

Can we merge data from multiple sources in Hyperion Interactive Reporting ?

Hi Experts,
Can we merge data from multiple sources in Hyperion Interactive Reporting ?Example can we have a report based on DB2
Oracle,
Informix and Multidiemnsional Databases like DB2,MSOLAP,ESSBASE?
Thanks,
V

Yes, Each have their own Query and have some common dimension for the Results Sections to be joined together in a final query.
look in help for Creating Local Joins

Open HUB ( SAP BW ) to SAP HANA through DB Connection data loading , Delete data from table option is not working Please help any one from this forum

Issue:
I have SAP BW system and SAP HANA System
SAP BW to SAP HANA connecting through a DB Connection (named HANA)
Whenever I created any Open Hub as Destination like DB Table with the help of DB Connection, table will be created at HANA Schema level ( L_F50800_D )
Executed the Open Hub service without checking DELETING Data from table option
Data loaded with 16 Records from BW to HANA same
Second time again executed from BW to HANA now 32 records came ( it is going to append )
Executed the Open Hub service with checking DELETING Data from table option
Now am getting short Dump DBIF_RSQL_TABLE_KNOWN getting
If checking in SAP BW system tio SAP BW system it is working fine ..
will this option supports through DB Connection or not ?
Please follow the attachemnet along with this discussion and help me to resolve how ?
From
Santhosh Kumar

Hi Ramanjaneyulu ,
First of all thanks for the reply ,
Here the issue is At OH level ( Definition Level - DESTINATION TAB and FIELD DEFINITION )
in that there is check box i have selected already that is what my issue even though selected also
not performing the deletion from target level .
SAP BW - to SAP HANA via DBC connection
1. first time from BW suppose 16 records - Dtp Executed -loaded up to HANA - 16 same
2. second time again executed from BW - now hana side appaended means 16+16 = 32
3. so that i used to select the check box at OH level like Deleting data from table
4. Now excuted the DTP it throws an Short Dump - DBIF_RSQL_TABLE_KNOWN
Now please tell me how to resolve this ? will this option is applicable for HANA mean to say like , deleting data from table option ...
Thanks
Santhosh Kumar

Update/insert/delete data from xcelsius to Database via web service

Hi,
I need to create dashboard that go function can update/insert/delete data send to Database thru web services, as i know got 2 xcelsius add-on software which support those of function InfoBurst and flynet 
InfoBurst
http://www.infosol.com/azbocug/minutes/4-Writeback%20to%20a%20Database%20with%20Xcelsius.pdf
flynet 
http://www.flynetviewer.com/public/community/Blogs/FlynetXcelsiusServerUser/default.aspx
Except this 2 purchase add-on xcelsius, any other solution ?
Maybe need to write some in MSSQL or C# programming which enable insert, update, delete ...etc ?
*note: i not use Xcelsius Engage Server , i use Xcelsius Engage only
thanks,
regards
s1
Edited by: Leong Pui Kee on Mar 1, 2011 6:06 AM

Hi,
As of now in Xcelsius/Dashboard Design there is no feature or functionality to insert/update/delete data from database.
Solution:
Create a Web service in let’s say C# or Java, which will perform insert/update/delete operation.
In Xcelsius add Web Service connection and user above web service.
Xcelsius Web Service connection provides option to pass input values to a Web Service (Input Pane) and get the result (Output values pane).
We can pass values to be written to the database as a input to Web Service via Web Service connection from Xcelsius and write data to the database.
Note:
Performing delete operation from Xcelsius Dashboard could be risky and may delete important data from database. I would not prefer giving delete option/functionality in Xcelsius dashboard.
Hope this helps!
Thank you.
Regards,
Vinay Mhaske

Selecting data from Multiple Partitions in a single select stmt.

Hi all,
My Database is very large & my tables are partitioned.
My question is:
1) If my data is spread across multiple partitions, is there any way to select data from multiple partitions in a single query?
If we dont mention partition name also it works fine, but perofmance wise it will be very slow. (Using EXPLAIN PLAN)
(Note:I dont want to make use of Union concept, i want to do it in a single select statement)
For ex:
qry1.sql:
select empno from emp_trans partition (P012000)
This above query(qry1.sql) will work fine.
qry2.sql:
select empno from emp_trans partition (P012000,P022000)
The above query(qry2.sql) will return will return the following error:
ORA-00933: SQL command not properly ended
If anybody has any solution for this, pls mail me immediately.
Thanks in advance
bye
null

All my queries are dynamically generated. All my tables are also indexed partition wise based on date field. My question is, if i want to mention multiple partition names at the time of generating my query(select), then with parformance will be good. I have refered some books, inthat what they say is to use UNION concept, i dont want to use that, instead i want in a single select statement.
Thaks for ur reply
Bye
null

Display Data from multiple models in one table

Hi Experts,
Is it possible to display data from multiple models in one table smltnsly.
I have created a table dynamically.Now I would like to display data from multiple models... If this possible,can anyone give me a lead as to how to do it..
Regards
SU

Hi
Your Model Nodes be
Model1
---Output_Model1
Attrib1
Attrib2
Model2
---Output_model2
Attrib1
Attrib2
and the value node is
ValueNode
---Attrib1
---Attrib2
Now the coding.
int size;
IPrivate<ViewName>.IOutput_mode1Node node1 = wdContext.nodeOuptut_Model1();
IPrivate<ViewName>.IValueNodeElement elem;
size = node1.size();
for(int i=0; i<size; i++)
 elem = wdContext.createValueNodeElement();
 elem.setAttrib1( node1.getOutput_Model1ElementAt(i).getAttrib1() );
 elem.setAttrib2( node1.getOutput_Model1ElementAt(i).getAttrib2();
 wdContext.nodeValueNode().addElement( elem );
similar code for Model Node 2
Regards
Abhimanyu L

Display data from multiple document Libraries in List View Webpart

Hi All,
I want to display data from multiple document libraries into one list view webpart(custom i have created)
I went through the following link http://blogs.msdn.com/b/ramg/archive/2009/04/22/implementing-a-simple-cross-site-collection-list-view-webpart.aspx
but it tells to display only from one document library.
My motive behind displaying data in the list view webpart is to achieve the functionality of Check In ,Check Out and other OOB features.
With Regards,
Jaskaran Singh

Hi,
As there is no such OOTB feature, a workaround is to create a visual web part to gather items from libraries and implement functionalities like Check in, Check out files
in different libraries.
The links below will provide more details:
Create Visual Web Parts in SharePoint
2010
A demo about displaying list items in visual web part:
http://www.dotnetcodesg.com/Article/UploadFile/2/217/Web%20Part%20in%20SharePoint%20To%20Show%20All%20List%20and%20List%20Items.aspx
About the Check In and Check Out:
How to Check In a document programmatically
SPFile.CheckIn method
and SPFile.CheckOut method
Best regards
Patrick Liang
TechNet Community Support

How to get the data from multiple nodes to one table

Hi All,
How to get the data from multiple nodes to one table.examples nodes are like A B C D E relation also maintained
Regards,
Indra

HI Indra,
From Node A, get the values of the attributes as
lo_NodeA->GET_STATIC_ATTRIBUTES( IMPORTING STATIC_ATTRIBUTES = ls_attributesA ).
Similarily get all the node values from B, C, D and E.
Finally append all your ls records to the table.
Hope you are clear.
BR,
RAM.

Delete data from archive server

Hello,
we have following question : How do you delete data from archive server which has passed the retention time and need to be removed from archive server.
Have you any ideas?
Thanks,
Stefan

Hi Planung,
For deletion of data SARA transaction is used. Also deletion indicator is required to set for the documents which you are not using. Use the bapi BAPI_DOCUMENT_DELETE for deleting the documents which are set with deletion indicator.
I hope this will resolve the query.
Regards,
Ravindra

Delete data from DSO only with a part of the key

Hi experts,
I have a DSO with 9 key fields and i want to delete some entrys. Our source system only provides 2 fields of the key. My problem is, that the BI is not able to delete from DSO unless I have the full key.
Now I want to get the rest of the key fields from the active table of the DSO. Can sombody help me please with the ABAP Code? Or is there another possibility?
I already found this thred in SDN but this is for BW 3.5:
Delete data from ODS with only part of the key
Thanks
Ralf

Ralf,
the thread pointed out by you is for passing deletion entries to the DSO / target using the deletion entries .. namely recordmode = D.
Are you looking at deleting data from the DSO as a one time activity or you want to handle the same using a start / end routine ...? and pass deletion entries to other data targets which get the data from this DSO ?
Arun

Deleting data from multiple cells

Similar Messages

Maybe you are looking for