Deleting Enhancement Point

Hello Friends,
In Enhancement Implementation   /NFM/SD_SALES_BASIC in Method
IF_EX_BADI_SD_SALES_BASIC~HEADER_STATUS i have created a New Enhancement Spot
*{   INSERT         DEVK904735                                        1
ENHANCEMENT-POINT ZSALES1 SPOTS ZSALES1.
*}   INSERT
method IF_EX_BADI_SD_SALES_BASIC~HEADER_STATUS .
endmethod.
At the time of compilation it is giving the error.
I have tried to delete the enhancement through tcode se80 by giving Package name and under enhancement node but it gives me a message "Enhancement Spot is not Empty".
How can i activate or delete the above enhancement ?

hello , amit if u want to delete the enhancement point
in the menu bar go to edit then enhancement operations there is a undo option
just click on the enhancement point and edit>enhancementoperations>undo
or u can do from righ clicking on point and enahncments and then undo
hope thsi resolves ur problem

Similar Messages

SAP note - delete enhancement-point

hi,
I would like to implement a note ("992605"). In this note there were some correction instructions (e.g. "ES_MRYF_COMMON_ROUTINES_ALV"; Objecttype ENHS). If I open the link to the object (click on objectname), there are no details what to do. Now what should I do?
If I open the object-link to "MRYF_COMMON_ROUTINES_ALV" in the note, I get the information to delete following line (include MRYF_COMMON_ROUTINES_ALV) :
ENHANCEMENT-POINT MRYF_COMMON_ROUTINES_ALV_01 SPOTS ES_MRYF_COMMON_ROUTINES_ALV INCLUDE BOUND.
It's an enhancement-point which I can't delete because it's not modifiable (Info: ("Components of enhancements and sections cannot be modified"). What should I do?
Thanks Michael

Hello Michael,
Does the note state that you are supposed to perform this action manually? If not, then why are you not using SNOTE to have the note applied automatically to your system?
Just go to transaction SNOTE, download the note and then mark it and click implement note. That should do it.
Regards,
Michael

Use of Enhancement-point

Moderator message: do not post the same question twice in different forums. Your duplicate has been deleted.
Hi
I hv used enhancement point in my standard transections like MIRO,FBRA,FB08,FCH5 and some other
i have implemented implicit enhancement point to above transactions and all are working fine and as per the requirement
i m concern with only few things that :
    1-   Is it good to use enhancement point or to use user exit and badi ?
    2-   After using enhancement point as a in between hooks i m not violating and modifying the standard no ?
   3-   If someone raise an OSS message for some queries in related transaction will SAP gives support ?
Please help me onthis
Regards
rajan
Edited by: Matt on Dec 17, 2008 10:00 AM

Hi,
Make a habit of searching on SCN, you will get lot of threads for all your queries.
And adhere to rhe rules of engagement by not posting multiple questions in a single thread.

Enhancement-point in function module CO_FW_AFFW_POST

Hi there,
In SAP Standard FM CO_FW_AFFW_POST
I need to change the following code:
prot_upd_is_active = yx.
prot_del_is_active = yx.
* >>> To activate the writing of a protocol entry for <<<
* >>> deleted AFFW entries delete the following line <<<
CLEAR prot_del_is_active. "<<< DELETE FOR ACTIVATING PROTOCOL
* >>> To activate the writing of a protocol entry for <<<
* >>> modified AFFW entries delete the following line <<<
CLEAR prot_upd_is_active. "<<< DELETE FOR ACTIVATING PROTOCOL
I need to set the values (prot_upd_is_active,prot_del_is_active ) back to their original value (u201Cyxu201D, before CLEAR statements happens)
I do not want to modify SAP standard code.
IMPLICIT enhancement is no good to me, as the Points it allows are in all the wrong placesu2026
Iu2019m thinking I can create EXPLICIT enhancement using u201CEnhancement-Pointu201D.
Can this only be done at an existing u201CEnhancement-Pointu201D statement in the program?
(or can I put it directly after the last CLEAR statement)
Can you have more than one ACTIVE enhancement per ENHANCEMENT-POINT? (forums suggest you can u2013 I know you can only have 1 active u201CEnhancement Sectionu201D )
Any help/suggestions appreciated!
Thanks,
David

Hi Roy,
thanks for the quick response - will give that a shot and see how it goes.Will award forum points .
I'm presuming that my new enhancement spot will not have any effect on the code that currently exists at that enhancement-point?
Thanks,
David.

Inactivation of enhancement point

dear friends,
i have created two enhancement point in my program. i implemented both point separately. but now i want to inactivate one enhancement point. so could you tell me the right way for inactivate it.
another question i would like to ask you that how can i assign 2 or more spot to one enahancement point.
regatds,
sunil sharma

Hi Sunil,
place the cursor on enhancement editor, click on spiral icon again, next goto edit-> press on show implisit-enhancement -press on 'change enhancement ' just comment the code or delete it and activate it again.
you can not assign enhancement points: SAP will define enhancement points in some places only.
If you define your self, you may not get the objects or screen data, so you cann't do any validations on it.
Thank you
srinu

Import note - enhancement-point

hi,
I would like to implement a note ("992605"). In this note there were some correction instruction (e.g. "ES_MRYF_COMMON_ROUTINES_ALV"; Objecttype ENHS). If I open the link to the object (click on objectname), there are no details what to do. Now what should I do?
If I open the object-link to "MRYF_COMMON_ROUTINES_ALV" in the note, I get the information to delete following line:
ENHANCEMENT-POINT MRYF_COMMON_ROUTINES_ALV_01 SPOTS ES_MRYF_COMMON_ROUTINES_ALV INCLUDE BOUND.
It's an enhancement-point which I can't delete, because it's not modifiable. What should I do?
Thanks Michael

Hello Michael,
As this note is quite complex (it modifies ENHO and ENHS objects) why do you want to implement it manually? If you use the transaction SNOTE, it will be done automatically.
Please implement note 875986 first that corrects all the SNOTE problems.
Regards,
Walter

CRM Call List Save BADI / Enhancement Point

Hi
I need to perform some validations on Call List Save using TX CRMD_TM_CLDIST . I searched for a BADI which gets called when the call list is saved but could not find one .
Has anyone worked on a BADI which gets called when a call list is modified ?
Regards
Ajitabh

Hi
In the call list application there are individual operations some of which require a save and some do not for eg adding a user to the assignment block of a call list does not require a save button .
For this operation class CL_TM_CLM_ASSIGNMENT is used by the standard.
SAP has provided implicit enhancement points in each of the methods of this classs .These methods handle the individual operations for eg deleting an assignment,adding an assignment etc.
To identify the classes we did a trace of the operation(adding a new assignment,deleting an assignment etc etc). From the ST05 traces we identified the classes which were performing the various operations and then implemented the implicit enhancements in these methods to do our processing.
Hope this helps....
Ajitabh

Create Enhancement Point / Section ?

Hi,
I want to create a new enhancement point / section in a standard SAP code, how to create it. I need to create it in the code "SAPLMIGO".
regards,
Navneeth K.

Hello Navneeth,
Please be aware that this Enhancement Framework is available from netweaver2004s as i understood,or if the SAP Basis version is greater than 700
Create a composite enhancement spot
1.Select the package in which you want to create the enhancement spot.
2.Open the context menu and choose Create ® Enhancement ® Composite
Enhancement Spot.A dialog appears.
3.Specify a name and a short description.
Optionally, you can assign the new spot to an already existing composite enhancement spot.
4.Choose Activate to activate the new spot.
Create a subordinate composite enhancement spot
1. Open the desired package.
2. Select the composite enhancement spot to which your new subordinate composite spot will belong.
3.Open the context menu and choose Create ® Subordinate Composite Enhancement Point.
A dialog appears.
4.Specify a name and a short description.
5.Choose Activate to activate the new subordinate spot.
Result:
● The selected composite enhancement spot and its newly created subordinate one are displayed in the object list in a list form (not as a tree) on the same level.
● Choose the composite enhancement spot and select the Spot Composites tab to check whether the new subordinate composite is properly attached.
● The header of the new subordinate spot has to contain the name of the composite enhancement spot to which this subordinate is attached.
● Use a forward navigation to Navigate from parent to child and back.
Create a simple enhancement spot
1. Select the package in which you want to create the simple enhancement spot.
2.Open the context menu and choose Create ® Enhancement ® Enhancement Spot.
A dialog appears.
3.Specify a name and a short description.
Optionally, you can assign the new spot to an already existing composite enhancement spot.
4.Select the desired technology from the Technology list.
Currently it is only possible to create enhancement spots of type BAdI.
Source code plug-ins can only be created inside the editor, because they contain points and sections.
5.Choose Activate to activate the new simple enhancement spot.
Edit an enhancement spot
1.Select the package and expand it.
2.Expand the Enhancements node.
3.Expand the Enhancement Spot node.
4.Select the desired enhancement spot.
5.Choose Change from the context menu.
Choose Display if you only want to display the enhancement spot.
Delete an enhancement spot 1.Select the package and expand it.
2.Expand the Enhancements node.
3.Expand the Enhancement Spot node.
4.Select the desired enhancement spot.
5.Choose Delete from the context menu.
Additional informations:
Blog link on enhancement framework
/people/thomas.weiss/blog/2006/01/24/what-the-new-enhancement-framework-is-for-150-its-basic-structure-and-elements-for-beginners Part1
/people/thomas.weiss/blog/2006/03/15/the-new-enhancement-framework-part-2--what-else-you-need-to-know-before-building-an-enhancement Part2
/people/thomas.weiss/blog/2006/04/03/how-to-define-a-new-badi-within-the-enhancement-framework--part-3-of-the-series Part3
/people/thomas.weiss/blog/2006/04/18/how-to-implement-a-badi-and-how-to-use-a-filter--part-4-of-the-series-on-the-new-enhancement-framework Part4
/people/thomas.weiss/blog/2006/05/03/source-code-enhancements--part-5-of-the-series-on-the-new-enhancement-framework Part5
Pls check out the document for another set of notes on enhancements
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/bb54c452-0801-0010-0e84-a653307fc6fc
Hope it was of some help
Reward if useful
Regards
Byju

Sap support for standard prog. w/ custom implem of implicit enhanc.points

Hello,
since 1 year I've been confronted to SAP customers which WIDELY implement Implicit Enhancement Points (IEP).
I have been really surprised that my customers undoubtly think, if a problem occurs in a standard program where there are lots of IEP custom implementations, and if my customers estimate after investigation the problem comes from the standard part and not from the IEPs, they think that SAP support would help them to solve the issue.
Note: as a consequence, they created much more IEP in ECC 6 than they did in the past with R/3 old releases (via changes of the standard, aka repairs)!
What I think, is that SAP SUPPORT WOULDN'T HELP them as long as there is custom code (even within IEPs) in the standard program, even if there is only one IEP with one line (because it could change completely the standard algorithm, for example by emptying a global internal table)
So, I think the only way to get help from SAP is to deactivate these IEP implementations before requesting support. And so, the only solution to deactivate them, customers MUST assign IEP implementations to a package and then to a switch and then to a business function, so that they can deactivate it via switch framework.
The main concern is that my customers didn't create switch/business function, so they cannot react quickly if a problem happens in production : reproduce in test system, deactivate custom IEPs by switching off business function (it's what they didn't do), reproduce with full standard to determine problem comes from standard, request help from sap).
Could you share with me what is your approach about implementing IEPs, and maybe, is there somewhere a SAP documentation which explains that officially?
I hope I was clear.
Thank you very much for your kind help.
Best regards,
sandra rossi

I played around a bit with this (as I had never done it before) and also from what I have read, the intended option is the switch framework.
I guess as plan B you could have a virtual system or reliable test environment in which you can disable the enhancement and bring it back again via version management - but from what you have described (IEP deleting gobal variables, etc) this would also remove the "bug" and make the problem difficult to reproduce.
Perhaps the next best thing (unless someone has a better idea) is to inform your customers about neatly organizing their software developments using packages and switches.
To my knowledge, the syntax checks are also getting stricter in this area (as you may have noticed) and I hope that (for some of them) will throw errors one day during the development stage already.
Sorry, that does not help you much (but at least you read "the rules"
Cheers,
Julius
ps: A dirty way of doing it would be to run the program in the new debugger, and skip over the enhancement using the Go-To function. Unlike the classic debugger, the code inbetween does not need to be debugged. Ugly, but effective...
Edited by: Julius Bussche on Nov 10, 2008 9:13 PM

Medruck Enhancement-point

I have to make to multiple Sapscript changes to MEDRUCK for RFQ. I have copied the include LMEDRUCKTOP to LZSC_MEDRUCKTOP.
When I add new tables and data declaration in LZSC_MEDRUCKTOP, it give a message ENHANCEMENT POINT will be created for LMEDRUCKTOP_04. It does not allow me to delete the the line of code
ENHANCEMENT-POINT LMEDRUCKTOP_04 SPOTS ES_SAPLMEDRUCK STATIC.
What is enhancement-point and how can I proceed further ?
Thanks.

The enhancement spots are used to manage explicit enhancement options
Enhancement options are positions in Repository objects where enhancements can be made. These options are either explicitly defined (by the developer) or exist implicitly. Explicit enhancement options are generally defined in a central initial system. Enhancements are made in follow-on systems.
Explicit enhancement options can currently be defined by:
●     Explicitly flagging source code points or sections in ABAP programs. For an enhancement, these can be enhanced or replaced by source code plug-ins.
●     Including Business Add-Ins (BAdIs) in ABAP programs. These programs are then enhanced by object plug-ins with predefined interfaces.
Explicit enhancement options are managed by enhancement implementations
Currently, implicit enhancement options are:
●     Specific options in ABAP programs such as the end of the program which can be enhanced by source code plug-ins.
●     Parameter interfaces of function modules, which can be enhanced with parameters.
●     Attributes and parameter interfaces of global classes, which can be enhanced with attributes or parameters.
Implicit enhancement options always exist and do not require enhancement spots. They are also enhanced by enhancement implementations.
Incase if you want to delete the enhancement spot
After the program has been saved, the enhancement option is managed by the Enhancement Builder, and can only be deleted using the function Enhancements ® Remove Enhancement.
Pl follow the documentation link provided below for further info on Enhancement spots.
link

Difference between implicit and explicit enhancement points

Hi Folks,
I had learned many documents to findout the difference between explicit and implicit enhancement point.I got the theoritical knowledge on that but losing on the practical side..
Can anybody help me out with one real time scenario where the explicit enhancement points have been implemented and the step by step procedure to implement it..
Hoping for the positive response from you..
Regards,
Rohan.

Hi Rohan,
In implicit they are available at the beginning of subroutines defined in the standard reports.
Edit-> Enhancement operations->show implicit enhancement options.
This will highlight all the implicit enhancements in the report.
In Explicit enhancement we have two different types of enhancements -
Enhancement point and Enhancement section.
Enhancement point - SAP has some standard functionality defined for a report , but it may be required that you'll need to add your own code. In this case the code that you'll add will be executed along with the standard code.
Enhancement section - SAP has its standard functionality defines but it may not suit your requirement, in that case you may need to add your code and you'll need that code to be executed only. By this method the existing code is automatically commented and a copy of the same code is available to edit.
After executing the report only your code will be executed and the standard code will be bypassed.
For Practicle implementation, follow this link.
Link : [http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/bb54c452-0801-0010-0e84-a653307fc6fc]
i hope it will give you some clear picture....
Thanks.
Anurag

Enhancement points option: Function modules or BADI

Hi, I am on ECC 6.0 and I need to validate and set some requirement in customer sales area data when user input the document output message in Documents tab strip screen 7003 of sapmf02d in transaction XD01 or XD02.
I found that there is function module EXIT_SAPMF02D_001 that I probably can use to create an implicit enhancement point to validate table T_KNVD or I can use BADI customer_add_data. Can someone suggest which way is better and why? I am new to this so could someone show me screen by screen on how to create and implement BADI.
I am confusing about should I create a ZBADI or using existing BADI customer_add_data. If I use existing BADI how can I add my own method with my own code.
Thanks.

Thanks. Could you explain to me how does the custom BADI get call to execute my code? Say
I have a customer document screen 7326 (Customer Master Subscreen SD Documents in program SAPMF02D). What I want is when user click save, I want to do some validation on the output message that they enter and issue some warning or error messages.
I am on ECC 6.0 so I can create a BADI from Enhancement spot not from SE18. SAP has a BADI called CUSTOMER_ADD_DATA with class CL_EX_CUSTOMER_ADD_DATA and interface IF_EX_CUSTOMER_ADD_DATA.
When I create a ZBADI_CUST, which interface class I put in the IF_EX_CUSTOMER_ADD_DATA
or a ZIF_EX_XX so that I can create my own method? How does the BADI get called when I am in transaction XD02 and click the save button? Could you kindly show me step by step the procedure.
Thanks.

How can I get the Microsoft enhanced Point and Print compatibility driver installed on Win7 LC master?

We recently migrated from a Windows Server 2003 to Windows Server 2012 print server. When recomposing a linked clone pool with the old 2003 server, drivers were taken care of for the printer when the user printed for the first time after desktop recompose. With 2012, any printer using the Point and Print driver doesn't seem to obtain the driver again from the 2012 server. All of our clients are running Windows 7 which means the Microsoft enhanced Point and Print compatibility driver is not installed in the OS natively.
I apparently need to figure out a way to get this installed on the host image so it trickles down to snapshots when recomposing the linked clone pool but I haven't been able to dig much information on doing this. Does anyone out there have any insight on how to accomplish this? If I recompose a pool now for a user who is using a new Point and Print driver, they get the following message that is resolved by removing the printer from their account and re-adding it:
"The 'Microsoft enhanced Point and Print compatibility driver' printer driver is not installed on this computer. Some printer properties will not be accessible unless you install the printer driver. Do you want to install the driver now?"
I figured the easy solution would be to just install a printer using the Point and Print driver and then remove it...leaving the driver behind (unless it cleaned up after itself). The problem with this is in my testing, even after removing and re-adding a printer that set off installation of this Point and Print driver on the client, any other printer that was using it still required the remove/re-add process in order to work, else I got the same message. That tells me that the driver may be custom for each printer installed?
Color me a little confused. I do NOT like the way that Server 2012 handles printers. I've come across a few other issues as well (such as duplex capabilities not being remember on the print server for a printer) that I never had with the 2003 server.
Thanks!!

I was able to get it to work using your instructions off of here and your other thread
Thank you!
Chris
http://social.technet.microsoft.com/Forums/en-US/864553c2-c8ff-49d2-bd48-eb7b47381111/windows-2012-print-server-problem-with-xp-clients?prof=required

EXIT/ BADI/ Enhancement point for User Status change in Order

Hi all,
I am looking for an EXIT or a BADI or an enhancement point specifically for user status change in an order thru IW31/IW32.
I have the exit names for Order PBO, PAI, 'SAVE' event etc. so m not looking for generic answers.
I have to put some validations for the Order on USER STATUS CHANGE. Let me know if any of u have any pointers on that.
Thanks and Regards,
Sonal

Hi,
Use this Enhancement IWO10009 and call these function module to change the User Status
STATUS_TEXT_EDIT --> To Read the existing status.
STATUS_CHANGE_INTERN_VB --> to change the status.
Regards,
Satish

User Exit/BADI/Enhancement Point in VF01 before new document no assignment

Hi Expert,
I am looking for a user exit/BADI/Enhancement point which will trigger in VF01 before the new document no (Billing document no assign).
I need to cross check few things in Billing via VF01 at billing document save and give error message accordingly. The problem is if new number assign and there is error due to my code then when user save the document next he get a new no. its mean a no skip.
Example: The invoice no is 1000. User start creating a billing document with Vf01 and he get an error message due to my code at exit , at this point of time the next number assign to billing which is 1001 but document not save due to my error message. Now after applying correction user save data and billing document created with no 1002. So there is no skip.
I tried BADI BADI_SD_ACCOUNTING but this will trigger after no assignment. Can someone provide me a user exit/BADI/Enhancement point in VF01 which trigger before no range assignment and contain at least Billing header data to use in my code?
Regards
Swati
Edited by: Swati Namdev on Nov 16, 2010 9:55 PM

HI Brad and team,
BRED is right. I check few user exit normally all of us have that list or easily available on net.
BRED: my question is: I need to check the billing date VBRK-FKDAT of document should not be less than the sales order plan billing date VBAP-Oldate.
If this check fail then won't allow the user to create billing document. The problem is I used one user exit SDVFX001 already define previously that's work fine but issue is that user exit trigger after the billing no assignment. That's why when user get that error message he correct the document and create billing this time he get a new number which is skip of one no.
That why I need a User Exit/BADI/Enhancement Point which trigger at save but before document no assignment.
Please update more about your comment "Why not use a header level copy requirement routine to perform the checks and log the messages? This is the standard process." .
Suggest user exit USEREXIT_FILL_VBRK_VBRP trigger before save. I need at save the reason is VBRK-FKDAT this can be change.
Feel free to contact me back if you need more clarification.
Regards
Swati
Edited by: Swati Namdev on Nov 17, 2010 6:22 PM
Edited by: Swati Namdev on Nov 17, 2010 6:25 PM
Edited by: Swati Namdev on Nov 17, 2010 6:32 PM
Edited by: Swati Namdev on Nov 17, 2010 6:47 PM

Deleting Enhancement Point

Similar Messages

Maybe you are looking for