Deleting failed request from DSO leading to delete of INIT of DSO to Cube

data flows from ds1, ds2 and ds3 to dso1 as delta. the data is then taken from dso1 to cube1 via delta
data flows from ds3 to dso2 as delta. the data is then taken from dso2 to cube 2 via delta.
when a data is loaded from ds1 or ds2 or ds3 to dso1.. or when data is loaded from ds3 to dso2.. now if we try to delete this un activiated request from lets say dso1. it gives and error that the init from dso1 to cube1 would be deleted as the data has already been data marted.
this happens even if the request in dso1 is inactive successful or inactive failed.
i did an init of ds1,ds2, ds3 to dso1. and also did an init from dso1 to cube1. but the problem persists.
though if all goes good. like no failures in the load, then all is well.
but if the load failed. say ds2 to dso1 failed. then when we attempt to delete this request from dso1, it says that it has already been uploaded to cube1 and the init will have to be deleted. here when we checked the datamart sign in dso1, it looks like the newly loaded n unactivated data is somehow assosiated with the dso1tocube1 init.
any thoughts?

Please give more info.
How have you connected DS01 and Cube 1? Transformation or update rules? How have you done the initialization?
What is the version SAP BW that you are using?
Have you checked any relevant SAP Notes?
Thanks,
Krishnan

Similar Messages

How to load request by request from DSO to Cube

Hi All,
I am loading the data from DSO to Cube. In DSO each request has some 50 lakhs records. When I give execute in the cube transformation after some time it is giving timout error(Basis have set the time till 25 min) and I gave one more option in DTP get all new data request by request but this option also not getting the proper data. Again I am getting the time error.
If anyone knows any other option please let me know.
Thanks for your help in advance
Regards
Sathiya

Hi,
You can load on the criteria of key fields in the DSO.
Or selecting Fiscal periods may help.
Hope this helps,
Regards,
anil

Error while deleting request from DSO: S:RSODSO_ROLLBACK:259

Hi,
While deleting request from DSO, we face following errors:
S:RSODSO_ROLLBACK:259 129 transaction rolled back by an internal error: fail
Message no. RSODSO_ROLLBACK259
Job is getting completed with message:
Deletion of request REQU_3HHPSMIMMVRF87FI0EGC5CS4B from data target ZPR_ODS failed
Deletion of request REQU_3T80EDOBQR7CWSC8QKKHAMH5N from data target ZPR_ODS failed
Deletion of request REQU_8JIMF8SRDOG0T3QG6AGRA63Q3 from data target ZPR_ODS failed
Deletion of request REQU_CMCCHOZGOF3KXNMVXB94ZHMCB from data target ZPR_ODS failed
Deletion of request REQU_BPCAB8LY6V4CMC3XQ12AWN7MJ from data target ZPR_ODS failed
<Message short text RSODSO_ROLLBACK 259 does not exist>
Parallel processes (for Rollback); 000003
Timeout for parallel process (for Rollback): 000600
Package size (for Rollback): Dependent on Activation
Task handling (for Rollback): Backgr Process
Server group (for Rollback): No Server Group Configured
Job finished
FYI:
Kindly help us to resolve the error.
Regards,
Antony Jerald.

Hi Dinesh,
Thanks for your reply.
We have Netweaver 7.30 with BW on hana on SP 9.
First 3 SAP notes doesn't meets the need.
Shall I use 1007717 note?
Which says:
use transaction SE16 to delete all entries for this request and for this Operational Data Store (ODS) object from the RSICCONT, RSMONICDP, RSODSACTUPDTYPE and RSODSACTREQ tables. Then set the 'from-date' in the administration of the data target to a value older than the oldest request loaded in this ODS object. Choose 'Refresh'. This corrects the administration.
Will it resolves the problem?
Kindly suggest.
Regards,
Antony Jerald.

Problem in deleting a request from Dso

Hi Experts,
I have loaded the request into DSO, after activation, i have changed the QM status to red and try to delete it from the manage screen. But it is not getting deleted from DSO.
I have used following tables :
RSREQDONE
RSICCONNT
RSODSACTREQ
For deletion purpose, but i'm not provided with authorization ..
And also i have used FM to delete the request from DSO , but it also failed ..
Can you please help me out in this regard..
Thanks
PT

Hi,
Please check if your DSO is locked by any other process. You can check the lock status from SM12. If your DSO is locked by some other process, you will have to wait till that process finishes or kill the process if it is not required so that your DSO will be unlocked. Once your DSO is unlocked you can retry activation. If this doesn't work, please check if you have the authorization to delete data. after trying to delete the DSO you can run the transaction SU53 to see if there is any authorization failure.
Hope this helps you.
Thanks,
Nithin Reddy.

How to delete a single request from DSO in BI 7.0

Dear Experts,
Could you please tell me how to delete a single request from DSO?
I mean, in DSO if we delete one request it also delete the requests which are above it. But i don't to delete the above it.
Please suggest me this issue.
Regards,
Prathap

IN DSO--its a very basic thing....
ACTIVE TABLE and CHANGELOG tables are overwritten after activation of each request.
So ,each new request has a realationsip with the older request.
So in the cases:
1.If you activate the older request it will delete the new one ,because changelog entries have been written from the data of new request on the basis of the older one.
e.g older request entries:
a x 1
new request
a x 2
change log
a x 1
a x -1
a x 2
so its quite obvious you can't have a x 2 directly (because in the infocube you will be sending wrong entries by deleting the just the older request and loadning new request).
2.If you have activate new and old request toghterh then also system will not allow you to delete the newer request alone and you will have to delete both the requests.
I guess already someone proposed correct solution to you ...thats selective deletion...but rahter than doing selective deletion there is a better way if you want to cancel out a particular request:
thats request reverst posting
IN the process monitor of any particular request you can find out the option for request reverse posting..Its good for individual request cancellation(keyfig values will become 0 for that particular request)
regards,
rk

Recover deleted requests from DSO

Hello BI Experts,
We have been deleted requests from standard DSO accidentally. The data has been deleleted for 3yrs and we have been trying to recover from Reconstruction tab but could not found anything there.
Can any body tell me how to recover recover deleted requests from DSO? I would really appreciate your great help.
Thanks in advance,
Regards,
Venkat

HI BI Experts,
When we personalize Query language to another language in the SAP Portal, the variable selection fields are not displaying with description and they are displaying in the technical name.
Example: Opened BI report from the SAP Portal and selected Personalized settings, from there selected Portal language as French. when I selected French language, the vaiable selection screen field names started appearing with technical field name in the French language but it should display the field description not the technical name.
I hope you understand my question.
End user does not understand the technical names when they have selected personal language. Can any body tell me how can the fields displays with description from the variable selection screen. I would really apprecite your help.
Thanks,
Venkat

New field added to cube, delta DTP from DSO to cube is failing

Dear all,
Scenerio in BI 7.0 is;
data source -delta IPs-> DSO -
delta DTP---> Cube.
Data load using proces chain daily.
We added new field to Cube --> transformation from DSO to cube is active, transport was successful.
Now, delta from DSO to cube is failing.
Error is: Dereferencing of the NULL reference,
Error while extracting from source <DSO name>
Inconsistent input parameter (parameter: Fieldname, value DATAPAKID)
my conclusion, system is unable to load delta due to new field. And it wants us to initialize it again ( am i right ?)
Do I have only one choice of deleting data from cube & perform init dtp again ? or any other way ?
Thanks in advance!
Regards,
Akshay Harshe

Hi Durgesh / Murli,
Thanks for quick response.
@ durgesh: we have mapped existing DSO field to a new field in cube. So yes in DTP I can see the field in filter. So I have to do re-init.
@ Murli: everything is active.
Actully there are further complications as the cube has many more sources, so wanted to avoid seletive deletion.
Regards,
Akshay

Data Extraction failure from DSO to Cube

Hello Experts,
The Data load to Cube( zfiar_c03) from DSO (zfiar_03) using a full
update is failing throwing the error message"Incomplete update due to
errors in single records ".We had deleted the failed request from
infocube and loaded the the same req from psa by correcting or removing
the # values but it failed again resulting in the same error.
When we checked the previous successful requests which got loaded to
cube from dso it also contains the # values , but the loading was
successful.
our BW reporting is seriously impacted due to the failure coz our
collection,recievables..etc all business critical report is based on
this cube.
Request you all to help..
thanks,
Sapta

Hi Sapta Jyothi,
I am not sure what the actual problem is. But, from my prior experience, I fell this is related to the Process chain configuration provided you are using process chains.
If you are using a process chain , please check if there is any other failed step in the Process chain. If that is the case, even if the failure due to invalid entries is fixed the QM status of the load to the cube will not turn Green till the process chain status turns green or yellow. You can check from the details tab of the info-package load run and see if the process chain log step is red. If this is the case, then you will have to take action to see that other steps are completed succesfully. And also the Process chain in this case needs to be modelled in a way, such that, when a load to a cube fails the successive steps like creation of cube indeces should not be triggered.
Thanks ,
Nithin.

Unable to load data from DSO to Cube

Good morning all,
I was trying to load data from DSO to Cube for validation. Before loading the new data, I deleted all from DSO and Cube. They contain no request at all. Cube has "Delta Update". First DSO was loaded 138,300 records successfully. Then Activated the DSO. The last when I clicked Exectue (DSO --> Cube), it loaded 0 record. I was able to load the data yesterday. What might be the reasons for this situation?
Thank you so much!

Hi BI User,
For loading delta upload into the data target, there should be an initialization request in the data target with same selection criteria.
So..first do the initialization and perform delta upload into the cube.
Regards,
Subhashini.

Regarding Loading the data from DSO to cube.

Hello Experts,
I have DSO which loads data from psa using 7.0 tranformation (using DTP). And i have a cube which loads the data from that DSO using 3.x transfer rules. Now i have deleted the init request for a infopack before load the data into DSO. But when i load the data from DSO to cube by right click on DSO -> click On Additional Functions -> update the 3.x data to targets, It is giving me an error like 'Delete init. request REQU_4H7UY4ZXAO72WR4GTUIW0XUKP before running init. again with same selection
Please help me with this.
i want to load the data in the init request to cube..
Thanks

Hi Shanthi,
Thanks For reply. I have already deleted the init request from source system to DSO and then i have tried still i am getting the error.
Thanks

Partial data loading from dso to cube

Dear All,
I am loading the data from dso to the cube through DTP. The problem is that some records are getting added through data
packet 1 to the cube around 50 crore records while through data packet2 records are not getting added.
It is full load from dso to cube.
I have tried deleting the request and executing DTP but again the same no of records get added to the cube through datapacket 1 and after that records are not added to the cube through datapacket 1 ;request remains in yellow state only.
Please suggest .

Nidhuk,
Data load transfers package by package. Your story sounds like it got stuck in second package or something. Suggest you check package size, try to increase to a higher number to see if anything changes ? 50 records per package kind of low, your load should not spread out into too many packages.
Regards. Jen
Edited by: Jen Yakimoto on Oct 8, 2010 1:45 AM

Delta records not updating from DSO to CUBE in BI 7

Hi Experts,
Delta records not updating from DSO to CUBE
in DSO keyfigure value showing '0' but in CUBE same record showing '-I '
I cheked in Change log table in DSO its have 5 records
ODSR_4LKIX7QHZX0VQB9IDR9MVQ65M - -1
ODSR_4LKIX7QHZX0VQB9IDR9MVQ65M -   0
ODSR_4LIF02ZV32F1M85DXHUCSH0DL -   0
ODSR_4LIF02ZV32F1M85DXHUCSH0DL -   1
ODSR_4LH8CXKUJPW2JDS0LC775N4MH -   0
but active data table have one record - 0
how to corrcct the delta load??
Regards,
Jai

Hi,
I think initially the value was 0 (ODSR_4LH8CXKUJPW2JDS0LC775N4MH - 0, new image in changelog) and this got loaded to the cube.
Then the value got changed to 1 (ODSR_4LIF02ZV32F1M85DXHUCSH0DL - 0, before image & ODSR_4LIF02ZV32F1M85DXHUCSH0DL - 1, after image). Now this record updates the cube with value 1. The cube has 2 records, one with 0 value and the other with 1.
The value got changed again to 0 (ODSR_4LKIX7QHZX0VQB9IDR9MVQ65M - (-1), before image &
ODSR_4LKIX7QHZX0VQB9IDR9MVQ65M - 0, after image). Now these records get aggregated and update the cube with (-1).
The cube has 3 records, with 0, 1 and -1 values....the effective total is 0 which is correct.
Is this not what you see in the cube? were the earlier req deleted from the cube?

Semantic Partitioning Delta issue while load data from DSO to Cube -BW 7.3

Hi All,
We have created the semantic partion with the help of BADI to perform Partitions. Everthing looks good,
first time i have loaded the data it is full update.
Second time i init the data load. I pulled the delta from DSO to Cube . DSO is standard where as Cube is partition with the help of semantic partition. What i can see is the records which are updated in Latest delta are shown into the report rest all are ignored by the system.
I tried compression but still it did not worked.
Can some has face this kind
Thanks

Yaseen & Soujanya,
It is very hard to guess the problem with the amount of information you have provided.
- What do you mean by cube is not being loaded? No records are extracted from DSO? Is the load completing with 0 records?
- How is data loaded from DSO to InfoCube? Full? Are you first loading to PSA or not?
- Is there data already in the InfoCube?
- Is there change log data for DSO or did someone delete all the PSA data?
Sincere there are so many reasons for the behavior you are witnessing, your best option is to approach your resident expert.
Good luck.
Sudhi Karkada
<a href="http://main.nationalmssociety.org/site/TR/Bike/TXHBikeEvents?px=5888378&pg=personal&fr_id=10222">Biking for MS Relief</a>

Data load from DSO to Cube in BI7?

Hi All,
We just migrated a dataflow from 3.5 to 7 in development and moved to production. So till now in production, the dataloads happend using the infopackages.
a. Infopackage1 from datasource to ODS and
b. Infopackage2 from ODS to the CUBE.
Now after we transported the migrated dataflow to production, to load the same infoproviders I use
1. Infopackage to load PSA.
2. DTP1 to load from PSA to DSO.
3. DTP2 to load from DSO to CUBE.
step1 and step2 works fine but when I run the DTP2 it is getting terminated. But now when I tried the step b (above), it loads the CUBE fine using the infopackage. So I am unable to understand why the DTP failed and why the infopackage load is successful. In order to use the DTP do we need to do any cleanup when using it for first time? Please let me know if you have any suggestions.
Please note that the DSO already has data loaded using infopackage. (Is this causing the problem?)
Thanks,
Sirish.

Hi Naveen,
Thanks for the Reply. The creation of DTP is not possible without a transformation.
The transformation has been moved to production successfully.

Problem while data processing TRANSACTION data from DSO to CUBE

Hi Guru's,
we are facing problem while data processing TRANSACTION data from DSO to CUBE. data packets processing very slowly and updating .Please help me regarding this.
Thanks and regards,
Sridhar

Hi,
I will suggest you to check a few places where you can see the status
1) SM37 job log (give BIrequest name) and it should give you the details about the request. If its active make sure that the job log is getting updated at frequent intervals.
2) SM66 get the job details (server name PID etc from SM37) and see in SM66 if the job is running or not. See if its accessing/updating some tables or is not doing anything at all.
If its running and if you are able to see it active in SM66 you can wait for some time to let it finish.
3) RSMO see what is available in details tab. It may be in update rules.
4) ST22 check if any short dump has occured.
You can also try SM50 / SM51 to see what is happening in the system level like reading/inserting tables etc.
If you feel its active and running you can verify by checking if the number of records has increased in the cube.
Thanks,
JituK

Deleting failed request from DSO leading to delete of INIT of DSO to Cube

Similar Messages

Maybe you are looking for