Deleting items, Deleting items

I have downloaded at least a thousand music files off of various websites. I have moved all of the files to itunes and then moved them from the desktop to the trash. Now my old mac book g4 says that the hard drive is full and i need to delete items in order to download more music. So my question is if i delete all of the items out of the trash, will they also delete off of itunes or will they stay on?

bobbyb5 wrote:
ok thanks, im not very computer smart but im sure ill figure something out
Go with #2, post here when you get the drive for instructions on how to do it.
Drive will be less than $100, get a 500 gigabyte drive in a case offering USB at least, Firewire in addition is better (but not Firewire only)
Here's an example: Seagate GoFlex at Amazon

Similar Messages

Trying to delete file from trash but get this: The operation can't be completed because the item "File name" is in use. All other files delete except this one. Please help

Trying to delete file from trash but get this: The operation can’t be completed because the item “File name” is in use. All other files delete except this one. Please help

Maybe some help here:
http://osxdaily.com/2012/07/19/force-empty-trash-in-mac-os-x-when-file-is-locked -or-in-use//

When i login to my mac, it opens iTunes, Skype and AIM. I've tried deleting these from the login items, but they are not on the list. Can anyone help?

When i login to my mac, it opens iTunes, Skype and AIM. I've tried deleting these from the login items, but they are not on the list. Can anyone help?

babowa wrote:
If you do not lock that folder immediately after deleting all the contents, it will simply populate again (Resume - a "feature" in Lion). You do that by doing a Get Info (highlight folder and press Command + I keys), unlock the lock at the bottom, enter your admin password, then check the box to lock the folder. lock the lock and you're done.
Yes, that is correct. The alternative is to quit all applications prior to logging out. Lion will then have a chance to remove the saved states.
babowa also wrote:
And, for the OP:
It has also been a regular feature of Mac OS to automatically open any window that was open at shutdown. To avoit that behavior, simply close any Finder windows and properly quit applications by closing their window and using Command + Q (or File >Quit).
This was true only for the Finder. Prior to Lion, no other apps would launch unless they were included in the Login Items for the account. And the OS would not restore windows for other apps.
A very small number of apps (TextWrangler is an example) implemented this capability prior to Lion. They could restore previously opened windows. But that is an application feature, and can be controlled by the application's preferences. Lion implements it at the system level, and users have virtually no control on a per application basis.

Deleted Items Appearing on the FBL3n Report for Open Items

Hi All
We just went live and I am facing a huge issue;
I deleted many migration entries from loads of GL Accounts for multiple Co Codes, but on the FBL3n report, whenI execute with the option of 'Open Items' only, I still see the deleted items with a green check sitting there.
How can i get those from being visible?
Thanks for the support
RS

Hi:
This is standard behavior. Your GL accounts are managed on line item basis hence despite of the fact you reversed the entries they will continue to be shown in open item selection criteria which in fact are not open items. It makes no sense to see a GL account in FBL3N on open item date since this account has been configured on the basis on line item management and i will continue to be shown as line item with green sign . Execute report FBL3N with open item or with all item (with date you give in open item) you will see the same figures and same line items. However you can exclude the reversed entries by fetching reversed with (BKPF-STBLG) field from menu ..settings...special fields and hence excluding the entries having this filed update.
I hope this will solve your issue.
Regards

Error when deleting file: Could not find this item. This is no longer located in ...

We are setting up a new Windows 2012 server. Users access this server using a 'terminal services'. We have mapped some folders from a legacy server (different domain). Using group policy preferences, we map this folder as a drive for a user.
When user wants to delete some files, he get's the error: 'Could not find this item ..' The error is displayed to the user and it looks like the file can't be deleted. But when I press the F5 (refresh) button, the file is gone. My problem is very similar
to a problem in the following post: http://social.technet.microsoft.com/Forums/windowsserver/en-US/042e747a-0e25-4190-b0a2-82f3e9635eb0/can-not-delete-file-error-is-could-not-find-this-item?forum=w7itprogeneral
When I create 'txt' (or 'pdf', 'zip') file, i can delete it without the error. When I create 'xlsx', 'docx', 'pptx', 'bmp', 'jpg', I get the error.
Does somebody have an idea, how can I fix the cause of this problem? (I can't tell to users to hit the F5 button everytime when they face this issue)
Thank you for your help in advance!
Juraj

Hi,
Please check if the problematic files’ filename ended with a dot. If so, you could refer to the article below to troubleshoot the issue:
Solved: “Cannot read from the source file or disk”
http://blog.dotsmart.net/2008/06/12/solved-cannot-read-from-the-source-file-or-disk/
Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Delete Free Goods Item from Sales Order Return

Hi Gurus!
Could you help me with my question below?
Version 6.0
We created a sales return with reference to a billing document containing a standard item and an inclusive free goods item.
During sales order processing we are trying to delete the free goods item and system does not allow us to do it.
Example:
Item         Mat              Quant.
10            AAA            10 bx              (Standard)
11            AAA             2 bx          (Free Goods u2013 Inclusive) -> Try to delete this line.
In our business customer can return any box/quantity and we need this flexibility to create returns with reference to both and one separated item.
Do you know if it is missing any configuration o if there is any Note for this topic?
Tks in advance for you attention.
T.Guimaraes

Hi,
Free goods is determined automatically in the sales order so you cant delete it manually.
Generally free goods are determined on particular quantity.
Like for every 10quantity you will get 2free.
So if you reduce the quantity of the main item then you free goods will automatically go.
This is the one way in which you can do that.
Other way is that create the new document pricing procedure and assign that one your return document type in VOV8.
Then go to IMG u2013 SD u2013 basic function u2013 free goods u2013 condition technique for free goods u2013 activate free goods determination.
Over here check whether your free goods is activated for the newly created document pricing procedure or not.
If yes then remove that entry and save the setting.
Now create the sales order and check out whether free goods is coming or not.
Please assign the pricing procedure also for your newly created document procedure for your return document otherwise there will be no pricing the return document.
Regards
Raj.

Unable to delete master data line items - Master data object CCHIUSRAM

Hello
We have an issue with the Master data Object CCHIUSRAM - CC Hier User Auth Maintenance. It has only master data and no texts no hierarchy. It is not time-dependent. It has /BIC/PCCHIUSRAM, /BIC/SCCHIUSRAM as database table only. This master data is not being used in any infoproviders.
In development client we are able to delete the line items of the Master data along with entering line items. RSRV check gives green for all checks.
In Test / Production client we are not able to delete the line items of the Master data. We are only able to enter master data lines and if we change any item then it creates another entry in the table.
Tried SE14 & RSDMD_DEL_MASTER_DATA - both does not help.
Did ST05 trace, could not find something concrete.
If any one has faced such an issue with any master data item then a response is much appreciated. It has become a bottleneck for us.
Many Thanks in advance
Pradip Parmar

Thanks for the response.
I can do this in EBD, but it is working fine in EBD. I cannot do this activity in EBP / EBT as the systems are closed and I cannot activate directly in EBT / EBP.
Besides, I have recently transported active versions of the object in EBT / EBP all again twice to see if it changes anything.
My guess is that, there is something stupid may be I am missing somewhere.
Any help is much appreciated.
Thanks

Deleted Item not actually getting deleted or **delay** deleted thus getting refetched (EWS Managed API)

I am polling Exchange Server to fetch all the mails left in the Inbox and then fetching them, processing them and finally moving them to the deleted folder. My procedure takes following form of EWS Managed API calls:
1 itemResults = service.FindItems(WellKnownFolderName.Inbox, itemView);
2 //some code...
3 service.LoadPropertiesForItems(itemResults.Items, itItemPropSet);
4 //some code...
5 foreach(Item item in itemResults)
6 {
7 //process item
8 item.Delete(DeleteMode.MoveToDeletedItems);
9 }
To test this code I flooded the inbox with 5000 mails, 5 threads flooding 1000 mails each at the interval of 4ms.
After test run, I realized some mails are getting processed multiple times.
When I read the soap traces logged using TraceListener, I realized that when there are more than 100 mails in the inbox, there are more SOAP packets were dispatched in burst of 100s.
Logically below set of SOAP Packets (let us call it "Set 1") should occur only once:
<m:FindItem>...</m:FindItem> //generated by line 1
<m:FindItemResponse>...</m:FindItemResponse> //generated by line 1
<m:GetItem>...</m:GetItem> //generated by line 3
<m:GetItemResponse>...</m:GetItemResponse> //generated by line 3
followed x number of Delete SOAP packets for x number of mails in the Inbox
<m:DeleteItem>...</m:DeleteItem> //generated by line 8
<m:DeleteItemRepsonse>...</m:DeleteItemRepsonse> //generated by line 8
However if there are say 325 mails in the inbox, then there first occurs 4 occurences of Set 1 followed by Delete SOAP packest as follows:
//1st occurence
<m:FindItem>100 items</m:FindItem>
<m:FindItemResponse>100 items</m:FindItemResponse>
<m:GetItem>100 items</m:GetItem>
<m:GetItemResponse>35 items</m:GetItemResponse>
//2nd occurence
<m:FindItem>100 items</m:FindItem>
<m:FindItemResponse>100 items</m:FindItemResponse>
<m:GetItem>100 items</m:GetItem>
<m:GetItemResponse>35 items</m:GetItemResponse>
//3rd occurence
<m:FindItem>100 items</m:FindItem>
<m:FindItemResponse>100 items</m:FindItemResponse>
<m:GetItem>100 items</m:GetItem>
<m:GetItemResponse>100 items</m:GetItemResponse>
//4th occurence
<m:FindItem>35 items</m:FindItem>
<m:FindItemResponse>35 items</m:FindItemResponse>
<m:GetItem>35 items</m:GetItem>
<m:GetItemResponse>35 items</m:GetItemResponse> //****followed by 335 occurences of the Delete SOAP packets****<m:DeleteItem>...</m:DeleteItem>
<m:DeleteItemRepsonse>...</m:DeleteItemRepsonse>
//334 more of above
So there are 100 + 100 + 100 + 35 = 335 items actually getting handled, which is 10 more than what are actually present in the inbox.
Also notice that Delete SOAP packets are queued till end. They are not dispatched in burst.
First thing I realize dispatching SOAP packets in burst of 100s is EWS Managed API behavior. I guess there must be traffic reason behind it and there must be some configuration setting to tweak it.
Q1. How can we change this count of 100?
I inferred that there are some overlaps in fetching of mails.
So I copy pasted SOAP Traces for first two of
<m:GetItem>100 items</m:GetItem>
in two different files, and compared them in text comparer. I realised that some mails that are at the end of the first 100s were reappearing at the beginning of 2nd 100:
This is the pattern in many test runs.
Due to this these overlapping mails, these mails are getting processed twice. Also the attempt to second time delete them was throwing exception : The specified object was not found in the store.
So I guess there is time delay in delete mail API call and mails actually getting deleted, between which they are getting refetched.
Q2. How can I handle this to avoid redundant processing of mails and unnecessary exceptions.

I am polling Exchange Server to fetch all the mails left in the Inbox and then fetching them, processing them and finally moving them to the deleted folder. My procedure takes following form of EWS Managed API calls:
1 itemResults = service.FindItems(WellKnownFolderName.Inbox, itemView);
2 //some code...
3 service.LoadPropertiesForItems(itemResults.Items, itItemPropSet);
4 //some code...
5 foreach(Item item in itemResults)
6 {
7 //process item
8 item.Delete(DeleteMode.MoveToDeletedItems);
9 }
To test this code I flooded the inbox with 5000 mails, 5 threads flooding 1000 mails each at the interval of 4ms.
After test run, I realized some mails are getting processed multiple times.
When I read the soap traces logged using TraceListener, I realized that when there are more than 100 mails in the inbox, there are more SOAP packets were dispatched in burst of 100s.
Logically below set of SOAP Packets (let us call it "Set 1") should occur only once:
<m:FindItem>...</m:FindItem> //generated by line 1
<m:FindItemResponse>...</m:FindItemResponse> //generated by line 1
<m:GetItem>...</m:GetItem> //generated by line 3
<m:GetItemResponse>...</m:GetItemResponse> //generated by line 3
followed x number of Delete SOAP packets for x number of mails in the Inbox
<m:DeleteItem>...</m:DeleteItem> //generated by line 8
<m:DeleteItemRepsonse>...</m:DeleteItemRepsonse> //generated by line 8
However if there are say 325 mails in the inbox, then there first occurs 4 occurences of Set 1 followed by Delete SOAP packest as follows:
//1st occurence
<m:FindItem>100 items</m:FindItem>
<m:FindItemResponse>100 items</m:FindItemResponse>
<m:GetItem>100 items</m:GetItem>
<m:GetItemResponse>35 items</m:GetItemResponse>
//2nd occurence
<m:FindItem>100 items</m:FindItem>
<m:FindItemResponse>100 items</m:FindItemResponse>
<m:GetItem>100 items</m:GetItem>
<m:GetItemResponse>35 items</m:GetItemResponse>
//3rd occurence
<m:FindItem>100 items</m:FindItem>
<m:FindItemResponse>100 items</m:FindItemResponse>
<m:GetItem>100 items</m:GetItem>
<m:GetItemResponse>100 items</m:GetItemResponse>
//4th occurence
<m:FindItem>35 items</m:FindItem>
<m:FindItemResponse>35 items</m:FindItemResponse>
<m:GetItem>35 items</m:GetItem>
<m:GetItemResponse>35 items</m:GetItemResponse> //****followed by 335 occurences of the Delete SOAP packets****<m:DeleteItem>...</m:DeleteItem>
<m:DeleteItemRepsonse>...</m:DeleteItemRepsonse>
//334 more of above
So there are 100 + 100 + 100 + 35 = 335 items actually getting handled, which is 10 more than what are actually present in the inbox.
Also notice that Delete SOAP packets are queued till end. They are not dispatched in burst.
First thing I realize dispatching SOAP packets in burst of 100s is EWS Managed API behavior. I guess there must be traffic reason behind it and there must be some configuration setting to tweak it.
Q1. How can we change this count of 100?
I inferred that there are some overlaps in fetching of mails.
So I copy pasted SOAP Traces for first two of
<m:GetItem>100 items</m:GetItem>
in two different files, and compared them in text comparer. I realised that some mails that are at the end of the first 100s were reappearing at the beginning of 2nd 100:
This is the pattern in many test runs.
Due to this these overlapping mails, these mails are getting processed twice. Also the attempt to second time delete them was throwing exception : The specified object was not found in the store.
So I guess there is time delay in delete mail API call and mails actually getting deleted, between which they are getting refetched.
Q2. How can I handle this to avoid redundant processing of mails and unnecessary exceptions.

Work Item not getting logically deleted

Hi All,
We have created a custom workflow for PR approval at Item Level. I have RELEASE STEP CREATED as triggering event.
I have used a FORK with 5 branches with 4 wait events and min cond as 1. The inherited business object ZBUS2009 has been created with events CHANGE, DELETED. The business object has been delegated to Original Business object BUS2009.
To trigger the events like DELETED and CHANGED, I have used POSTED METHOD of ME_REQ_POSTED BADI.
When a PR Item is created the agents are determined successfully and work item is placed in his SAP Inbox. Later the PR Item has been deleted and saved the BADI Implementation is triggered and I can see the log in SWEL for DELETED event with success icon.
However when i go back to PR Item which i have deleted and see the workflow log the work item is still in the approver's inbox. but the graphic log shows that the DELETED branch of the fork is completed. I tried all options like Buffer synch, background job, queue admin etc with no success.
I did the same workflow at one of my previous clients and it is working perfectly for last 2yrs.
Can any one guide me on what could have gone wrong or what i am missing?
Thank you all in advance for help...
Regards,
Lakshmi Narayana

Hi Arghadip,
Thanks for your quick response.
The fork is having 5 parallel branchs and 1 necessary branch and is INDEED HAS NO EXTRA CONDITIONS.
Also as i mentioned the graphical log shows that the completion of BRANCH Beneth DELETED but the work item is still in approver's inbox.
Please let me know if I am missing something....
Rgds,
Lakshmi

Work Item Not getting Deleted

Hi
We have a starge issue.
We use the table SWWUSERWI to see all the work items in the user's inbox.
If we delete the work item in this table it will remove the same from user's inbox.
We have a problem now. Even after we deleted all the work items the SRM "Approval" link and the "Inbox" still contains Workitems( more than 200 ).
Is there anyother table or tCode to find the work items in user's inbox'
Thanks
Siva.

HI experts!!
The issue is solved!!!
The another user who is not with the company currenlty had maintained the user who had problem as substitue!!!.. we had to remove the substitute to solve the problem.
Thanks
Siva.

How do I get my deleted emails to go to the deleted items in Outlook and not the archived folder?

How do I get my deleted emails to go to the deleted items in Outlook and not the archived folder?

Who is the email account provider?
With an Apple iCloud account, there is a preference setting with the account settings on the iPhone to archive messages - save deleted messages in your Archive folder.
I believe the same is available with a Gmail account.

IPhone 5 sending all "Sent Emails" to "Trash" Folder and deleted items not showing up at all

My boss has an iPhone 5 and today she realized that trash folder only has the last 50 emails that she has sent.
The trash folder is empty.
We use gmail. Her outlook is fine and the web interface is fine. She's tried restarting her phone. Will we have to delete the account and resync? (please say no...)
Thanks!

Dear Mr. Rakesh Vijayan,
What is your justification for below behavior?
Using basic Gapps (free) email server,IMAP option client with MSO2013. Window 7 professional
MO Professional Plus,
(15.0.4535.1006), MSO(15.0.4535.1507)32-bit.
Auto migrated/upgraded from MS2007 to MS2013 in March, 2013.
Inbox repair tools has been run 03 times since last 6 months in safe mode..
Already configured Settings> advanced and deselect "Do not save copies of sent items
Already configured File > Account Setting > double-click your IMAP account and adjust "Mail to keep offline" to "All".
Since March 2013, 95% mails are getting saved/appearing in Sent Items folder. Only some times few mails are not appearing in sent item outlook client folder.
All those emails are also appearing in All mail Folders.
Any email sent from Gapps web interface/browser definitely getting save/ appearing in sent item outlook client folder.
But now since last 4 days no email sent using outlook are appearing in sent items folder.
Sincerely Yours
Kranti Mohan | Head-Corporate Sales, Mkt. & Development |
GPS Address:30.725144N,76.765755E
Maya Hotels|SCO 325-328 | Himalaya Marg | Sector-35B | Chandigarh-160022, India.
T: +91(0172) 4688774x (D)/4688700x174 | M: +91 (0) 9915707030 | F: +91 (0172) 2660555
[email protected] |  http://www.mayahotels.in
http://www.facebook.com/mayahotel |  http://www.youtube.com/user/mayahotels
http://twitter.com/mayahotels  |  https://www.orkut.co.in/Main#Community?cmm=101119348

I have the iPhone 4, and yesterday I synced my photos onto iTunes, but now I have albums on my phone that cannot be deleted, and there is not an option to delete the items in the albums individually... How do I get rid of these unwanted albums? Windows 7

I have the iPhone 4, and yesterday I synced my photos onto iTunes, but now I have albums on my phone that cannot be deleted, and there is not an option to delete the items in the albums individually... How do I get rid of these unwanted albums? Using Windows 7.

If you used iTunes to get the photos on the phone, then use the same iTunes and uncheck the music you don't want and do another sync.

Hacker problems so I reloaded Snow Leopard. Afterwards, Mac had to delete 798 items. Now looping on 4 items to delete for the past 2 weeks. Can't reboot, reload, or restart. I have to let the battery run down for it to turn off. How to fix this, please?

I had hacker problems so I reloaded Snow Leopard. Afterwards, Mac had to delete 798 items. Now it is looping on 4 items to delete for the past 2 weeks. I can't reboot, reload, or restart. I have to let the battery run down for it to turn off. I think a big part of the problem is that someon one the internet (the hacker) was mirroring my hard drive. It seems to have locked up my system. I could be wrong about this guess, though. All I do know is that it is now looping on the last 4 iems, and I can't do anything.
Well, I can get it to turn on, but all it does is continously try to delete the last 4 items. When I try to reload Snow Leopard, it tells me my hard drive is full and that I need to delete items.
Can anyone help? I am so lost without my Mac. I am back on the PC, and though it works, I'm sure many of you will understand when I say it's just not a Mac.
Thanks.

I installed Snow Leopard using my Apple external Superdrive. I followed directions I found on the Apple site. Here is the article info: Mac OS X v10.6 Snow Leopard: How to Erase and Install
                 Article HT3910
                 located at: http://support.apple.com/kb/HT3910
Everything was going smoothly until I got to the reinstall part. I had to choose to reinstall on a hard drive or network drive. I've never used a network drive; just the hard drive. It seems that's where the troubles began. I selected the hard drive. It seemed to go well, and then I got the message that I needed to delete some files because I was out of space. I chose to get rid of my music files, but, there were only 636. I don't know what the rest of the files were. I was using the Secure Empty Trash command.
That was my first time doing an erase and install. I tried to do it again, but I now get a continuous error telling me that my hard drive is full and I must delete files. Only I can't delete files because 4 files are still being deleted and my computer won't let me stop the process.
I found out about the hackers mostly by the fact that whenever I used to watch something like Hulu or Netflix, I never had problems with internet connection or speed. Lately, I had internet connection problems. I went in to check my settings for my internet provider and found out the settings had been changed to public and all these extra computers were connected to my network.

I am trying to stop programs from opening automatically when I turn my computer on. I tried system preferences users and groups login items...then I deleted them from the list but it did nothing.

I am trying to stop programs from opening automatically when I turn my computer on. I tried system preferences>users and groups>login items...then I deleted them itunes and emial from the list but it did nothing. They continue to open up every time I turn on my Macbook Pro.

Hi r,
It sounds like you're running Lion?
Have you tried running Verify and/or Repair Disk?
Have you tried running Repair Permissions?
Do you have at least 15% free space available on your HD?

I tried to delete one item from an email folder, and my computer deleted the whole file. I cant fint it anywhere.

I tried to delete one item from an email folder, my computer deleted the whole file and I cant find it anywhere. Any ideas?

lindafromgainesville wrote:
...is there a seperate trash for email?
In Mail, yes -

Deleting items, Deleting items

Similar Messages

Maybe you are looking for