Deleting Mark In, Out Points

How can I delete Mark In and Mark Out points that are no longer needed or were otherwise applied in error?
Thanks....

Sounds like you figured it out, not sure? Anyway:
In/Out points can be entered in different places, one method for deleting is right (Control) clicking in between the in/out points and choosing a short cut menu option.
Al

Similar Messages

Mark a series of In Out Points before capture from DV tape?

When Using Adobe Premier Pro a few years back I seem to remember playing a tape all the way through, marking In/Out points, all the way along the tape, then going back to the beginning click Batch Capture ( or similar) and the machine would rewind the tape and run through again capturing just the relevant clips.
Can I do this in FCE?
I see I can do an individual clip, or the whole tape, but cant seem to find if I can do a batch capture?
If not, is it possible to set FCE to split the capture automatically after each scene , detect where the Record/stop button has been pressed when the film was taken and split there?
Sorry cant tell you what version at the moment, a capture is in progress. But I bought it about one month ago.
Message was edited by: Neil Paisnel

Oh, yes, it was, the fatal error was naming a user 'Home'
That combined with doing a restore from a TM backup that did not backup anything in a folder named Home...so no user data backed up. It is in the TM auto exclude list.
When I rebooted, it would not allow me to log in under any name, as no user existed anymore. Eventually loged back in from terminal/Single user mode, can t remember now. Finally got back in but dock icons all gone, replaced by big question marks, had to run everything from terminal window..
What I am getting at is that I had been lead to believe that this OS was so solid, and to quote one of my friends ' you cant do anything wrong...it wont let you' I had wanted to believe this though I did doubt it. I use a varity of systems, FreeBSD/FreeNAs server or three, Ubuntu variants etc.
So despite what it may sound like, I am not knocking it, and am quite prepared for differences, more dissapointed that it has not lived up to the hype I have been fed by all my mates all these years, and feeling foolishg for believing them. It does not seem any quicker/slower or more or less stable than a well setup and maintained Windows install. Apps certainly freeze as often as Windows apps....but that probably can be laid at the door of the third party developers....Admitedly, it probably takes more work to keep a Windows machine running at top performance, far more daily/weekly chores/cleanups etc to do to keep it 'clean'

Dragging a clip made with In/Out points from viewer

I'm using Tom Wolsky's book FCE 3.5 to learn FCE 4.
I'm hoping it will at least get me through some of the minutiae.
I'm on page 44 and 45 "Slicing your clips" and under "Slice 1" #9 it says I should drag the marked clip from the viewer and drop it in my newly created bin marked "Clips".
When I drag whats in the viewer with my new In/Out points into my browser, I'm dragging the entire "Temple" clip into my browser that has the marked In/Out points on it, not just the clip made with the In/Out points.......my understanding is that I'm supposed to be dragging the clip I just made, not the entire Temple scene with the In/Out points simply marked......
Naturally, any help or scathing insight would be great!

I guess I wasn't supposed to be dragging the clip itself, but the master clip >with In/Out points on it..........
but the master clip >with *(_new in/out points_ and been made to a Modify>Make Master Clip)* In/Out points on it.
The new ones are now independant.
Al

Prelude not creating In/Out points when ingesting P2 footage

I'm working on a Windows 7 (64bit) machine and I'm ingesting footage off of a P2 card reader (connected via usb). In the Ingest panel I marked In/Out points on several P2 files using "I" and "O" keyboard shortcuts. I ingested the footage with the transfer options set to transfer to a new directory on the hard drive (no transcode) with the verify transfer checked. The files seemed to transfer fine and they showed up in the Project panel. When I played them in the monitor I discovered that the In/Out points I set prior to the ingest were ignored.
Prior to ingesting the P2 footage I ingested some AVCHD footage with a transfer and transcode to P2 Movie. In that case the in/out points that I added in the ingest panel were respected when I played them back in the monitor after the ingest.
So, does the setting of in/out point in the ingest panel only take effect if you are transcoding footage?

Current input suggests creating subclips would be acceptable. So the net result you would see in the project panel after ingesting a clip with In/Outs set would be a master clip (representing the full clip) and a subclip representing the In/Out range specified.
Is this what you would also expect?
Michael,
Thanks for your quick response. Yes, making subclips makes sense...although I guess I don't see much advantage of creating subclips prior to ingest vs after...especially when after ingest you can establish multiple subclips on one master clip. On this specific project I had lengthy pre and post roll on several shots which I was hoping to eliminate by setting in/out points prior to ingest - so that after injest I would have only clips with relavant action.

Mark in and out point on non-primary storyline

Ok - I must be missing something... How do I mark and in and out point in a non-primary storyline?
Say, I want to replace part of a non-primary storyline with gap... The only way I've seen to do that would be to blade the clip in the non-primary storyline into three parts and 'delete' the middle bit out, which is what marking an 'in' and 'out' and pressing 'delete' is the accelerated way of doing it in the primary storyline.

Yes I know.
The thing with markers (M) is that these are always placed on the primary storyline, except if you selected a clip in the non-primary storyline. So I don't know why you must first select the Range Selection tool to make in's and out's. Why don't it works just as the markers do.

Why am I not able to mark "in" and "out" points in Final Cut Pro 6?

I have a bunch of old tapes that I am trying to put on my computer. I have Final Cut Pro 6 and everything hooks up nicely except I am not able to mark in and out points or use capture now. Does anyone out there know why that would be the case?
I appreciate any help I can get.

What VTR? How is it controlled?
What are your capture settings? Firewire Protocol?
x

Marking an in or out point in the event browser changes the selected clip

I'm getting quite infuriated with this issue at the moment. I'm not sure if it's a bug, or I'm doing something wrong.
I've created collections of subclips by tagging ranges with keywords in the event browser. I'm now trying to edit these onto the timeline. I find the clip I want in the browser and use JKL and IO to mark the in and out point of the actual part of the clip I'm going to use. The problem I'm having is that sometimes - not all the time - pressing I or O changes the selected clip in the event browser.
Any ideas what's going on?
Many thanks in advance for any help you're able to offer.

Changes how? Post screen shots of what you're seeing and what you expect to see.

Cannot delete clips when using in and out points

Hi
I Cannot trim or delete clips in final cut when I'm using the in and out points. Nothing happens and the clips stays the same.
any suggestions?

Duplicate post: http://discussions.apple.com/thread.jspa?threadID=2758328&tstart=0

Set Marker Duration (In/Out Points of Marker) Keyboard Shortcut

Is there a keyboard shortcut for setting the In and Out point of a Marker?
I am editing interviews and would like to use Marker Ranges to indicate responses/topics.
So, I would like to have a keyboard shortcut as easy as "I" or "O" to set the In and Out point of a Marker Range.
The only option that I can see is to pull up the Edit Marker Box and manually adjust Duration.
This won't work because I want to set this Marker Range on the fly as I watch the clip.

That would be a nice feature.
FEATURE request

Cannot delete clips in timeline using in and out points

Can't delete or trim clips clips in the timeline when I use the in and out points. Can't figure out this flaw. Its as if final cut does not recognize the ine in and out points. I 've been using the razor to make edits, but when a come across a flash frames and need in and out points to delete the flashframe, I'm in trouble.
Thanks

Hi -
You are missing a step.
Set the in and out points on the section you want to delete:
Then type Option-A to select the area within the In and Out Point:
Then press the small delete key or Shift+ Regular Delete Key and it will delete the section you've designated with an In and Out and pull up the rest of the edit:
MtD

No mark in and out points at batch capturing

I have created logged clips to my browser window but, noticed that the IN and OUT points say NOT SET.
Is this normal?
As I create the logged clips for batch capture shouldnt I see the IN and OUT times?

That's normal. When you set In and Out in the Log & Capture window, those points become Media Start and Media End in the Browser. And In and Out are left as Not Set.
The rationale is that once you've captured, you'll review your clips and place In and Out points more precisely. In case you do want to stick with Media Start and Media End as your In and Out, simply load the clip into the viewer and press X on your keyboard - that will set your In and Out (at Media Start & End) for your clip.
Now - you know there had to be one caveat - the only time this is not the case is when you check the box to Add Handles in the Batch Capture dialog. In that case, when FCP captures the clips, it extends the Media Start and Media End by the handle amount and uses the In and Out that you specified during logging as the In & Out for that clip in the Browser.

Delete disk backup recovery point

Hi Guys,
Am using DPM 2012 SP1 version 4.1.3313.0
Looking to delete the disk recovery points & using the script mentioned int he gallery - http://gallery.technet.microsoft.com/scriptcenter/DPM-2012-R2-Remove-6167f338
Somehow when i run the scripts and follow the steps till recovery points there are approx. 192 numbers out of which am not able to distinguish which one is tape and disk recovery point.
I changed my retention from 15days to 5days the older recovery points are not getting removed automatically instead of the scripts i have ran Removeinactiverecoverypoint.ps1, removerecoverypoint.ps1 & pruneshadowcopiesDpm2010.ps1
Somehow i managed to shrink but that not what am looking for. I want to delete the older recovery points than 5days and using that gallery script how can i identify which one is tape / disk recovery point.
Note: i dont want to delete the tape recovery points.
- Charles

Hi,
Please try this script and see if that works for you.
#Author : Ruud Baars
#Date : 11/09/2008
#Edited : 11/15/2012 By: Wilson S.
#edited : 07/25/2014 By: Mike J.
# NOTE: Update script to only remove recovery points on Disk. Recovery points removed will be from the oldest one up to the date
# entered by the user while the script is running
#deletes all recovery points before 'now' on selected data source.
$version="V4.7.2"
$ErrorActionPreference = "silentlycontinue"
add-pssnapin sqlservercmdletsnapin100
Add-PSSnapin -Name Microsoft.DataProtectionManager.PowerShell
#display RP's to delete and ask to continue.
#Check & wait data source to be idle else removal may fail (in Mojito filter on 'intent' to see the error)
#Fixed prune default and logfile name and some logging lines (concatenate question + answer)
#Check dependent recovery points do not pass BEFORE date and adjust selection to not select those ($reselect)
#--- Fixed reselect logic to keep adjusting reselect for as long as older than BEFORE date
#--- Fixed post removal rechecking logic to match what is done so far (was still geared to old logic)
#--- Modified to remove making RP and ask for pruning, fixed logic for removal rechecking logic
#--- Prompt for MM/DD/YYYY hh:mm:ss AM/PM - V4.7.2
$MB=1024*1024
$logfile="DPMdeleteRP.LOG"
$wait=10 #seconds
$confirmpreference = "None"
function Show_help
cls
$l="=" * 79
write-host $l -foregroundcolor magenta
write-host -nonewline "`t<<<" -foregroundcolor white
write-host -nonewline " DANGEROUS :: MAY DELETE MANY RECOVERY POINTS " -foregroundcolor red
write-host ">>>" -foregroundcolor white
write-host $l -foregroundcolor magenta
write-host "Version: $version" -foregroundcolor cyan
write-host "A: User Selects data source to remove recovery points for" -foregroundcolor green
write-host "B: User enters date / time (using 24hr clock) to Delete recovery points" -foregroundcolor green
write-host "C: User Confirms deletion after list of recovery points to be deleted is displayed." -foregroundcolor green
write-host "Appending to log file $logfile`n" -foregroundcolor white
write-host "User Accepts all responsibilities by entering a data source or just pressing [Enter] " -foregroundcolor white -backgroundcolor blue
"**********************************" >> $logfile
"Version $version" >> $logfile
get-date >> $logfile
show_help
$DPMservername=&"hostname"
"Selected DPM server = $DPMservername" >> $logfile
write-host "`nConnnecting to DPM server retrieving data source list...`n" -foregroundcolor green
$pglist = @(Get-ProtectionGroup $DPMservername) # WILSON - Created PGlist as array in case we have a single protection group.
$ds=@()
$tapes=$null
$count = 0
$dscount = 0
foreach ($count in 0..($pglist.count - 1))
# write-host $pglist[$count].friendlyname
$ds += @(get-datasource $pglist[$count]) # WILSON - Created DS as array in case we have a single protection group.
# write-host $ds
# write-host $count -foreground yellow
if ( Get-Datasource $DPMservername -inactive) {$ds += Get-Datasource $DPMservername -inactive}
$i=0
write-host "Index Protection Group Computer Path"
write-host "---------------------------------------------------------------------------------"
foreach ($l in $ds)
"[{0,3}] {1,-20} {2,-20} {3}" -f $i, $l.ProtectionGroupName, $l.psinfo.netbiosname, $l.logicalpath
$i++
$DSname=read-host "`nEnter a data source index from list above - Note co-located datasources on same replica will be effected"
if (!$DSname)
write-host "No datasource selected `n" -foregroundcolor yellow
"Aborted on Datasource name" >> $logfile
exit 0
$DSselected=$ds[$DSname]
if (!$DSselected)
write-host "No datasource selected `n" -foregroundcolor yellow
"Aborted on Datasource name" >> $logfile
exit 0
$rp=get-recoverypoint $DS[$dsname]
$rp
# $DoTape=read-host "`nDo you want to remove when recovery points are on tape ? [y/N]"
# "Remove tape recovery point = $DoTape" >> $logfile
write-host "`nCollecting recoverypoint information for datasource $DSselected.name" -foregroundcolor green
if ($DSselected.ShadowCopyUsedspace -gt 0)
while ($DSSelected.TotalRecoveryPoints -eq 0)
{ # "still 0"
#this is on disk
$oldShadowUsage=[math]::round($DSselected.ShadowCopyUsedspace/$MB,1)
$line=("Total recoverypoint usage {0} MB on DISK in {1} recovery points" -f $oldShadowUsage ,$DSselected.TotalRecoveryPoints )
$line >> $logfile
write-host $line`n -foregroundcolor white
#this is on tape
#$trptot=0
#$tp= Get-RecoveryPoint($dsselected) | where {($_.Datalocation -eq "Media")}
#foreach ($trp in $tp) {$trptot += $trp.size }
#if ($trptot -gt 0 )
# $line=("Total recoverypoint usage {0} MB on TAPE in {1} recovery points" -f ($trptot/$MB) ,$DSselected.TotalRecoveryPoints )
# $line >> $logfile
# write-host $line`n -foregroundcolor white
[datetime]$afterdate="1/1/1980"
#$answer=read-host "`nDo you want to delete recovery points from the beginning [Y/n]"
#if ($answer -eq "n" )
# [datetime]$afterdate=read-host "Delete recovery points AFTER date [MM/DD/YYYY hh:mm]"
[datetime]$enddate=read-host "Delete ALL Disk based recovery points BEFORE and Including date/time entered [MM/DD/YYYY hh:mm:ss AM/PM]"
"Deleting recovery points until $enddate" >>$logfile
write-host "Deleting recovery points until and $enddate" -foregroundcolor yellow
$rp=get-recoverypoint $DSselected
if ($DoTape -ne "y" )
$RPselected=$rp | where {($_.representedpointintime -le $enddate) -and ($_.Isincremental -eq $FALSE) -and ($_.DataLocation -eq "Disk")}
else
$RPselected=$rp | where {($_.representedpointintime -le $enddate) -and ($_.Isincremental -eq $FALSE)}
if (!$RPselected)
write-host "No recovery points found!" -foregroundcolor yellow
"No recovery points found, aborting...!" >> $logfile
exit 0
$reselect = $enddate
$adjustflag = $false
foreach ($onerp in $RPselected)
$rtime=[string]$onerp.representedpointintime
$rsize=[math]::round(($onerp.size/$MB),1)
$line= "Found {0}, RP size= {1} MB (If 0 MB, co-located datasource cannot be computed), Incremental={2} "-f $rtime, $rsize,$onerp.Isincremental
$line >> $logfile
write-host "$line" -foregroundcolor yellow
#Get dependent rp's for data source
$allRPtbd=$DSselected.GetAllRecoveryPointsToBeDeleted($onerp)
foreach ($oneDrp in $allRPtbd)
if ($oneDrp.IsIncremental -eq $FALSE) {continue}
$rtime=[string]$oneDrp.representedpointintime
$rsize=[math]::round(($oneDrp.size/$MB),1)
$line= ("`t...is dependancy for {0} size {1} `tIncremental={2}" -f $rtime, $rsize, $oneDrp.Isincremental)
$line >> $logfile
if ($oneDrp.representedpointintime -ge $enddate)
#stick to latest full ($oneDrp = dependents, $onerp = full)
$adjustflag = $true
$reselect = $onerp.representedpointintime
"<< Dependents newer than BEFORE date >>>" >> $logfile
Write-Host -nonewline "`t <<< later than BEFORE date >>>" -foregroundcolor white -backgroundcolor red
write-host "$line" -foregroundcolor yellow
else
#Ok, include current latest incremental
$reselect = $oneDrp.representedpointintime
write-host "$line" -foregroundcolor yellow
if ($reselect -lt $oneDrp.representedpointintime)
#we adjusted further backward than latest incremental within selection
$reselect = $rtime
$line = "Adjusted BEFORE date to be $reselect to include dependents to $enddate"
$line >> $logfile
Write-Host $line -foregroundcolor white -backgroundcolor blue
$line="`n<<< SECOND TO LAST CHANCE TO ABORT - ONE MORE PROMPT TO CONFIRM. >>>"
write-host $line -foregroundcolor white -backgroundcolor blue
$line >> $logfile
$line="Above recovery points within adjusted range will be permanently deleted !!!"
write-host $line -foregroundcolor red
$line >> $logfile
$line="These RP's include dependent recovery points and may contain co-located datasource(s)"
write-host $line -foregroundcolor red
$line >> $logfile
$line="Data source activity = " + $DSselected.Activity
$line >> $logfile
write-host $line -foregroundcolor white
$DoDelete=""
while (($DoDelete -ne "N" ) -and ($DoDelete -ne "Y"))
$line="Continue with deletion (must answer) Y/N? "
write-host $line -foregroundcolor white
$DoDelete=read-host
$line = $line + $DoDelete
$line >> $logfile
if (!$DSselected.Activity -eq "Idle")
$line="Data source not idle, do you want to wait Y/N ? "
write-host $line -foregroundcolor yellow
$Y=read-host
$line = $line + $Y
$line >> $logfile
if ($Y -ieq "Y")
Write-Host "Waiting for data source to become idle..." -foregroundcolor green
while ($DSselected.Activity -ne "Idle")
("Waiting {0} seconds" -f $wait) >>$logfile
Write-Host -NoNewline "..." -ForegroundColor blue
start-sleep -s $wait
if ($DoDelete -eq "Y")
foreach ($onerp in $RPselected)
#reselect is adjusted to safe range relative to what was requested
#--- if adjustflag not set then all up to including else only older because we must keep the full
if ((($onerp.representedpointintime -le $reselect) -and ($adjustflag -eq $false)) -or ($onerp.representedpointintime -lt $reselect))
$rtime=[string]$onerp.representedpointintime
write-host `n$line -foregroundcolor red
$line >>$logfile
if (($onerp ) -and ($onerp.IsIncremental -eq $FALSE)) { remove-recoverypoint -RecoveryPoint $onerp -confirm:$True} # >> $logfile}
$line =("---`nDeleting recoverypoint -> " + $rtime)
$line >>$logfile
"All Done!" >> $logfile
write-host "`nAll Done!`n`n" -foregroundcolor white
$line="Do you want to View DPMdeleteRP.LOG file Y/N ? "
write-host $line -foregroundcolor white
$Y=read-host
$line = $line + $Y
$line >> $logfile
if ($Y -ieq "Y")
Notepad DPMdeleteRP.LOG
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT]
This posting is provided "AS IS" with no warranties, and confers no rights.

Can't set in/out points on timeline

Hello there. I have just downloaded the trial version of Premiere Elements 12, which looks like it might have everything I want in a video editor except... it doesn't seem to have ability to set In/Out points (no button exists and hitting I/O has no affect, despite being on their list of keyboard shortcuts). I'm clearly not doing something right. Not being able to edit quickly via I/O/X feels like being in a car without a steering wheel. Please help!!

L Prickitt
I have already pointed out to you the Premiere Elements 12 ways to trim clips in Expert and Quick - including the Expert workspace Project Assets double click of file thumbnail there to bring up the Preview Window as well as the Quick workspace maneuvers.
I have observed that the I and O shortcuts work only after the Preview Windows is evoked in Expert workspace by double clicking the file in either Project Assets or on the Timeline. There are different considerations when Preview Windows is used and brought up in those two different ways - from Project Assets vs Timeline. You really do want to be double clicking the file in Expert workspace Project Assets to bring up the Preview Window for your trims.
However, whether in Expert (Timeline) or Quick workspace (Filmstrip), you can drag the edges of the clip to get a trim.
Your recent post (4) defines what you want to do.
- Drop video, sound and voice over clips onto the timeline (either with a mouse or shortcut keys)
- In the timeline trim the clips most effeciently (for me, anyway) by marking an In Point (by clicking on the I key) and then an Out Point (by clicking on the O key), then deleting the clip (by clicking on X or delete key).
I would ask this. You cite prior experience in what you want to do. What program did you use - was it other than some version of Premiere Elements?
I cannot see what you want to be done in Premiere Elements without bringing up and using the Preview Window which may be taking away the quick style that you described for getting this task done. Again, you cannot use I and O as you cite in the absence of the Preview Window.
Please consider. Knowing the program that you worked with previously would help in the understanding on my side. I have looked at prior versions of Premiere Elements and cannot see what you describe. So, I want to be sure I am not overlooking something.
We will be watching for further information in the hope that we can put together some sort of compromise workflow.
Thank you.
ATR

Getting rid of in and out points

To slo mo a bunch of clips at one time, I am putting the clips in the timeline, using paste attributes and then transferring them back to the browser to edit into my music video. After completing that step, they already have an in and out point. The in point in the beginning of the clip and the out point at the end of the clip. That means to do a cross dissolve, I have to delete the in and out points. I want to use paste attributes, but I hope I can transfer them back into my browser without the in and out points. Is that possible? Thanks for the help.

Pressing the Option and X keys together will remove In an Out points.
Option is marked "alt" on some keyboards.

How do I crop my in and out points.

I have marked my in and out points. I don't know the correct term to use since it varies between applications, but I want to delete the excess clip that is not in my in and out points.
Can someone help?

Final Cut Pro is a non-destructive editor, i.e. the original media is left unaltered.
In order to delete the material you're SURE you will no longer use, you can use Media Manager to build a new project with/without handles that contains copies of only the media you are using.
Like this:
This shows 1 second handles.
You can also export a self contained movie of your sequence if you've completed editing.
In either case, you'd then delete your original media.
Patrick

Deleting Mark In, Out Points

Similar Messages

Maybe you are looking for