Deleting multi-computer data for one computer

One Time Capsule was being used to backup two computers. One computer has failed. How can I remove its data without affecting the backups for the surviving machine In order to free up hard drive space? Thanks.

You just delete the sparsebundles for the said computer.. it is a very lengthy operation so strongly recommend using ethernet only connection to the TC.
See delete.
Q12 here. http://pondini.org/TM/FAQ.html
It is much faster doing the delete from windows.. just as a btw.. windows is actually less of a pain in some tasks.

Similar Messages

Delete G/L Accounts for one company code when transaction data exists

SAP transaction OBR1 can be used to reset transaction data.
If you execute this transaction for a specific company code, the FI transaction data of that company is deleted. Because of the procedure to keep FI and CO in line, also the CO data has te be deleted.
But you can not reset CO transaction data for one company code. You have to reset CO transaction data for a whole controlling area.
If you can not delete the FI and CO transaction data for a specific G/L account in one company code, you can not delete that G/L account.
There exists another solution for the deletion of FI and CO transaction data for one company code, and thus for the deletion of G/L accounts?
Thank you very much for your feedback.
Edited by: E. Deleu on Mar 3, 2008 3:42 PM

Helllo,
I believe the account group information is what you get when loading hierarchies. Please look into the hierarchy extractor 0GL_ACCOUNT_T011_HIER.
Regards,
Christoffer

Delete Transactional data for one (1) Cost element

Hi All.
How to Delete Transactional data for one (1) Cost element?
i know T code OKC3 but it is saying I can delete only at controlling area level,
I want to delete only data (Transactional) for one cost element .
Please let me know, Thank you ,
Paartha,

it is not possible to delete the data, if u want u can repost from one cost element to the another cost element if u are feeling the entry was posted to wrong cost element.
Otherwise if u want restrict the transactions further to that cost element, u can restrict through cost elmenet master where in u can select the direct postings and secondary postings etc.,
regards
madhav

User Profile Data for One Month in ST03N

Dear All,
I have one question for a similar requirement.
I want to see the User Profile data for last month (e.g.August)
I navigate through the same path as described by you.
ST03N- Expert Mode- Total (select period)-- User Profile (from analysis view)
even though I have selected One month period (August) ; I could see only the data for one week (1st August to 7th August)
Can you please advice how can I solve my purpose, if not this time but may be in future I should be able to see complete one month data.
Thanks in advance.
Best Regards,
Jayesh

Dear Shailesh,
Thanks for the very prompt and accurate response.
However we have this job scheduled on monthly basis in our productive system, still there is no data avaialable.
Kindly advice.
Best Regards,
Jayesh

Deleting/clearing chat history for one single cont...

I want to delete/clear chat history for one single contact!
I want to see this option with the next update! I also do not want the complicated 3rd party solutions!
What's the reason of not providing this easy thing for so many years?
You are not the one! I'll switch to Viber, if you insist on this!!!
The real pain is having no clever solutions for the paid-service you own.

Weird, so after clearing the cache a url using ajax
like this works
http://www.abc.com/?a=b
and this does not
http://www.abc.com/
Unfortunately, since each application running its own server will handle pages differently and have backend scripts that process the requests, there is not a whole lot we can do in the browser but clear the cache. It would require resources beyond this forum. If however, you can get in contact with the developer of that application and ask if this is expected, we would be happy to work with an example.
Please let us know how you would like to move forward with the investigation.Or if you would like to investigate further you can try the fake item in this add on to view the HTTP header in more detail (plain text as well): [https://addons.mozilla.org/en-US/firefox/addon/http-resource-test/]
Please let us know if this helps.

Deleting material movements data for IM

Hi,
I have to re-initialize the stock for IM using BX and similarly need to fillup the set up tables for BF and UM. I deleted the contents using LBWG TCode for the Application 03(Inventory Controlling). I checked the data for BX and UM and it is showing me 0 records after deletion. But when I checked for BF it is still showing me records. I am not sure how to delete BF data as well.
Please let me know your thoughts....
Thanks.

Hi,
I have a doubt in filling up the set up tables for BF. Which one is more preferable while doing it, either by Material Document Number or by Posting date? If I have to do it by Material Document Number then how will I come to know the range and what coulld be the Posting date if I use the later option? It runs forever if I give even 4 days as the posting date and gets cancelled. Say for example I have to load the data from Jan 2005 to till now then what should be my strateg? I mean for BX, BF and UM?
Please reply to this....
Thanks.

Help with multi-table mapping for one-to-many object inheritance

Hi,
I have posted on here before regarding this (Toplink mapping for one-to-many object inheritance but I am still having problems mapping my object model to my schema.
Object model
The Person and Organisation objects contain base information and have the primary keys person_id and organisation_id. It is important that there is no duplication of person and organisation records, no matter how many times they are saved in different roles.
There are two types of licenceholder in the problem domain, and the ILicenceHolder interface defines information and methods that are common to both. The PersonalLicenceHolder object represents one of these types of licenceholder, and is always a person, so this class extends Person and implements ILicenceHolder.
The additional information and methods that are required by the second type of licenceholder are defined in the interface IPremisesLicenceHolder, which extends ILicenceHolder. Premises licence holders can either be people or organisations, so I have two objects to represent these - PremisesLicenceHolderPerson which implements IPremisesLicenceHolder and extends Person, and PremisesLicenceHolderOrganisation which implements IPremisesLicenceHolder and extends Organisation.
The model is further complicated by the fact that any single Person may be both a PersonalLicenceHolder and a PremisesLicenceHolderPerson, and may be so several times over. In this case, the same basic Person information needs to be linked to several different sets of licenceholder information. In the same way, any single Organisation may be a PremisesLicenceHolderOrganisation several times over.
Sorry this is complicated!
Schema
I have Person and Organisation tables containing the basic information with the primary keys person_id and organisation_id.
I have tried to follow Donald Smith's advice and have created a Role table to record the specialised information for the different types of licence holder. I want the foreign keys in this table to be licenceholder_id and licence_id. Licenceholder_id will reference either organisation_id or person_id, and licence_id will reference the primary key of the Licence table to link the licenceholder to the licence. Because I am struggling with the mapping, I have changed licenceholder_id to person_id in an attempt to get it working with the Person object before I try the Organisation.
Then, when a new licenceholder is added, if the person/organisation is already in the database, a new record is created in the Role table linking the existing person/organisation to the existing licence rather than duplicating the person/organisation information.
Mapping
I am trying to use the toplink mapping workbench to map my PremisesLicenceHolderPerson object to my schema. I have mapped all inherited attributes to superclass (Person). The primary table that the attributes are mapped to is Person, and I have used the multi-table info tab to add Roles as an additional table and map the remaining attributes to that.
I have created the references PERSON_ROLES which maps person.person_id to roles.person_id, ROLES_PERSON which maps roles.person_id to person.person_id and ROLES_LICENCE which maps roles.licence_id to licence.licence_id.
I think I have put in all the relationships, but I cannot get rid of the error message "The following primary key fields are unmapped: PERSON_ID".
Please can somebody tell me how to map this properly?
Thank you.

I'm not positive about your mappings, but it looks like the Person object should really have a 1:M or M:M mapping to the Licenceholder table. This then means that your object model should be similar, in that Person object could have many Licenses, instead of being LicenceHolders. From the looks of it, you have it set up from the LicenceHolder perspective. What could be done instead if a LicenceHolder could have a 1:1 reference to a person data object, rather than actually be a Person. This would allow the person data to be easily shared among licences.
LicenceHolder1 has an entry in the LicenceHolder table and Person table. LicenceHolder2 also has entries in these tables, but uses the same entry in the Person table- essentially it is the same person/person_ID. If both are new objects, TopLink would try to insert the same person object into the Person table twice. I'm not sure how you have gotten around or are planning to get around this problem.
Since you are using inheritance, it means that LicenceHolder needs a writable mapping to the person.person_id field- most commonly done through a direct to field mapping. From the description, it looks like roles.person_id is a foreign key in the multiple table mapping, meaning it would be set based on the value in the person.person_id field, but the person.person_id isn't actually mapped in the object. Check to make sure that the ID attribute LicenceHolder is inheriting from person hasn't been remapped in the LicenceHolder descriptor to a different field.
Best Regards,
Chris

Deleted Microsoft User Data for Entourage- please HELP!!

I believe I deleted my Microsoft User Data for Entourage. Is there a way for me to get it back? I thought I backed it all up to my MYBOOK, external hard drive, but apparently It only accepted some of the items in the folder! (and not the User Data one!)
Any way to reverse this or find it after the trash was emptied??
It has ALL of my emails, contacts, saved emails, etc
PLEASE HELP
I will be forever grateful!
vicki

Basics of File Recovery
If you simply put files in the Trash you can restore them by opening the Trash (left-click on the Trash icon) and drag the files from the Trash to your Desktop or other desired location. OS X also provides a short-cut to undo the last item moved to the Trash -press COMMAND-Z.
If you empty the Trash the files are gone. Recovery is possible but you must not allow any additional writes to the hard drive - shut it down. When you delete files you erase only the directory entries, not the files themselves. However, the space occupied by the files has been returned to the system as available for storage. Writing to the drive will then eventually overwrite the space once occupied by the deleted files in which case the files are lost permanently. Also if you save a file over an existing file of the same name, then the old file is overwritten and cannot be recovered.
If you stop using the drive it's possible to recover deleted files that have not been overwritten with recovery software such as Data Rescue II, File Salvage or TechTool Pro. Each of the preceding come on bootable CDs to enable usage without risk of writing more data to the hard drive.
The longer the hard drive remains in use and data are written to it, the greater the risk your deleted files will be overwritten.
Also visit The XLab FAQs and read the FAQ on Data Recovery.

Deletion of master data for 0CS_ORDER

Hello Friends,
I have a requirement to enhance an IOBJ 0CS_ORDER with Order status values(2 new statues are added). I have done the enhancement part to the extractor in the source system side. Now after replication in BW, to add 2 new IOBJs in CS_ORDER, I need to delete the master data.
When I try to do this, I get the msg that some master data could not be deleted.
This is fine as we have transaction data loaded for large no. of objects which has 0CS_ORDER.
In dev, I have deleted the master data using SE14 for tables P, S , X, T.
My concern is in Production, I have huge volume of transaction data. To transport the changes, I need to delete master data. But this would require deletion of Transaction data from all IP where CS_ORDER is used.
If I do so using SE14, and tranport the changes and later load MD to CS_ORDER. Will this cause INCONSISTENCIES?
What can be other possible ways??
Please share your opinions.
Many Thanks,
VA
Edited by: Vishwa Anand on Sep 2, 2010 5:36 PM

Definitely Yes.
It will damage all the SID connections earlier which this master data had with the other objects likes transactiona objects (ODS, CUBES etc). Even You can not access the data from the cube or ODS where the navigational attributes are flagged for reading.
So do not use SE14 for deletion of MD. This is very specific to use.
You can delete the Master data as long as its not been used in other targets so that you can refill it easily and also there wont be any inconsistencies..
Hope this is clear for you..

Allowing "Reader Users" to Save MULTIPLE Unique Sets of Forms Data for One Form

I own Acrobat Pro X. I use it to create many documents in my law practice. I need to deliver a contract form to a client that the client will use again and again and again... The client only owns Acrobat Reader. I need this to be like a "template" in Microsoft Word. The client needs to be able to fill-in the fillable fields on the document that I have created, then print and save it (e.g. as "Jones.pdf"), then fill it with new data and print and save it again (e.g. as "Smith.pdf"). This process may need to be repeated hundreds or thousands of times. Sometimes the client will need to reopen a document (data set) that was previously saved and printed and see it as it was last printed (so, to load "Jones.pdf" and see it as it was created). Sometimes the client will need to send a "filled" PDF to one of his customers, where the client's customer can print the document, but not change any of the fields (much less the body of the document, of course). So to sum up:
* Attorney creates contract with fillable fields in Acrobat Pro X and sends to client;
* Client uses PDF created by attorney to create, print and save an infinite number of unique 'data sets' for the document, any of which can be opened and printed at any time; and
* Client sends locked-down, un-changeable PDF to Client's customer for customer to print, but not change.
All of this needs to be able to happen without the Client ever buying Acrobat. Is this possible? I'm aware of File > Save As > Reader Extended PDF > Enable Additional Features, but I cannot figure out if this will work, since I don't use Reader on my pc.
Surely this scenario is faced by document creators often. However, I tried and failed to find a set of search terms which would reveal discussion threads that were relevant to this query.

I apologize for being unclear. I'll try to clarify the facts.
1. I have written a custom subcontract agreement for one client. This is the only client that I will ever give this particularl document/subcontract. My client will *never* send the data or the document back to me. Once I turn over this document to my client, it is from my perspective, a one-time, one-way transaction.
2. My client
Will be the only person who will ever put data in the fields (using Acrobat Reader);
Will create hundreds or thousands of unique subcontracts using the document that I have created, but the only difference between each will be the data that my client has put in the fields;
Needs to be able save each unique set of data as a unique pdf (jones_1.pdf; smith_2.pdf; etc.);
Needs to be able to email the completed document to his customer in a way that his customer cannot modify the document, but can view it, print it, sign the paper printout and snail-mail it back.
3. My client's customer
Should be able to view and print, but be unable to change anything in the document;
Will not need to sign the document electronically (there will be no digital signatures)
Users of Microsoft Word are familiar with the concempt of templates. When you create a new document based on a template, the content and formatting can be changed in each new iteration made from the template, but the original template is not changed. I could give my client the subcontract as a Word template, but his staff could easily or accidentally change important language that I don't want them to be able to change. For the client's own protection, I want the client only to be able to change data in the fields that I've designated. This sort of scheme is impossible using a Word document or template. I hope it's possible with a PDF.

How to store call log data for one month?

HI,
I am using iPhone 4S with iOS 7.1.2. I would like to know that is there any setting for storing call log data for latest one month..?

That's not how it works. Recents is limited to exactly 100 calls, not a time frame. If you need your call history for a specific time frame, look on your carrier's website. Most carriers will permit you to login to your account & view call history.

Need a report column to hold data for one row only

Hey Guys,
I have a report which has a column that links to another page in my APEX application.
There is a requirement where only one of the rows in this report needs to have a link so I need the column to show the page link for one row and one row only.
The report will have about 5 rows at a time so is there a way to just make this link appear for the one row(it will be the top row) in the column attirbute in APEX? or can this be done in the SQL for the report?
Any help is much appreciated
Thanks
-Mark

Hi
The only way (I believe) to do this is within the SQL. Then you just wrap the column in a CASE statement and if it meets your criteria then build up the link and if not then display normally.
Something like this...
SELECT ename,
       CASE WHEN empno = 7839
       THEN '<a href="f?p='||:APP_ID||':4:'||:APP_SESSION||'::NO::P4_TARGET_ITEM:'||empno||'" >'||empno||'</a>'
       ELSE TO_CHAR(empno)
       END empno
FROM empCheers
Ben

Conceal data for one year in PowerPivot

Hi,
In the attached file (http://1drv.ms/1unwwgK), I am trying to compute the revenue for previous year . Refer to the calculated field formula named
Revenue2008_sec1q2
=if(HASONEVALUE(sec1q2[Year]),CALCULATE(SUMX(sec1q2,sec1q2[Price]*sec1q2[Quantity]),sec1q2[Year]=2008),BLANK())
I have years in the Column labels and Months in the Row labels. While the figures are all correct, I want the figures appearing for the 2008 column to appear as blank.
What modification will I have to bring about in the formula above.
Please help.
Regards, Ashish Mathur Microsoft Excel MVP www.ashishmathur.com

Hi Ashish,
You could try something like this:
Revenue2008_sec1q2_New:=
IF (
HASONEVALUE ( sec1q2[Year] ),
IF(
VALUES(sec1q2[Year]) <> 2008,
CALCULATE (
SUMX ( sec1q2, sec1q2[Price] * sec1q2[Quantity] ),
sec1q2[Year] = 2008
BLANK ()
Regards,
Michael Amadi
Please use the 'Mark as answer' link to mark a post that answers your question. If you find a reply helpful, please remember to vote it as helpful :)
Website: http://www.nimblelearn.com
Blog: http://www.nimblelearn.com/blog
Twitter: @nimblelearn

Problem in Extracting Data for one cube to another

Hi,
This problem exists in Quality Environment of 3.x version.We have two financial cube.
Cube A1 - Sourced through R/3 system (delta update) and Cube B1- Sourced through A1 cube.(Full update). These two cubes are connected through update rules with one to one mapping without any routines.
Basis did a copy of back-end R/3 system from Production to Quality server.This happened approximately 2 months back.
The Cube A1 which extracts delta load from R/3 is loading fine. but for the second cube, (fextraction from previous cube A1) i am not getting full volume of data instead i m getting meagre value but the loading shows successful status in the monitor.
I tried through giving conditions in my infopackage (as it was given in previous year's loading) but then also its fetching the same meagre volume of data.
Any lights on this will be more appreciable...
Swami

Hi Swami
As you said below issues is in QA system, please check with below and revert back to me if this doesnt solve your problem
Please check update rules of InfoCube B1 for all key figures and characteristics, you may find certain objects with "NO UPDATE", (this happens sometimes while copying production system to any other system), if you find any object with"NO UPDATE" then compare this object mapping with Production system update rules, if its not sync then change update mode accordingly
Please check number of characteristics and key figures existing at InfoCube B1(production) and compare with InfoCube B1 (QA), if this doesn't match then check for missing object and add to InfoCube B1
Hope this will solve your issues!
-DU

Problem loading text master data for one value

Hi guru's,
We are trying to load texts for an standard characteristic (data element : Char 30). The problem comes with characteristic value 4700112703/04/19 , all other values load correct but this one is recognized by SAP as an incorrect value. It seems, by the PSA explanation, that the / is incorrect.
Do you know why this value is incorrect ? Is there any way to load this record to the characteristic ?
Thanks in advance.

Hi,
In RSKC specify the value as ALL_CAPITAL which would allow all the necessary and SAP supported values(including /) to come into BW.
Refer this blog for more information
/people/sap.user72/blog/2006/07/23/invalid-characters-in-sap-bw-3x-myths-and-reality-part-2
Regards,
Rik

Deleting multi-computer data for one computer

Similar Messages

Maybe you are looking for