Deleting Network

How to completely remove a network from the computer including the remember me password

Passwords are in Keychain Access in /Applications/Utilities folder; launch it and highlight items of interest and then delete.

Similar Messages

  • How i can restrict to delete network if PR was assigned.

    Dear Experts,
    How i can restrict to delete network if PR was assigned for that network in CJ20N.

    Hi....
    i assume you have  created a exit project in CMOD and then implement the exit mentioned.
    Could you add the following code in your exit code
    IF SAP_ACTVT = '06'.
       SAP_X_ACTVT = ' '.
    ELSE.
       SAP_X_ACTVT = 'X'.
    ENDIF.
    and please also activate it..
    what happens if you try to delete the network in this case?
    Cheers
    Panagiotis
    ps: activity 06 is the deletion. That means if you try to delete the network the system would popup an error message not allowing the deletion.
    (i have tried it and it works)

  • Recover a deleted network.

    Does anyone know how to recover a deleted network?
    Regards

    The network is like a production order, only the status DLFL could be revoke, if you have set the status DLT on the network, or if you have already archived this network with archive object PP_ORDER in transaction SARA, then there is no much way to get it back.

  • Deleted Network Icon in Side Bar. How do I replace. G5 Power Mac

    Deleted Network Icon in Side Bar. How do I replace. G5 Power Mac

    How about this one. Can't boot from 2nd internal hard drive. Apple logo then Blue Screen. Have run Tech Tool Pro and disk utilities to no availe. Went I open from main drive I see and document Icon and a "~". Is that a mounting point or should I delete it. The second drive is a clone of the Main.

  • Deleting Network Discovery Data

    Is there a way to delete network discovery data from the Manager?

    Dan,
    It appears that in the past few days you have not received a response to your
    posting. That concerns us, and has triggered this automated reply.
    Has your problem been resolved? If not, you might try one of the following options:
    - Visit http://support.novell.com and search the knowledgebase and/or check all
    the other self support options and support programs available.
    - You could also try posting your message again. Make sure it is posted in the
    correct newsgroup. (http://forums.novell.com)
    Be sure to read the forum FAQ about what to expect in the way of responses:
    http://support.novell.com/forums/faq_general.html
    If this is a reply to a duplicate posting, please ignore and accept our apologies
    and rest assured we will issue a stern reprimand to our posting bot.
    Good luck!
    Your Novell Product Support Forums Team
    http://support.novell.com/forums/

  • Can't login to wireless network. Deleted network but still time-out trying to login without asking for new password

    Well I am downgrading (if you can call it that). Leopard and Snow leopard are just superior OS's for power users. All the fancy stuff put in Lion actually slowed it down considerably among all the other bugs..... but anyway
    I changed my network password today. My mbp on lion cannot access the network. I deleted the saved names in network preferences, I rebooted my modem an router, even cleared the DNS cache in Terminal. It still tries to connect to the network and times out... without asking me for the new WEP password I have put on the network.
    My other laptop on snow leapord does what it is supposed to. Deleted the network name in network preferences, clicked on network name to get online, and then it requested the password name. Why doesn't Lion do this??
    Like I said before I did all the above. I don't know what else to do. I also manually deleted the keychain passwords. Still no luck. I guess I have to rename my network lol.

    Access the router's admin area and put in a new password.

  • Cannot delete networks from already removed Demo VM's

    I have 2 networks that were created when I spun up 2 demo VM many months back and for some reason I cannot delete them give the below error
    Virtual network 'AX2012R3-Demo-R3DemoErik-0d6514cdf4197127' is in use and cannot be deleted.
    Virtual network 'AX2012R3-Demo-NHDOLC-60668dc52e30f509' is in use and cannot be deleted.
    The VM's, Disk and storage are all gone for many months?
    Any Ideas?

    Hi,
    From the error it appears that you may still have something yet to be deleted: What about a gateway, cloud service or website?
    Please review this article:
    https://msdn.microsoft.com/en-us/library/azure/dn195495.aspx?f=255&MSPPError=-2147217396
    Cheers
    Amjad

  • How to permanent delete Network,Activity,WBS through BAPI ?

    Hi,
    I am using BAPI_PROJECT_MAINTAIN for creating Network,WBS and Activities. I am successfully able to create the above things.
    However when I delete using the above BAPI, they are not deleted physically from UI. They remain visible on SAP GUI with delete flag set.
    Is there any BAPI available through which I can delete them physically, so that deleted items should not be visible on SAP GUI.
    Regards,
    Vikas Khandpur

    Transaction SARA is how to delete data for operative Networks/activities and WBS elements  the Archive object is PS_PROJECT on the standard side the archive object is PS_PLAN however it is not just as simple as knowing this the process is a little more involved and the objects need to be configured correctly.
    Dave

  • Deleting network connections

    How to I make Mac forget (erase) previous network connections?
    When I bought my iMac two months ago, I networked it (via ethernet) to my old PC in order to transfer files between both computers.  I set this up using the wizzard that launched automatically as part of the computer setup process.
    Up until now, the connection established itself automatically.  As of yesterday, I can't connect to my PC from my Mac.  I keep getting the following error message "There was a problem connecting to the server "XXX".  Check the server name or IP address, and then try again. If you continue to have problems, contact your system administrator." 
    I have googled this to death, and can't seem to find a solution that works.  So, I figure the best way would be to re-create the network connection from scratch.  Problem is, the Mac doesn't seem to want to forget.  Each time I try deleting using System Preference > Network route, the former network keeps re-appearing in Finder. 
    This is very aggravating.

    Try control clicking Raid then click Remove. That way it's not being moved to the Trash, just the Finder window.
    If that worked, do the same for Raid backup.

  • Deleting network conection from airport inabled Imac

    I'm tying to figure out how I can completely remove a network connection(s) from my Intel based mac. I've done the configure thing and deleted that part but it still shows up when I turn on the airport. If you go into the network location for airport you see multiple listing of connections, so I figure only way to remove this is to completely wipe it of the system. So I wanna know how to do this, can any body help?

    Airport scans the area and automatically lists all detected networks and lists them accordingly. You can't delete these entries. However, you can configure the wireless to connect only to preferred networks. Open Network preferences, select the Airport port, click on the Advanced button. Delete all unwanted networks from the Preferred Networks list. However, this will not stop Airport from scanning for active networks within range and listing them in the menu bar status.

  • Deleting Network Account Profile

    Hello,
    I'm a very new Mac user as it's very obvious with the nature of my problem. I accidentally created a new network account (Wlanhaus2). My current network account is Wlanhaus and would like to get rid of Wlanhaus2. Unfortunately, I can't seem to find where the profile is stored so that I can delete it. Can anybody help? Thanks in advance!

    I'm having the same problem; can't figure it out and I've been working with Macs since 1984...

  • MacOS keeps looking for Deleted Network Drive

    I deleted a LaCie Network Drive and at every startup I get an error messagesaying the drive "Network Space AFP" cannot be connected. Any way to get rid of this message? I thought I deleted all the La Cie Software.

    Hi shuffleq,
    Have you checked Login Items?
    How to check:
    go to menu bar
    click on the apple menu
    chose system preferences
    click on Accounts
    if the lock in accounts is locked, click on it and type in your passwords, and click ok
    click on your account name from the list on the left
    then click on the tab labeled "Login Items"
    There may be an item in the list with the name of the drive and a folder or file that was on the drive. If your not sure witch one is it. you can try right clicking on an item in the list and choosing "show in Finder."
    if you do find a Login item that is for "Network Space AFP" click on it one time, then click on the "-" to remove it from the list.

  • Can we delete network header and then use it again under a WBS?

    Hi All,
    I have an issue where user wrongly create network header and activity not under WBS/project. The situation :
    There is a project / WBS called ABCD. User require a network header ID called RSKA005100S1 under the WBS. However, user create the master network header RSKA005100S1 not under WBS. How can we assign network RSKA005100S1 to be assigned in the WBS ABCD, coz when i tried to create the same network, it says order already exist.
    CHeers,
    Nies

    Hil,
    i hope network header is not released and no cost posting done in your case !!
    Select Network Header RSKA005100S1 and goto assignments tab. assign the WBSE ABCD here, then system shifts the network header assignment to ABCD automatically. No need to delete existing one and creating new one under ABCD.
    Hope this helps you !
    Br
    Hari.

  • Need to constantly delete networks & keychains to reconnect to airport

    Up until Thursday night my MacBook (OS 10.5.6) connected to the wireless Internet just fine. Since Friday morning, it will not reconnect to the airport after closing it or waking up from sleep. The weird thing is that I have not installed any new software or run any updates that could have caused this sudden connectivity problem. My husband's Macbook Pro (OS 10.4.11) still connects without a problem.
    When I try to re-connect I get a timed out error message. I can re-connect by walking my laptop over to the base station (Airport Express) in my husband's office. Once it's close enough to it, it will re-connect and I can walk back to my office where it will stay connected until I close it or it goes to sleep. Then we start all over again... Not my idea of the ideal wireless set-up
    I have seen plenty of discussion threads on this, and one of the suggested solutions was to delete all the networks and keychain passwords and try to re-connect. That works, except that I have to do it every time I open my laptop or wake it up from sleep. Very annoying...
    I would be grateful for any suggestions on how to fix this. The airport card seems to work fine, because once connected, it will stay connected (strong signal, fast download and upload speed). I can't figure this one out!

    Any suggestions? Please?
    I've also noticed that if I just ignore the timed out message and keep hitting the join network button long enough (maybe 10-15 times) it sometimes connects. Completely random!

  • Unable to delete network

    I'm trying to delete a virtual network, but I'm not allowed to because the portal says it is in use. It is not in use, and I have tried everything I can think of to delete it. The network was created using the preview portal. Mabye there is a bug there
    preventing deletion?
    Hallis

    Greetings, Hallis!
    Please check if there are any VMs associated with that vNet. If yes, please delete them retrieving the disks from them. Reference:
    https://msdn.microsoft.com/library/azure/dn195495.aspx
    Check if the gateway is also removed from vNet.
    Delete the gateway: Remove-AzureVnetGateway -VNetName "xyz"
    Ensure the Point-to-Site VPN connection checkbox is unchecked (if enabled) as this will prevent the VNET from being deleted. Click Save Changes.
    Thank you,
    Arvind

Maybe you are looking for