Deleting of PAT and ATT File

Hi ,
Can anyone help me 1. in which table PAT and ATT is store. 2. If i want to delete both file then how can i delete this?
3. I want to see all tables , then which T-codes i have to used for this?

Hi Devendra,
1.PAT and ATT files get stored in directory <DRIVE>:\usr\sap\trans\eps\in
2.You can delete them at OS level.GO to this directory and delete them as you do normally when deleting a file,be it in Windows or Unix.
3.You can use tcode SE11 for dispalying the tables.
Hope this helps.
Thanks,
s<i><b>A</b></i>mik.

Similar Messages

How to delete all projects and accompanied files from Adobe Premeiere Elements 13

I would like to delete all projects and files and start anew, but I cannot find a clear enough instruction how to do it. Please help'

vitprod
Same other versions as well.
There is no one delete button that wipes away the project file (.prel) and the project's assets. You need to go to the save locations of the project file (.prel) and its assets and delete
each one by one wherever they are saved UNLESS you pre-plan and, before the project is created, set up a particular project so that the project file with assets goes to its own folder instead of each component of the project going into a common place for Premiere Elements files and folder where you have to pick out the materials for deletion one by one by name.
Answers
Default type situation
If left at defaults and if your Premiere Elements 13 is running on Windows 7, 8, or 8.1 64 bit, go to Libraries/Documents/Adobe/Premiere Elements/13.0 and, in the 13.0 Folder, delete standalone files with your target project's name and delete files with your target project's name in the folders found in the 13.0 Folder.
Plan Ahead
Edit Menu/Preference/Scratch Disks - Set all to Same As Project.
Create a new folder at a hard drive location of choice.Then point the project file to that folder for the Save In.
Tip: When the Expert workspace of the new project opens, go to File Menu/Save As. Name the project and set the new folder created as the Save In of the Save Project dialog.
Please review and consider and then let us know if any of that worked for you.
Thanks.
ATR

Deleting Capture scratch and Render files

When and how should one go about deleting capture scratch files and render files?
seems alot of folks say to transfer them to disc.... do you have to save them?
i mean if you save the time line project (to re-edit later) and save a dvd proj, and a disc img. and even a copy of the movie/media as qt file -----why do you need to save all the cap scratch and render files???????
please educate me.
thanks
tim

Whoops - only half your questions answered, so I'll try harder:
> i mean if you save the time line project (to re-edit
later)
It's the Media Files in the Capture Folder that are the heart of the project. If you delete those, the Timeline will contain only Offline Clips with nothing to re-connect to.
> and save a dvd proj
Same answer as the QT Movie - only worse! The DVD version will be highly compressed and you'll lose a lot of quality if you re-edit it.
If the project is very small, you might be able to put your FCP project file and the Media Files on a Data DVD - but it will have to be VERY small. The Media Files are BIG.
Andy
G5 Quad 8GB. 250+500 GB HDs. G-Raid 1TB. FCP 5.1.1. Shake 4.1. Sony HVR Z1E Mac OS X (10.4.7)
"I've taught you all I know, and still you know nothing".

Deleting User Account and associated files

How can I delete a user and the accounts associated files and documents ONLY for that user account?

Thanks for the speedy responses. No, I'm not trying to restrict users. I am selling my iMac and wanted to leave the programs in tact for the new user and just wipe everything off that is associated with me. I have MS Office Suite on the iMac and offered to leave it there for the person I'm selling to since I don't use it anymore anyway. I think in deleting my user account, I lost the Office Suite. I'm just in the middle of it all right now so not 100% sure. Thanks so much for your good help.

Deleting Orphaned Preferences and Other Files

Under Classic there were a couple of apps that would seek out and list orphaned preferences and other files from applications that had been deleted from the computer. There are some UNINSTALLER apps for Leopard, but I can't seem to find any that will list orphaned files for deletion. What I want to do is get rid of orphaned files from apps that I probably hand-deleted some time ago.
Anyone know of a solution?

Uninstalling Software: The Basics
Most OS X applications are completely self-contained "packages" that can be uninstalled by simply dragging the application to the Trash. Applications may create preference files that are stored in the /Home/Library/Preferences/ folder. Although they do nothing once you delete the associated application, they do take up some disk space. If you want you can look for them in the above location and delete them, too.
Some applications may install an uninstaller program that can be used to remove the application. In some cases the uninstaller may be part of the application's installer, and is invoked by clicking on a Customize button that will appear during the install process.
Some applications may install components in the /Home/Library/Applications Support/ folder. You can also check there to see if the application has created a folder. You can also delete the folder that's in the Applications Support folder. Again, they don't do anything but take up disk space once the application is trashed.
Some applications may install a startupitem or a Log In item. Startupitems are usually installed in the /Library/StartupItems/ folder and less often in the /Home/Library/StartupItems/ folder. Log In Items are set in the Accounts preferences. Open System Preferences, click on the Accounts icon, then click on the LogIn Items tab. Locate the item in the list for the application you want to remove and click on the "-" button to delete it from the list.
If an application installs any other files the best way to track them down is to do a Finder search using the application name or the developer name as the search term. Unfortunately Spotlight will not look in certain folders by default. You can modify Spotlight's behavior or use a third-party search utility, Easy Find, instead. Download Easy Find at VersionTracker or MacUpdate.
Some applications install a receipt in the /Library/Receipts/ folder. Usually with the same name as the program or the developer. The item generally has a ".pkg" extension. Be sure you also delete this item as some programs use it to determine if it's already installed.
There are also several shareware utilities that can uninstall applications:
AppZapper
CleanApp
Yank
SuperPop
Uninstaller
Spring Cleaning
Look for them at VersionTracker or MacUpdate.
For more information visit The XLab FAQs and read the FAQ on removing software.
If you have uninstaller software already installed then it should, typically, alert you to associated files that you may want to delete. But they will not work for applications you have deleted prior to installing the uninstaller software.

Unable to configure Reporting Services 2012 after using 'netsh http delete urlacl' command and .EXE file also.

One of my servers quit responding during some troubleshooting of another issue and when I try
to reconfigure it I am receiving Results as follows:
Reserving url http://+:80
The URL has already been reserved.
It appears to me that there is something with the Virtual Directory that is not allowing me to use it or
overwrite it. If I change the name or the port the new configuration works fine, however this is part of a scale-out test environment and I need to keep the virutal directory names the same.
I have uninstalled and reinstalled SSRS in an attempt to resolve, but that did nothing to this issue.
I have used 'netsh http delete urlacl' command and deleted saved urls also but still am facing issue.
How can I manually list, delete, or edit Virtual Directories in SSRS 2012?

Hi Syed,
Based on my research, the issue can be caused by the default values for Report Server Web Service and Report Manager has already been reserved. In order to trouble shoot this issue, please refer to the following steps:
To check this issue, we can run the following command in the command windows:
netsh http show urlacl | find "Report"
It should returns the reserved URL as below:
Reserved URL :
http://+:80/ReportServer/
User:
Reserved URL :
http://+:80/Reports/
User:
Then we can delete the reserved URLs with the command below and recreate them to fix this issue:
netsh http delete urlacl http://+:80/ReportServer/
netsh http delete urlacl http://+:80/Reports/
Reference:
http://fix.lazyjeff.com/2011/12/sql-server-2008-r2-report-server-web.html
Hope this helps.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Deleting Unnecessary iTunes and Quicktime Files

Having installed and subsequently updated iTunes and Quicktime (with both programs being parts of one update "package"), I believe I may have many unnecessary files on my machine which Apple's installation and updating processes did not throw out or which are created when the programs are used but not thrown out after usage.
Can you tell me if I can safely delete the files in the following folders?
In the location C:\documents and settings\all users\application data\apple computer\installer cache\, the files in the following folders, which together use up 92MB of disk space: Apple Software Update 1.0.2.1, iTunes 7.0.2.16, iTunes 7.1.0.59, QuickTime 7.1.5.120.
In location C:\documents and settings\myname\local settings\application data\apple computer\quicktime\downloads\, the set of folders and subfolders which collectively contain 37MB of files with the extension .qtch.
Thanks.

Thanks for your reply, but what you're referring to has absolutely nothing to do with the problem I described in my post. You described how to change the display language WITHIN iTunes. My problem is the target and name of the start menu shortcut "Om iTunes", which on my PC opens a Swedish rtf file. Changing the iTunes language does not change the name and/or target of the shortcut.
The problem is that the iTunes (and QuickTime) installers assume I understand Swedish if my English Windows XP PC is configured to use Swedish date, time and currency formats. This is not necessarily the case, as I tried to explain in my original post.

I need a clean install. I deleted the profile and program files, but some settings are kept. What do I do?

Bookmarks and plugins are gone, as they should be, but my customized physical options are not gone, so I know that I am not getting a clean install. Also, the problem I am having with Firefox (loss of response to mouse input) remains. For example, I cannot use the pull down below called "This Happened".

Hi dahuns,
The [[Backing up your information]] Knowledge Base article should have the locations of all the stored files.
You could also try starting Firefox in [[Safe Mode]] and resetting everything to default.
Hopefully this helps!

How delete temp and cache files from MBA HD?

please let me know how to delete temp, logs and cache files...

Start up in Safe Mode.
http://support.apple.com/kb/PH11212

TPS and TPDF Files Not Deleted by Distiller

I just upgraded from Acrobat 6.0 to 8.0. Now when I save a FrameMaker book to PDF, Distiller does not delete the TPDF and TPS files. Does anyone know why this is happening and what I can do about it?
Thanks,
Stephen Liddiard

When you save a FrameMaker book as a PDF file, (File > Save Book As) FrameMaker creates a temporary PostScript file with a file type extension of TPS. After it has finished writing the TPS file, FrameMaker invokes Distiller to process the TPS file into a PDF file. As part of the process of turning the TPS file into a PDF file, Distiller creates a temporary PDF file with a file type extension of TPDF.
With version 6 and earlier versions, Distiller cleaned up after itself by deleting these files. With version 8, it leave these files behind.
I'd like to know if this is a bug or if it's a new feature. If it's the latter, I'd like to know how to disable it so that Distiller goes back to cleaning up its junk.
(I am using FrameMaker 7.0)
Regards
Stephen Liddiard

Deleting PAGE and ROLL files

Hello,
We are migrating to ECC6 Ehp4 / WAS701.
In our current systems, during offline backups, we delete the PAGE and ROLL files:
`/bin/rm /usr/sap/<SID>/DVEBMGS<nr>/data/PAGFIL<nr>`;
`/bin/rm /bin/rm /usr/sap/<SID>/DVEBMGS<nr>/data/ROLLFL<nr>`;
1. Is still worth doing this in WAS700 EhP1?
2. What is the benefit of doing so?
Thanks in advance for your answers.

Hi Benoît,
I was thinking that my colleagues were doing that to clean a possible corruption or something like that.
Would you know if it was the case with old version of Netweaver
I didn't face with that problem from release 3.0F on. It might be very specific case.
If it is just to gain space temporary, it is not really useful.
Yes, you are exactly, correct,
Best regards,
Orkun

Could not find .java and .class files...

I am working on Windows Vista operating system.
I am able to access the .java which I created and also .class files from the command prompt.
But I am not able to find those files in the bin folder in Windows Explorer.
I want to delete some .java and .class files. When I use the delete command on the command prompt , I am getting ---- could not find the file.
Can anyone help me...

Hey everyone,
I found the answer!
If the command prompt application is run as administrator(since it is windows vista), the created .java files as well as .class files will be stored and can be seen in the bin folder.
However, I could not locate the .java files (and also corresponding .class files) which I created previously.

Still loose ability to drag and drop files in Project pane.

In the last two weeks, I've had two instances where I lost
the ability to drag and drop files within the Project pane.
However, here's the kicker...the problem doesn't manefest itself
until after I end my session, close RH, then restart the computer
and restart the project. That means I don't know that I'm working
in a broken project until AFTER I've zipped up and saved the
current project. I tried addressing this in this orum once already
and I received some suggested fixes (included in the list below)
but it never fixed and and has happened again.
Some pieces of information:
- I've deleted the .xpj and cpd files, no joy.
- I've regenerated the output, then tried to move a file, no
joy.
- I've generated a CHM (supposedy to update other files), no
joy.
- I'm not attempting to move a file to a directory where that
name already exists
- If while I'm having the problem, I create a nw project, new
folders, and new topics, they move around fine.
- If I create a topic IN the directory with the problem, I
cannot move that file.
- I've zippd up a broken project and sent it to Adobe. They
openned it and it was fine. They zipped it back to me and it still
wasn't.
- If I create a new project, replicate my directory
structure, and import the htm files into the new structure (a
ubdirectory at a time), the files move fine.
- I'm only working local on Windows 2000 with 30 GB of disk
space, and I have not installed anything else on the computer in
the last 2 weeks.
- I've escalated this to the next level at Adobe and am
sitting by my phone with my headset waiting for the call back
"within the next two hours".
Anyone seen this?

quote:
Originally posted by:
Amebr
Could the files have somehow been set to read-only?
I'm not sure on the exact details of your process, but if you
open the project after unzipping it, perhaps the unzip process has
changed that file attribute...?
I appreciate your response, but no...all files and
directories had all permissions allowed. The zip process wasn't
involved until aftrer the problem showed itself...I zip just for
backup with the hope that I never have to go to it. It was my
working project that lost the ability to move files. It just turns
out that after it happened and I went to the zip that it showed
that the problem had affected the files before I zipped them and
therefore, the zip was of the broken set.

.plist and .cs files, how many should there be?

I continue to have the 'part of the song could not be played' problem. I have tried all of the suggestions on how to prevent this with no success. One thing I have noticed is that when I go to delete the .plist and .cs files, there are 2 copies of each that show up in finder. Is this normal? I am wondering if this may be a clue as to why the problem continues. Could GB be somehow running a duplicate copy of each project, doubling the processing load? Any thoughts are appreciated. Thanks.

Each user has his own. This is where items specific to each user are stored - caches, preferences files, login items, etc. In Lion these folders are hidden, but still there.
There is also one at the top level of the hard drive. This is where resources shared between users are stored - fonts, application support files, etc.
There's also one in the System folder, that you may look in, but do not touch.

In making a "highlights" movie, using clips from different imported iMovie events, can I delete the larger iMovie event file from the Events browser and still work w the smaller clips in the Projects browser w/o having the larger files still loaded?

I have sucessfully imported 150 Sony digital 8mm movies (each one hour in length) into iMovie as 150 iMovie events. I have since successfully converted them from their original 13 Gb (.dv) file to an exported smaller 1.3 Gb (.4mv "large file") movie that I am happy with, using the iMovie projects browser. So now I have 150 " .4mv" movies on my internal HD as well as about half of my original raw data " .dv " movies on my internal hard drive.
Due to their large size (over 2 Tb), I do not have all the larger raw data (.dv) files on my 2Tb internal drive, just about half of them. What I want to do now is to create a new project in the Projects browser for each of my kids, and reload, starting with Tape #1, each of these larger files and do a highlights movie for each of my kids, wherein I pick out smaller clips from each 1 hour .dv iMovie event and paste them into the appropriate kid's Highlights project in the Projects browser.
Here's my question: If I load the first 5 large files back onto my internal HD, and paste in various shorter clips into each of my kids' Highlights project, and then if I delete those first 5 large files (they are backed up on 2 other 3Tb external HDs), can I keep doing this (reloading the next 5 large .dv files to work with), and ultimately take each of my kid's Highlights project and export as a .4mv movie EVEN THOUGH the earlier large .dv files are no longer on my internal HD, OR does my iMac need to have all these larger files loaded on my internal HD for me to eventually export each of my kid's Highlights project to a .4mv movie?
I have a 2011 era 27" iMac desktop w 2Tb HD internal and 250 Gb flash drive, and Lion OSX and iMovie 11.

Thanks. I tested it out and you were correct. I loaded 2 .dv movies from my external HD back onto my internal HD, and got them re-imported into iMovie, took a few short clips from each of the 2 iMovie events and pasted them into a new project in the Project Browser. Then I deleted these 2 "source clips" from my internal HD, closed iMovie and then re-opened it and found that iMovie would NOT export the smaller clips for a "highlights" .4mv movie without the "source clips" being available.
I read your link on Quicktime. It talks about mostly trimming, which is what I did with each iMovie event before I took each one as a project to export as a smaller .4mv file. But if I use Quicktime (do I need QT Pro or basic), what advantage is it to me to use QT over iMovie (I must admit I am a novice at iMovie and have never used QT or QT Pro as a tool)? Will it then convert any edits I make to a .m4v movie or do I need iMovie to do that?
Does QT allow trimming multiple segments out of a movie during one edit session, or can you only do 1 at a time? By that I mean that, for example, when I use Sonys Picture Motion Browser for my .mts movies, you can only set one Start and one End point for each edit/trim you do: it does not allow you to set multiple Start Stop points like iMovie allows in its Event or Project browser. You can only do one "trim" at a time, save it and then reopen to do another trim. not very useful.

Deleting of PAT and ATT File

Similar Messages

Maybe you are looking for