Deleting OIM User completely
Hi all
I have tried deleting an OIM User.But I still see it when I search for the deleted User in a deleted mode(with status set to delete).
How do I delete the User completely from OIM ?
Thank you
Regards
The property which allows you to reuse OIM logins is XL.UserIDReuse. You can change it in the Design Console's System Configuration form.
You have to advice your client this is also not recommended at all. OIM won't be able to distinguish about newer and older "versions" of that login in Reports generations, neither in audit issues.
So if you run a report which shows logins or filters results by login, it will show you all records based on the provided login String value. This is common in historical reports, which shows resources from both deleted and active users.
A common scenario where you'll need this functionality is when a users leaves the company, and for any reason comes back to the organization a time after. If this is happens in your client's system, I would recommend not to delete users, but leave them deactivated, with all its resources revoked.
Hope it helps
Similar Messages
-
Can you delete a user in OIM?
How can I delete a user in OIM, such that it does not clutter my results lists with an entry marked deleted? I just want it to disappear completely!
thanksHere is how the user id can be reused, you will need to change the owner and tablespace names.
Execute the following steps in sqlplus
Step1: Drop the existing index
DROP INDEX XLAMD1.UDX_USR_LOGIN
Step2: create new Index
CREATE INDEX "XLADM1"."UDX_USR_LOGIN"
ON "XLADM1"."USR" ("USR_LOGIN")
TABLESPACE "XELTBS1" PCTFREE 10 INITRANS 2 MAXTRANS 255
STORAGE ( INITIAL 64K NEXT 0K MINEXTENTS 1 MAXEXTENTS
2147483645 PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1)
LOGGING
Step3:
COMMIT;
Step4:
Design Console-> System Configuration
Set "User Id reuse property" to true
-Kevin -
Delete oimGroup membership of the oim user using Script (oim 9.1).
Hi All,
I want to remove oim users' particular oim group membership, Is there any problem, if I use the following script to delete user group information from USg table?
delete from usg where usr_key in (select usr_key from usr where usr_login in ('xxx','yyy')) and ugp_key=31
Note: In our case, No policies,membershiprules are assigned to this oim group (we defined gruops only) and env is oim 9.1.
Can any one confirm this. Or if there is nay problem, please let us know.
Thanks.
Edited by: user13285646 on Jul 28, 2011 11:01 PMThanks Rajiv.
-
OIM Cannot uncomplete a completed task. OIM User Enable
Hey Guys,
I try to Enabled a Disabled user using the OIM user interface.
When doing it I have an error coming back:
DOBJ.SCHTM_INVALID_COMPLETED_CHANGE
Cannot uncomplete a completed task.
The logs shows:
ERROR,08 Mar 2011 13:28:45,806,[XELLERATE.ADAPTERS],Class/Method: tcAdpEvent/updateDataSetValuePost encounter some problems: Adapter Execution Error: updateDataObjFieldValuePost: error updating usr_disabled
ERROR,08 Mar 2011 13:28:45,807,[XELLERATE.ADAPTERS],Class/Method: tcAdpEvent/updateUserInfo encounter some problems: Adapter Execution Error: error updating Disabled
Any idea where this can come from ?Hi
If you will simply disable or enable user on OIM user profile, it won't give any error, if it is not attached with any resource object.
I think, provisioning process has been attached with this user and you are going to enable, and one of the resource object is already enabled or data inconsistent.
Will you provide user details for resource object and code? -
Create,update, delete of users in OIM through user reconciliation
Hi,
I want to perform create, update and delete of users in OIM using reconciliation of users through Oracle database.
I mean, I want to user Oracle database as trusted source of user information.
Can I perform these CRUD operations by creating GTC (generic technology connector) or is there any other means of doing it?
I need detail information/document on how I can perform user reconciliation?
Answer ASAP
Thanks & RegardsUser Management you have to use
http://www.oracle.com/technology/obe/fusion_middleware/im1014/oim/obe14_using_GTC_for_provisioning/integrating_oracle_identity_manager_and_oracle_database.htm
For your reference -
OIM 11gR2 : How to delete a User
Hello Experts,
I am trying to delete a User in OIM 11gR2. I search for the user and open the User Details page. Then i click on the Delete User hyperlink. But at the same time, a Delete Users page come up having a lable named Catalog and a search text field below it.
Kindly help me with this.there should be submit button on top right. just provide justification text and Effedctive Date field and click on submit
To delete a user:
1. In the Users section under Administration, search for and select the user you want to delete.
2. Delete the user in one of the following ways:
o Click Delete on the toolbar.
o From the Actions menu, select Delete.
o Click the user login of the user record that you want to delete. On the User Details page, click Delete User on the toolbar.
3. Verify that the selected user is displayed in the Target Users section.
4. If required, in the Target Users section, click the plus icon to search for more target users and add to the list of users that you want to delete. You can also view the user details by clicking the User Details link for each user.
5. In the Justification field, enter a justification for deleting the user.
6. In the Effective Date field, specify a date from which the user account must be removed.
7. Click Submit. A request to delete the user is created, which is subject to approval.
If action performed using xelsysadm(or System Administrator) it will lead to direct delete else subjected to approval -
How do I delete my old user completely?
It's more complicated than just deleting a user.
I've just upgraded my Mac to Yose mite and deleted my old User and created a new user.
I went to preferences and Users & Groups and I've checked it, i only see my new user as Admin.
Though when I shut down and turn my mac back on the first thing it opens is my old "deleted" user type in its password and wait a while for it to load then it goes to my new user and i have to log in with that to get to my Desktop Screen.
I've even tried this website (http://support.apple.com /kb/TS3981) and went to where to told me and find my old user but it's not there. I've even went into my User folder and my old user isn't there.
How do I delete my old User so when i turn on my mac and it goes straight to my new user and then i would type in the new users password etc and go into it skipping my old user?
Please help! Thanks.Open the Sharing pane of System Preferences and change the computer's name.
(23562) -
Selling my MAC, should I delete my user profile or completely reset?
Hello all,
selling my MacBook Pro to my friend. What's the best thing to do to "clean" my MacBook for him? Delete my user or "restore" mac?
I have "lion" installed so Im pretty sure it wont restore to that, probably the old operating system it had before I installed Lion.
Thoughts?
Michaelsteve359 wrote:
As has been explained to me, you cannot sell a pre-Lion-originally system with your-purchased Lion on it. You need to retore to the original OS disks and let the new user buy the upgrades. SL I think is transferrable as an OS-upgrade if the disks travel with it, but not Lion.
Thanks. I was kind of thinking it might be like that but wasn't sure since it really represents a reversal in how things used to operate. Of course somebody stands to a big advantage since now if, say a Mac makes its way through 3 owners, all 3 have to buy the Lion upgrade. Of course you also now cannot sell an unwanted OS anymore. And if Apple continues its pattern of no longer selling anything but the last 2 OS versions, all those Macs out there will useless a couple of years down the road since if somebody offered me Michael Drabousky1's Mac 3 years from now and I can no longer get Lion for it, I won't buy it. Goodie, goodie (for somebody), all those old Macs will soon be unusable and everybody will have to buy more new hardware! -
How To Properly Delete a User Profile on Windows 7 in a Domain environment
I have not been able to find an answer that matches the issue I'm facing. I had recently setup a laptop for a user and soon after, he was experiencing issues that I thought might be profile related. So, I did what always worked for me on prior versions of
Windows without any fuss or side affects.
Logged in under the local Administrator account, I went into: System Properties>User Profiles>Settings and removed the user profile from their. When I do that, I get an error message:
Profile Error
Profile not deleted completely. Error - A required privilege is not held by the client
Ok, no problem I think. I just need to delete the user's profile directory under the users folder right? So I do this and figure when I try to log in again as the user that a new profile will be created. However, this is not what happens exactly. I login
with the user credentials and it logs in successfully. However, I get a pop saying:
You have been logged on with a temporary profile
You cannot access your files and files created in this profile will be deleted when you log off. To fix this, log off and try logging on later.
Please see the event log for details or contact your system administrator
So my question is; why did the profile not delete completely after both deleting the user profile under System Properties and after deleting the actual profile directory? What did I miss and what is the proper method of deleting a user profile completely
without running into these other issues?Hi Womprat,
According to your description, I understand that you want to delete user profile but display an error in Windows 7.
Please use other user (with administrator privileges) login this computer, then open Properties for Computer--->Advanced system setting--->Settings for User Profiles, then select the profile you want to delete.
More details about Delete a user account, please refer to:
http://windows.microsoft.com/en-us/windows7/delete-a-user-account
Additional, please contact Windows 7 IT Pro Team so that you can get more professional suggestions. For your convenience:
https://social.technet.microsoft.com/Forums/en-US/home?category=w7itpro&filter=alltypes&sort=lastpostdesc
Best regards,
Allen Wang -
Selling an Imac to a family member and want to delete the user
So I'm selling my 2008 iMac to my mom because I just bought a new macbook pro. I've transferred everything to my new computer and now want to delete my user account on my old one (which is the only user on the computer). I want my mom to be able to make her own account so she can customize it like any mac user should be able to do, but I don't want her to lose some of the apps and stuff that I have.
If I delete the account will It lose some of that data? I also want to take the mac off of my apple ID so that Its not taking up one of my 5 devices (I think that's how many they allow haha). I am still curious about how to do this because I want to do it correctly.
Thanks in advance for the helpWhat to do before selling or giving away your Mac
Erase the drive and install Snow Leopard from scratch:
Clean Install of Snow Leopard
1. Boot the computer using the Snow Leopard Installer Disc or the Disc 1 that came
with your computer. Insert the disc into the optical drive and restart the computer.
After the chime press and hold down the "C" key. Release the key when you see
a small spinning gear appear below the dark gray Apple logo.
2. After the installer loads select your language and click on the Continue
button. When the menu bar appears select Disk Utility from the Utilities menu.
After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
size.) Click on the Partition tab in the DU main window. Set the number of
partitions to one (1) from the Partitions drop down menu, click on Options button
and select GUID, click on OK, then set the format type to MacOS Extended
(Journaled, if supported), then click on the Apply button.
3. When the formatting has completed quit DU and return to the installer. Proceed
with the OS X installation and follow the directions included with the installer.
4. When the installation has completed your computer will Restart into the Setup
Assistant. Be sure you configure your initial admin account with the exact same
username and password that you used on your old drive. After you finish Setup
Assistant will complete the installation after which you will be running a fresh
install of OS X. You can now begin the update process by opening Software
Update and installing all recommended updates to bring your installation current.
Download and install Mac OS X 10.6.8 Update Combo v1.1. -
Problems while provisioning OIM user to AD
Hello,
My OIM version is 9.1.0.1 & AD version is 9.1.1.4
I want to provision OIM user to AD,so before provisioning i ran AD Group Lookup Recon &
AD Organization Lookup Recon .
When i tried to provision AD User to OIM user ,status=provisioning where System Validation was
completed & create user was rejected & there was no response description.
Following is the error which i got on console : java.lang.reflect.InvocationTargetException
Thanks & Regards
Rahul ShahIT Resource Parameters :
ADAM LockoutThreshold Value 5
ADGroup LookUp Definition Lookup.ADReconciliation.GroupLookup
Admin FQDN CN=Administrator,CN=Users,DC=proservdemo,DC=com
Admin Password *******
Allow Password Provisioning yes
AtMap ADGroup AtMap.ADGroup
AtMap ADUser AtMap.AD
Invert Display Name no
Port Number 389
Remote Manager Prov Lookup AtMap.AD.RemoteScriptlookUp
Remote Manager Prov Script Path
Root Context DC=proservdemo,DC=com
Server Address IP Address
Target Locale: TimeZone GMT
UPN Domain proservdemo.com
Use SSL no
isADAM no
isUserDeleteLeafNode no
& here is the exception which i see on console :
Running GETINVERTDISPLAYNAMEVALUE
Target Class = java.lang.String
Running CONCATFIRSTANDLAST
Target Class = com.thortech.xl.util.adapters.tcUtilStringOperations
Running GETINVERTDISPLAYNAMEVALUE
Target Class = java.lang.String
Running CONCATFIRSTANDLAST
Target Class = com.thortech.xl.util.adapters.tcUtilStringOperations
Running CONCATDOMAIN
Target Class = com.thortech.xl.util.adapters.tcUtilStringOperations
Running CONCATUSERLOGINWITHDOMAIN
Target Class = com.thortech.xl.util.adapters.tcUtilStringOperations
MessageDateFieldBean, localName='messageDateField': oracle.cabo.image: Initializ
ing image cache: D:\Oracle\OIM\xellerate\OIMApplications\WLXellerateFull.ear\xlW
ebApp.war\cabo\images\cache\ ...
MessageDateFieldBean, localName='messageDateField': oracle.cabo.image: Loading i
mage 0 of 3 from image cache: D:\Oracle\OIM\xellerate\OIMApplications\WLXellerat
eFull.ear\xlWebApp.war\cabo\images\cache\
MessageDateFieldBean, localName='messageDateField': oracle.cabo.image: Finished
initializing image cache: D:\Oracle\OIM\xellerate\OIMApplications\WLXellerateFul
l.ear\xlWebApp.war\cabo\images\cache\
Running ISADAM
Target Class = java.lang.String
Running Get Attribute Map
Running AD Create User
java.lang.reflect.InvocationTargetException
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.thortech.xl.adapterGlue.ScheduleItemEvents.adpADCSCREATEUSER.ADCREATEUSER(adpADCSCREATEUSER.java:224)
at com.thortech.xl.adapterGlue.ScheduleItemEvents.adpADCSCREATEUSER.implementation(adpADCSCREATEUSER.java:91)
at com.thortech.xl.client.events.tcBaseEvent.run(Unknown Source)
at com.thortech.xl.dataobj.tcDataObj.runEvent(Unknown Source)
at com.thortech.xl.dataobj.tcScheduleItem.runMilestoneEvent(Unknown Source)
at com.thortech.xl.dataobj.tcScheduleItem.eventPostInsert(Unknown Source)
at com.thortech.xl.dataobj.tcDataObj.insert(Unknown Source)
at com.thortech.xl.dataobj.tcDataObj.save(Unknown Source)
at com.thortech.xl.dataobj.tcORC.insertNonConditionalMilestones(UnknownSource)
at com.thortech.xl.dataobj.tcORC.completeSystemValidationMilestone(Unknown Source)
at com.thortech.xl.dataobj.tcOrderItemInfo.completeCarrierBaseMilestone(Unknown Source)
at com.thortech.xl.dataobj.tcOrderItemInfo.eventPostInsert(Unknown Source)
at com.thortech.xl.dataobj.tcUDProcess.eventPostInsert(Unknown Source)
at com.thortech.xl.dataobj.tcDataObj.insert(Unknown Source)
at com.thortech.xl.dataobj.tcDataObj.save(Unknown Source)
at com.thortech.xl.dataobj.tcTableDataObj.save(Unknown Source)
at com.thortech.xl.ejb.beansimpl.tcFormInstanceOperationsBean.setProcessFormData(Unknown Source)
at com.thortech.xl.ejb.beansimpl.tcFormInstanceOperationsBean.setProcessFormData(Unknown Source)
at com.thortech.xl.ejb.beans.tcFormInstanceOperationsSession.setProcessFormData(Unknown Source)
at com.thortech.xl.ejb.beans.tcFormInstanceOperations_2j82mm_EOImpl.setProcessFormData(tcFormInstanceOperations_2j82mm_EOImpl.java:1245)
at Thor.API.Operations.tcFormInstanceOperationsClient.setProcessFormData(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at Thor.API.Base.SecurityInvocationHandler$1.run(Unknown Source)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
at weblogic.security.Security.runAs(Security.java:41)
at Thor.API.Security.LoginHandler.weblogicLoginSession.runAs(Unknown Source)
at Thor.API.Base.SecurityInvocationHandler.invoke(Unknown Source)
at $Proxy68.setProcessFormData(Unknown Source)
at com.thortech.xl.webclient.actions.DirectProvisionUserAction.handleVerifyProcessData(Unknown Source)
at com.thortech.xl.webclient.actions.DirectProvisionUserAction.goNext(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.apache.struts.actions.DispatchAction.dispatchMethod(DispatchAction.java:280)
at com.thortech.xl.webclient.actions.tcLookupDispatchAction.execute(Unknown Source)
at com.thortech.xl.webclient.actions.tcActionBase.execute(Unknown Source)
at com.thortech.xl.webclient.actions.tcAction.execute(Unknown Source)
at org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:484)
at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:274)
at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1482)
at org.apache.struts.action.ActionServlet.doPost(ActionServlet.java:525)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at com.thortech.xl.webclient.security.SecurityFilter.doFilter(Unknown Source)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.doIt(WebAppServletContext.java:3684)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3650)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2268)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2174)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1446)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Caused by: java.lang.NullPointerException
at com.thortech.xl.integration.ActiveDirectory.tcUtilADTasks.createUser(Unknown Source)
... 68 more
com.thortech.xl.dataobj.util.tcAdapterTaskException
at com.thortech.xl.adapterGlue.ScheduleItemEvents.adpADCSCREATEUSER.ADCREATEUSER(adpADCSCREATEUSER.java:230)
at com.thortech.xl.adapterGlue.ScheduleItemEvents.adpADCSCREATEUSER.implementation(adpADCSCREATEUSER.java:91)
at com.thortech.xl.client.events.tcBaseEvent.run(Unknown Source)
at com.thortech.xl.dataobj.tcDataObj.runEvent(Unknown Source)
at com.thortech.xl.dataobj.tcScheduleItem.runMilestoneEvent(Unknown Source)
at com.thortech.xl.dataobj.tcScheduleItem.eventPostInsert(Unknown Source)
at com.thortech.xl.dataobj.tcDataObj.insert(Unknown Source)
at com.thortech.xl.dataobj.tcDataObj.save(Unknown Source)
at com.thortech.xl.dataobj.tcORC.insertNonConditionalMilestones(UnknownSource)
at com.thortech.xl.dataobj.tcORC.completeSystemValidationMilestone(Unknown Source)
at com.thortech.xl.dataobj.tcOrderItemInfo.completeCarrierBaseMilestone(Unknown Source)
at com.thortech.xl.dataobj.tcOrderItemInfo.eventPostInsert(Unknown Source)
at com.thortech.xl.dataobj.tcUDProcess.eventPostInsert(Unknown Source)
at com.thortech.xl.dataobj.tcDataObj.insert(Unknown Source)
at com.thortech.xl.dataobj.tcDataObj.save(Unknown Source)
at com.thortech.xl.dataobj.tcTableDataObj.save(Unknown Source)
at com.thortech.xl.ejb.beansimpl.tcFormInstanceOperationsBean.setProcessFormData(Unknown Source)
at com.thortech.xl.ejb.beansimpl.tcFormInstanceOperationsBean.setProcessFormData(Unknown Source)
at com.thortech.xl.ejb.beans.tcFormInstanceOperationsSession.setProcessFormData(Unknown Source)
at com.thortech.xl.ejb.beans.tcFormInstanceOperations_2j82mm_EOImpl.setProcessFormData(tcFormInstanceOperations_2j82mm_EOImpl.java:1245)
at Thor.API.Operations.tcFormInstanceOperationsClient.setProcessFormData(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at Thor.API.Base.SecurityInvocationHandler$1.run(Unknown Source)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
at weblogic.security.Security.runAs(Security.java:41)
at Thor.API.Security.LoginHandler.weblogicLoginSession.runAs(Unknown Source)
at Thor.API.Base.SecurityInvocationHandler.invoke(Unknown Source)
at $Proxy68.setProcessFormData(Unknown Source)
at com.thortech.xl.webclient.actions.DirectProvisionUserAction.handleVerifyProcessData(Unknown Source)
at com.thortech.xl.webclient.actions.DirectProvisionUserAction.goNext(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.apache.struts.actions.DispatchAction.dispatchMethod(DispatchAction.java:280)
at com.thortech.xl.webclient.actions.tcLookupDispatchAction.execute(Unknown Source)
at com.thortech.xl.webclient.actions.tcActionBase.execute(Unknown Source)
at com.thortech.xl.webclient.actions.tcAction.execute(Unknown Source)
at org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:484)
at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:274)
at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1482)
at org.apache.struts.action.ActionServlet.doPost(ActionServlet.java:525)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at com.thortech.xl.webclient.security.SecurityFilter.doFilter(Unknown Source)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.doIt(WebAppServletContext.java:3684)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3650)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2268)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2174)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1446)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
& is AD version 9.1.1.4 compatible with OIM 9.1.0.1
Thanks & regards
Rahul Shah -
How to do Archiving of deleted & disabled users in OIM11g
Hi All,
As per the requirement we have to do archive of deleted & disabled users in OIM11g(11.1.1.2) after 75days. Can i know how can i achieve this?
Regards,
user7609Just to recap:
Your client requirement is to archive users out of OIM after 75 days. This means in addition to actually disabling and/or deleting them, fully removing any traces of them from the system.
As Kevin & GP said, OIM is just not built to do this. API alone is not going to accomplish this task... you'll also need to include SQL to actually drop data out of tables.
All that being said, your post said the reason for this was because of a "license for limited users". Oracle Identity Manager is licensed on an active user basis. You really should talk with your Oracle rep to confirm, but I've never had licensing contracts include deleted/disabled users. -
How do i delete a user from my macbook pro?
How do I delete a user from my macbook pro?
If you've admin privileges and there are no files in the user account that you want to keep, just go to System Preferences>Users & Groups and unlock it with your admin password. Select the user that you want to delete and click on the minus button. You'll get a warning before you completely delete the user but once it's gone, it's gone.
Clinton -
Hello,
I haved a problem with a user account in my Imap Server, a old message stopped my incoming emails with the message: No longer exist, I O erreur or sometime like that. I dont know how erase a specific message of a user so I make a copy of this folders user Inbox, Sent , etc, and I try to delete this user and make a new user with the same login.
The problem is if I check the Email settings in my server the user is still there, so I dont know how delete the user for complete, specially from the mail server.
I erase his account in user manager, but is not deleted from the mail server.
I need help, Im a new user of MAC OS Server. TXSI'm experiencing the same issue, can't delete the user. But I've read all the articles and cyradm won't let me delete the user. I've added my short username (chrisr) to the imapd.conf file. And here's what I'm doing:
% su chrisr ./cyradm
Password:
cyradm> connect localhost
Password:
localhost> lm
Deleted Messages (\HasNoChildren) Sent Messages (\HasNoChildren)
INBOX (\Noinferiors)
localhost> sam user/bradtrainer chrisr all
setaclmailbox: chrisr: lrswipcda: Mailbox does not exist
localhost> sam /Volumes/Data\ Storage/email-store/mail/user/bradtrainer chrisr all
setaclmailbox: chrisr: lrswipcda: Mailbox does not exist
localhost> sam /Volumes/Data\ Storage/email-store/mail/user/bradtrainer admin all
setaclmailbox: admin: lrswipcda: Mailbox does not exist
localhost> dm user/bradtrainer
deletemailbox: Mailbox does not exist
localhost> dm /Volumes/Lavender\ Data/email-store/mail/user/bradtrainer
deletemailbox: Mailbox does not exist
Yet as you can clearly see, he does exist, both in the directory listing and in the Server Admin list:
# cd /Volumes/Data\ Storage/email-store/mail/user/
# ls -la
total 0
drwx------ 25 cyrusima mail 850 Apr 3 22:44 .
drwxr-xr-x 4 cyrusima mail 136 Feb 16 14:03 ..
drwx------ 199 cyrusima mail 6766 Mar 20 16:48 anthonygreenwood
drwx------ 19 cyrusima mail 646 Apr 3 23:28 austinlindstrom
drwx------ 61 cyrusima mail 2074 Apr 3 23:56 barry
drwx------ 10 cyrusima mail 340 Apr 3 23:30 bradtrainer
drwx------ 86 cyrusima mail 2924 Apr 3 23:56 carisasibbet
drwx------ 476 cyrusima mail 16184 Apr 4 00:15 carlsandberg
drwx------ 327 cyrusima mail 11118 Apr 4 00:16 carolyn
drwx------ 445 cyrusima mail 15130 Apr 4 00:01 chrisr
drwx------ 51 cyrusima mail 1734 Apr 4 00:13 ethanboatner
drwx------ 227 cyrusima mail 7718 Apr 3 23:28 guy
drwx------ 32 cyrusima mail 1088 Apr 3 23:28 holdgrafer
drwx------ 131 cyrusima mail 4454 Apr 4 00:06 hubertbonnet
drwx------ 36 cyrusima mail 1224 Apr 3 19:57 jeffhellenbrand
drwx------ 74 cyrusima mail 2516 Apr 3 23:26 jimpounds
drwx------ 23 cyrusima mail 782 Apr 3 21:36 lindaraines
drwx------ 49 cyrusima mail 1666 Apr 4 00:13 michael
drwx------ 76 cyrusima mail 2584 Apr 3 23:41 michaelhnida
drwx------ 46 cyrusima mail 1564 Apr 3 23:00 michaelrand
drwx------ 43 cyrusima mail 1462 Apr 4 00:15 pierre
drwx------ 7 cyrusima mail 238 Mar 4 12:24 rachelhass
drwx------ 50 cyrusima mail 1700 Apr 4 00:14 rocheford
drwx------ 1022 cyrusima mail 34748 Apr 3 23:14 scottleo
drwx------ 237 cyrusima mail 8058 Apr 3 23:28 suzanne
15 PowerBook G4 Aluminum 1.5 Ghz -
Deleted a user but did not save any space
I used migration assistant some time ago and accidentally created a second user in the process. It took me several months to transfer all my files from the secondary user to the admin user (approximately 175 gigs worth) and I finally finished today.
I then deleted the secondary user (picked the bottom option), but did not see any decrease in size even though I selected the option to delete the users files.
I hunted around and found an old user profile but when I selected info on the file, I noticed that it was very small.
I am not sure where these files are hidden, but I definitely want to delete them permanently.
Any suggestions on how to clear this up would be greatly appreciated.When you delete a user account you have four options. The last one is to remove it completely. The other three allow you to retain it or archive it. The last option is not the default. So the account is still in your /Users/ folder, probably in a folder named Deleted Users. Drag to the Trash then empty.
Maybe you are looking for
-
Hi, I need to do Warranty Process for Vendor(Transaction wise). 1.When I am raising a Purchase Order to Vendor for the material which is in the Warranty Period, the system should allow to raise PO without Price(Free Item is disabled) 2.In case of ser
-
How can some CD's import Ok and some import and have no sound?
I have been importing songs from CD's - some import correctly and play perfectly. Some CD's import, but they are only a few Kbs and there is no sound when they play back. Does anybody know why this is happening? It's driving me up the wall! Help! W
-
BEx Query- Making into Zero value in the blank row/column
Hi All, I am running a query on multiprovider, say I have three characteristics (sales org, distribution, customer) & key figure (amount) in the layout. I am lookling the actual & plan data in the report. If there is no plan data for the above combi
-
Handling BDC with inbound IDOC processing
Hi All, In the function module for inbound processing, I have a BDC to be executed. But when the IDOC is received from the WEBSPHERE(Middleware) the BDC fails. There is an exception, "CNTL_ERROR" raised by the class "CL_GUI_CUSTOM_CONTAINER=======CP
-
In the event that I have some catastrophic problem and Apple decides to swap phones, I'm assuming I'd have to pony up $100 to get an 8G phone since a 4G would most likely not be available. Does anyone know the official Apple policy? Would they be les