Deleting old indexes in OSES

Hi,
Has anybody deleted old indexes from EQ_TEST schema. If so, which are the tables that can be safely truncated.
We are trying out different options in our development environments and even though we have deleted Sources from the OSES admin console, the data in EQ$CACHE, EQ$URL etc. remain and this is occupying tablespace. For example, the eq$attr_val in our development instance now hold - 22704948 rows.
Is there any admin command or procedure that can be run to safely delete bad data from these tables.
We are using - 10.1.8.4.0
Thanks
Prat

Well,
We trunctated/deleted the following tables -
EQ$ATTR_VAL
EQ$URL
EQ$DOC
EQ$CACHE
EQ$SEC_ATTR_VAL
We restarted OSES and are now reindexing data. We use OSES in conjunction with Siebel.
So far the crawling seems to be fine. Fresh data is being inserted into the above tables.
Prat

Similar Messages

  • How can I delete an old index ?

    I'm revising a book and I need to completely remove the old index a create a new one. Have not found an answer on the internet or my InDesign book. Any suggestions  would be most welcome!

    Dear Peter
    thanks so much for the info. I was able to delete the markers but this did not seem to clear the index topics or delete the index. Not sure what you mean by the "index story". For now I have created a new document with no index with new masters and am copying each page over. As I'm revising the book this isn't too bad.
    Best
    Gregg

  • How to delete old logs in SAP BI, what is the best way to go?

    Hi,
    below are the issues we are facing,
    when executing infopackage job is not getting triggred into source system.
    for activation DSO data it is taking huge time. At the time of seqential read to RSREQDONE table.
    I think this is due to huge logs in the staandard tables.
    What could be the reson behind this.. and let me know how to delete old logs.
    Thanks,
    Harish

    Hi,
    just carry out RSRV for DSO PSA tables and see if there is inconsistency available there in the PSA table.
    see if the change log and PSA deletion is happening regularly..else schedule same in PC
    check with basis there are certain jobs which needs to run regularly at certain frequency..
    http://www.erphowtos.com/guides-a-tutorials/doc_view/1041-how-to-delete-process-chain-logs-in-sap-bw.html
    http://www.erphowtos.com/guides-a-tutorials/doc_view/1040-periodic-maintenance-activities-on-sap-bw-best-practices.html
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a02ba9e7-bb6f-2c10-09b4-e86b9fcbad41?QuickLink=index&overridelayout=true
    Thanks and regards
    Kiran

  • How can I delete topic index keywords that are no longer associated with a topic?

    I am trying to clean up the index of an older Robohelp project before it becomes part of a merged webhelp project. I do not want to include any of its index keywords or topic keywords. I've managed to remove most of them, but I have a group of troublesome entries that refuse to go away. In fact, they cause RH8 to crash. I am running Windows XP.
    Looking at the code in Visual Studio, it appears that an instruction is pointing to field which contains "zero".  (see image below) 
    I have tried creating a new index and deleting the old index, but RH just keeps adding these topic keywords (in bold typeface) to the new index. If the keywords are no longer associated with a topic, where is RH storing these disassociated keywords? If I open the .hhk, it is empty.

    Not sure why RH crashed when deleting a portion of the topic keywords manuall
    y from the index pane, but I was finally able to remove them with the Remove Unused Keywords tool. Duh! Thanks anyway!

  • Working with the old index webpage in new server system

    I'm a newbie to OS X Server and having some trouble getting up to speed.  Also, this is an odd issue, so please bear with me.
    I have a very old app on my iphone which would access some specific files I would store in the old OS X Sites folder, and access thru the default Index.html page.
    I would edit Index.html, with specific links, and the app would be able to access and download the files.  This would be when the iphone was LAN connected, not over the normal web.
    When I activated OS X Server, this old Apache webpage access went away.  So now I am trying to figure out how to have the app see my "new" website.
    In the pass, I would type in the OS X webpage address, http://192.168.XX.XX/~USERNAME/, into the app.  It would open the page in safari.  I would then click on the link I created within the page to access and download the file.  The link was as follows: appname://192.168.xx.xx/~username/filename.  The app would reopen, and download the file.
    I added an additional domain in server of just the computer ip, 192.168.xx.xx.  I also changed the Store Site Files In: to the old Sites folder, under my user name.  Now the old app is seeing and reading the index.html, but when I click on the link the app gives me a "cannot connect to server" error.
    I know what I'm describing may be unclear, convoluted, odd, but what I'm looking for are some descriptions on how the access of the website changed from the old os to the new server, as a means of figuring out how to adjust the link lines to allow the app to access.  Also comments on how iphones and their apps no longer connect to the computer in the way they would and new steps I need to take to allow it.
    The one thing I see is that the link didn't list the Sites folder under the username filder, meaning that the computer or Apache automatically looked for the webpage files in this folder.  Now I don't know what it's doing, where it's looking.
    Any comments greatly appreciated.

    If you right click on your new index there is an option to make that the default. Then the delete option should be available on the old index.
      The RoboColum(n)
      @robocolumn
      Colum McAndrew

  • Delete old records in oracle database using jobs

    Hi,
    will it be possible to delete old records in oracle database using jobs
    need to delete old records on weekly basis and rebuild my index.
    Thanks!

    933633, While it is possible to do a great deal with the dbms_scheduler your shop should have a scheduler like CA Unicenter that is used to run the application job schedules. Purge jobs should probably be part of the normal application schedule rather than contained in the database, if your shop has a scheduler in use.
    As far as rebuilding the indexes after the purge keep in mind that freshly rebuilt indexes often have to split when inserts are performed due to the fact the compacted index blocks do not have room to hold the newly inserted keys in the appropriate locations. So just because you purge weekly does not automatically mean the indexes should be rebuilt weekly. You need to look at the index key DML pattern and at the total percentage of the index that is held by deleted rows.
    HTH -- Mark D Powell --

  • Since Mavericks upgrade, Time Capsule stuck deleting old backups ... for days

    I have a previous generation 2TB Time Capsule shared by three of us, each with separate accounts.
    I know there's not much space left on the Time Capsule and that it's therefore expected that Time Machine would make room by deleting old backups. But my account seems stuck forever on these deletions (for over 72 hours now), while the other two accounts on the Time Capsule are working just fine.
    I've been through Pondini's recommendations for (a) patience and (b) finally resetting Time Machine, but on it goes.
    Here is the last couple of hours of the log (filtered for this problem).  The entire log for the last 72 hours is too long to post -- but the pattern is the same, with the constant deletions barely making a dent, and sometimes in fact the space available decreases.
    I'd cheerfully give up on the oldest backups, but meanwhile it's been 8 days since TC has been able to complete a backup.  (I have been cloning the drive daily with SuperDuper just to make sure I have a fallback until this is figured out.)
    Hoping one of you can recommend a course of action.
    Thanks in advance for any help...
    10/28/13 8:06:51.276 PM com.apple.backupd[758]: Found 1022200 files (58.34 GB) needing backup
    10/28/13 8:07:01.173 PM com.apple.backupd[758]: 75.13 GB required (including padding), 16.43 GB available
    10/28/13 8:07:05.162 PM com.apple.backupd[758]: Ejected Time Machine disk image: /Volumes/edbern/EB’s MacBook Air.sparsebundle
    10/28/13 8:07:05.162 PM com.apple.backupd[758]: Compacting backup disk image to recover free space
    10/28/13 8:25:44.384 PM com.apple.backupd[758]: Completed backup disk image compaction
    10/28/13 8:25:44.388 PM com.apple.backupd[758]: Starting manual backup
    10/28/13 8:25:44.915 PM com.apple.backupd[758]: Network destination already mounted at: /Volumes/edbern
    10/28/13 8:26:04.847 PM com.apple.backupd[758]: Disk image /Volumes/edbern/EB’s MacBook Air.sparsebundle mounted at: /Volumes/Time Machine Backups 1
    10/28/13 8:26:05.230 PM com.apple.backupd[758]: Backing up to /dev/disk3s2: /Volumes/Time Machine Backups 1/Backups.backupdb
    10/28/13 8:26:31.228 PM com.apple.backupd[758]: Event store UUIDs don't match for volume: Macintosh HD
    10/28/13 8:26:31.546 PM com.apple.backupd[758]: Waiting for index to be ready (100)
    10/28/13 8:27:25.289 PM com.apple.backupd-helper[112]: Not starting scheduled Time Machine backup: Backup already running
    10/28/13 8:27:31.784 PM com.apple.backupd[758]: Waiting for index to be ready (100)
    10/28/13 8:27:56.892 PM com.apple.backupd[758]: Deep event scan at path:/ reason:must scan subdirs|new event db|
    10/28/13 8:35:43.224 PM com.apple.backupd[758]: Finished scan
    10/28/13 8:35:43.241 PM com.apple.backupd[758]: Not using file event preflight for Macintosh HD
    10/28/13 9:05:03.078 PM com.apple.backupd[758]: Found 1022200 files (58.34 GB) needing backup
    10/28/13 9:05:16.881 PM com.apple.backupd[758]: 75.13 GB required (including padding), 31.85 GB available
    10/28/13 9:05:17.689 PM com.apple.backupd[758]: Deleted backup /Volumes/Time Machine Backups 1/Backups.backupdb/EB’s MacBook Air/2013-10-28-202628.inProgress/03624AE5-22CE-463C-9265-CE6A8826C535 containing 4 KB; 31.85 GB now available, 75.13 GB required
    10/28/13 9:05:17.700 PM com.apple.backupd[758]: Deleted backup /Volumes/Time Machine Backups 1/Backups.backupdb/EB’s MacBook Air/2013-10-28-202628.inProgress/7503F996-8E27-4558-9308-15FC60270865 containing 4 KB; 31.85 GB now available, 75.13 GB required
    10/28/13 9:23:23.471 PM com.apple.backupd[758]: Deleted backup /Volumes/Time Machine Backups 1/Backups.backupdb/EB’s MacBook Air/2013-10-28-202628.inProgress/C424E6F6-EFBE-4154-A543-375E805E68C8 containing 8.3 MB; 31.86 GB now available, 75.13 GB required
    10/28/13 9:28:36.239 PM com.apple.backupd-helper[112]: Not starting scheduled Time Machine backup: Backup already running
    10/28/13 9:55:03.037 PM com.apple.backupd[758]: Error: Error Domain=NSOSStatusErrorDomain Code=-36 "The operation couldn’t be completed. (OSStatus error -36.)" (ioErr: I/O error (bummers)) deleting backup: /Volumes/Time Machine Backups 1/Backups.backupdb/EB’s MacBook Air/2013-10-28-202628.inProgress/C434BAEA-946E-4531-BA61-74DD5A34EFF2
    10/28/13 9:55:03.037 PM com.apple.backupd[758]: Deleted 3 backups containing 8.3 MB total; 31.86 GB now available, 75.13 GB required
    10/28/13 9:55:03.321 PM com.apple.backupd[758]: Error writing to backup log.  NSFileHandleOperationException:*** -[NSConcreteFileHandle writeData:]: Not a directory
    10/28/13 9:55:03.579 PM com.apple.backupd[758]: Error writing to backup log.  NSFileHandleOperationException:*** -[NSConcreteFileHandle writeData:]: Not a directory
    10/28/13 9:55:03.580 PM com.apple.backupd[758]: Error writing to backup log.  NSFileHandleOperationException:*** -[NSConcreteFileHandle writeData:]: Not a directory
    10/28/13 9:55:03.582 PM com.apple.backupd[758]: Error writing to backup log.  NSFileHandleOperationException:*** -[NSConcreteFileHandle writeData:]: Not a directory
    10/28/13 9:55:03.702 PM com.apple.backupd[758]: Backup canceled.
    10/28/13 9:55:11.830 PM com.apple.backupd[758]: [SnapshotUtilities mountPointForVolumeRef] FSGetVolumeInfo returned: -35
    10/28/13 9:55:11.831 PM com.apple.backupd[758]: Failed to eject volume (null) (FSVolumeRefNum: -110; status: -35; dissenting pid: 0)
    10/28/13 9:55:11.832 PM com.apple.backupd[758]: Failed to eject Time Machine disk image: /Volumes/edbern/EB’s MacBook Air.sparsebundle

    Alas, it spent the night fruitlessly.   I think I need to find a way to kill the existing backup or dismount the disk first.  Sorry I'm a bit thick about all this.
    10/29/13 12:39:06.822 AM com.apple.backupd[1628]: Starting automatic backup
    10/29/13 12:39:07.028 AM com.apple.backupd[1628]: Attempting to mount network destination URL: afp://edbern;AUTH=SRP@TC._afpovertcp._tcp.local/edbern
    10/29/13 12:39:07.995 AM com.apple.backupd[1628]: Mounted network destination at mount point: /Volumes/edbern-1 using URL: afp://edbern;AUTH=SRP@TC._afpovertcp._tcp.local/edbern
    10/29/13 12:39:11.397 AM com.apple.backupd[1628]: Disk image already attached: /Volumes/edbern-1/EB’s MacBook Air.sparsebundle, DIHLDiskImageAttach returned: 35
    10/29/13 12:39:12.969 AM com.apple.backupd[1628]: Failed to mount disk image: Error Domain=com.apple.backupd.ErrorDomain Code=31 "The operation couldn’t be completed. (com.apple.backupd.ErrorDomain error 31.)" UserInfo=0x7ffdc243f1c0 {MessageParameters=(
        "/Volumes/edbern-1/EB\U2019s MacBook Air.sparsebundle"
    10/29/13 12:39:13.059 AM com.apple.backupd[1628]: Ejected Time Machine network volume.
    10/29/13 12:39:13.060 AM com.apple.backupd[1628]: Waiting 60 seconds and trying again.
    10/29/13 12:40:24.403 AM com.apple.backupd[1628]: Attempting to mount network destination URL: afp://edbern;AUTH=SRP@TC._afpovertcp._tcp.local/edbern
    10/29/13 12:40:24.792 AM com.apple.backupd[1628]: Mounted network destination at mount point: /Volumes/edbern-1 using URL: afp://edbern;AUTH=SRP@TC._afpovertcp._tcp.local/edbern
    10/29/13 12:40:27.642 AM com.apple.backupd[1628]: Disk image already attached: /Volumes/edbern-1/EB’s MacBook Air.sparsebundle, DIHLDiskImageAttach returned: 35
    10/29/13 12:40:29.209 AM com.apple.backupd[1628]: Failed to mount disk image: Error Domain=com.apple.backupd.ErrorDomain Code=31 "The operation couldn’t be completed. (com.apple.backupd.ErrorDomain error 31.)" UserInfo=0x7ffdc27275c0 {MessageParameters=(
        "/Volumes/edbern-1/EB\U2019s MacBook Air.sparsebundle"
    10/29/13 12:40:29.324 AM com.apple.backupd[1628]: Ejected Time Machine network volume.
    10/29/13 12:40:29.325 AM com.apple.backupd[1628]: Waiting 60 seconds and trying again.
    10/29/13 12:41:40.533 AM com.apple.backupd[1628]: Attempting to mount network destination URL: afp://edbern;AUTH=SRP@TC._afpovertcp._tcp.local/edbern
    10/29/13 12:41:41.252 AM com.apple.backupd[1628]: Mounted network destination at mount point: /Volumes/edbern-1 using URL: afp://edbern;AUTH=SRP@TC._afpovertcp._tcp.local/edbern
    10/29/13 12:41:44.549 AM com.apple.backupd[1628]: Disk image already attached: /Volumes/edbern-1/EB’s MacBook Air.sparsebundle, DIHLDiskImageAttach returned: 35
    10/29/13 12:41:46.208 AM com.apple.backupd[1628]: Failed to mount disk image: Error Domain=com.apple.backupd.ErrorDomain Code=31 "The operation couldn’t be completed. (com.apple.backupd.ErrorDomain error 31.)" UserInfo=0x7ffdc26090d0 {MessageParameters=(
        "/Volumes/edbern-1/EB\U2019s MacBook Air.sparsebundle"
    10/29/13 12:41:46.309 AM com.apple.backupd[1628]: Ejected Time Machine network volume.
    10/29/13 12:41:46.310 AM com.apple.backupd[1628]: Giving up after 3 retries.
    10/29/13 12:41:46.350 AM com.apple.backupd[1628]: Backup failed with error 31: 31
    10/29/13 1:44:01.616 AM com.apple.backupd[1768]: Starting automatic backup
    10/29/13 1:44:01.649 AM com.apple.backupd[1768]: Attempting to mount network destination URL: afp://edbern;AUTH=SRP@TC._afpovertcp._tcp.local/edbern
    10/29/13 1:44:02.604 AM com.apple.backupd[1768]: Mounted network destination at mount point: /Volumes/edbern-1 using URL: afp://edbern;AUTH=SRP@TC._afpovertcp._tcp.local/edbern
    10/29/13 1:44:07.254 AM com.apple.backupd[1768]: Disk image already attached: /Volumes/edbern-1/EB’s MacBook Air.sparsebundle, DIHLDiskImageAttach returned: 35
    10/29/13 1:44:08.881 AM com.apple.backupd[1768]: Failed to mount disk image: Error Domain=com.apple.backupd.ErrorDomain Code=31 "The operation couldn’t be completed. (com.apple.backupd.ErrorDomain error 31.)" UserInfo=0x7f9af9531a70 {MessageParameters=(
        "/Volumes/edbern-1/EB\U2019s MacBook Air.sparsebundle"
    10/29/13 1:44:08.962 AM com.apple.backupd[1768]: Ejected Time Machine network volume.
    10/29/13 1:44:08.962 AM com.apple.backupd[1768]: Waiting 60 seconds and trying again.
    10/29/13 1:45:20.105 AM com.apple.backupd[1768]: Attempting to mount network destination URL: afp://edbern;AUTH=SRP@TC._afpovertcp._tcp.local/edbern
    10/29/13 1:45:20.536 AM com.apple.backupd[1768]: Mounted network destination at mount point: /Volumes/edbern-1 using URL: afp://edbern;AUTH=SRP@TC._afpovertcp._tcp.local/edbern
    10/29/13 1:45:23.526 AM com.apple.backupd[1768]: Disk image already attached: /Volumes/edbern-1/EB’s MacBook Air.sparsebundle, DIHLDiskImageAttach returned: 35
    10/29/13 1:45:25.145 AM com.apple.backupd[1768]: Failed to mount disk image: Error Domain=com.apple.backupd.ErrorDomain Code=31 "The operation couldn’t be completed. (com.apple.backupd.ErrorDomain error 31.)" UserInfo=0x7f9af97030e0 {MessageParameters=(
        "/Volumes/edbern-1/EB\U2019s MacBook Air.sparsebundle"
    10/29/13 1:45:25.280 AM com.apple.backupd[1768]: Ejected Time Machine network volume.
    10/29/13 1:45:25.280 AM com.apple.backupd[1768]: Waiting 60 seconds and trying again.
    10/29/13 1:46:36.511 AM com.apple.backupd[1768]: Attempting to mount network destination URL: afp://edbern;AUTH=SRP@TC._afpovertcp._tcp.local/edbern
    10/29/13 1:46:37.340 AM com.apple.backupd[1768]: Mounted network destination at mount point: /Volumes/edbern-1 using URL: afp://edbern;AUTH=SRP@TC._afpovertcp._tcp.local/edbern
    10/29/13 1:46:40.510 AM com.apple.backupd[1768]: Disk image already attached: /Volumes/edbern-1/EB’s MacBook Air.sparsebundle, DIHLDiskImageAttach returned: 35
    10/29/13 1:46:42.150 AM com.apple.backupd[1768]: Failed to mount disk image: Error Domain=com.apple.backupd.ErrorDomain Code=31 "The operation couldn’t be completed. (com.apple.backupd.ErrorDomain error 31.)" UserInfo=0x7f9af9608030 {MessageParameters=(
        "/Volumes/edbern-1/EB\U2019s MacBook Air.sparsebundle"
    10/29/13 1:46:42.195 AM com.apple.backupd[1768]: Ejected Time Machine network volume.
    10/29/13 1:46:42.195 AM com.apple.backupd[1768]: Giving up after 3 retries.
    10/29/13 1:46:42.198 AM com.apple.backupd[1768]: Backup failed with error 31: 31
    10/29/13 2:49:46.227 AM com.apple.backupd[1880]: Starting automatic backup
    10/29/13 2:49:46.301 AM com.apple.backupd[1880]: Attempting to mount network destination URL: afp://edbern;AUTH=SRP@TC._afpovertcp._tcp.local/edbern
    10/29/13 2:49:47.381 AM com.apple.backupd[1880]: Mounted network destination at mount point: /Volumes/edbern-1 using URL: afp://edbern;AUTH=SRP@TC._afpovertcp._tcp.local/edbern
    10/29/13 2:49:50.418 AM com.apple.backupd[1880]: Disk image already attached: /Volumes/edbern-1/EB’s MacBook Air.sparsebundle, DIHLDiskImageAttach returned: 35

  • Time Machine running out of space but doesn't delete old backups

    First some context:
    I am running Parallels Desktop on a 2011 iMac. The VM is on a partition that is excluded from Time Machine.
    I have a second partition where I copy the VM every night using CCC. (This avoids TM backing up a large VM every hour).
    TM says initial backup is 220 GB. I have a 1TB USB drive attached. So normally, this works fine.
    This morning 100GB were copied to my Parallels Desktop partition. So TM should copy something in excess of 100GB during backup.
    Currently, only 15GB are free on my backup volume. But TM doesn't try to delete old backups. It doesn't seem to recognize the size of the backup. Instead when it starts, it predicts about 1GB to backup. Then during backup the amount grows (note that no new data is changed during backup!) and it finally hits the wall at 15GB because the disk is full.
    Any idea why TM doesn't figure out the real backup size?
    Here's the log from TM Buddy:
    10.12.12 13:25:13,472 com.apple.backupd[27667]: Backing up to: /Volumes/Time Machine-Backups/Backups.backupdb
    10.12.12 13:38:34,588 KernelEventAgent[48]: tid 00000000 type 'hfs', mounted on '/Volumes/Time Machine-Backups', from '/dev/disk1s2', low disk
    10.12.12 13:38:34,000 kernel[0]: HFS: Low Disk: Vol: Time Machine-Backups freeblks: 38389, warninglimit: 38400
    10.12.12 13:38:45,000 kernel[0]: HFS: Vol: Time Machine-Backups Very Low Disk: freeblks: 25589, dangerlimit: 25600
    10.12.12 13:38:45,066 KernelEventAgent[48]: tid 00000000 type 'hfs', mounted on '/Volumes/Time Machine-Backups', from '/dev/disk1s2', low disk, very low disk
    10.12.12 13:38:45,088 mds[42]: (Warning) Volume: Indexing reset and suspended on backup volume "/Volumes/Time Machine-Backups" because it is low on disk space.
    10.12.12 13:39:47,794 KernelEventAgent[48]: tid 00000000 type 'hfs', mounted on '/Volumes/Time Machine-Backups', from '/dev/disk1s2', low disk
    10.12.12 13:39:53,885 com.apple.backupd[27667]: Error: (-34) SrcErr:NO Copying /Volumes/WBackup/Parallels/Smart iMac Windows 7.pvm/Smart iMac Windows 7-0.hdd/Smart iMac Windows 7-0.hdd.0.{a09d01ec-5596-4f65-b4cd-86aeff90082f}.hds to /Volumes/Time Machine-Backups/Backups.backupdb/Smart iMac/2012-12-10-072536.inProgress/3380F092-9336-408F-90EB-387FDE60A79D/WBackup/ Parallels/Smart iMac Windows 7.pvm/Smart iMac Windows 7-0.hdd

    I would highly recommend the following resource to help you with this problem:
             http://pondini.org/TM/Troubleshooting.html
    Hope this helps

  • I have a 3g iphone and I need to know how to delete old photos from my phone!! I need the space but there is no way to delete the pictures!! Help!!!

    I have a 3g iPhone and I need to know how to delete old photos. Need to free up space and there is no clear way to delete these photos!! Can someone please let me know how to get rid of these pictures!!!! Help!!!

    There are a number of ways to delete pictures from the Camera Roll.  One is to open Camera Roll in the thumbnail view, tap the arrow button (top right), tap all the pictures you want to delete, tap the Delete button ant the bottom.  Photo Library pictures are deleted by unchecking Sync Photos on the Photos tab of your iTunes sync settings, followed by syncing your phone.

  • My Lacie external hard drive will not back up on Time Machine. Says there's not enough space. This has happened with every single external I've purchased. Thought TM was supposed to delete old backups??

    My Lacie External backed up on Time Machine after the first back up but now says there's not enough room. I thought TM deleted old back ups to save new versions. What am I doing wrong. This happens to me constantly. Every single external hard drive I've purchased for the MacBook Pro (5 of them) has not worked either initially or at the second back up. It either isn't formatted properly so I have to go to Genius bar to help me set up for the first back up, or after the first back up, it says there's not enough space and I have to go back to Genius Bar. Is there a way I can fix this on my own?

    I just purchased 2 external hardrives. a LaCie Minimus and a G Drive. Each 1 TB. The guy at Apple told me that would provide 2 good TM backups for me. My internal HD has 750 GB capacity, of which I'm using 700 GB. Perhaps the ratio is not great enough. I do wish they would have told me this before I purchased the two Bummmmer! I even had them format and get the first back-ups going because of issues I've had in the past. I also just bought a 750 GB for photos.
    So, I won't be able to buy another bigger external since I've just purchased 3. Ugh. Well, I'll just exclude some files and divide things up. Eventually, I just want my 20,000 iphotos on one of the 1TB externals, and a TM back-up on another so that iphoto will function once more. It really hates how many photos I have and is brutally punishing me for it.I seriously need to do some housecleaning!
    Thanks for the advice. Just moved from US to Australia last week and was hoping to upload a few photos and the domino effect has lead me to this. Just went to Genius Bar in Perth today and they told me how to reformat drive to transfer iphoto library over, but I got stuck at trying to back-up my TM.

  • Software Update Server - Deleting old updates to make space for new ones

    On Page 77 of the SystemImage_and_SW_Updatev10.4.pdf Apple recommends "deleting old updates to make space for new ones". I've looked and searched and yet to find a way to do this. The Server Admin interface and the command line options I've looked into don't appear to provide this option.
    So I actually tried stopping the server, moving the updates from /usr/share/swupd/html to another location, starting the server, the server wouldn't start, moving the files back again, the server still won't start.
    1. Does anyone know how you're supposed to "Delete old updates to make space for new ones"
    2. Does anyone have any suggestions as to how to get Software Update service running again?
    Power Mac G5   Mac OS X (10.4.7)  

    Does this article contain anything useful?
    (16738)

  • TS4009 How do I clean up mail in my icloud?  I have already deleted old mail on all devices, and emptied the junk & deleted files, but it still shows that I am at max on my icloud. What do I do to free up space? (photos & apps do not take up that much roo

    How do I clean up mail in my icloud?  I have already deleted old mail (from all my e-mail accounts) on all devices, and emptied the junk & deleted files, but it still shows that I am at max on my icloud. What do I do to free up space? (photos & apps do not take up that much room).  When I go to manage storage on any device & it will display how much room each program or app is using, it still shows that my e-mail is taking up the most room.  Is there a way to actually log on to the icloud server to manage what it stored there?  If so, how do I do it?  Also, on a related subject,  why does my mail not sync accross all devices?   ie. when I delete an email on one device, why do I still see it on all my other devices?  How can I change this?
    I have an iphone5, ipad2, ipod 4th gen, ipod 3rd gen, all running on my same apple id - but I have a PC not a Mac home computer - is this part of the problem?  Looking to upgrade to a Mac sometime this year...
    Thank-you for the help!

    beckyfromoz wrote:
    I do have the Time Capsule and spoke to Apple Care here in Sydney about it yesterday.  They told me my mail is not backed up there unless I create a special folder. I just tried ringing them again but Apple Care is closed today...
    Mail is backed up automatically. If you make backups automatically, open Mail application and then, open the Time Machine app (in /Applications/Utilities). You will access to the Time Machine interface, and you will be able to see all your mails of all the backups you have, and you will be able to restore them. It means that your mails are backed up onto the Time Capsule

  • HT4847 I can not delete old icloud back up from my old phone, keep receiving an error message "this back up can not be deleted because it's in use" it is not in use that phone is long gone!

    I can not delete old icloud back up from my old phone, keep receiving an error message "this back up can not be deleted because it's in use" it is not in use that phone is long gone!

    I have the same problem here and it wont let me do another back up or delete the old one.... Please help!!!! Anyone

  • How do i delete old apple id's

    How do I delete old apple id's?  I have a new Iphone 5 and every time I try to download a new app my old apple id is presented and asks for my old password which I can't remember.  So frustrating.  I have a new apple id that works so I need to delete this old aol id.  please help.  thanks.

    Go to settings and sign out of the old id and into the new one (covered in the manual)..

  • How do I create a new user, move my old files etc over, and delete old user

    This is why I think I need to.
    My computer got hit by lightening, and I may have created a new user account through netinfo rather than system preferences /accounts/+user. Mail used to open twice, but no longer. Now, Safari askes me for my keychain password twice, Spotlight can't find a folder on the computer when the search is restricted to folder and computer, though the folder is there and easyfind finds it, and when System Preferences/Spotlight/Privacy has the hard drive icon added, then deleted, Spotlight still does not find anything. (Yes, everything is backed up, on CD, DVD, and online.) Microsoft Tec Support says
    "Here is a summary of the key points of the case for your records.
    When you contacted us on August 8, you had requested assistance with Microsoft Office 2004, as your installation of the updates was unable to find the correct version of the software to update. After creating a New MAC User, we identified the issue to be with a corrupt MAC User account, and not a Microsoft issue. "
    I believe Microsoft. So, creating a new user was easy.
    But copying files uses up too much hard drive (movies, music), and may miss keychains, preferences, mail, address book, and documents. Since Spotlight no longer works, who knows what is happening. (Yes, I've repaired persmissions, and disk repair. No change). I'm using up my hard drive trying to move files to the new user. If I share files, or put them into a public folder, then delete the old user, will I still have the old user's files in the new user's account? It is not clear to me what I should be trying to do in order to create a new user, move my old files etc over, and delete old user. Thanks.
    My responses will be slow, because I have to drive to town to use the internet. I've ordered a new airport which may take care of that problem. SO be patient.

    Hey -
    I need to do the EXACT same thing, but have no idea how. Has anyone out there done this?
    My situation is a tad different..this is a new Mac (and I'm a brand new Mac user). Tons of querks occur under my original account (videos won't run, Safari won't support certain plug-ins). I spent 6 hours on the phone w/ 4 different Apple Reps and nobody could fix it. A rep finally looked at my MacBook Pro in person today. He created a new account just to see if that would work and under that new account, everything works perfectly fine (no querks, can view video). He tried switching a million settings in my original account to no avail.
    He said to create a new account (as he did) and move my files over to the new account and then go back to the original and delete it. How do you do this?! I can't figure it out! I've got a new account created, but of course it just has the default folders in it w/ the little red icons next to them! Thanks in advance!

Maybe you are looking for

  • How to register adobe media encoder cs6

    Please anyone could explain to me how to register Adobe Media Encoder CS6. When I installed the new AP 10. I began to prepare my presentation and when I tried to import a video from my hard drive to a slide. It prompt a message Thanks for using AP 10

  • Grouping '# of Tasks' per Contact for Graph

    I'm trying to report in a Graph that: X amount of people have 1 task under their record and Y amount of people have 2 tasks under their record. It seems to work if I list each Contact ID, but I want to plot it on a graph. I've tried different formual

  • How to email Adobe staff working in USA only-re website?

    I had no luck in adobe.com website CHAT in getting adequate answer due to person not understanding English well. I can't get a live person when call 800# as auto-robot-choices-asks about specific software choices then says to go to website, can't tal

  • Export with watermark not working...

    I can no longer export a photo with Lightroom 5.3 with my watermark.  I have tried unchecking and rechecking the watermark, and using a varieties of watermarks and photos. The photo will export just w/o the watermark. I have also closed out Lightroom

  • Iphoto 09 and yosemite osx

    I'm running maverick and iPhoto 09 (8.1.2 build 4.2.4). I have 2 photo libraries. (45GB and 28GB)  Thinking of upgrading to yosemite osx. Tried to update the iPhoto to version 9.6 but it says "iPhoto can't be installed on "Macintosh HD" because OS X