Deleting Outbound Queues in SMQ1
Dear Experts,
System landscape: ECC 6.0, SRM 5.0
I started intial load using DNL_CUST_PROD1 in R3AS and my outbound queue in SMQ1 (ECC) contained an SYSFAIL status. So I would like restart the initial load again from SRM.
Can you please let me know if I need to delete this outbound queue or resetting the status to READY is enough.
If I need to delete the queue, can you please let me know how to delete this outbound queue.
Points will be rewarded.
Thanks in advance,
Bob.
Hi Bob,
I'm not sure if I completely understand your question.
You can delete the outbound queue and start the initial load again. In order to do so, just select the queue (click on it once) and then select the trash can icon on the top left side. Or else you can just right click on the queue and select the "Delete" option.
Hope this helps!
Thanks,
Aravind
Similar Messages
-
Delete Outbound Queue : SMQ1
Dear Friends
I am upgrading my ECC6 PRD Server by EHP5.
My Check Roadmap step has been completed with warnings!
I Knew it to release and delete by the LBWE and LBWQ.
But my question is that i need to delete it now in CHECK and PREPROCESSING phase.
or
Delete it in the DOWNTIME phase ! becuase, the PRD system in integrated with BI PRD server and the data is collecting each hourly.
Please advise.
A2EEMCEX 151 Entries for application "11" still exist in the extraction queue ->
Long text:
Cause
Changing extraction structure &V#& for application &V#& is forbidden,
because there are entries that have not yet been processed into an
extraction queue for application &V#& for at least one client.
If an extraction structure is changed to the entries that are still
open in an extraction queue, then these are no longer able to be read
and can cause terminations with the collective update.
What to do
Start the collective update using the function "Job Control" in the
<DS:TRAN.LBWE>Logistics Extraction Structures Customizing Cockpit</>.
To get an overview of the logistics extraction queues, see the
<DS:TRAN.LBWQ>Logistics Queue Overview</>.Dear Anwer,
As long as you are in prepare or uptime of the upgrade you can
ignore the errors in the RSVBCHCK which say that there exist
update records (as it is normal that there are update records
in a system which is productively used).
In the downtime there is also a check on update records. In the downtime
this check cannot be ignored.
You can also read note 328181.
Please also refer to the upgrade guide with this regard.
SAP Enhancement Package 4 for SAP ERP 6.0 ABAP:
page 105********************************************************
Outstanding or Incomplete Updates (Phase JOB_RSVBCHCK2)
If there are any outstanding or incomplete updates, the upgrade stops in
this phase with a message.
If errors occur in this phase and you have not stopped production
operation yet, you can skip these
errors with ignore without entering a password. However, we recommend
that you check for these updates and clean them up. The message is:
Update records still exist - Please process
page 103*******************************************************
Update records still exist - please process
Make sure that you have cleaned up all outstanding updates.
Make sure that you have cleaned up all outbound queue RFC calls by the
JOB_RSVBCHCK_R or JOB_RSVBCHCK_D phase (during downtime) at the latest.
If you are still in the preparation phase (before the beginning of the
Preprocessing roadmap step) and therefore in production operation, you
must only delete the terminated updates.
Also during the production downtime for such issues you can check the
following information:
This error is caused because the updates have been deleted but
entries in tables related to the update process are not empty:
- tables VBDATA,VBMOD and VBHDR should all be empty
To avoid the error message , run report RSM13002 with "delete" option
to delete update records as explained in attached note 67014. After
that you can repeat the phase, the incidence should have been solved.
-> 67014 - Reorganizing update requests
Information remains same for EHP5 as well.
Regards,
Abhishek -
Unprocessed Outbound Queues on SMQ1 with Status NOSEND...
Dear Experts,
We have following 4 Queues which have NOSEND status:
BW0110BPARTNER_ATTR
BW0110BPARTNER_TEXT
BW0110BP_DEF_ADDRESS__A1
BW0110CRM_SALES_ACT_1
I cannot unlock this and activate these as the system displays message: LUWs in status NOSEND must be picked up by the application.
I need your help to know how to process these queues.
Best Regards, MurugeshHi Murugesh,
The four queues that you have mentioned are BW specific queues. These cannot be unlocked or activated from the CRM system. For BW queues in CRM, it has to be processed or called from the BW system. BW queues will always be in status 'No Send' in the crm system unless and until it is called by the BW system.
Regards,
Ratish -
Deleting an outbound queue SMQ1
HI,
Can you please verify, is it ok to delete an outbound queue in smq1? The situation is, we have tried a delta load but we already aborted it since it is not needed anymore. But when we check on smq1, the queue is still there and it's status is running (transaction executing). What will happen if that queue will be deleted? will it cause data lost? Please help. Thanks!
Kind regards,
MikeHello Mike,
This shouldn't be a problem. And there won't be any data loss. however you might see additional table entries in your CRM or ECC(depending on what was the destination) for the LUWs that were already processed in your delta load.
Apart from that , no issues -
Outbound Queue got deleted during ECC upgrade
Hi,
After ECC EHP6 Upgrade Outbound Queue in SMQ1 got deleted for data source 0F_GL_14 in ECC, but delta queue exists under RSA7.
how to re-generate outbound Queue which got deleted during Upgrade?
SanthoshHi Shantosh,
In this case, please follow the below steps -
1. Delete the delta for your info package, and do init without data transfer.
2. After this first fill your setup tables with SBIW tcode,
3. And run your Info Package with Repair full request the data will come to PSA now, anyway ur DSO will overwrite all the existing records and add only the fresh records.
4. Later enable your delta for the Info Package. This will absolutely go fine.
Thanks..!!
Regards,
Harish. K -
CRM 5.0 outbound queues to Mobile sales
Hi all,
We have upgraded from CRM 3.0 to CRM 5.0.
I am looking at the outbound queues in SMQ1 that are bound to Mobile sales Sites and am not finding any data bundles other than the name of the Replication Object name in the LUW's of these queues.
But in CRM 3.0 I am able to see detailed data bundles for any of the queues.
Does this mean no data is actually being passed from CRM to Mobile Sales.
At this point of time I dont have my commstation up and running to verify this. So I am curious to know how else can I check this?
Thanks.Hi KP,
This is the default behaviour in 5.0...the queues are fine and you can go ahead with the sync using Conntrans.
Regards,
Ankan -
Detected Blocked Outbound Queues
Hi All,
We have found detected Blocked Outbound Queues in SMq1 CRM PROD System and we have checked log , its shows below log.
400 R3AUBUPA0008063715 RP1CLNT400 4 CPICERR A3A4176F143C4F3031E8C711 06.02.2012 20:02:48
400 R3AUBUPA0008063722 RP1CLNT400 4 CPICERR A3A4177004E04F3031E9148F 06.02.2012 20:02:49
400 R3AUBUPA0008063751 RP1CLNT400 4 CPICERR A3A4176F174C4F3031E9C4BB 06.02.2012 20:02:49
400 R3AUBUPA0008063753 RP1CLNT400 2 CPICERR A3A4177002984F3031EA5DFE 06.02.2012 20:02:50
Status shows CPICERR ,Error when opening an RFC connection .
But i have checked RP1CLNT400 test connection is successful .
Kindly suggest .Hello,
Check the following notes:
[378903 Queue status in SMQ1, SMQ2 and table ARFCRSTATE|http://service.sap.com/sap/support/notes/378903]
[430980 CRM Server: Analysis in delta data exchange R/3->CRM|http://service.sap.com/sap/support/notes/430980]
Regards,
Eduardo Rezende -
Need to know how to check the outbound queue in SAP for data flow into CRM
Hi Specialist's,
I have changed an entry in Customer Master Data in Sap r/3 and this change has come fine to CRM system.I checked the inbound BDOC in CRM ( Trn:SMW01) and it has come fine into CRM system.I am also able to see the affected field in CRM with new value.
I need to know how to check this from SAP side i.e. I have checked the outbound IDOC list (WE02) but could not find the record.
Is there any other way in SAP that i can check?
Also please let me know if there is any other way except IDOC in SAP to send data from R/3 to CRM?
Usefull answers will definitely be rewarded with points .
Thanks,
Abhinav.Hi Abhinav,
There are no IDOCs generated in R/3 for replication. R/3 system calls BAPI and Function modules remotely on CRM system which are part of the Adaptors provided for middleware.
Try to deregister the outbound queues in R/3 (Transaction SMQS) and see if you get an entry in the Outbound Queue (Transaction SMQ1). I have not tried this.
If you don't get any entry in the outbound queue then definitely there would be some FM at R/3 end which would be calling CRM system remotely.
<b>Reward points if it helps.</b>
Regards,
Amit Mishra -
Monitoring qRFC outbound queues
Hi,
I need a CCMS monitor on qRFC outbound queues (tcode SMQ1), so that I get notified whenever messages gets stuck for some reason.
I tried with MTE class "CCMS_qRFC_Outbound_Queues_Summary", but it stays green, even after several messages are not processed in the outbound queue.
Does anyone have experience with this?Read SAP Note 441269 - Setting up tRFC/qRFC monitoring in the alert monitor
That should put you in the right direction.
Regards
Juan -
Deletion of Queues while upgrading the patches in ECC
Dear Experts,
We wanted to upgrade our ECC system with the new security patches and during that it is throwing an error.
After analysing the error, found a SAP note 1081287 stating to delete BW queues in SMQ1 inorder to make it succesful.
But as deletion of queues before loading data to BI will miss records.
Is there any other way to take backup of the queues which are not yet loaded to BI before deletion so that without missing any records, I can restore my queues after the upgradation of the patches.
Will be very thankful if anyone responds at the earliest.
Best Rgds
KumarHi Kumar,
You would need to run the V3 jobs for all applications so that data will be written to the delta queues from the update/extraction queues. Then do delta loads from BW. Then you can clear the queues and no data would be lost. -
Struck up with R3AD_* Queues in SMQ1(Outbound Queue in ECC Side)
Hi ,
I am using CRM Middleware for replicating business partner(BP) from CRM to ECC
and material from ECC to CRM.
BP and Materials are replicating well.
My Issue is,
while checking queues in SMQ1 (Outbound Queue in ECC Side), i am getting many queues are pending also
status as "SYSFAIL".
QUEUE Names are R3AD_000000123,R3AD_000000139,R3AD_000000141... R3AD_*,etc..
I tried to unlock the queues and activated, afterthat also queue status is "SYSFAIL". Then i checked in CRM side
Transaction Code SMW01,
BDOC Details:
BDOC State Description: Information no processing.
BDOC Type :BUS_TRANS_MSG.
ERROR Message:
a.Processing of document with GUID 4E57E4A5108162A7E10000000A0BE02A is canceled.
b.Business transaction type ZEQQ does not exist.
c.Validation error occurred: Module CRM_DOWNLOAD_BTMBDOC_VAL, BDoc type BUS_TRANS_MSG.
Thanks and Regards,
Ravi AMaintain a filter in ECC go to Tcode SM30 , then go to table/view and enter CRMRFCPAR click maintain and enter
User CRM
Object Name SALESDOCUMENT
Destination xxxxxxxxxxxx
Load Type delta download
Queue Name
Queue Name
BAPINAME
INFO
InQueue Flag X
Send XML
CRM Release 700
Logical system xxxxxxxxxxx
this will stop the flow of ecc sales documents to crm
this will also stop Bdcos in SMW01
Please let me know if this helped -
Hi Experts,
Could you please let me know the purpose of SMQ1 and SMQ2.
Because when i saw the transaction SMQ1 i am able to see even the queues for
0FI_GL_6
0FI_GL_7
1_CO_PA333ZPAC4.
But when i saw the transaction LBWQ it only contains the Logistics related extract structures.i am aware of LBWQ where the user postings will be saved here with the help of VI Update.
Regards,
Sunil Kumar.BHi,
SMQ1 and SMQ2 is used to view the Outbound and Inbound Queue :-
SMQ1 u2013 qRFC Monitor for the outbound queue You use this transaction to monitor the status of the LUWs in the outbound queue and restart any hanging queues manually.
SMQ2 u2013 qRFC Monitor for the inbound queue. You use this transaction to monitor the status of the LUWs in the outbound queue.
You can get more help from following link :-
http://help.sap.com/saphelp_nw04/helpdata/en/76/e12041c877f623e10000000a155106/content.htm
Navesh -
Dear All,
There are lot of outbound queues in our CRM production sytem which are older than one month,basis is asking wether we can
delete those queues or not,request you all to help me wehter we can delete it or not.if anybody can put some light on how the
queues are getting there then it will really helps..
Thanks,
SaptaCheck in SMQ1 transaction. You can see whether you require them meant for any active extractors running delta or running in regular frequency for your loads.
-
Gerneric Datasources and Outbound Queue
Dear Experts,
I've got some generic Datasources (Delta and Full Update) that work properly with productive BW-System.
Now I'm starting to build up an developement system (wrong order I know) and want to load data using the mentioned Datasources from time to time to get relevant data for testing.
Problem now is, that the generic delta Datasources fail accourding to doublicate keys (loading to dev-system) although in the basic tables for these datasources no doublicate keys are existing (or even are possible due to the table key).
I realized in smq1, that every time when data is transfered to productive BW-System, the counter to the queue for dev-System is incremented. When I delete all the entries in smq1 all the updates for dev-System work fine.
In one of the threads here I read, that generic Datasources do not have outbound queues. (Re: Generic Data Source issue).
So is there any way to turn of the outbound queues for specific (generic) Datasources? I do not want to turn them of in general as we use standard delta Datasources for Controlling.
Or how is the "normal" way to transfer data to a dev-System?
(One more information: productive system is 3.5; dev-system is 7.1.)
Thank you in advance
Kind regards
Philip
Edited by: Philip Munz on Nov 17, 2009 8:50 AMok,
after some days of searching and reading I now understand my problem.
For all, who face the same problems in understanding delta-updates, qrfc, rsa7 and so on, please have a look at
http://www.sdn.sap.com/irj/scn/index;jsessionid=(J2EE3417800)ID0216771750DB11245246034303112354End?rid=/library/uuid/40427814-376a-2c10-5589-bc1aaa6692c3&overridelayout=true
again thanks for the help
kind regards
Philip -
Outbound Queue stacking up for old destination
Hi Gurus,
I am implementing APO in a client and since the native integration (CIF) uses the same RFC structure as BW I need to keep an eye on BW processes as well.
The problem here is that they´ve migrated to BW7, killing the old 3.5 but leaving the logical system registered.
Now what is happening is that I found >4million queues in SMQ1 to this nowhere destination, which kills my CIF performance.
We´ve started to clean this garbage but the stack keeps adding up from regular goods movement transactions. The BASIS and BW team is not helping much so:
I need to find where I set the relationship between theses transactions and the destination so it does not go to the outbound queue.
thanks for the help!Hi Anand,
Please go to SMQ1 and in qname enter cf* and then execute.
In the error screen press F8 and then select all PPM related queues and delete.
After that run IM after correction and do run CCR report for the reconcilation by tcode :/SAPAPO/CCR .
Manish
Maybe you are looking for
-
How do I get my MacBook Pro to play sound on my TV correctly?
I got a Mini-DisplayPort-to-HDMI cord so that I can watch Netflix, etc. on my Samsung TV screen. I went to Sytem Preferences, then Sound, then changed output to HDMI, so that my computer plays audio through my TV speakers as well. When I use somethin
-
Migrate from Server 2003 (no Exchange, single server) to SBS 2011
Are there any Technets or other Microsoft documentation on migrating from Server 2003 (no Exchange, single server) to SBS 2011? I understand it is possible, but I would like confirmation and some documentation before purchasing the appropriate hardw
-
How to deploy a servlet on WebLogic 6.1
I have tried to deploy a servlet using WL6.1 following the instructions at this URL : http://edocs.beasys.com/wls/docs61/quickstart/quick_start.html but whenever I try to access the servlet from the web browser I get a H
-
I.cant.get.pics.on.my.ipod.
Can I Please Get Some Help?? Windows Windows XP
-
HT5191 Does this 6.0.1 update only pertain to iphone5?
The new update 6.0.1 only pertain to iphone5. If not what does it do for iphone4. I downloaded the last update for my phone and lost passwords for itunes. I cannot update old apps because of it. I lost the itunes password because of that update leadi