Deleting Parked Documents for Previous Years

Hi
We have got 800 parked documents with a posting date between March 2003
and May 2010. As per audit requirements we need to delete all these
parked docuents which are mostly created through Tcode FV50 or FB50
usin parking option as we don't want to actually post them in system.
These docments have profit centre or cost centre entries in them as
well. Now when we try to delete these parked documents we get an error
message 'Transaction CO Through-postings from FI has been locked'. We
don't want to open the close CO period as it can use great problem to
us so can you please tell us some alternate way or some programme which
can be helpful to delete these parked documents without opening the
closed CO periods. I will really appreciate your kind response in this
regard.
Kind Regards

I just attempted to duplicate the error message you were getting by pinpointing a parked document from 2006 created using FV50. I verified that the document contained cost centers and all CO posting periods from 2006 were locked in OKP1.
I pulled up the document in display mode, clicked on Document in the top left corner and went into change mode, then I clicked on document again while in change mode and selected "Delete Parked Document" and the document was deleted without error. Is this the same deletion method that you are using?
Like the previous response, I don't see how opening the CO posting periods will have any negative impact especially if FI posting periods are left closed.

Similar Messages

  • Security for deleting parked documents

    Is there a way to secure who can delete parked documents? Currently, we only allow a certain group of users to delete parked documents. However, I would like to have a way for the creator or someone authorized for the account to delete them instead.  When we first tested it some time ago, there did not appear to be any checks for security authorizations.
    We are on ERP 04 (ECC 5.0).
    Any suggestions?

    I just attempted to duplicate the error message you were getting by pinpointing a parked document from 2006 created using FV50. I verified that the document contained cost centers and all CO posting periods from 2006 were locked in OKP1.
    I pulled up the document in display mode, clicked on Document in the top left corner and went into change mode, then I clicked on document again while in change mode and selected "Delete Parked Document" and the document was deleted without error. Is this the same deletion method that you are using?
    Like the previous response, I don't see how opening the CO posting periods will have any negative impact especially if FI posting periods are left closed.

  • Tracing the Customer Number For deleted parked document

    Hi,
    I have wrongly deleted the park document . My client wants to know the customer Number of the deleted park document. Where  can I fetch this details from.
    I found that the  Accounting document  Number is stored in table BKPF with a deletion flag Can u please suggest which table the deleted customer no. for the park document is stored
    Thanks in advance
    Ratna & Susan

    Hi Rathna
    Oneway to find out the customer number is, thro transaction FBL5N, select all customer open items (with key date before the parked document was deleted) and select the noted items also.
    You will be able to see the document.
    Thanks
    Ashok
    Reward points if this is useful

  • How to list Deleted parked documents

    Hello friends
    I have a question that I wait you can answer it. I need a report that shows the deleted parked documents. I have been trying through FBV3 and FB03 but don't show documents.
    I am currently working on a project implementation R / 3 version 6.0. Here are a user that has created a lot of parked documents that can be displayed in FB03 and FBV3. But every deleted parked documents (BSTAT = Z) don't are displayed.
    For more information, I tell them the steps we are taking to this:
    1. We created a park document
    2. We delete the park document
    3. We enter to FB03 with number, company code and year and can see document
    4. After that we push document list button and dynamic selections (BSTAT = Z) and execute
    5. Document list is empty
    6. We check document in BKPF table and can see that has BSTAT = Z
    I have been looking SAP Notes about this and found 1320519 and 1317523, but aren't precisely about my problem.
    I wish you can help me, either with a good report or a note to correct the problem.
    Best Regards
    Marco

    Thanks by your answers, but I'm still in a doubt.
    If document is still in BKPF, should be display when I execute list button and dynamic selections in FB03?.
    Because this, I feel that reports RFBUEB00 and RFBUEB01 needs a correction.
    Am I in correct or not?
    Greetings
    Marco

  • Delete parked document still committed budget

    Dear SAP-ers,
    I do budget active checking with BCS, the problem is when i do deleted Parked Document using FBV0, the budget still committed. For display this, i am using the standard report painter 4FM (Budget Usage).
    Anyone can help me ? 
    Thanks
    Regard's
    Silvy

    HI,
    Please refer the note 100409.
    Reg
    Madhu M

  • 50% credit on capital goods for previous year is not availed

    Dear All,
    The go-live date for my client was 01.10.2009. Now, in Apr, 2010 when the client is trying to get the 50% credit on Capital Goods (t. Code j2i8),  system is not generating any data of the previous year. (From Oct, 09 to Mar'10).  However, if we see the GL Balace for 'Cenvat On Hold A/c' as on 31.03.2010, it shows a  balance of Rs. 2.50 lakhs approximately.
    Can you please tell me why system is not showing any details through j2i8 for previous year?
    Thanks & Regards,
    Reshma

    Hello,
    The settings before 01.04.2010 were same.  However, after thorough checking of the GL A/cs, I have following observations -
    1) Plant 1 - Balance as on 31.03.2010 in Cenvat on Hold A/c -Rs. 195080. It is upload balance & t.code used is FBVB
        There are some more transctions in this A/c which are  reversed due to wrong entries.
        Balance in Excise Duty RG 23 C as on 31.03.2010 - NIL
    2) Plant 2 - Balance in Cenvat on Hold A/c as on 31.03.2010 is  Rs. 166701. Again this is an upload balance with FBVB
        Balance in Excise Duty RG 23 C as on 31.03.2010 - Rs. 56931.62
    3) Plant 3 -  No upload balance.  All the transactions are routed through J1IEX except 1 from FB01
        Balance as on 31.03.2010 - Cenvat On Hold A/c - Rs. 86876.06
                                                     ED RG 23C  - NIL
    Hence, would like to know -
    1) Any separate procedure to take the credit of upload entries?
    2) If the Balance in ED RG 23C A/c is NIL, will it affect on taking credit?
    Thanks & Regards,
    Reshma

  • ORD to AUC settlement for previous year

    Hi All,
    We have a scenario wherein some expense exists on the Internal order for 2014. The Asset fiscal year has been changed to 2015.
    While trying to settle the ORD to AUC for current year, we get a message to do the settlement for previous year.
    I checked the SAP notes, it recommended:
    1. To do a PRE settlment to Cost Center/receiver in 2014,
    2. Manual reposting of cost from the receiver to ORD in 2015, and
    3. AUC settlement in 2015.
    Please suggest if there is any other way to do it with/without opening the previous fiscal year.

    Hi Pankaj,
    Check the settle parameters of the order, have you defined settlement type as "periodic settlement" for the asset. If yes, add another line for full settlement for it. Then do settlement for 2015 with processing type as "Automatic", then system will post to 2015 for the asset.
    Regards,
    Mukthar

  • Customizing setting 'Recalculate depreciation for previous years'

    Dear Experts,
    I have requirement where for tax depreciation areas we want the system to recalculate the depreciation for previous years. For e.g.
    Asset acquired on 7/1/06 with value 10000
    Useful life: 5 years
    Take over date in asset accounting: 9/30/2008
    With the above example, I want the system to show me depreciaiton values for the years 2006 and 2007 also in transaction AW01N (Asset Explorer), apart from 2008.
    In FI-AA customizing, I have enabled the relevant depreciation areas for recalculation in the node 'Recalculate Depreciation for Previous Years' (Transaction OAYF).
    However, when I create the legacy asset and maintain the takeover values, the system just shows me depreciation for 2008 and onwards.
    Is there something I am missing? Please advice. I have searched the SAP help and SAP notes, but did not find anything.
    Regards,
    Vishal.

    This is not possible.  When you takeover an asset using AS91, it is creating an ANLC entry for that year only.  2008 in your case.  Regardless of when the asset was originally acquired, SAP will only let you report on it back to 2008.
    This concept is no different than any other FI/CO legacy conversion.  If the customer is going live on Jan 1st 2008 but they want to do monthly comparison reporting in SAP (Jan 07 and Jan 08), then they need to convert 2007 data.  If they want 2006, they need to load that too.  Etc.
    For FI-AA, if the customer wants to view data back to 2006 you would have to change the takeover date to that year and adjust the data as well (accumulated depreciation).
    -nathan

  • Close budget for previous years

    Hi,
    The system Iu2019m working on has commitments management active, so when I create a purchase requisition or purchase order, the budget is affected. Iu2019ve noticed that the field that determines the year relevant for budget availability is the delivery date (EEIND).
    So if I make a purchase requisition today, with a delivery date of 2007, for instance, it will affect the budget from 2007 year. I donu2019t want this to happen. Is there any way to u201Ccloseu201D the year budget and donu2019t allow any more values to affect the budget for previous years?
    Thanks for any help.

    Hello,
    Please check the budget profile.
    In budget profile, you will have how many previous years or future years you can budgeted. Try to reduce one year for previous years.
    Regards,
    Ravi

  • How we create Variable for Previous year for COPA reports

    Hi Guruss,
    I am making a COPA report for Current year comparison with previous year from KE31. For 1st column I have created the Variable for current year (which works perfectly) now in 2nd column i need the actual data pertaining to previous. So can any one please guide me how to create the variable for previous year.
    Thanks

    Thanks Jagannadha,
    I have create the variable for current year on KE3E. but i am confuse how i create the variable for previous year on KE3E.
    Waiting for reply.

  • Delete parked document with IDOC related

    *Hi Friends*
    *I have a case with FI parked document and there's a related IDOC, user try to delete parked document but get authorization not acceptable outside workflow.*
    *i have checked the IDOC and found that the work log is empty with 0000000 values*
    *No work item.*
    *so i couldn't change idoc status to WFER to allow user delete related document*
    *any advice on how to delete that parked document.*
    *many thanks*
    *Hana*

    HI,
    I am not aware of any program or tcode to delete idocs in sap.  However, idocs can be archived depending on the idoc status.
    The configuration is in transaction code WE47.
    - Check the idoc status in WE47  to see if the idoc can be archived.
    - We need to run archive program to archive the existing idoc. 
    Thanks,
    Ram

  • Deleted Park Document

    Hi,
    Is it possible to retrieve deleted park document?
    Regards,
    Binay Agarwal

    hi Binay,
    unfortunately it is not possible. It is one of the few things which are completely deleted from the SAP database. You can check in table BKPF, there will be a gap in the document numbers of you delete a parked document.
    hope this helps
    ec

  • Carrying forward the parked documents of previous fiscal year

    Hi Experts,
    My requirement is to carry-forward the parked documents of the previous fiscal year to the new fiscal year automatically with a background job that should run at the end of each fiscal year.
    This job should check all the documents that are still parked and must carry them to the next fiscal year. As per standard SAP, the document should be manually posted with posting date of the new fiscal year. Then the system will create a new Document in the new fiscal year, deleting the old document. I need to automate this process.
    For posting a document we use a Customized Workflow (Z copy of FIPP).
    My question is, how can I go about this requirement? What all needs to be done if I want to trigger the workflow in the background on a particular day?
    Thanks!

    Sheryl,
    If you really want to "remove/cancel" the parked documents, then your solution is to delete them as Prashant previously suggested.  Transaction FBV0 allows you to post or delete a parked document.  Deleting the parked documents does not remove the entire document from the system.  It will remove any line item information, but it will leave the header information.  With the header information, you will still have record of the document numbers for audit purposes.  The status on the header will show "parked document which was deleted".  Deletion is the standard SAP solution to "remove/cancel" parked documents - the only alternative to deleting a parked document is to post it.
    Park a document on your test system then delete it so you can see the results.  You will still be able to pull up the header information in FB03.
    I am not aware of any standard SAP reports for listing parked documents that were deleted.  However, if you require such a report, you could create a simple SQ01 query against table BKPF.  You would want to include the Document status field (BSTAT) in the query selection criteria so you can select documents with a status of 'Z' - parked document which was deleted.
    Regards,
    Shannon

  • Document split for previous year open item

    Dear All,
    We have upgraded from 4.6 to ecc 6.0 .I have a problem of document splitting .
    Suppose there is open item of previous year i.e vendor  and after 1.4.09 the liability is transferred to another vendor the system gives me error that' profit center field in line item 001 is not filled' which seems correct as open item before 1.4.2009 does not have profit center.If the same liability is paid through bank than bank a/c is maintained in 3kei and document gets posted.
    Also when salary is paid ,some salary is deducted for paying lic premium so salary payable account is credited  on 31.3.09 and after 1.4.09 the same a/c is debited and credit is given to LIC OF INDIA.
    Both payable a/c and lic of india are balance sheet items and system gives me error while posting the documents.
    If the same transactions are after 1.4.09 the system inherits prctr from previous transactions but since in above examples there is no prctr in previous documents the system throws error message
    'profit center field in line item 001 is not filled' .
    Kindly provide me suggestions
    Thanks and regards
    vijay

    Hi,
    Thanks for your reply,
    Yes we have migrated on 1.4.2009 and test migration have been performed .
    But my client is to close books of accounts so it is having the said requirement of vendor to vendor transffer,kindly suggest me other alternative
    Regards
    vijay

  • MBST finds document in VBFA and accesses LIKP for previous year document

    Hi all,
    I don't know if this is the right place to post. As an ABAP developer, I'll put my query here :
    Scenario : In MBST, for a particular document type and year 2012, it displays error and says "No Authorization for shipping point X", though the document is posted againt another plant/shipping point Y. This material was posted for X in 2011. And we are not able to determine why MBST is picking up 2011 record.
    Analsysis :
    On debugging, we found -
    There is an FM "WS_FIND_ORIGINATE_DOCUMENT" called in program LMBDFU01.
    This FM is called on pressing enter on the initial screen in MBST i,e before we press Save.
    Here there is a query to where it finds the document in VBFA :
    SELECT * FROM VBFA APPENDING TABLE XVBFA
                             WHERE     VBELN   = MBVBFA-MBLNR
                             AND     ( VBTYP_V = 'J' OR VBTYP_V = 'T' )
                             AND       ERDAT LIKE BELJAHR
                             AND       VBTYP_N = 'i'.
    Here it doesnt find document for 2012, so it searches for 2011 (subtracts 1 from the year passed in MBST).
    It finds a document for 2011 in VBFA and picks up the corresponding VBELV and passes it into VBELN in LIKP and hence fetches the previous year record and plant and authorizes the user against it.
    In ideal condition, there is no document fetched for any year from VBFA and no LIKP is accessed. Any idea on why there could be a document present in VBFA for this document ? And how I can prevent from selecting this record as this is standard.
    Thanks and Regards
             Vivek

    Hi,
    Thanks for your reply,
    Yes we have migrated on 1.4.2009 and test migration have been performed .
    But my client is to close books of accounts so it is having the said requirement of vendor to vendor transffer,kindly suggest me other alternative
    Regards
    vijay

Maybe you are looking for