Deleting photos in iPhoto, deleted my FB/Flickr account photo too

I have shared photo on Facebook or Flickr using iPhoto. If I delete those photos in iPhoto, it deletes photo from there too. How can I prevent this and delete only from iPhoto?

By not using iPhoto to upload.
When you do this you're telling iPhoto that you want it to manage your photos online too. So when you delete them from iPhoto, it assumes that you no longet want the photos anywhere. As you don't want to manage the photos online with iPhoto, don't use it to upload.
Regards
TD

Similar Messages

  • I don´t get the option in itunes to import photos from iphoto, how can I get my photos in my ipad?

    I don´t get the option in itunes to import photos from iphoto, how can I get my photos in my ipad?

    So you don't see this and you cannot navigate to it when you select Choose Folder from there drop down menu?

  • Can you upload photos that iPhoto "deleted" but are still on camera?

    I was in the middle of uploading to iPhoto from my Sony Cybershot DSC-W120 when the camera's battery died. iPhoto said there'd been an interruption, etc. When I went to re-try uploading the photos once the battery was charged, only some of the photos uploaded. Unfortunately I didn't realize this and so when iPhoto asked me if I wanted to delete the photos on the camera, I said yes.
    I have looked on the camera and the photos are still there in the same place they always appear when I review them, although some of them have a circle w/ an X through it in the bottom right-hand corner of the image. iPhoto says there are no photos to upload.
    I disconnected the camera, turned it off, quit iPhoto, started up the camera, reconnected it; iPhoto started up again, but still says there are no photos to upload. I did not use the camera to delete the images, I only clicked "delete photos" in iPhoto. I have noticed that only clicking "delete photos" in iPhoto means that the images remain in the camera, though perhaps in a different folder. It is only when I actually use the camera to delete the photos that they are truly gone.
    Does anyone have suggestions as to how to get these images to upload to iPhoto? Thanks so much.

    k2k
    Welcome to the Apple user to user assistance forums
    1 - try image capture (in your applications folder)
    2 - mount the camera to the desktop and see if you can download the photos using the finder
    3 - if that does not find them then use media recover - http://www.mediarecover.com/ - the trial version will tell you what it can recover before you purchase
    4 - in the future it is recommended that you never have iPhoto (or any other computer program) delete your photos - always import your photos (using a card reader is better in many people's opinion) and properly disconnect your camera, test them in iPhoto and then use your camera to format the card hereby deleting the photos and reformatting the card
    LN

  • Will my previously sync'd Flickr photos (from iPhoto) get removed from Flickr

    Hi,
    I am very nervous of using the new Photos App and losing all my previously sync'd Flickr Photos that I configured from iPhoto - some of them have thousands of views / comments and fav's that I would hate to lose.
    My photo library has been migrated to Photos App now, so I presume that as long as I don't fire up iPhoto again, I should be fine - as once the photos are sync'd to Flickr from iPhoto then as long as iPhoto doesn't try and remove them it should be fine and it can't do that if you don't start it up.
    My concern is what happens when I try and share a photo to Flickr from the new Photos App - is this going to reset all my photos that have been previously shared to Flickr (and hence lose the previously uploaded ones from iPhoto) or will it just share additional photos as a new individual photos? It seems whereas iPhoto ran a complex Sync type relationship with Flickr, the Photos App Sharing to Flickr is much more basic.
    Can anyone put my mind at rest because I would be mortified to end up losing my Flickr Photos?
    Rgds
    Gary

    My concern is what happens when I try and share a photo to Flickr from the new Photos App - is this going to reset all my photos that have been previously shared to Flickr
    It hasn't for me.

  • How do I edit my photos in iphoto? I want to straighten photos and remove some of the dead area.

    how do I edit my photos in iphoto? Specifically,I want to straighten photos and remove some of the dead (blank) area around the photos.

    tlhunnewell wrote:
    how do I edit my photos in iphoto? Specifically,I want to straighten photos and remove some of the dead (blank) area around the photos.
    First off it would be good to learn how to use iPhoto - editing is one of the most basic operations - what version of iPhoto do you have? Have you watched the videos and looked in Help?
    In general you select the photo can click edit - to straighten you use the "Straighten tool" - to remove areas around the photo you use the "crop tool"
    LN

  • IPhoto Conversion ModileMe + TWO Flickr Accounts

    Two quick questions.
    I just migrated over from iPhoto and I noticed that there does not appear to be an indication on my folders that I have published albums to Flickr or to MobileMe (as there was in my iPhoto Album).
    I put a lot of time into getting these set up and can anyone assure me that this is idiot proof and I am unlikely to screw anything up? Do I simply try and publish something to MobileMe and just login with my account info?
    Also, I have two Flickr accounts and I am constantly getting confused with this. Is there a way to publish an Album to one account as opposed to the other and vice versa? I mean, say it is linked to one of my Flickr Accounts but I want to publish to the other one.
    Anyone know how to handle this?
    Thanks (newbie).

    Hi Ernie. Thank you. I just downloaded FlickrExport for Aperture for a couple of bucks and look forward to testing it out. I think it seems to handle metadata very nicely when linked to Flickr which is nice.
    Can I please ask you what this looks like on your end from a mechanical perspective? I mean, you have a bunch of different Albums for your different accounts and you drop images in there when you want them to link to that account?
    How did you get them to go to the different Facebook accounts? I guess you just entered this once (for each?) when  you published it initially somewhere or did you just change the /global/ settings somewhere publish, change settings again, publish next Album etc?
    Thanks.

  • Error enabling photo stream "iphoto was unable to connect to Photo Stream"

    Whenever I try to enable Photo Stream, it times out after awhile, and I get the following error: "iPhoto was unable to connect to Photo Stream." (see below [1]).  I "tcpdump" shows that the computer is trying to open connections to akamai (unrelated?) but not apple.  I am using iPhoto 9.2 build 626.
    There is one oddity in this scenario : I have one iCloud account that I am trying to use between three computers.  I was able to register iPhoto on my mac book pro, but it is failing on my second.
    thanks in advance,
    -tom
    08:26:35.984082 STP 802.1d, Config, Flags [none], bridge-id 8000.98:fc:11:54:7a:9e.8002, length 35
    08:26:37.417858 ARP, Request who-has dd-wrt (Broadcast) tell 192.168.6.122, length 46
    08:26:38.032082 STP 802.1d, Config, Flags [none], bridge-id 8000.98:fc:11:54:7a:9e.8002, length 35
    08:26:39.977873 STP 802.1d, Config, Flags [none], bridge-id 8000.98:fc:11:54:7a:9e.8002, length 35
    08:26:42.025748 STP 802.1d, Config, Flags [none], bridge-id 8000.98:fc:11:54:7a:9e.8002, length 35
    08:26:42.435600 ARP, Request who-has dd-wrt (Broadcast) tell 192.168.6.122, length 46
    08:26:43.971461 STP 802.1d, Config, Flags [none], bridge-id 8000.98:fc:11:54:7a:9e.8002, length 35
    08:26:46.019515 STP 802.1d, Config, Flags [none], bridge-id 8000.98:fc:11:54:7a:9e.8002, length 35
    08:26:47.453197 ARP, Request who-has dd-wrt (Broadcast) tell 192.168.6.122, length 46
    08:26:47.965198 STP 802.1d, Config, Flags [none], bridge-id 8000.98:fc:11:54:7a:9e.8002, length 35
    08:26:49.606268 IP 192.168.6.122.filenet-rmi > 239.255.255.250.ssdp: UDP, length 339
    08:26:49.708805 IP 192.168.6.122.filenet-rmi > 239.255.255.250.ssdp: UDP, length 348
    08:26:49.811498 IP 192.168.6.122.filenet-rmi > 239.255.255.250.ssdp: UDP, length 379
    08:26:49.914098 IP 192.168.6.122.filenet-rmi > 239.255.255.250.ssdp: UDP, length 405
    08:26:50.016310 IP 192.168.6.122.filenet-rmi > 239.255.255.250.ssdp: UDP, length 401
    08:26:50.017171 STP 802.1d, Config, Flags [none], bridge-id 8000.98:fc:11:54:7a:9e.8002, length 35
    08:26:50.118847 IP 192.168.6.122.filenet-rmi > 239.255.255.250.ssdp: UDP, length 401
    08:26:50.221214 IP 192.168.6.122.filenet-rmi > 239.255.255.250.ssdp: UDP, length 393
    08:26:51.958833 STP 802.1d, Config, Flags [none], bridge-id 8000.98:fc:11:54:7a:9e.8002, length 35
    08:26:52.368490 ARP, Request who-has dd-wrt (Broadcast) tell 192.168.6.122, length 46
    08:26:54.006909 STP 802.1d, Config, Flags [none], bridge-id 8000.98:fc:11:54:7a:9e.8002, length 35
    08:26:55.004001 IP susans-pc.52389 > a173-223-237-54.deploy.akamaitechnologies.com.https: Flags [.], seq 187854:189302, ack 103254, win 65535, options [nop,nop,TS val 1073825952 ecr 2280611493], length 1448
    08:26:55.004213 IP susans-pc.52389 > a173-223-237-54.deploy.akamaitechnologies.com.https: Flags [.], seq 189302:190750, ack 103254, win 65535, options [nop,nop,TS val 1073825952 ecr 2280611493], length 1448
    08:26:55.004264 IP susans-pc.52389 > a173-223-237-54.deploy.akamaitechnologies.com.https: Flags [P.], seq 190750:191283, ack 103254, win 65535, options [nop,nop,TS val 1073825952 ecr 2280611493], length 533
    08:26:55.004415 IP susans-pc.52389 > a173-223-237-54.deploy.akamaitechnologies.com.https: Flags [P.], seq 191283:191688, ack 103254, win 65535, options [nop,nop,TS val 1073825952 ecr 2280611493], length 405
    08:26:55.035678 IP a173-223-237-54.deploy.akamaitechnologies.com.https > susans-pc.52389: Flags [.], ack 189302, win 4116, options [nop,nop,TS val 2280641050 ecr 1073825952], length 0
    08:26:55.053470 IP a173-223-237-54.deploy.akamaitechnologies.com.https > susans-pc.52389: Flags [.], ack 190750, win 4116, options [nop,nop,TS val 2280641068 ecr 1073825952], length 0
    08:26:55.060158 IP a173-223-237-54.deploy.akamaitechnologies.com.https > susans-pc.52389: Flags [.], ack 191283, win 4116, options [nop,nop,TS val 2280641074 ecr 1073825952], length 0
    08:26:55.066460 IP a173-223-237-54.deploy.akamaitechnologies.com.https > susans-pc.52389: Flags [.], ack 191688, win 4116, options [nop,nop,TS val 2280641081 ecr 1073825952], length 0
    08:26:55.209380 IP a173-223-237-54.deploy.akamaitechnologies.com.https > susans-pc.52389: Flags [P.], seq 103254:103691, ack 191688, win 4116, options [nop,nop,TS val 2280641223 ecr 1073825952], length 437
    08:26:55.209522 IP susans-pc.52389 > a173-223-237-54.deploy.akamaitechnologies.com.https: Flags [.], ack 103691, win 65535, options [nop,nop,TS val 1073826154 ecr 2280641223], length 0
    08:26:55.952463 STP 802.1d, Config, Flags [none], bridge-id 8000.98:fc:11:54:7a:9e.8002, length 35
    08:26:57.386190 ARP, Request who-has dd-wrt (Broadcast) tell 192.168.6.122, length 46

    Good catch, nifmus.  I'm kicking myself for not checking system.log earlier!   I have very similar messages in mine.
    By any chance is your Library folder (or part of it) relocated to a separate disk?  Or your entire home folder?  I have part of my Library folder on a SSD for speed, but my home folder and some of the larger Library subdirectories are on a regular disk because they wouldn't fit on the small SSD.  It's all tied together with symbolic links, and without problems... until Photo Stream came along and didn't like it.
    I knew that sandboxd was involved somehow, but your post prompted me to focus on it.  It's definitely the problem here.  I found the following sandbox profile file inside the iPhoto application bundle:
    /Applications/iPhoto.app/Contents/Library/LoginItems/PhotoStreamAgent.app/Conten ts/Resources/PhotoStreamAgent.sb
    Inside this file are a bunch of definitions to control what PhotoStreamAgent is allowed to do.  There are a bunch of lines under an allow-file-write* declaration which should allow PhotoStreamAgent to write to the above files listed in your log.  Lines such as:
           (home-regex #"/Library/Application Support/iLifeAssetManagement")
           (home-regex #"/Library/Preferences/com\.apple\.iLifeAssetManagement\.crash\.plist(\.[^/]+)? $")
    And many others.  In my case, I suspect that the problem may be related to the fact that the final absolute path of those files may differ from what you'd get if you just substituted my home directory in for "home-regex" since I have stuff relocated around.  Although since I was able to get it working with a blank home directory, also put in place via a symbolic link (so the final path differs), I'm not 100% sure of this.
    What I do know right now is that there is a quick "hack" that fixed it for me.  I don't like the hack and would strongly recommend against it, because it's likely to break the next time there's a software update for iPhoto.  But it works until I can find a permanent solution.
    To make it work, I edited the above file and changed the second line from "(deny default)" to "(allow default)".  This, of course, defeats the whole purpose of the sandbox by allowing PhotoStreamAgent to do anything it wants, but it also allows stuff that is really supposed to be allowed but fails anyway for us.
    If you want to try this, it helps to be familiar with the unix underpinnings of OS X.  There's probably a way to do it in the normal graphical user interface, but as a longtime unix guy, I just jumped to the command line and did a "sudo vi (that long filename)".  To do it via the gui method, you'll have to navigate to that folder in Finder (quickest way is to hit Cmd-Shift-G and copy/paste the path, or right-click iPhoto and "Show Package Contents", then drill down to the file), edit the file, save a copy (because you don't have permission to modify it), then copy the new version over the old (it will ask for an admin password).
    Again, I don't recommend this because it's likely to break in the future and defeats the security that Apple intended with the sandbox, but it's a quick fix.  I'll continue to investigate as I have time, trying to find out precisely what's causing the failure with the default sandbox profile.

  • IPhoto '09 version 8.1.2:  If I permanently delete the photos in IPhoto trash, will the same duplicate photos be deleted from the Events library?

    For IPhoto '09, version 8.1.2:  If I permanently delete the photos from the IPhoto trash, will any of the duplicate photos in the IPhoto library also be deleted?

    1. There are no duplicates in iPhoto unless you imported two or more copies of the same photo
    2. If you are useing the defaults in iPhoto and delete a photo from an event and empty the iPhoto trash and the system trash all versions of the photo will be gone
    LN

  • I imported some photos to iPhoto from my iPhone.  After it was done, I said it could delete the photos.  iPhoto quit unexpectedly and now the photos aren't on my iPhone or iPhoto.  Help!

    These were pictures of my honemoon and I'm desperate to get them back!

    All I am trying to do is find something on a forum board or article etc stating that the the date showing in iphoto could be the date it was imported or synced or sent to me and not the actual date taken.
    The date on the photo could be anything because you can edit the date with iPhoto or any of 100 apps, free and paid for. So, the date on the photo will prove nothing, I'm afraid.
    Regards
    TD

  • In imovie how do I seperate all my videos from the photos from iphoto? I have thousands of photos so finding the odd video here or there is like finding a needle in a haystack! Is there a way I can simply import the videos rather than all the photos

    Imovies - how do I seperate the videos from the photos. My library has bundled them all together from iphoto

    One way I was able to do this, was to make a Smart Album in iPhoto, with the rule of showing just the movie files.  This will work, once you know what format the movie files are in.
    In iPhoto, select one of your movies, and right click it.  Look for the option: "Reveal in Finder" or "Show in Finder" (this depends on the version of iPhoto).
    Once you see the file, look for the three letters AFTER the period.  Like this:
    .mov (QuickTime movie)
    .avi  (Uncompressed Windows Video)
    .mpg (MPEG video)
    Back in iPhoto, when you make your Smart Album, set it up like this:
    Once you have it set like this, press RETURN (or click "Ok").
    What you'll see is all the videos that have that file extension (.mov, .avi, .mpg, etc.) listed.  Now the nice thing is this:  Every new movie you add to iPhoto will automatically get listed here, regardless of where in iPhoto they live!
    Integration with iMovie:
    By making this album in iPhoto, when you get to iMovie, you'll be able to see the movies when you select your Videos Smart Album.
    I hope this helps you out.  They have iPhoto and iMovie workshops at Apple Stores that cover this too.  They're free, and you can learn a lot.
    Sincerely,
    Brian K. James

  • We add information to our photos in Iphoto on one  laptop, when the photos go via Icloud to the other laptop, the information does not transfer. Is it possible to get the information to transfer with the photos?

    We add information, eg , name of peron in photo and information about where it was taken,  to our photos on one laptop, when they go via the Photostream to our other laptop the information is not transferred. Can this information be transferred, we do not want to have to enter it again on the second computer.

    Welcome to the Apple Community.
    No, only the photo is added to photo stream, your tags etc, are specific to iPhoto. If you want to share more than the photo use shared streams and add comments.

  • Viewing photo in iPhoto and it jumps to another photo

    I am unable to select and view a specific photo. When selecting a photo to view in "Library", the selected photo briefly appears and then another random photo replaces it.

    Go to the Home screen and double click the Home button. That will reveal the row of recently used apps at the bottom of the screen. Tap and hold on the app in question until it wiggles and displays a minus sign. Tap the minus sign to actually quit the app. Then tap anywhere on the screen above that bottom row to return the screen to normal. Then restart the app and see if it works normally.
    In this instance iPhoto for iOS is the app in question. Then reboot your iPad. Press and hold the Home and Sleep buttons simultaneously ignoring the red slider until the Apple logo appears. Let go of the buttons and let the iPad restart. See if that fixes your problem.

  • How do I import RAW photos into iPhoto?  I cannot import RAW photos from my Olympus EPL-2 camera.  I am using iPhoto 7.1.5.

    I cannot import RAW photos from my Olympus EPL-2 camera.  I am using iPhoto 7.1.5.  I read that iPhoto has to update their system and add each camera to be able to import RAW photos from it.  If this is true, how can I let Apple know to add my camera.  Thanks in advance.

    The Raw from every model of camera is different. Note: that's every model not every brand. So, the NEF produced by a Nikon D40 is not the same as the NEF produced by a D60, the CR2 produced by a Canon 350 is not the same as the CR2 produced by a Canon 400.
    Therefore the Raw for every camera model needs to be added individually. If yours is not supported then let them know you want it:
    iPhoto menu -> Provide iPhoto Feedback
    When support is added I also expect that you'll need iPhoto 09 or 11.
    Regards
    TD

  • Unable to see photos in iphoto only  blank boxes where the photo's should be

    can anyone help , usually use the external drive to manage iphoto, for some reason now when i click on iphoto, only blank boxes appear and even when i eject the hard drive and open iphoto it thinks it has found the library with blank boxes . ???

    Remember we can't see your machine.
    There are 9 different versions of iPhoto and they run on seven different versions of the Operating System. The tricks and tips for dealing with issues vary from version to version and OS to OS. So before anyone can help, they need information to work with. Basic stuff:
    - What version of iPhoto.
    - What version of the Operating System.
    - Details. What were you doing when the problem arose?
    - Did it ever work properly?
    - Are there error messages?
    - What steps have you tried already to solve the issue.
    Anything else you can think of that might allow someone else to understand your issue.
    With this kind of information somebody can develop a starting point for troubleshooting the issue.

  • Why does iPhoto/Aperture keep deleting photo sets from my Flickr account or keep placing whole sets back into the Pending stage of uploading the photos. This is becoming very frustrating and extremely time consuming. Any help would be most welcome

    Has anyone got any idea as to why Iphoto/aperture keeps deleteing my photo sets from my Flickr account without warning or reason given. Also when I enter my sets the program will revert all of the photos back to the Pending stage of the up oading process. One or two photos I could live with but some of my set are in excess of 1500 photos per set, and this becomes very very time consuming to re upload them. and whats more annoying on some occassions after spending 12 to 16 hours re uploading them I find that they have all been duplicated. Is there a Bug with Iphoto or Aperture????????
    any help would be most welcome P Jefferys

    I am using Iphoto version 9.5.1, and No I am not deleting any photo from any file. what happens is this :- I open up Iphoto and enter my flickr account via the shared folder icon on the left hand side of the screen this is when I get a pop up screen from Iphoto informing me that they have removed a SET of photos from my Flickr account (no reason given) when i go into that set all I can see is dashed empty square where the photo used to be. I will then get another pop up screen saying that Iphoto can no longer access my flickr account and will I permit a reconnection and allow Iphoto to access my flickr account (add pass words etc) when I get back into flickr the SETS have gone and all other photos enter the Pending stage again. After re uploading the missing photos I find that some 50% of them have been duplicated.
    PJ

Maybe you are looking for

  • Question about host and local machine and applet

    hello, I have a question. I'm writing an applet program that will write a specific file in its working directory in the host machine. 1)How can i get the working directory of the applet? 2)How should i specify the path for writing on a file in the ap

  • Calling WD Java component in WD ABAP

    Hi Experts, I've a requirement to call WD Java application in my custom WD Abap component. In Ehp4 time management module, the time recording application is designed in WD java component while Ehp5 the same appln is designed in WD ABAP. Now I need to

  • MBA, Thunderbolt and firewire

    i am now the happy owner of a MBA 13" 94gb memory)...i cannot expouse how mush i love it.... but i use an 800 firewire drive foe work, i have several VM images on it and use VMware fusion. so heres the question; on my MBP (8gb memory) running the ima

  • EJB compiler Fatal Error ??

    Hi, I am building a web service. So first I started by building the entity beans, and testing each and every entity bean. At the first time when i generated the new test application clients it worked fine. When I wnat to test the same thing next day,

  • TS4036 i cloud backup required message frozen , cant switch off or anything !!

    My i pad has frozen with amessage that i-cloud backup need ing to be done.  Cannot switch off so don't know what to do.