Deleting Pictures in Edit Mode

When I am in Full Screen Edit Mode I don't seem to be able to delete an open picture simply by pressing the DEL button. The combination Command-Option-Delete works but not the Delete alone. A friend of mine can delete an open picture with just DEL button. Am I the only one with that problem? Are there settings to activate deleting picture in Full Screen Edit Mode with just DEL button? (I think the first time I run the program after installation the DEL button alone worked but I am not 100% sure)

I tried rebuilding just some minutes a go.
I am now revising my previous statement. When deleting photos in newly (in this session) created albums, album list is not updated until I select another album and then back again. However, image count of the album is updated.
Information pane is never updated, unless closed and opened.
And while writing this, iPhoto came to a dead stop in the background.
Tomas

Similar Messages

Deleting photos in edit mode

I've no issues with iPhoto 08 other than when deleting photos
I always delete in edit mode (Apple-Backspace) and with all previous versions it would simply move to the next picture after deletion
With 08, as soon as I delete a photo, it moves right back to the first picture in the event or library
I've searched threads & the web but can't find any mention of this - am I missing something obvious?
Thanks
Dom

I tried rebuilding just some minutes a go.
I am now revising my previous statement. When deleting photos in newly (in this session) created albums, album list is not updated until I select another album and then back again. However, image count of the album is updated.
Information pane is never updated, unless closed and opened.
And while writing this, iPhoto came to a dead stop in the background.
Tomas

How to delete objects in edit mode but in previous session?

Hi,
While editing a communication channel power went off and the next time when I try to edit the same I get the error communication channel is being edited by user zzz.
Because of this I am unable to activate the standard change list for other objects also.
I don't see any existing sessions in SM12.
Please let me know how to resolve this.
Best Regards
Bhargavi

Hi,
From the URL http://<hostname>:<portnumber>/rep/start/index.jsp
Go to Administration>Under Directory Tab>Administration of locks and caches-->Lock Overview
Remove the lock for that particular the userid.
Regards,
Sridhar

Deleted Items Stay in Edit mode?

When Adding Items to a portal, for instance an Image... and then I want to delete that image... I can delete it so the image no longer shows on the finished page, but the Item still shows in the Edit mode. How do I delete the Item so it no longer shows in Item mode

Assuming that you are using 10g: 
Yes, you can disable this feature. Click on Properties of the Page Group that you want to disable this feature. Go to the third tab Items. 
On this tab you will see 2 options : 
Retain Deleted Items 
Display Unpublished, Expired, and Deleted Items In Edit Mode 
Either enable or disable based on your preferences.

I'm using Adobe Acrobat with the hope of editing a url on the graphic...a simple 3-letter change, save, close and send for printing..how do I get in edit mode to delete 3 letters and insert 3 new letters?

?I'm using Adobe Acrobat with the hope of editing a url on the graphic...a simple 3-letter change, save, close and send for printing..how do I get in edit mode to delete 3 letters and insert 3 new letters?

pkg4ibm wrote:
editing a url on the graphic...
Not sure what you mean by that: is that URL in an image, or is it actual text?
If it is in an image, then you need to extract the image, edit it with something like Photoshop, then add it back to the PDF.
If the URL is actual text, I suggest that you remove the entire URL, then add the corrected link.

DMS: Documents opened in edit mode(CV02N) are not deleted from Temp Folder

Hi All,
My query is whenever i edit documents like word,pdf or autocad files in cv02n, it make a copy in my c/windows/temp folder but doesnot delete them when it close the transaction. i have given PC data carrier with path as %Temp% & in profiles i have defined the path as c/windows/temp/
So is there any solution by which the files opened in the edit mode will be deleted when i close the transaction or else after some specified time it should get deleted from the temp folder. Is there any standard configration for it.
Note: I have tried the 741388 note but it is only for display mode documents.
Regards
Nishant.

Hi Nishant,
unfortunately this is the standard behavior as for editing the application need a
temporary file and this file is still stored after closing the application to enable a re-checkin in the future too.
So the only possibility is to delete the temporary files from C:\Windows\Temp after some time manually. There is no functionality in the system standard as the SAP system has no control on the windows folders.
To achieve a very similar behavior you can set the "Delete after checkin" flag in transaction DC30 for this applications and see if this will meet your requirements.
This flag means that the original file gets deleted after you check them into a storage category. Maybe this could be usefull.
Best regards,
Christoph

Remove insert replace delete options from abap editor in EDIT mode

hi ,
i am facing a strange problem. when i change to edit mode the code remains as display format and there are buttons in the toolbar to insert,delete, modify .
it puts a tag *{ insert
like this when i press insert button.
i want to do normal editing. How to ressolve it.
this is a Z-program and editor lock is unchecked.
please help me.

this is because you are trying to change a progarm that is not the orignal in that system, in which you are trying to make changes.
for such program Original system is different from the system in which you are trying to modify it. You can also check it from object directory entry.
To edit such type of program please follow the below procedure.
GOTO T-CODE SE03
Under the node *Object Directory choose change object directory entries and click on execute icon or double click on it.
now check the check box R3TR PROG and give the program name in the input area and click on execute icon
now double click on program name and change the original system and give the name of system in which you are tyring to make changes in that program.
I have applied this solution many times and this will also work for you.

[iPhone SDK] - UITableViewCell - Set edit mode to delete automatically?

Hi,
I'm having a hard time trying to understand how to set edit mode to delete automatically for all cells in a table view, like in the Weather app for example (in the app settings).
I tried using - (UITableViewCellEditingStyle)tableView:(UITableView *)tableView editingStyleForRowAtIndexPath:(NSIndexPath *)indexPath, but it never gets called.
Anyone can help?
Thanks!

First of all, the following method tells the table that which cell is editable;
- (BOOL)tableView:(UITableView *)tableView canEditRowAtIndexPath:(NSIndexPath *)indexPath
you can return TRUE or FALSE depending upon the indexPath.
Then the following method will tell about the editing style;
- (UITableViewCellEditingStyle)tableView:(UITableView *)tableView editingStyleForRowAtIndexPath:(NSIndexPath *)indexPath
In which you may return UITableViewCellEditingStyleDelete .

Can't view photos in edit mode

Hello,
I just upgraded to iPhoto '08, and while I can view all my thumbnails ok, the photos themselves won't load at all in edit mode.
I was using iPhoto to try to"jumpstart" my iWeb (per my other help request in another topic) when I noticed this.
I have Leopard 10.5.2, iPhoto 7.1.2 and a 1.8 GHz processor and 512 MB RAM in my upgraded G4 tower. I tried deleting the preferences file, rebuilding the library file, opening in another account, etc, with no luck. I had even just erased my hard drive and cleanly re-installed Leopard, etc. with still the same problems in both apps. Do I just need to add more memory perhaps? I can't think of anything else...?Does Leopard require much more memory than Panther (which I had before) to run properly?
Thanks,
Paul

I've had the what sounds like the exact same problem with iPhoto '08. I, too, have an upgraded 1.8 GHz G4 (AGP Graphics) running OS 10.5.3 (although the original installation was 10.5.1 and the same problem occurred before the software updates). When I try to edit a photo, the edit window opens but no picture appears. Clicking on the various editing tools and manipulating them (blindly, on a blank screen) shows that editing is actually taking place, and that changes can be saved.
An earlier post of mine concerned the first problem I noticed since my OS and processor updates; namely, that the DVD player app won't work, but instead returns an error message saying that a valid device could not be found for playback. Several responses to that post seemed to suggest that the ATI Rage 128 video card might be the culprit and that it would need to be replaced. In the past week I've been on the phone or in email contact with tech support people at ATI, Sonnet, Other World Computing, and Apple, the last being the least knowledgeable of all of them, I'm sorry to say.
The Sonnet guy personally runs a computer just like mine, but with the ATI Radeon 9800 Pro Mac video card. That item costs $209 at OWC. But ATI says it won't work because of the G4's 200 power supply.
These folks think that the iPhoto problem would be solved by the new video card -- but I'm not yet convinced I want to spend that kind of money to find out. Most also say that the DVD Player issue would be fixed, although the OWC guy says it has nothing to do with it.
So we're going blind here, with much conflicting expert opinion. I'll keep watching for further discussion.
cc

Why is the photo only black in Edit mode with iPhoto 11?

Why is the photo only Black in Edit mode?
Everything works fine, except when I try to edit a photo, it shows as only Black.
I have tried every fix talked about on this forum, and some others - nothing fixes it.
Is this a Feature ? or is it a bug that no one is interesteed in fixing? It doesn't fill me with confidence in Apple when I see such random little glitches remaining unfixed.

Is it the same for newly created slideshows? Although a long shot give this a try:
1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your
User/Home/Library/ Preferences folder.
2 - delete iPhoto's cache file, Cache.db, that is located in your
User/Home/Library/Caches/com.apple.iPhoto folder (Snow Leopard and Earlier).
or with Lion and Mt. Lion from the User/Library/Containers/com.apple.iPhoto/
Data/Library/Caches/com.apple.iPhoto folder
3 - launch iPhoto and try again.
NOTE 1: If you're moved your library from its default location in your Home/Pictures folder you will have to point iPhoto to its new location when you next open iPhoto by holding down the Option key when launching iPhoto. You'll also have to reset the iPhoto's various preferences.
NOTE 2: In Lion and Mountain Lion the Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and hit the Enter button - 10.7: Un-hide the User Library folder.
If the above fails as a test launch iPhoto with the Option key held down and create a new, test library. Import some photos and test to see if the same problem persists. Does it?
If it doesn't then the following my be your next step:
Starting over from scratch with new library
Start over with a new library and import the Originals (iPhoto 09 and earlier) or the Masters (iPhoto 11) folder from your original library as follows:
1. Open the library package like this.
2. Launch iPhoto with the Option key held down and, when asked, select the option to create a new library.
3. Drag the subfolders of the Originals (iPhoto 09 and earlier) or the Masters (iPhoto 11) folder from the open iPhoto Library package into the open iPhoto window a few at a time.
This will create a new library with the same Events (but not necessarily the same Event names) as the original library but will not keep the metadata, albums, books slideshows and other projects.
Note: your current library will be left untouched for further attempts at a fix if so desired.

Blank photo on CD-R and lost edit mode - thumbnails only

I tried to save photos on a CD-R and got blank picture frames on the CD in the correct amount and landscape/portrait format along with correct data in the description. The photos transferred remain in the library as thumbnails only and cannot go to edit or slide show mode, nor can they be exported. How can I restore edit mode and how can I burn a CD-R?
iMacG5 Mac OS X (10.3.9)

If you know any of the file names and can't find them anywhere on the HD via a the Finder search then they've probably been deleted from the HD. If you've got backups of them on some other media, you can copy them back in.
You didn't move those photos to some other location within the iPhoto Library folder via the finder did you? On the chance that they are somewhere in that folder you could try the following:
1 - make a duplicate copy of your iPhoto Library folder (select it and type Command-D)
2 - launch iPhoto with the Command+Option keys depressed and follow the instructions to rebuild the library. Select all of the options including the one regarding orphaned files.
If that finds those missing files and gets them back into your library (although they will probably be lumped into one recovery roll and album) you can then get rid of the original library folder. Just make sure all are accounted for in the new library. Good luck.
If you know any of the file names and can't find them anywhere on the HD via a the Finder search then they've probably been deleted from the HD. If you've got backups of them on some other media, you can copy them back in.
You didn't move those photos to some other location within the iPhoto Library folder via the finder did you? On the chance that they are somewhere in that folder you could try the following:
1 - make a duplicate copy of your iPhoto Library folder (select it and type Command-D)
2 - launch iPhoto with the Command+Option keys depressed and follow the instructions to rebuild the library. Select all of the options including the one regarding orphaned files.
If that finds those missing files and gets them back into your library (although they will probably be lumped into one recovery roll and album) you can then get rid of the original library folder. Just make sure all are accounted for in the new library. Good luck.

Photos show up in edit mode but not in published site

I am using iweb 09 and paste 20 photos into a tempate and they show up in edit mode fine. When I publish the site locally all the photos are missing. What can I do to fix that?

Welcome to the Apple Discussions. On the premise that it's a damaged library that's causing the problem make a temporary, duplicate copy of the library and try the two fixes below in order as needed:
Fix #1
1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your Home/Library/Preferences folder.
NOTE: If you're moved your library from its default location in your Home/Pictures folder you will have to point iPhoto to its new location when you next open iPhoto by holding the the Option key. You'll also have to reset the iPhoto's various preferences.
2 - delete iPhoto's cache files that are located in the Home/Library/Caches/com.apple.iPhoto folder.
Fix #2
Launch iPhoto with the Command+Option keys depressed and follow the instructions to rebuild the library. Select last three options.
Click to view full size

Can't open photos in edit mode

I can;t open photos in edit mode in iPhoto '08. When I double click on a photo the main window remains blank (no "!" no"?"). This problem occurs with every photo in the library. My permissions are OK. I've also tried setting the preferences to edit in Photoshop but double clicking on the photos then still accomplishes nothing.

Steve:
Do you get a blank white window in the edit mode? If so that may mean you do not have access to the files. Try the following:download and run BatChmod on the iPhoto Library folder with the settings shown here, putting your administrator login name, long or short, in the owner and group sections. You can either type in the path to the folder or just drag the folder into that field.
FYI:
Using Photoshop (or Photoshop Elements) as Your Editor of Choice in iPhoto.
1 - select Photoshop as your editor of choice in iPhoto's General Preference Section's under the "Edit photo:" menu.
2 - double click on the thumbnail in iPhoto to open it in Photoshop. When you're finished editing click on the Save button. If you immediately get the JPEG Options window make your selection (Baseline standard seems to be the most compatible jpeg format) and click on the OK button. Your done.
3 - however, if you get the navigation window that indicates that PS wants to save it as a PS formatted file. You'll need to either select JPEG from the menu and save (top image) or click on the desktop in the Navigation window (bottom image) and save it to the desktop for importing as a new photo.
This method will let iPhoto know that the photo has been editied and will update the thumbnail file to reflect the edit..
If you want to use both iPhoto's editing mode and PS without having to go back and forth to the Preference pane, once you've selected PS as your editor of choice, reset the Preferences back to "Open in main window". That will let you either edit in iPhoto (double click on the thumbnail) or in PS (Control-click on the thumbnail and seledt "Edit in external editor" in the Contextual menu). This way you get the best of both worlds
Do you Twango?
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've written an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 08 libraries. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

Cannot open VI file in edit mode.

I cannot open a VI project that I was working on. Every time I try to open the file it gives me a message that "not enough memory to complete this operation".
This is a large project and I need to be able to access the block diagram.
This happens when I try to open it in edit mode.
Thanks.
Message Edited by Minguccio on 01-06-2006 11:41 AM

Minguccio,
I've done some poking around and may have found some useful information. This error will ocurr if you have too many (and I mean a ton) of controls on the front panel. I haven't heard of this error since LabVIEW 5.1 though and we've upgraded the number of controls you can have on your front panel since then. However, try deleting some controls from your front panel to see if this helps out.
My investigation also lead me to tcp errors. Are you using tcp\ip anywhere in your programming? I found this discussion that may help out if that's the case.
Let us know what you find.
Best Regards,
Chris C
Applications Engineering
National Instruments
Chris Cilino
National Instruments
LabVIEW Product Marketing Manager
Certified LabVIEW Architect

ChaRM Allowing Multiple Users in the Same CD to be in Edit Mode

We have upgraded to ChaRM 7.1 but are still using CRMD_ORDER and Transaction Monitor CRM_DNO_MONITOR. When the Developer completes her change, populates the Current Processor with the Change Manager and clicks Save she keeps the CD open in Edit Mode. The Change Manager is able to open the same CD and click Edit without any warning on the bottom of the window saying it is being processed by another user.
When there is a hand off to the next Current Processor, both the previous and current user are able to be in edit mode. I don't recall this being allowed before. Has this changed with 7.1?

DGS wrote:
I have a global temp table (GTT) defined with 'on commit preserve rows'. This table is accessed via a web page using ASP.NET. The application was designed so that every one that accessed the web page could only see their data in the GTT.
We have just realized that the GTT doesn't appear to be empty as new web users use the application. I believe it has something to do with how ASP is connecting to the database. I only see one entry in the V$SESSION view even when multiple users are using the web page. I believe this single V$SESSION entry is causing only one GTT to be available at a time. Each user is inserting into / selecting out of the same GTT and their results are wrong.
I'm the back end Oracle developer at this place and I'm having difficulty translating this issue to the front end ASP team. When this web page is accessed, I need it to start a new session, not reuse an existing session. I want to keep the same connection, but just start a new session... Now I'm losing it.. Like I said, I'm the back end guy and all this web/connection/pooling front end stuff is magic to me.
The GTT isn't going to work unless we get new sessions. How do we do this?
Thanks!You may want to try changing your GTT to 'ON COMMIT DELETE ROWS' and have the .Net app use a transaction object.
We had a similar problem and I found help in the following thread:
Re: Global temp table problem w/ODP?
All the best.

Deleting Pictures in Edit Mode

Similar Messages

Maybe you are looking for