Deleting Plural Eyes extension from Premiere Pro CS6

Hello,
Months ago I was running a trial version of Plural Eyes Software and through Adobe Extension Manager, I installed it into my Premiere Pro CS6. Well, that trial is now over and I want to get rid of the option of using it in my PrP CS6 but I don't know how to do that. I tried to do that through Adobe Extension Manager but remove extension is greyed out.

Hi Maurice,
Extension Manager didn't find your "Plural Eyes" extension( the extension list in the right panel is empty ), so you cannot remove it. Did you install this extension by Extension Manager? Was there any warning/error dialog popped up? After this extnesion was installed, did you remove some files( like .zxp, .mxi ) from your file system? When the extension was installed, did you launch Extension Manager to check if it was showed in the extension list in the right panel?
Anyway, you can install this extension again, and check if it can be listed in Extension Manager. If yes, then you can remove it from Extension Manager. If no, let us know. Thanks.
Xiaoyi

Similar Messages

Audio not transferring to Encore from Premiere Pro CS6

I'm trying to export a sequence through the Adobe Dynamic Link from Premiere Pro CS6 to Encore and the audio is not transferring with video. The video is 30 minutes long with multiple video and audio tracks. The video came through fine, but no audio track. However, I also brought a timeline into the project that was less than 3 minutes and the audio track came with it. Any suggestions/help much appreciated! Thank you!

Yes--that is correct. Audio track in Premiere but no audio track present in Encore. I believe the audio format in Premiere is Stereo. It is HD footage shot on a C-100 camera. The sound was recorded into the camera and all brought in together. I did end up doing the work around that was suggested and just exported an MPEG2-DVD and pulled the audio in manually. But, would love to try to figure out how to make it work directly using Adobe Dynamic Link. Any suggestions are greatly appreciated!

Audio and video not synchronized when exporting from Premiere Pro CS6

Hi
We have made a project in Adobe Premiere Pro CS6 that´s intended to be exported to DVD (it´s a weeding). We are working with NTSC DV Widescreen. The exporting is 720x480
We have 2 audio lines activated and sounding on this project.
The question is:
When exporting the entire video (the entire timeline sequece) using Adobe Media Encoder to formats like H.264 (NTSC DV Widescreen)... Quick Tile Movie or AVI without compression (we tested these formats) the 2 audio channels get unsynchronized from the video. The same problem occurs if we get a direct link of the timeline from Premiere to Encore.
And Inside Premiere Preview audio is preety correct.
Does anyone here are getting such problem?
Also..can I ask another question (as I´m not expert on video production)?. What´s the best format for our purpose? Export a video to be played to DVD (we record weedings, birthdays..social events). No problem the time to export. We´d like the best quality for output.
Thank you for the help
Gustavo.

Hi John and techkid123
We have 4 cameras here. 1 is Sony model HD1000 (since it works with Mini-DV cassete we need to capture the image via Firewire). 2 cameras are Sony HD2000 (it generates *.MPEG files if I remember well). And 1 camera is a Panasonic AG-DVC7 (it generates *.MTS files)
We start a new project using the Standard NTSC Widescreen 48Khz format. When we drag to the timeline for example the MTS file...Premiere ask us if we want to Keep and Change timeline to suit the file specification. Anyway we always have 1 or 2 camera files that has a yellow line over timeline.
But I renders correct...no problem to edit...and we had no problem with Premiere CS5.5 :/
We are downloading the latest update of Premiere. I´ll make some test and publish here if the problem persist.
Thank you a lot for the help
Gustavo.

Encore CS6 crashes when importing from Premiere Pro CS6

When sending a project to Encore as a Dynamic Link from Premiere Pro, Encore hangs then a message pops up that it has stopped responding then closes. How do we get this to work?
The computer has an Intel Core i7 processor, 16GB of RAM and is running Windows 7 Pro x64 with Service Pack 1. Adobe CS6 Master Collection is installed. The computer is joined to a Windows Server 2012 domain and the user of the machine has local administrator rights.
The Adobe suite has been uninstalled and re-installed multiple times without success. Sometimes after re-installing, sending a Dynamic Link to Encore will import as expected once, but then after restarting the computer, the problem will occur again. This has been tried with and without installing any Adobe updates. The system has also been wiped and had Windows and all software clean installed on it again which has not resolved the problem.

More below... may not help, but does say that the programs are not designed to work on a network, and may not
Some? versions of Premiere do not work properly, if at all, over a network
-see messages #1 and #3 in http://forums.adobe.com/thread/771151
-you MUST give all users administrator accounts to use Premiere
-and especially Encore dual layer http://forums.adobe.com/thread/969395
-a work around, of sorts http://forums.adobe.com/thread/957523
-and not on a "domain" http://forums.adobe.com/thread/858977
-http://helpx.adobe.com/premiere-pro/kb/networks-removable-media-dva.html

Migrate from Premiere Pro CS6 to Premiere Pro CC Installation

I am a Creative Cloud subscriber. When I initially downloaded Adobe Premiere Pro, I downloaded CS6. I know nothing about the program as I am a Final Cut Pro X user but I installed it so that I can start learning the software but have only just gotten around to finding the time to start learning it. However, I would like to install the CC version but want to know the best steps to take in order to do this? I downloaded the CCCleaner tool to resolve a different issue but can I use to uninstall Premiere Pro CS6 and then just download the CC version or do I need to do something else? I had not really started using the program so I don't have any preferences or anything that I need to retain. Thanks.

Do NOT uninstall Premiere Pro CS6 until you read all of these links!
CS6 is the final Encore http://www.adobe.com/products/encore/faq.html
-also http://helpx.adobe.com/encore/kb/encore-cs6-installed-cc.html
-http://tv.adobe.com/watch/davtechtable/using-premiere-pro-cc-encore-cs6-for-bluray-dvd-and -interactive-video-for-ipadatv-and-mobile-hd/
Also, The tutorial list in message #3 http://forums.adobe.com/message/2276578 may help, with more help in message #5

How to transfer and use the project files from Premiere Pro cs6 MAC OS to Premiere Pro CS6 Windows

Is there any plugin or tool that can help me to transfer my project files along data edited on adobe premiere cs6 MAC OS to the adobe premiere pro cs 6 on windows PC

When transferring a project from one computer to another,to stop errors such as these, its essential to ensure that the project is copied with all the files and folders in exactly the same locations. Also before opening the project on the new computer, you need to set up a new project and set all the preferences to be exactly the same as on the first computer. Then when you open the project, premiere will find all the files in all the right places. Even then you may need to re-link some files. Just follow the prompts when Premiere asks "Where is file...."
We use USB hard drives to store students projects on and they are used on many different computers without problems, as the preferences are all set to be the same.

Exporting multiple audio channels from Premiere Pro CS6 in MXF OP1a

I have a Premiere Pro project with multiple audio channels and I want to export them as individual channels in a MXF-file.
Method:
When I created a new sequence I choose "Multichannel" from the "Tracks" page. When I export the MXF OP1a, I choose 8 channels from the "Audio" page. I make sure that none of the channels are muted.
Result:
The rendered file contains 8 channels as I want it to, but only the first two channels contains audio (main left + right), the rest of the channels are empty. Channel 1 and 2 contains the audio from all channels, but I want the channels to be seperated in the same way as they are layered in Premiere.
Any ideas what I can do?
Thank you for your help!

Hey Guys,
I'm having problems exporting an 8 channel audio mxf for a broadcast client. The mix they want is as follows:
Track 01: Full Programme Mix L
Track 02: Full Programme Mix R
Track 03: International Sound L
Track 04: International Sound R
Track 05: Music and Effects L
Track 06: Music and Effects R
Track 07: VO Mono
Track 08: Interview Mono
I have setup the sequence following this video on vimeo and am fairly confident I have the sequence settings correct. https://vimeo.com/38501157
I also can export a multichannel mxf. But all my tracks are exported as mono and I am therefore not maintaining my L and R as set up in my sequence
The problem is on exporting that since Tracks 01 and 02 are bounced down to 1 + 2 it means that my Track 01 (Panned L) is getting bounced down onto my Track 02 aswell and thus it does not remain seperate. Has anyone delivered a similar format for a broadcaster and come across this problem with Premiere Pro and know a solution?
Any help would be much appreciated
Thanks
Eamonn

Why is video size different to original when exporting from Premiere Pro CS6 to Encore?

Hi there
My source files in Premiere Pro are 1920 x 1080.
When I export the sequence to Encore to burn to a DVD the size in the burned DVD changes to 720 x 576
In Encore project area I have these two entries
The encoding settings for the above two entries are
this (for the first entry above)...
and this (for the second entry above)...
It does not seem to be possible to change the encoding to 1920 x 1080 for the first enry and as such the video is being burned as 720x576.
How can I fix this? What am I doing wrong?

DVD is 720x576 you cannot change that.
If you want 1920x1080 which is HD you need to make a BluRay.
You can however make an AVCHD disk which is HD on DVD.
About 20 minutes will fit on a DVD and will only (but not all) BluRay players.

Exporting DPX Sequence from Premiere Pro CS6

I edited a .mov premiere sequence from my 7D and 5D MK II in SpeedGrade by using the "send to adobe speedgrade" option. I exported the grade as a .dpx sequence and brought it back into premiere. Now when I try to export it in h.264 "for youtube hd 1920x1080 23.976", I get a huge loss in color range and blacks become so pixelated and I even lose a lot of darkness in the blacks. The grade no longer looks good. The preview monitor looks great in premiere but it does not match the final export. I need help with this one!
Software: Production Premium CS6
Footage: 1920x1080 / 23.976fps
Camera: Canon 7D + 5D MKII
System Specs:
W7 Professional 64-bit
i7 930 (stock)
Gigabyte X58A-UD3R
12gb G.skill Pi Series 1333mhz
EVGA GTX 470 SC
180gb Corsair Force GT SSD (boot)
1TB WD Caviar Black (production premium program files)
2TB Seagate Barracuda (speedgrade .dpx files)
750gb Seagate Barracuda (source footage/scratch disks + cache)

Use the MPEG2-DVD preset
CS5-thru-CC PPro/Encore tutorial list http://forums.adobe.com/thread/1448923 may help

MP4 exported from Premiere Pro CS6 runs choppy on some computers . . .

I have a video clip that was rendered as a .mov file in AfterFX CS6. I uploaded it to youtube exported as a 1080p HD MP4 (target bitrate 12, max bitrate 12, VBR, 2-pass) that runs OK on my computer at any resolution, and runs OK on my iPad and 47" TV, but runs choppy on my laptop, and a friend's computer. My computer is a Dell running a Haswell i7, with 24GB of memory and an Nvidia Quadro 2000 video card. My iPad is Gen 4, my laptop is a Lenovo with i5 cpu and 4GB ram, and my friend is running a first generation i7 920 (overclocked) with 12GB of ram. On my computer and iPad, http://youtu.be/lMg-YsVMZHg runs smoothly at any resolution, and the same file runs smoothly on my 47" LED TV from a USB 2 thumb drive. It runs choppy and stutters on my laptop and my friend's machine at even low res. The same file runs a lot smoother with some very slight judder when plugging the thumb drive directly into my laptop and running full screen. What suggestions do you have? Is this a bitrate problem, and what should work with all machines?
Thanks.
Gary Silverstein

The tutorials are downloaded as a zip file then extracted; I don't actually screen record the tutorials while streaming or anything. I guess I couldn't say if variable frame rate was used when they recorded the tutorials, but the media I have shows up as 30fps as opposed to some sort of non-traditional frame rate that often shows up when recording with something at a variable frame rate (like the stock iPhone video camera app).

Problems exporting from premiere pro cs6

Heeeeeeeeeeeeelp please!
I downloaded my recent project from cs5.5 into a trial version of cs6 and now I'm getting an unknown error (problems compelling video) when I try to export my project (in H.264).
I tried shutting off the auto safe, exporting in a different format (quicktime), restarting offcause, removing effects from the clip where the export failes, even tried exporting without that particular clip, but then it just happened another place in the film at another clip.
I'm thinking there could be an export limit when you're only working with the trial, cause I have been able to export smaller bits of the timeline and as well other smaller projects. I'm a mac user and not that good at computers in general.
I can still export a early version of my project from cs5.5 but I would really love to detect the problem in stead of starting all over since it's my BA project and I'm on a deadline...
I really hope somebody know something helpfull

I been in this same situation for two weeks. First update your software to the latest update. Just released yesterday
I believe you have more than one clip. At the end and begining of the clip you should have little grey triangle shape. They are called handles, meaning extra space at end point and at begining. Usaually for transition. If you dont see it on both clips (as in picture) then the one clip which is misiing need to be trimed little or more until handles disappear or some time you see full triangle (as in picture). Do same if there are more. Then just try to export the ending where clips attach each other. Set in and out points as I did in the picture. Export and make sure to choose sequence in and out setting. here is the picture:
I hope it works. I dont use this software anymore. I had a trail version. Used for two weeks. Every day same problem then finally figured it out and moved back to Edius 6. Thanks

Error when exporting from premiere pro CS6

I have been using PP CS6 since launch date- and have had none stop problems with exporting, I cant dynamic link, add to render ques or simply export straight from PP!
When i Que my project it will export up until half way and then freeze, i've tried changing the clip, removing effects, everything!
has anyone encounted this problem before?
This is happening with more then just this one project aswell.
These are old projects that were originally created in CS5, could that be causing it?

Thats what i thought!
All earlier projects open, i can edit, manipulate it! do the works! However when it comes to export time! i can't export it to anything! whats the point?!?!
Im really angry, when you pay for something you expect it to do what it was designed to do! and the fact i can't export at all is really really frustrating!

Media Encoder doesn't recognize custom export settings from Premiere Pro CS6

When I use export media in Pr CS6 and use custom settings (H.264) and click Queue when it arrives in Media Encoder none of the custom settings are there, instead it always defaults to .F4V.
Here is a screenshot of custom settings in Pr CS6:
And here is what happens in Media Encoder:
Thanks for your help!
Nick

So, it looks like Media Encoder is stuck in a trial version? The only formats available are indeed .f4v, .flv, .mp3 & h.264. Is a reinstall of Media Encoder the fix?

Premiere Pro CS6 for Broadcast ProRes HQ Frame rate issues

I switched from Avid to work on a quick project with DSLR footage shot on the 5D Mark III at 29.97 psf which is not to be confused with 29.97i, a standard frame rate necessary for broadcast. So the commercial spot was cut together, I punched in the proper settings (the very same settings that work with Avid 6.0+ and Final Cut Pro 7), and hit export. When exporting either a Quicktime Animation or Pro Res file from Premiere Pro CS6, premiere creates a file with a faulty framerate, it comes out as 28.4 instead of 29.97. I thought I was going crazy, but no, there are tons of documented experiences with 23.94 being 20-something, and on an on. It seems as if Adobe did not do a good enough job with integrating the Pro Res codec into their software. The only way I could get around it was to export to something else (Blu-ray H.264 at 29.97), and then re-encode that file to Pro Res HQ with either compressor or adobe media encoder. The problem lies in exporting progressive footage as interlaced, it just completely screws up the frame rate. The worst bit is that, I need Pro Res HQ for the distribution house for the commercial spots, they require the ProRes HQ MOV at 29.97i and if anything is off, I get charged for it.
Does anyone else have problems with Adobe Premiere lacking on the professional end? Or similar experience with this problem?
Just do a search for pro res frame rate issue premiere and you will see a lot of other users with the same issue.
Thanks,
C
System Config:
Mac OSX 10.8.2
2.7GHz Intel Core i7 MacBook Pro 15" Mid 2012
NVIDIA GeForce GT 650M 1024MB
16GB 1600 MHZ DDR3
256GB SSD + 750GB SATA (no CD/DVD)
Premiere Pro CS6 (latest)

Read the Warning here: http://ppbm7.com/index.php/tweakers-page/85-raid-or-not-to-raid

Problems exporting mpeg 2 videos using Premiere Pro CS6 and Media Encoder

Using a Mac, I'm trying to exporting an mpeg 2 video from Premiere Pro CS6 using the queue process that opens the Media Encoder but when the process begins, it freezes and doesn't end.

Using a Mac, I'm trying to exporting an mpeg 2 video from Premiere Pro CS6 using the queue process that opens the Media Encoder but when the process begins, it freezes and doesn't end.

Deleting Plural Eyes extension from Premiere Pro CS6

Similar Messages

Maybe you are looking for