Deleting read source file

can we delete the read source file once it is successfully transferred to target location?

Hi,
Yes u can do that by using API OdiFileDelete. Please follow the document for further info.
Thanks,
G

Similar Messages

Whenever i try to download a rather large file i continue to get the "could not read source file" error. Tried new profile, uninstalling and looking for the compreg.dat file to delete nothing is working. Please help

whenever i try to download a rather large file i continue to get the "could not read source file" error. Tried new profile, uninstalling and looking for the compreg.dat file to delete nothing is working. Please help

Did you reinstall CS3 after CC?
For that matter, doing an in-place upgrade on the OS is always a gamble with Adobe programs. Reinstalling all the versions you need, in order, would probably solve your problem.
And you shouldn't need to save as IDML after opening the .inx in CC.

Need to read source file without deleting it - Sender SFTP adapter

Dear friends,
The data from the source file needs to be read by PI on a daily basis. The file should not be deleted.
Vendor updates the file on a daily basis with file name DataFeed.xml
How to acheive this in Sender SFTP adapter ?
Kindly guide me
Renu

Hi Renu,
Unfortunately as of latest release of SFTP adapter. Arching is not possible :(. really dont know why :).
as a work around what you can do is create a scenario as 1 sender and 2 reicever.
here: 1 sender: will be the sender fileadapter which will pick the file from souce.
1st receiver: will be a receiver file channel which will palce back the file in the source Archive folder.
2ed Receiver: this will be the actual receiver to which the data has to be given.
Or write a Module in Sender adapter which will archive the files in new location.
Note: Here i am assuming that each time the source creates a new file with same name which contains new data in it everytime.
Regards,
Senthilprakash.

Sender File adapter not deleting the source file after reading

Hi everyone,
In the sender Communication channel i have choosen the "Delete" option after reading the source file. But it is reading the file, but it is not deleting the file. I have checked the file status. it is with full persmission.
can anyone give solution to this.
Thanx
Bala

Hi,
1. set the mode to delete
2. make sure the file is "deletable"
3. check xiserver:port/MessagingSystem/monitor log to see what happens with the file
(chec both audit and log in that link)
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions">XI / PI FAQ - Frequently Asked Questions</a>

How can i relink files to the timeline sequence when i've deleted the source file path? All the attribute are still in the timeline, I just can't relink

So i started an edit and had the whole thing finished and ready to export in Final Cut X, when i went to export I had a message pop up say that it couldn't export while FCP X is still referencing media. I went through trying to solve the problem and ended up deleting the source media folders in the Final Cut Events folder and reimporting the clips. This lead to a whole can of worms opening up and now i'm left with a whole edit with 90% of the clips in the timeline unable to relink to source media.
Can anyone help?

First find the files. Then File>Relink Event Files and point to the folder.

Firefox gives a can't read source file message when downloading

I have tried to download and install the Opera browser and other .exe files (because Firefox is not working correctly, as witnessed by this message). First, I have to pause and restart the downloads many times; second, after the download is apparently complete, I get the "source file could not be read". I don't know whether it is related, but pages rarely complete opening and require that I stop the loading process.
I clicked to add troubleshooting information and couldn't do it. Connection failure with Mozilla.
?????

Did you check your security software?
Boot the computer in Windows Safe mode with network support (press F8 on the boot screen) as a test to see if that helps.
*http://www.bleepingcomputer.com/tutorials/how-to-start-windows-in-safe-mode/
Do a malware check with several malware scanning programs on the Windows computer.
Please scan with all programs because each program detects different malware.
All these programs have free versions.
Make sure that you update each program to get the latest version of their databases before doing a scan.
*Malwarebytes' Anti-Malware: http://www.malwarebytes.org/mbam.php
*AdwCleaner: http://www.bleepingcomputer.com/download/adwcleaner/ http://www.softpedia.com/get/Antivirus/Removal-Tools/AdwCleaner.shtml
*SuperAntispyware: http://www.superantispyware.com/
*Microsoft Safety Scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx
*Windows Defender: http://windows.microsoft.com/en-us/windows/using-defender
*Spybot Search & Destroy: http://www.safer-networking.org/en/index.html
*Kasperky Free Security Scan: http://www.kaspersky.com/security-scan
You can also do a check for a rootkit infection with TDSSKiller.
*Anti-rootkit utility TDSSKiller: http://support.kaspersky.com/5350?el=88446
See also:
*"Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked
*https://support.mozilla.org/kb/troubleshoot-firefox-issues-caused-malware

Deleting A source / file

On the side bar under the sources there are several folders categorized by year (ie. 2004, 2005, etc. ) All our photos are located in the 2007 file. How in the world do I delete these other files? They contain no photos, I press delete and it makes the error noise, I cannot drag it to the trash. Can I get rid of these?

DkJacobo
Welcome to the Apple Discussions.
No you can't get rid of these. They are Smart Albums hardwired into version 6. You can click on the wee triangle to the left of the word Library and they won't be visible anymore.
Regards
TD

Deleting Updates source files

I am in the process of changing the Software update groups and Deployment packages. I am removing all the old Groups and packages, however I noticed that despite deleting the group and the package, the source files are still on the HDD. Is
there a process I need to go through to delete these? Since the Group and packages have been deleted, can I just delete the folder? I want to Create a new Deployment package, and re-download the updates, but I don't want to have the update residing
on the HDD in two places.

(Package) source files will not be deleted automatically - so you have to remove them manually (or scripted).
Torsten Meringer | http://www.mssccmfaq.de

AME deleted my source files...

After fixing some problems with a compilation of videos I have I sent the corrected files to Encoder to export them.
After an obnoxious goat sound encouder force quit itself and my original source files are gone, not in the trash not even in .PRV folder and when I open the project up it says my media is offline and can not be located.
The files quite literally evaporated. Unfortuanley these WERE my back up files an now all of my work is gone.
I need to figure out why AME shut itself down and what the hell happened to my files.
running CC

Were you using Watch folders at all? If not, can you please give us the exact steps you took to queue the files (ie. were you queuing them directly from PPro, dragging and dropping them to AME, importing your sequences directly in AME)
I have yet to run in to a case where AME removes source files from the system. Let's see if we can't get to the bottom of where things went sideways.

Need to read source file without deleting it!

Hi,
I have a scenario where
1. I need to pick the latest file from source folder without deleting it.
2. I need to post the data in to EP's KM. (how can I communicate with EP)
So can any put some light as how to achieve this.
Regards,
shiva.

Ideally, Source application should not modify same file. It should create new file so that you can archive old file.
Are you using FTP/NFS? FCC???
Have you tried option "Msecs to Wait Before Modification Check"?
I m not sure if its useful for you, but just check if it works.
[http://help.sap.com/saphelp_nwpi711/helpdata/en/44/70ec8a20453abee10000000a155369/frameset.htm]
-Gouri

HT1492 Start-up disk is full and can't go past the blue screen; can't delete read-only files on single-user mode. Please help.

I have had my Mac mini for about 6 years and I guess it had enough of me (haha), so the start-up disk got full and it shut down before I could empty files on my drive. Unfortunately, all these years I hadn't backed up anything and now I can't access anything since it won't boot past the apple logo (and the blue screen for that matter). I have tried rebooting (holding shift as the mac mini loads), but that didn't help since the start-up disk will still be full and stuck on the blue screen. I am now trying the single-user mode (holding command key+s), and I tried to delete files in the trash bin but all of the files are read-only and access is denied! so I basically can't delete anything on the mac mini (it says "Root device is mounted read-only"). So the key here is to change the permissions but I don't know how to exactly do that. Can someone help me figure this out? (and type the command in the unix language please!!) [ Note: We have two users on this mac mini if that helps.]

Run the following command:
mount -uw /
This isn't a permissions issue.
(87807)

Want to delete the source file from the ext Hard drive using iphoto11

I am testing using the external hard drive and turn off "copy items to the iphoto library", I put the iphoto library remain in the osx system disk. In case I forget to turn on the HD, iphoto still work.
But the problem that I have is that I have no way to delete the file that I do not want, within iphoto event, they are deleted, but the real thing is still in the folder of my ext HD.
Is there any better way to manage this, I have 500G of photos from another HD that I want to move into iphoto to manage it, but if I cannot has a easy way to delete the unwanted photos, I have no way to use it.
if I turn on "copy items to the iphoto library, would the library be as big as 300-500G, my macbook only has a HD of 60G only, what is the best way to do this?
any suggestion welcome.
thanks.

You have choosen to use a referenced library by choosing to uncheck the "copy imported items to the iPhoto library" - This is strongly not recommended as it makes importing more difficult, deleting more difficult as you are finding and replacing defective hardware or upgrading much harder - what you are seeing is that deleting is now a two step process - that is wha you have choosen - iPhoto only acts on the photos inside it's library - you have choosen to take care of the originals outside of the iPhoto library and you also have choosen to never change their path
If you are looking ot save space on yoru internal drive a much better way is to move your iPhoto library to the external drive -
Moving the iPhoto library is safe and simple - quit iPhoto and drag the iPhoto library intact as a single entity to the external drive - depress the option key and launch iPhoto using the "select library" option to point to the new location on the external drive - fully test it and then trash the old library on the internal drive (test one more time prior to emptying the trash)
And be sure that the External drive is formatted Mac OS extended (journaled) (iPhoto does not work with drives with other formats) and that it is always available prior to launching iPhoto
And backup soon and often - having your iPhoto library on an external drive is not a backup and if you are using Time Machine you need to check and be sure that TM is backing up your external drive
This of cousre will break the path to the photos that you have imported while this option was unchecked
LN

PDF deletes source file

In some instances when creating a PDF from an original TIF file, the TIF file is deleted. I would like to retain the source file. Is this a setting? I am using Acrobat 9 Pro.

How are you creating the PDF? What OS? It is not typical for Acrobat to delete the source file in such cases.

How to delete a local file in the presentation server.

Hi All,
How to delete a local file in the presentation server. As we do using 'delete dataset dsn' in application server. How can i achieve this. My requirement is after uploading file using gui_upload, i want to delete that source file. Please let me know, how can i achieve this.
Thanks in advance.
Regards,
Vishal

data: l_rc type i.
data: f_name type string.
 move 'c:\YourFile.txt' to f_name.
 CALL METHOD CL_GUI_FRONTEND_SERVICES=>FILE_DELETE
 EXPORTING
 FILENAME = f_name
 CHANGING
 RC = l_rc
 EXCEPTIONS
 FILE_DELETE_FAILED = 1
 CNTL_ERROR = 2
 ERROR_NO_GUI = 3
 FILE_NOT_FOUND = 4
 ACCESS_DENIED = 5
 UNKNOWN_ERROR = 6
 NOT_SUPPORTED_BY_GUI = 7
 WRONG_PARAMETER = 8
 others = 9
 IF SY-SUBRC <> 0.
 MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
 ENDIF.

Self-contained movie asking for source files

I have exported a final cut pro movie as a self-contained file, and after I deleted the source files, as my harddrive was jammed full, I am unable to burn the project onto a dvd. The file won't open in quicktime or final cut pro. It keeps asking for a source file to continue - HELP! It was a two hour movie that I am to be burning for XMas, and it has slipped out of my computer apparently. It was opening on its own without my harddrive connected before I deleted the source files, so I KNOW it was self-contained which is the only reason I deleted the files in the first place! Thoughts would be greatly appreciated.

This is not a new problem. I have encountered it through many versions of QuickTime.
Typically, it happens after I assemble a compilation of clips from various sources, including imported Windows Media files. I diligently check the "Save as a self-contained movie" option, which always indicates a file size larger than the "Save as reference movie" option -- for example, 1.7 MB vs. only 9.2 KB for a short clip. And yet, if I have discarded the original clip, QuickTime is unable to play some of the supposedly self-contained movies because it can't find the deleted source files. It's kind of maddening, especially when there's no way to recover the original clips.
I haven't tracked this, but I suspect it might happen when a clip in one format is pasted into a movie without first converting it to QuickTime. Has anyone else noticed this possibility and tested it?

Deleting read source file

Similar Messages

Maybe you are looking for