Deleting red delta packet in PSA

Hello,
Today morning, I had a red delta packet in PSA, I deleted it, and executed Delta infopackage again.
It gave me a warning that, this will request again the same delta packet. So I guess, there is no loss data from delta. Can you confirm it?
My collegue said that, I shall check ROOSPRMSC from R3 and, I should change status of delta packet from red (back to technical status) to red (status NOT OK).
What is the logic of the operation my collegue said?

Hi,
  Whenever a delta infopacakge fails then its advisable to make the technical status red manually by going to monitor and making the status RED. But in your case since you said that you got a warning to repeat the delta then there should be no problem. But in future just remember to make the status red manually as always we need to make be sure that no issues are faced.
alos i would sugest you to be a bit cautious before you repat the infopackage becasue in case if even one delta is missed then you wil need to take lot of efforts in correcting the data. Some checks before repeat delta:
1) Try to anlyze why the error was faced
2) Check whether the job was cancelled or over in the source system.
3) Check the status of job in BW system, even if it is red then make the technical status red manually in montior.
4) Repeat the delta.
Check the below thread for more soem good info on repeat delta :
Repeat of Delta
In you case you waont face any problem becasue you got a message to request the last data again. The reason for it was that your job was terminated in R/3 as well as BW.
Thanks

Similar Messages

  • PSA deletion in delta

    Rohit pls let me know on this.
    If I delete the PSA in delta load on ODS will it be any impact. Will the load get failed If I delete the delta PSA(ODS).
    Message was edited by: Tamkris Taj

    Hi Tamkris,
    Is it like only rohit needs to update on this or shall i go forward?
    Once you have loaded the ODS, the PSA deletion should not create any problems. only incase you want to reconstruct some request, then it will be not possible as the records will not be available in PSA.
    Regards
    Sriram

  • Request data again from delta queue to PSA , but error

    Hi,expert
    I extract 1 record from delta queue to PSA,it is success, and then I set request to 'Red' in the PSA monitor, and delete that request,and start infopackage again ,
    then 1 delta record was loaded, so, it is success.
    but,
    when I repeat the upon operate(set request to 'red',and request data again), the system then alert below error:
    Last delta update is not yet completed Therefore,
    no new delta update is possible You can start the request again if the last delta request is red or green in the monitor (QM activity)
    why?
    Edited by: xuehui li on Apr 27, 2010 1:44 PM

    Hi ,
    If your last delta was red only then system will ask to repeat the same request it is called Repeat Delta,
    if you make your request Green then you won't get the message because this then assume that your last delta was successful ,
    But if you don't want to loose your data in DELTA process, then you must do Repeat Delta ,
    if you have very less data in your ODS and you are not sure about what is updated then
    you may delete all the data from ODS and delete the INIT request and initialise the load again.
    Let me know if you have any doubt,
    Cheers,
    Sukhi

  • DELETE A DELTA REQUEST THAT WAS COMPRESSED !!

    Dear Experts,
    I've some inconsistent data that i'm trying to address.
    So, I've delted a few requests out of ODS_1  >> which sends delta's to CUBE_1.
    After that I went to manage for CUBE_1 and deleted couple of those common requests from CUBE_1.
    Except one request XXXXXX for 11/1/05. When i'm trying to delte this request it says "This request has been aggregated, compressed or Scheduled".
    It said the same thing for the few of the previous req's that i deleted. But after few minutes, it allowed me to delete them successfully.
    This request is adamantly not going any further. So, I went ahead to the RSMO and changed the status from green to red on the STATUS tab. But it's still not letting me delete it.
    I'm concerned that about two things:
    1. how do i delete this delta request XXXXXX.
    2. If resend the data from datastage to ODS_1 from 11/1 to date, it'll then send delta's to CUBE_1.
    But the CUBE_1 already has this request XXXXXX for 11/1/05, it would create duplicate records. What would i do at that point.
    Please guide me thru this.
    Thank you,
    Ti
    Message was edited by: TI

    You need to check to see if the Request you are trying to delete has been compressed in the base cube. Once a Request is compressed in the base cube, you can not delete it.
    As Dinesh, mentions, the cause could also be that you have an agrregate that is set to automatically compress after the rollup, and you can not delete Requests from an aggregate that has been compressed either. Now if the Request has NOT been compressed in the base cube, and the problem is just due to the aggregate, then you can deactivate the aggregate, whihc should allow you to then delete the Request from the base cube.
    If the request has been compressed in the base cube, I think you really have only a couple of options -
    Reload the cube - might be the easiest if the cube is not to big.
    Selective Deletion might work if you can identify criteria that would only point to the data that had been loaded in that Request. Possible, but not likely - depends on the cube design and data.
    If you still have the data in the PSA you use that to create a flat file that you would reverse all the key figure signs and then load that to the cube from a flat file data source you define to offset the data from the Request that you can not backout.  Another variation would be to try to generate a similar reversing flat file from the source ODS. The PSA is probably a better approach if you have the data still there.
    So ...
    The first thing is to identify why you can not delete th Request - due to is compression in the base cube or compression in an aggregate.
    This is why you shouldn't compress Requests in the base cube until you have verfied the data.

  • How to delete the duplicate data  from PSA Table

    Dear All,
    How to delete the duplicate data  from PSA Table, I have the purchase cube and I am getting the data from Item data source.
    In PSA table, I found the some cancellation records for that particular records quantity  would be negative for the same record value would be positive.
    Due to this reason the quantity is updated to target but the values would summarized and got  the summarized value  of all normal and cancellation .
    Please let me know the solution how to delete the data while updating to the target.
    Thanks
    Regards,
    Sai

    Hi,
    in deleting the records in PSA table difficult and how many you will the delete.
    you can achieve the different ways.
    1. creating the DSO maintain the some key fields it will overwrite the based on key fields.
    2. you can write the ABAP logic deleting the duplicate records at info package level check with the your ABAPer.
    3.you can restrict the cancellation records at query level.
    Thanks,
    Phani.

  • How to delete the delta queue in the ECC

    Hi everyone!
    After I tryed to save a new Infopackage and I have the error :
    (Deltas already loaded for request REQU_41Q82WJLR9AZCE9ZMKQLVG3RG init. selection; no 2. init
    Message no. RSM1071
    Diagnosis
    Deltas have already been loaded for the init. selection of request REQU_41Q82WJLR9AZCE9ZMKQLVG3RG. A second initialization is therefore not possible with these selection conditions.
    Procedure
    If you want to carry out a new initialization, you have to choose selections that do not overlap.
    If you want to repeat the init. for the same selection, you have to delete the delta queue in the source system, and restart the delta process.
    As the error says - Deltas have already been loaded for the init. selection.
    Can you please give me some links/guids which describes how to  delete the delta queue in the source system, and restart the delta process.
    thank you, Ron

    Hi,
    Assuming as you need to the reinit for same selections.
    in such case you need to delete old init.
    how to delete init:
    Go to your info pack screen, menu Scheduler--> initialization options for source system--> here you can see the existing init, select init(green) and delete it.
    Later you can trigger your init info pack with selections.
    Thanks

  • Deletion of last request from PSA & Cube

    Hello Experts,
    I have one Z Infocube in which daily full data had been uploaded....Now in PSA, i have uploaded monthwise data via full load process. but for the current month i have to daily delete the request and then execute the process chain. Is there any method or process type which I can add into process chain that deletes the last date request and same for the DTP Request.
    Please help me out from this as i cant take full load daily.
    Thanks in advance
    Neha

    Hi,
    You can create a selective deletion program using the t-code DELETE_FACTS. Use this program in the process chain and provide variant to delete the previous request.
    PSA Data Deleteion:
    You can delete the request onderthan no.of Days.In the pC Process Types you will find option for Delete the PSA Data.
    Deleting Requests from the PSA :
    http://help.sap.com/saphelp_nw70/helpdata/en/b0/078f3b0e8d4762e10000000a11402f/frameset.htm
    ABAP to delete a specific request (last one) from a Cube  :
    ABAP to delete a specific request (last one) from a Cube
    Process Chain to Delete a previous request with overlapping values :
    /message/6161074#6161074 [original link is broken]
    Regards
    Ram.
    Edited by: Ramakanth Deepak Gandepalli on Dec 10, 2009 7:18 AM

  • How to delete logistic delta jobs on R3 side?

    Hello
    I would like to delete delta jobs (stop system to release these jobs) on R3 side.
    How I can do it?

    Hi
    if you are deleting the delta , the Init in the BW side will also be deleted.
    Follow the steps in case if you need to Delete the Setup tables and Fill it back
    1. Delete data in DSO/Cube
    2. Stop scheduled jobs for transfering data in R/3 side and BI check in SM37 and LBWE -> Job control
    3. Delete setup tables  using LBWG (based on the application component)
    4. Delete delta initialization for your InfoPackage in BI by using RSA1 -> Scheduler -> "Delete Initialization Options for Source System"
    5. Delete RFC queue with LBWQ
    6. Check queues that there is no data with RSA7 and LBWQ
    7. Run OLI*BW in background in your case  restricitons if required
    8. Start delta init InfoPackage in BI when job of initialization in R/3 is finished
    Santosh

  • How to delete multiple yellow request in PSA

    I am in BI7 and I have to delete the all the request present in PSA But in my PSA there are around more than 500 request which are in yellow status.Please suggest how to delete all the request in one go ,Since it very cumbersome to change status of every request to red and then delte it

    Hi,
    Debjani thanks for your reply,
    It helped me
    I have first deleted the contents from PSA table and
    then I have searched for request in RSTSODSREQUEST but this table does not contain that requests
    then i have got another  table RSREQDONE  whcih contains that request so I have deleted  request from that table.
    Final solution is
    Go to SE14 >> Give the PSA Table name >> delete it
    Then delete the requests from the table RSTSODSREQUEST/RSREQDONE

  • Deleted bad delta and former good deltas form data mart to targets(5)?

    Hi experts,
    My process chain failed in continues for 5 days due to DSO activation issue. On further analysis I found a bad request with status red on july 3rd and their is no psa to fix it.
    I deleted the bad request that is loaded on july 3rd with status red and all the god requests with status green on july 4th,5th,6th,7th and 8th.
    The data load is going from data mart to 5 different targets (3cubes and 2 DSO's) and i deleted the requests listed above with all the 5 targets.
    Know When I try to run new delta it is saying that 'new delta is not possible and asking for the previous deltas'
    What to do know? Should I delete the init and reinit with out data transfer and load my new delta? I am affraid that I may loose data if i do this.
    Thanks in advance.
    Sharat.

    Murali,
    I have the failed delta in the targets (3cubes and 2 ods). I deleted the bad delta and the former good ones after july 3rd from all the five targets by verifying the technical name of the requests in the targets.
    How should I proceed know?
    Can I do a full repair request and new delta? or delete the init and reinit without data transfer and do a full repair and a new delta?
    Please let me know. Thank you for your help.
    Sharat.

  • Deleting the data from the PSA

    Hi Experts,
    I have a case where I have to delete my PSA data,which is all about nearly two years data.
    Any idea on this highly appreciated.
    Regards,
    Srini.

    Yes, data in the PSA tables is periodically deleted to prevent it from getting bigger and bigger.
    It is a good idea to delete incorrect requests or deltas for a data target, to which you do not want to load any more delta.
    http://help.sap.com/saphelp_nw04/helpdata/en/b0/078f3b0e8d4762e10000000a11402f/frameset.htm
    pls reward me some points

  • How can I delete all delta request and init from InfoCube?

    Hi,
    We are working with an extractor that support deltas, but we are presenting problems with it, some changes in the data are not displayed. For this reason we are thinking change this type of processing and make a full load (with the full updating the changes are shown).
    For this reason we need to delete all requests of delta and its init. But in manage option of the infocube we can’t see the init and the first deltas.
    If I delete the initialization information at info package (menu option scheduler-> initialization). With this only we will delete the Initialization. I need to delete the data in the infocube.
    I would appreciate your help.
    Regards,
    Victoria

    Hi Victoria,
    You can either display all the requests in the manage tab and delete from there. Or you can use the Automatic Request Deletion option in the Data Target tab of the InfoPackage. See here for details:
    http://help.sap.com/saphelp_nw04/helpdata/en/80/1a65a8e07211d2acb80000e829fbfe/content.htm
    Hope this helps...

  • HT4519 how do i delete an email account? The one i want to delete is the only account that does not have a "delete" red bar??

    I have 6 email accounts on my iPhone 6 and want to delete one that is set up incorrectly. It is the only account that does not have the red DELETE bar...what do i need to do to delete it?
    It is hosted by GoDaddy, is this the problem?

    Thank you so very much! That was just what I needed to do, problem solved.

  • Delta load and PSA Reversal Indicator

    Background:
    After delta loading BW from R/3 Billing I noticed there were more records in the PSA than R/3 billing items. I found that some records had 3 duplicate records. The first was the orginal document from R/3. The second was the same with negative key figures and a reversal indicator. The third is the same record as the first. R/3 has only one record for these three.
    Question:
    1. Why was this record reversed in BW when there is no reversal in R/3?
    2. Will the first occurance of this record post to the  ODS load with the unique records option on?
    Thanks for any quick answers!
    New BW Analyst - Alan

    Hi dear and welcome on board !
    What you are seeing in PSA is the normal behaviour of Logistic Cockpit datasources...
    In this way, thanks to BW, you can analyze all the history for every single billing item (that, clearly, in R/3 will continue to have only one record in VBRP, with all latest and updated info).
    In other words R/3 reversal overwrited the unique record in VBRP, while BW stores this change !
    About your second question, you don't have to flag in ODS the "unique records" option, since, clearly, you will receive a lot of records for the same key !!!
    Hope now is clearer...
    Bye,
    Roberto
    ...and please don't forget to reward the answers...it's THE way to say thanks here !!!

  • Delete red button in grey

    Hello,
    I am trying to  delete a report where the red delete button is in grey colour.
    How else can we delete query.
    Regards,
    Atif

    Hi,
    Try T.code RSZDELETE to delete the queries which you dont want.
    Provide parameters like Type, InfoProvider, Technical Name, Last Changed By, Changed on, Last Used and execute.
    Thanks,
    JituK

Maybe you are looking for