Deleting SWCV from Integration Repository

Hi everyone.
I've imported some SWCV into 'integration repository'.
I've deleted this SWCV from SLD. I've refresh the cache.
The SWCV appear in the integration repository and i want to delete them.
How can i do this?
Thanks.

Just want to clarrify for anyone else...
You need to double click the SVCV to get it into your right frame of the Intergration Designer.
Then as suggested in that right frame - Click on Software Component Version > Delete. Delete will take place and it is permanent !.

Similar Messages

Deleting scenario from Integration Repository.

Dear All,
I was having one scenario in the Dev server which was having all the objects in it like namespace, DT, MT, MI, MM & IM. After testing now I want to delete the complete scenario from Repository. I have deleted all the objects like DT, MT, MI, MM & IM. But when I am deleting the namespace its giving me an error that delete the objects first. I am checking the objects and none of them is existing as I have already deleted them. I have even activated the scenario after deletion of the objects.
When I am deleting the namespace then its giving me an error that 2 objects are already exisitng and they will be deleted irrevocably.
Please guide me on how to delete the complete scenario fro IR.
Regards,
jain

Hi nishu,
First activate the two default data types(exchane ,log) thats created during any namespace creation and then try to delete the namespace...it should be deleted now...!!!
If u still face the problem!!!
click on the namespace and chek "where-used"..then u can see ...which objects are still associated with it....after deleting activate the changelist..then...delete the namespace!!!
regards
biplab

Deletion of SWCV in Integration Repository

Hi,
How do you delete incorrectly created SWCV from the Integration Repository ?
I can remove ok in the SLD but how do you then delete in the Integration Repository ?
I am using XI on Web AS 7.0
Any ideas ?
Kind regards
Colin.

Hi Colin,
Please take a look at this..
How to Delete multiple Software Component from repository
cheers,
Prashanth

How to delete/remove the software component from integration repository

Dear All
How to delete/remove the software component from integration repository which we have created some Data and message types.
Regards
Blue

Hi,
Follow the steps below to delete the Software component:
1. Delete the created Data Types, Message Types, Message Interfaces, Message Mappings, Interface Mappings and other imported objects like RFC's or IDoc's. Activate all changes.
2. Then delete the namespace and the default datatypes present with the namespace after checking "objects are modifiable".
3. Then delete the SW component, after placing the radio button in "Not permitted".
Regds,
Pinangshuk.

How to delete object in Integration Repository SAP PI 7.0

how to delete object in Integration Repository SAP PI 7.0

Hi Rashmi,
Right click on the object, you would find the option to delete--> select it. Goto Changelist Tab and activate the changes.
Ref: /people/siva.maranani/blog/2005/05/22/how-to-delete-software-component-from-integration-builder
Re: How to delete/remove the software component from integration repository
Thanks,

Problem in importing SWCV in Integration Repository

Hi All,
I am facing a problem while importing SWCV in Integration repository. it is throwing an error as
<b>Unable to read Software Component Version from the System Landscape Directory "XI1:50000"(SWC_IMPORT_PROCESS_EXCEPTION).</b>
Regards,
Chandu

Hi Chandrasekhar,
Have you configure SLD properly. to check this give the tcode 'sldcheck'. if it is not giving any error, u have to create 'lcr' rolesin j2ee UME and those roles to be maped to the users using j2ee visuval administrator. for more information check SLD configuration guide .
Regards
N.Amarnath

Regarding how download data from integration repository

Hi all:
Could u pls tell me how download data from integration repository, eg, download data types, mapping under a software component as a local file?
Thank u very much for any ur help

Hi jingying,
To download a TPZ file in ESR (Integration Repository), Go to Tools--> Export design objects
Step 1. (Select Source) Use the mode as Transport using File system & Check the checkbox for "Download File to Client"
Step 2. (Select Objects) In Object Set, choose according to your requirement, like Individual Objects to export only a data type or All Objects of Individual Namespaces etc.
Step 3. Click on finish Button
Step 4. Save the desired objects as a .tpz file on your local machine which can again be imported back on the ESR of any PI system.
Step 5. A pop-up "Export Successful" appears which confirms the export of the objects as a .tpz file. Click on Close button.
I hope this helps.
Regards, Gaurav.

SAP original SWCV in Integr.Repository

Hello,
this is a funny thing. XI 3.0 started with SP12
In Integr. Repository I have originally one SAP SWCV - SAP BASIS -> SAP BASIS 6.40 .
Here I am not able to import IDOC / RFC. The function is greyed out.
So I added the SWCV SAP BASIS -> SAP BASIS 6.20 . Here I can import IDOC / RFC.
Question: Is there a special reason for this behaviour?
What about changes when moving to next release after 6.40. Will then the BASIS 6.40 be active and the SWCV for the current next higher release be inactive for import?
If I import now from a SAP System on release 6.40 an RFC into the SWCV SAP BASIS 6.20 I will loose overview about release dependency of imported functions.
Any idea how to solve this, or is there a problem in my system?
Best regards
Dirk

I guess by default, if you import any SWCV from a file or any SAP pre-delivered integration content, the property "Objects are modifiable" is not checked (This property appears on right hand side bottom when double clicked on SWCV). Because of this it won't allow importing any RFCs.
When you said you added SAP BASIS 6.20, did you see any predelivered content along with it. If not, then by default, the option "Objects are modifiable" would have been checked allowing for addition of objects.
I guess any pre-delivered integration content will be non-modifiable.
Hope this helps.

How to create abapProxy in nw 7.01 not 7.1 from integration repository

i use nw 7.01 , it's sproxy inteface is different old and new ones like 7.1 so i couldnt create abap proxy in sproxy.I created an message interface in integration repository but i couldnt find any object releated to this in sproxy..
I found some documentation about 7.1 , it mentions that you must create a service interface in IR but in my version it doesnt exist.
so how to create or copy existing proxy class?
Thanks alot

I guess it should be similar to PI 7.0 environment wherein you have to create message interface in IR. Then use SPROXY transaction at R3 (not XI). From there you may select the interface and create proxy. For this make sure that abap proxy is activated at your R3 system.
Regards,
Prateek

Transfer Integration Scenario from Integration Repository

Hello,
I am in the process of setting up a 2004s PI system. I have gone thru the PI template installer in the NWA, applied note 939592 due to a central SLD and I am not stepping through the readiness check from note 817920. I am using version 3 of the check. I am running into an error at step 2.7. This is the step to test the connectivity between the Integration Directory and the Integration Repository. When I press the F4-Help for the Field name, the search results returns "No objects found!". I checked all the connections in the exchange profile and they all seem to be set properly. I then went to menu Tools -> Configuration Wizard. I received a popup stating "Cannot connect to Repository". The details are the following:
#22 11:32:10 [AWT-EventQueue-0] ERROR com.sap.aii.utilxi.swing.toolkit.ExceptionDialog: Throwable
Thrown:
MESSAGE ID: com.sap.aii.utilxi.misc.api.BaseRuntimeException
com.sap.aii.utilxi.misc.api.BaseRuntimeException: Cannot connect to Repository
     at com.sap.aii.ibdir.gui.scenario.wizard.core.WizardContext.checkRepository(WizardContext.java:65)
     at com.sap.aii.ibdir.gui.scenario.wizard.core.WizardContext.init(WizardContext.java:75)
     at com.sap.aii.ibdir.gui.scenario.wizard.core.WizardContext.setWizard(WizardContext.java:260)
     at com.sap.aii.ibdir.gui.scenario.wizard.ConfigurationWizardCommand.execute(ConfigurationWizardCommand.java:57)
     at com.sap.aii.utilxi.swing.framework.ExecutionContext.execute(ExecutionContext.java:196)
     at com.sap.aii.utilxi.swing.framework.ExecutionContext.executeSafe(ExecutionContext.java:134)
     at com.sap.aii.utilxi.swing.framework.CommandAction.actionPerformed(CommandAction.java:69)
     at javax.swing.AbstractButton.fireActionPerformed(Unknown Source)
     at javax.swing.AbstractButton$ForwardActionEvents.actionPerformed(Unknown Source)
     at javax.swing.DefaultButtonModel.fireActionPerformed(Unknown Source)
     at javax.swing.DefaultButtonModel.setPressed(Unknown Source)
I did see another message in the forum (Re: Integration scenarios from Integration Rep) that was very similar but the solution provided in there did not work for me.
Does anyone have any advice?
Thanks.
Regards,
Scott

Yes, I checked everything under the "Connections" section to make sure port, host name, user and passwords were correct. From what I can see, it is all correct. I also checked under the IntegrationBuilder and IntegrationServer sections to make sure the port, host, user and passwords are correct. From what I could see, it was all correct.
Thanks.
Regards,
Scott

Delete Document from SAPSCRIPT Repository

Hi all,
i want to delete a document from SAPscript Repository, i have only the document ID, what shall i do to handel this problem?
i have aslo used the FM BDS_DOCUMENT_DELETE but it says NOTHING_FOUND
is there a way to so?
BR

Hi BR,
Assuming that this is a valid requirement and that with document you mean FORM, I would check out include MSSCFF00 and then specifically the form delete_form. This shows the functions called when you manually delete the form via SE71 (i.e. DELETE_FORM).
Good luck,
Robert

Unable to generatre WSDL from integration repository

Dear All,
From Oracle R12 Integration Repository when i am clicking on GENERATE WSDL tab i am getting below error.
Service Provider Access resulted in exception 'oracle.apps.fnd.soa.util.SOAException: SystemError: Error while sending message to server. http://macoraotc02.maaden.com:8031/webservices/SOAProvider/EbizAuth?Generate=663&soa_ticket=lyZjtsJ4ghJ8oj7Va2-aiw..' when attempting to perform 'GENERATE'. Please view Service Provider logs for more details
Is there any issue with connectivity and from where i can see Service Provider logs please help.
Thanks,
Mihir

Ensure below steps has been performed correctly:
8. Enable ASADMIN user using the following steps:
1. Log on to Oracle E-Business Suite using sysadmin/sysadmin.
2. Select the User Management responsibility in the Navigator.
3. Click the Users link from the navigation menu to open the User Maintenance window.
4. Locate 'ASADMIN' user by entering information in the search area to retrieve the 'ASADMIN' user.
5. Click the Update icon next to the ASADMIN user to open the Update User window.
6. Remove the Active To date field and click Apply.
7. Click the Reset Password icon next to the ASADMIN user to open the Reset Password window.
8. Enter new password twice and click Submit.
9. After activating the ASADMIN user, verify if the ASADMIN user has the 'Apps Schema Connect Role' (UMX|APPS_SCHEMA_CONNECT) role in wf_user_roles.
If the 'Apps Schema Connect Role' role is not present in the wf_user_roles for the ASADMIN user, then run the 'Workflow Directory Services User/Role Validation' concurrent program to grant the role.
10. Reset the 'ASADMIN' password in the file system.
After 'ASADMIN' user is enabled from Oracle E-Business Suite, update the file
$INST_TOP/ora/10.1.3/j2ee/oafm/config/system-jazn-data.xml as shown below to reset the password:
<user>
<name>ASADMIN</name>
<display-name>Default Apps SOA User</display-name>
<description>Used by SOAProvider for DB connection</description>
<credentials>!<NEW PASSWORD></credentials>
</user>
Note: The password should be preceded by a '!' (Exclamation) so that when OAFM is started,
it gets encrypted. For example, if your password is 'welcome', then you should write it in the above file as "!welcome".
11. Bounce the middle tier.
If password in above file not matching what asadmin user password is setup in fnd_user, it will give that error.

Mass delete SWCVs from IR

Hi All,
is there any way to delete (infact mass delete) all the empty software component versions from IR.
We, by mistake, selected all while importing from SLD. and now the list of SWCVs in IR is very huge.
it is taking too much effort to select and delete each SWCV in IR individually.
I would like to delete all the swcvs which are empty, i.e. which dont contain any namespaces.
thanks,
Ganesh (g22sep)

Hi Joel,
I hope even if he re-imports , SWCV what he is having now and what he is going to re-import would be less , so it would override and leaving other the same as now.
rgds
srini

Can't delete Software Component in Integration Repository

Created Software Component,technical system, business system in SLD. Imported SC into IR (didn't create any scenarios/Dt/Mt/mi/etc yet).
Want to delete the Software Component and remove it from Integration Repository. Was able to delete in SC SLD, but cannot detemine how to delete in IR. The delete option is gray out. Any ideas..

Hi,
If you haven't activated it yet, then you can simply Reject Changes from the change list.
Otherwise, to delete SC you need to delete the SC Version (open for editing and choose "Delete SC version" from the menu). It is possible after you removed all namespaces and their objects.
The SC will be removed if it has no SC Versions in the IR.
Hope this helps.

Error while deleting events from the integration event queue

I am trying to delete all the events from the integration event queue after reading it, like this (this is in Java):
        IntegrationEventWS_DeleteEvents_Input input = new IntegrationEventWS_DeleteEvents_Input();
        input.setDateTime("");
        input.setLastEventId("");
        try {
             ((Default_Binding_IntegrationEventWS)onDemandStub).deleteEvents(input);
        } catch (Exception e) {
             log.error("Deleting events from integration queue failed: ", e);
        }Alas, I get the following error message:
Invalid method parameter(s): 'File Id'(SBL-ODS-50007)What does this mean? What is this mysterious "File Id" it supposedly gets? I don't see it anywhere in the SOAP message I'm sending and it isn't mentioned anywhere in the docs.
Thanks in advance for any input.

Dont keep this attributes null
input.setDateTime(""); //Put a Default Time way in
the past. Ex:"1/1/2000"
input.setLastEventId(""); //pass the eventIdThe documentation states that those two are optional (although they are not nillable, for some reason). I tried to set the date to today, but I got the same result. Since setting a date is supposed to delete all events older than that date, I don't think setting it in the past will delete anything.

Deleting SWCV from Integration Repository

Similar Messages

Maybe you are looking for