Deleting the data in the infocube will delete the data in explorer reports?

Hi,
I have some explorer reports based on the BW queries.
1. I have deleted the data in BW but when I go and check the data is still visible in the explorer reports ? Is there any option once I delete the data in BW the data should also be deleted in the explorer?
2. Once I transport these explorer reports from dev to Quality, if the quality system cube does not have the data then these explorer reports does not show up any data or else it carries the data as well from the devlopment system?
Regards
A

hi,
Explorer reports will take data from Indexes in BWA, so it will show data even if you delete the data from cubes.
you will have to index your queries/ cubes again if you need the latest data.
I guess this can be scheduled through process chains.
Regards, Mayur

Similar Messages

Does any one know if the iPhone camera one day will have the ability to date stamp photos taken with the iPhone

Does any one know if the iPhone camera one day will have the ability to date stamp photos taken with the iPhone

No one but Apple knows what will come in the future until they announce it. We are forbidden from speculating about it on these forums.

Photos won't import images from my Canon camera. When connected, program sees the images, tells me it will import the new ones, then freezes once import starts, not allowing any other operation to happen. MacbookPro 15" 2012, OSX Yosemite 10.10.3.

Photos won't import images from my Canon camera. When connected, program sees the images, tells me it will import the new ones, then freezes once import starts, not allowing any other operation to happen. MacbookPro 15" 2012, OSX Yosemite 10.10.3. Any suggestions?

Solution discovered. Faulty connector cable. Tried a different one and it worked.

I have Photoshop CS6, Windows 7, I have no entry at the accesscode. When i will write the code into the nummeric fields. I can write only numbers, but no letters. What can I do?

I have Photoshop CS6, Windows 7, I have no entry at the accesscode. When i will write the code into the nummeric fields. I can write only numbers, but no letters. What can I do?

If you are talking about the serial number, as far as I know serial numbers are entirely numeric so there is no need to enter letters. Maybe you are using the incorrect code.
To locate the serial number:
http://helpx.adobe.com/x-productkb/global/find-serial-number.html

I have an Ipad2 and installed the Jeppesen Mobile TC (aeronautical Charts) I am afraid if I make the upgrade to OSI5 I will lose the license of the Jeppensen Mobile TC,, any help or comments about it,, thanks

I have an Ipad2 and installed the Jeppesen Mobile TC (aeronautical Charts) I am afraid if I make the upgrade to OSI5 I will lose the license of the Jeppensen Mobile TC,, any help or comments about it,, thanks

Being an iOS developer, I can tell you that iOS. 7 compatibility for iPad came later in the beta process.
Therefore there wa less time to test iOS 7 on iPad. My suggestion to you would be to wait until Apple refreshes the iPad line before you update. At that point they will most likely release an iOS 7 update optimized for iPad.
With that said they are many people running iOS 7 on their iPads without issue.
Remember, this is a help forum. No one posts success stories here.

Hi sir i have revoked the distribution certificate , and in one of my iPhone app i had used the same certificate if i will upload the next version of same app then will it create any problem or with the new certificate i can upload my next version of myap

hi sir i have revoked the distribution certificate , and in one of my iPhone app i had used the same certificate if i will upload the next version of same app then will it create any problem or with the new certificate i can upload my next version of myapp or not plz tell me as soon as possible

Sounds like you need to ask your question in the developers forums.

Thunderbird is locking up on a message and I have to delete it on Bellsouth otherwise it will download the same email over and over. How do I fix?

It started a couple of weeks ago. I noticed one email being downloaded several times. After checking a lot of things I deleted the e-mail on Bellsouth and Thunderbird then downloaded all of my e-mails. Over time it has started to do this several times in one batch of e-mails. The downloading bar will say it's down loading 1 (or whatever the number is) of say 71 messages. It may download 1 or more then it stops downloading. I go into Bellsouth and delete the last message downloaded and hit Get Mail in Thunderbird to start the process over.
If I don't delete the last e-mail downloaded when I hit Get Mail Thunderbird will download the same e-mail again and stop. Some times it will start a download and work for an extended time and then stop the download without downloading a single e-mail.

That sounds like an anti virus choking on a mail. Norton is fond of doing this, but it is not alone.
Restart the operating system in '''[http://en.wikipedia.org/wiki/Safe_mode safe mode with Networking]'''. This loads only the very basics needed to start your computer while enabling an Internet connection. Click on your operating system for instructions on how to start in safe mode: [http://windows.microsoft.com/en-us/windows-8/windows-startup-settings-including-safe-mode Windows 8], [http://windows.microsoft.com/en-us/windows/start-computer-safe-mode#start-computer-safe-mode=windows-7 Windows 7], [http://windows.microsoft.com/en-us/windows/start-computer-safe-mode#start-computer-safe-mode=windows-vista Windows Vista], [http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/boot_failsafe.mspx?mfr=true" Windows XP], [http://support.apple.com/kb/ht1564 OSX]
If your mail download in this safe mode then look to your anti virus and disable email scanning.

Error: Could not continue scan with nolock due to data movement, DBCC proccache will clear the probelm

SQL Server: 2008 R2 SP2
Before describing my problem, I have gone via the forum, there is no view or functions inside my stored procedure
When running a particular stored procedure inside crystal report, the error " Could not continue scan with nolock due to data movement" comes once every few weeks. After I clear the query cache plan, it works again for few weeks and the problem
comes again. During these few weeks, there is no restart or query plan clearing.
If I run the stored procedure inside SSMS, where the SQL statement is copied and pasted from SQL profiler during crystal report run, there is no error.
I discovered running in SSMS and crystal report generate 2 different query plans even I copied the SQL from SQL profiler, I have actually saved the query plans. Unfortunately, this forum does not accept attachments, or otherwise I will post my query plans
here.
There is one thing I notice about the query plan is during nested loop operation, there is a warning "no join predicate". I don't use any views or UDF in the statement, nor did I use pre-1992 ANSI join syntax. However, I did use table variables.
My guess is whether this will cause " Could not continue scan with nolock due to data movement", after I clear the cache, I run crystal report again, and I look at the plan again, the "nested loop no join predicate" warning is gone.
Running this stored procedure took 1 second maximum, even when this error is popping up, it pop up within 1 second.
DBCC checkdb has been run
The same stored procedure running by crystal report in a SQL 2008 (non r2) live environment has no problems, so I am thinking this is R2 specific problems.
The "nested loop no join predicate" error SQL statment is below, no views, no udf, but table variables
INSERT @ChequeAccount
SELECT       PS.PaySummaryID, PS.EmployeeID, PS.CostCentreID,
           (PS.GrossPay   + PS.LumpSumA + PS.LumpSumB   + PS.LumpSumD+ PS.LumpSumE+ PS.ETP+ PS.PaymentsAfterTax   - PS.DeductionsAfterTax
- PS.Tax- PS.ETPTax   + PS.TaxRebate) * -1 AS Amount,
           CGLM.GLAccountID
FROM Pay_Summary PS JOIN Input_Sheet ISH ON PS.InputSheetID = ISH.InputSheetID AND ISH.PayrollID = @binPayrollID
AND PS.PaySummaryID NOT IN (SELECT PaySummaryID FROM @ChequeAccount)
JOIN Payroll P ON P.PayrollID = ISH.PayrollID AND P.EmployerID = @binEmployerID
JOIN CustomGLFixMapping CGLM ON CGLM.EmployerID = P.EmployerID AND CustomGLFixMappingNameID = 1 AND CGLM.CostCentreID IS NULL

The error Could not continue scan with nolock due to data movement can occur when you use the NOLOCK table hint, or use the command SET TRANSACTION ISOLATION LEVEL READ UNCOMMITTED. That is, so-called dirty reads. The error is not related to the
query plan per se, but when scanning a table, the storage engine will use an IAM scan rather than following the clustered index. If there is simultaneous activity, the storage engine may detect this and abort the operation to avoid returning incorrect data.
Or it may not detect it, and return uncommitted data or fail to return committed data.
All of these effects are transitory and they will not show up when you are alone on the system, only when there is concurrent activity in one or more of the tables in the query.
Using dirty reads is a risky business for the reasons explained above, and it takes careful analysis to understand whether you can live with the errors you can get from a particular query. The error about data movement can be handled: trap the error and
resubmit the query. But what about spurious incorrect results?
If you believe locking to be a problem, you should consider setting the database to READ_COMMITTED_SNAPSHOT
and take out all use of READ UNCOMMITTED/NOLOCK. When the database is in READ_COMMITTED_SNAPSHOT, readers read from the snapshot and only see committed data without blocking writers. This has some other effects like requiring a bigger tempdb,
and there is a risk for other types of concurrency errors, but they tend to be smaller risks.
I discovered running in SSMS and crystal report generate 2 different query plans even I copied the SQL from SQL profiler,
This is because SSMS by default runs with SET ARITHABORT ON. I discuss this in more detail in this article on my web site:
http://www.sommarskog.se/query-plan-mysteries.html
However, as I said, this problem is not related to the query plan as such, although some query plans are more susceptible to this error than others. (All plans are suscpeitble to produce incorrect results).
Erland Sommarskog, SQL Server MVP, [email protected]

How to configure the zxp so that it will place the related files for the panel in specific folder other than the usual 'C:\Program Files (x86)\Common Files \Adobe\CEPServiceManager4\extensions\' folder ?

Hi,
I am Working on a panel for Adobe Premiere pro CC, Now we got a panel set up which will install all the related folders and files which are part of the Extension content folder in the
C:\Program Files (x86)\Common Files \Adobe\CEPServiceManager4\extensions \Panel\CONFIG folder. But we need to change this location to C:\Users\USER\APPDATA folder or any other user specified folder during installation itself.
Is there any way to do this from extension builder?
Thanks and Regards,
Anoop NR

Thanks guys,
Got it !! Hybrid extensions.
I am using Adobe Extension builder 3 in Eclipse to code and create the zxp for Premiere pro panel.
Seeing the hybrid extension part in HTML Panels Tips: #10 Packaging / ZXP Installers | Photoshop, etc. I have added a hybrid extension panel using the bundle manifest editor in the extension builder. it creates an mxi file automatically with all the properties, I have to change the maximum host version number in the mxi file in order to make the extension work in the Premiere pro CC 2014. Using the Hybrid option in the Bundle manifest editor we can choose a set of folder paths for placing the files during installation itself and later can be used using 'csInterface.getSystemPath(SystemPath.CODE)' from javascript functions to modify them.
Thanks for your relpies,
Anoop NR

Can I simply swap the power lead over & it will function the same?

Can I just use a UK plug on the EU item? I have an Apple airport extreme 5th gen MD031Z/A which I used during my time in Germany. I was just wondering if it will work the same in the UK, if I simply replace the European power cord with a UK figure 8 power cord?
Are the MD031Z/A (EU version) and the MD031B/A (UK plug) exactly the same? Apart from the power supply?
I just don't want to damage the unit by swapping the cord?
Thanks

The AirPort Extreme will run on 100-240 Volts and 50-60 Hz, so power wise, it will work just about anywhere in the world if you have the right power adapter or power cord for the wall sockets where you will be going.
Last time I checked the wireless standards were the same in the UK and the rest of Europe, except Switzerland, so things should be fine in that regard.
A bit more information here:
http://store.apple.com/us/question/answers/readonly/im-checking-the-uae-online-s tore-i-see-it-listed-twice-one-carrying-model-md031b-the-other-is-md031z/QXD4CC2 UFJ7JYKT27

When trying to install ios5 on my iphone, I get error message that there is a problem with backup, if I continue with update all data on my phone will deleted. I cancelled the update and phone is fine. Anyone know the cause?

When trying to install io5 on my iphone4 I get an error message during the updtae that there is a problem with backup and if I continue with the update, all the data will be deleted from my phone. I cancelled the update and my phone is fne. Has anyone else experience this? What is the cause/solution?
Yhanks!

DON'T DO IT! Read the threads ... there is a MAJOR problem with updating iPhones 3GS/4 to iOS 5.
Take it to the Apple store and ask them to do it.
I repeat: DON'T DO IT YOURSELF.
(Voice of experience.)

How do I sync iMessages so that when I delete it on one device, it will delete it from the other devices?

I have 3 devices all using the same iCloud account: iPhone 5, iPad 3, and MacBook Pro with Mt. Lion. I want to be able to delete an iMessage on one device and have it automatically deleted from the other devices automatically instead of having to delete the message on all 3 devices. Is this possible? I want it to sync up just like an email account would sync up. Thanks.

You got the gist of it - imessage and email accounts have different supporting "underline". Even some of the mail accounts (POP) do not have that capability. Neither does imessage. What I did is made sure that I receive my imessages to one device only. I do not know if it will work for you. Good luck.

HT4910 My iCloud contact list does not contain all the contacts that are in my phone. If I delete one from my phone it will delete it instantly from the iCloud contacts. But how do I get all those other contacts on my phone to the iCould on my Windows c

My iCloud contact list does not contain all the contacts listed in my iPhone 5S. If I delete a contact from the phone it instantly deletes it from the iCloud on my PC. But my PC iCloud list is lacking many of the contacts on my phone.

And which account did you enter these contacts in?
On My Mac
or
iCloud?

Deleting emails with no subject content will cause the app to close and when returning to the app the previous emails that have been deleted re-appear. This is happening ever time I receive emails with no content. Is this spam and what kind of

Internet protection is the for the iPad if any?

I've been having deleting problems, too, and finally found a couple of fixes here on the message boards. I'll copy and paste them for you. It doesnt fix why it happens, but at least you can delete your emails.
(at least it works so far!)
bigj6360
Level 1 (10 points)
Correct AnswerRe: email message crashes mail on ipad
Jul 9, 2011 5:33 PM (in response to Geoff Gentry)
Hey try this.
Swipe to delete. When you are in either portrait or landscape view swipe from left to right over the message in the inbox listing. That should show a delete option without loading the email. Worked for me.
Eric Ross
SF Bay Area
Level 4 (2,770 points)
Re: email message crashes mail on ipad
Jul 9, 2011 5:42 PM (in response to Geoff Gentry)
You can also do this go into your settings>mail, contacts, calendars then turn off the "load remote images" then try to delete the message.

I just bought a second iPhone 5 for my husband to use. I want to back up my iPhone to iTunes and then download it all to the new iPhone. I will give the older iPhone 5 to my husband and wipe it. How do I do this?

I just bought a second iPhone 5. I want to back up my first one to iTunes and then wipe it so my husband can use it. Then, I want to reload everything to the new iPhone that was on the first one. Advice?

To wipe do this
To wipe phone
Turn off imessage in settings/messages
Turn off Facetime in settings/Facetime
Delete icloud account in settings/icloud
Erase all data and settings in settings/general/reset
Delete the phone from your profile in https://supportprofile.apple.com if you registered your phone there
To backup and restore read http://support.apple.com/kb/ht1766

Deleting the data in the infocube will delete the data in explorer reports?

Similar Messages

Maybe you are looking for