Deleting the Master Data is not possible

hai
Im loaded the Master Data .
I want to delete the Master Data. So how can i delete ??
Im trying to delete Master Data by context menu of the Master InfoObject .But im unable to delete the master data .
I heard that it is big issue.
So what can i do for deleting the master data.
pls tell me
rizwan

hai all
Thanks for quick reply .
I deleted the data from InfoCube and ODS .
Im trying to delete the master data attribute data by context menu of master infoobject . But it is says that "Not all master data can be deleted".
I looked at the help from that message .It says that i need to go SLG1 transaction and then delete like that
But i dont have authorization for that transaction(SLG1).
So plese tell me what i ahve to do for deleting the master data .
txz
rizwan

Similar Messages

I want delete the Master data loads which i have already loaded earlier

Hi BW Guru's,
I want delete the Master data loads.
But i am unable to delete.
is there any option to delete from RSD1
Please send steps

Hi,
If that master data related ifo is present in cube u cont delete master data.
In that case u have to delete req in cube then u can delete
let me know further
*******Asgin Points if usefull***
Cheers,
Satya

How to delete the master data of a Customer created in a SALES AREA?

Hi All,
I've deleted a Customer (master data) by t.code OBR2. But it exists again in its SALES AREA.
Could anyone tell me how to delete it in the sales area too?
Thanks

Hi,
I dont think you can delete a customer. you can market it for deletion in XD06.
for deleting customer master data you have to setup an archiving project.
Also check the similar thread
doubt in obr2
Hope it helps you.
Regards,
Sats.

Deleting the master data

When I tried to load an existing master data object ( 0VENDOR_ATTR), it is showing the following error.
Diagnosis
    The existing DTP requires a serialized update because fields are upda
    non-commutatively during the processing run (for example, MOVE).
    Therefore all new data records that have the same semantic key as
    incorrect records that have not yet been corrected in earlier request
    or earlier data packages of the same request, are filtered out after
    extraction in a special step. In this way the system ensures that
    incorrect data records are not repeated for your changes, which may n
    contain errors themselves.
System Response
    The data record is not updated but is written to an error stack.
Procedure
Correct all incorrect data records and update them using an error DTP.
How to correct 1 million records? and how to use error DTP.. When I right click on the Infooobject and tried to 'DELETE MASTER DATA", it is saying ' all master data cannot be deleted"..
How to procede further...
Thanks
Manu

Hi manorama,
firstly I don't understand why you are posting a second thread regarding this issue...
secondly and as I explained you are pushing your whole PSA data from 0CUSTOMER_ATTR DSource into your vendor master; this means that you'll have duplicate keys (first because you have several requests in your PSA and second, depending on your transformation you may as well have one vendor for different customers...)
Please describe with more details what field from 0CUSTOMER_ATTR you did map to the 0VENDOR key; also the system is telling you that you need to serialize your request regarding the way it is processed in the diag processes; why don't you do so in the DTP settings??
I repeat also and again; your issue as nothing to do with deleting master data....
if you don't cooperate with us you won't get accurate support...
hope this helps...
Olivier.

Unable to delete the Master Data

Hello Gurus--
How to delete the unused MD for an Infoobject,.
Unused MData were in A version in M,P and text tables.
Thru the program "RSDMD_DEL_PARALLELIZER" and "RSDMD_DEL_BACKGROUND" The MD hadn't got deleted.
Scheduled the above programs and checked the logs in SLG1 for both used and unused MD,.
The logs says that
a) Checked,.and I confirm that the unused MD is not present in any targets.
b) MD deletion hadn't happened for my unused MD.
--> The MD is in A version in the M,P, Text tables, if it is in M version these data can be deleted,,
Checked for the same in all the forums .
Couldn't able to find the same.
Very very Ungent sirs' !!!
Regards
Vishwa.

Infoobject --> right clikc --> maintain master data
Select rows u wanted to delete and click 'Delete' icon. And SAVE.
If system prompt u 'some master data cannot be deleted' .. continue with this message.
then goto tcode SLG1-- enter Object: RSDMD and Subobject: MD_DEL and User: ur userID and F8
In the next screen Expand node and dbl click 'Problem class additional information'
This will give u which ever objects using SIDs of this master data.
U should delete this SID according to that list.
Then U should delete particular data from DSO/Cubes.
Once data deleted from cube, then
Use Tcode RSRV -> Tests in Transaction RSRV -> All Elementary Tests -> Transaction Data -> Entries Not Used in the dimension of an InfoCube (Dbl Click)
From the right side window, expand u201CEntries Not Used in the Dimension of an InfoCubeu201D Node &
Enter InfoCube (like 0SD_C01), click u201CTransferu201D
Now, click u201CExecuteu201D (Toolbar)u2026 and the results displayed in the right side window..
Now, click u201CCorrect erroru201D (Toolbar)
Delecion of the master data

Error while deleting the Master data

Hi Friends,
i am getting the below error while deleting the data from a master data:-
The system is unable to delete all of the specified master data,because some of it is still in use. (See log:Object RSDMD, sub-object MD_DEL )
Do you want to delete the data records that are no longer in use?
Could you guide how should i proceed to delete the data.
Regards,
Hirdesh

Hi Hirdesh,
If you are using master data in someother data targets u cant delete master data.So first you have to delete the data in data targets where this particual master data object is used, then remove the data in master data object.
Regards
Prasad

Update the master data by not using RSA1

I am planning to use shortcut of the SAP GUI and pass the tcode with field values.
This is the syntax
*<TCODE><SPACE>FIELD_1=VALUE_1;FIELD_2=VALUE_2.......FIELD_N=VALUE_N;DYNP_OKCODE=OKCODE
Example code
*se38 RS38M-PROGRAMM=rsparam;DYNP_OKCODE=SHOP
For our project I need to pass the field values for tcode RSDMD so that we can skip the first screen which is asking for the infoobject name.
Please let me know how to find the field value for the transaction code RSDMD.
Thanks & Regards
kranthi

Hi Kranti,
i can offer you to get the program that calls the transaction, maybe this helps.
go to trx se93 set the rsdmd transaction, enter and go on !
Regards
Natalia

Deletion of master data for 0CS_ORDER

Hello Friends,
I have a requirement to enhance an IOBJ 0CS_ORDER with Order status values(2 new statues are added). I have done the enhancement part to the extractor in the source system side. Now after replication in BW, to add 2 new IOBJs in CS_ORDER, I need to delete the master data.
When I try to do this, I get the msg that some master data could not be deleted.
This is fine as we have transaction data loaded for large no. of objects which has 0CS_ORDER.
In dev, I have deleted the master data using SE14 for tables P, S , X, T.
My concern is in Production, I have huge volume of transaction data. To transport the changes, I need to delete master data. But this would require deletion of Transaction data from all IP where CS_ORDER is used.
If I do so using SE14, and tranport the changes and later load MD to CS_ORDER. Will this cause INCONSISTENCIES?
What can be other possible ways??
Please share your opinions.
Many Thanks,
VA
Edited by: Vishwa Anand on Sep 2, 2010 5:36 PM

Definitely Yes.
It will damage all the SID connections earlier which this master data had with the other objects likes transactiona objects (ODS, CUBES etc). Even You can not access the data from the cube or ODS where the navigational attributes are flagged for reading.
So do not use SE14 for deletion of MD. This is very specific to use.
You can delete the Master data as long as its not been used in other targets so that you can refill it easily and also there wont be any inconsistencies..
Hope this is clear for you..

Deletion of master data with / without SID

Hi Experts,
Client have requested for master data clean up.
Requirement:
"Several masterdata tables in Production system contain wrong entries. These entries should be cleaned up. The attached Excel contains the keys of the entries to be deleted"
Steps to be taken:
1. emptied/deleted content of all the cube.
2. delete data from master data
Help required:
What will be impact of deleting master data with SID when DSO data is not deleted.
What if i choose without SID option for deletiing master data
Regards
Suresh Kumar

Hi Suresh,
Deleting master data is one critical job and ned to be very care ful.
First try to find out the where used list of that particular IO. delete data from all the CUBEs and DSOs. i don't think without deleting the transaction data from all the objects that you see from where used list, you will be able to delete the maste data.
System doesn't allow you, it will say "Not all selected data is deleted" Some message of this sort when you try deleting the master data.
If you are deleting the TD and master data, why do you need the SID to be spared, delete them too. next time you load the correct master data. the SIDs are again generated.
Go thru the below thread, this gives you lot if info on MD deletion.
[Re: SID Tables]

Getting the error while loading the master data

Hi
i have tried to delete the master data using right click and delete master data, but still there are data.
Now i am trying to load this master data again then i am getting the message "0 from 50033 records"
and data load got failed with error message "master data/text of 0vendor already deleted "
and due to this i could not able to load my other infoprovider (which have 0 vendor).
can any body help me, it very urgent...
thanks and regards
Anupam

Hi Raju,
I assume there are no routines written in the update rules and also you ae directly loading the data from R/3 ( not from any ODS). If that is the case then it could be that, the data maintained in R/3 has overlapping time intervals (since time dependency of attributes is involved). Check your PSA if the same profit center has time intervals which over lap. In that case, you need to get this fixed in R/3. If there are no overlapping time intervals, you can simply increase the error tolerance limit in your info-package and repeat the load.
Hope this helps you.
Thanks & Regards,
Nithin Reddy.

All master data values not shown in query selections

Hi
I have created a query on a BasisCube containing the InfoObject 0FUNC_AREA. I loaded data to 0FUNC_AREA and the cube.
I then created a query on the cube, in which I want to filter on 0FUNC_AREA. However, when I get the list of available values for 0FUNC_AREA not all the values in the master data is shown. It only shows 25 values out of 105.
As a default, the data shown is only the cube data, so I removed the tick in the checkbox: Show only InfoCube data. Still the same.
Then I went to the InfoObject and set the 'Query Def. Filter Value Selection' and 'Query Execution Filter Val. Selectn' equal to 'Values in Master Data'. Still the same.
Then I deleted the contents of the InfoCube. It still shows the original 25 values.
The really strange thing is, that when I go into the selection screen for 0FUNC_AREA in the BEx and limit the shown values to one of the values available in the master data but not shown in the list, it shows the text of the functional area in the limit summary window. But still when executing the limitation, it cannot find the value!!!
The problem is the same in LISTCUBE
I hope some of you can help we with this.
Thanks
/Karsten

Hi Hari
1) Reactivated the master data, said it was already active.
2) Could see a difference between the data contained in cube and the remaining data. Otherwise not.
I deleted cube and master data and reloaded, the problem still persists. I am beginning to suspect a bug in BW.
I have to determine whether I am going to live with it (as it isn't critical, just a nuisance) or create an OSS on it.
Thanks for all the input guys.
/Karsten

Delete unused master data of a characteristic in BW7.30

Hi
I try to delete some master data entries in a characteristic.
Unfortunately I got an error message:
Lock of master data attributes deletion is set.
Then BW 7.30 set an entry for the characteristic in the table RSMASD (Lock Table for Master Data Deletion) and I canu2019t delete the master data.
I try to delete the master data via a job (maintain master data) and manually (select the wrong master data in the table -> delete and save the table), but I get the same error message above.
I also delete all open lock entries in SM12 and try again, but wonu2019t solve the issue.
Can someone explain me why BW 7.30 set the master data lock and how I can delete the unused master date of this characteristic?
Best regards
Tobias

Anyone with a solution for this? We have the exact same problem.
Can the record in RSMASD be deleted?
I created a new InfoObject and inserted a new masterdata text record. Then I tried to delete it immediatly, and i got the same error. If the object is in RSMASD, it gives a shortdump in ST22. If there's no record in RSMASD, then it gives a error (Lock not set...)
Category               ABAP Programming Error
Runtime Errors         SAPSQL_KEYS_NOT_CONVERTIBLE
ABAP Program           CL_RSDMDD_DELETE==============CP
Application Component BW-WHM-DBA
Date and Time          31.07.2013 15:13:50
Short text
     Inconvertible key at an Open SQL work area operation.
What happened?
     Error in the ABAP Application Program
     The current ABAP program "CL_RSDMDD_DELETE==============CP" had to be
      terminated because it has
     come across a statement that unfortunately cannot be executed.
Error analysis
    In the Open SQL work area operation used, the work area in the key part
    must be convertible to a database table.
    For Unicode semantics this means the Unicode fragment views must
    correspond in length to the databse key.
    In non-Unicode systems, both structures must be flat for the length of
    the database key, with the exception of string components. This means
    that the key parts may not contain either references or internal tables.
    In this case the key of the database table has a width of 14 bytes.
Thanks.

Problem with deleting old master Data from 0Material

Hello, we try to delete the master data from 0Material.
But we get the message that some data are used and can not be deleted.
We can see the error message in slg1:
"Master data 000000000100000007 (SID 7) is used in /BI0/HMATERIAL; is not deleted"
"Master data R23188 (SID 5316) is used in /BI0/D0RT_C071; is not deleted"
Can we just clear these tables? Is it enough for resolving the problem?
Thank You.

Hi,
no you just can't "clear" these table unless you want to screw your datawarehouse....
the first message means that the material with SID 7 is used in a hierachy of 0MATERIAL ==> adjust the hierarchy first.
the second message indicates that the material with SID 5316 is used in the ICube 0RT_C07 and you CANNOT delete master data if it is used in other objects.
First run RSRV for this dimension in order to see if the DIMID is really used by the fact table. Perform the following test "Entries Not Used in the Dimension of an InfoCube " with your cube and dim.
if the DIMID is not used then "correct" the error; you'll then be able to delete your SID.
If the DIMID is used then you'll have to delete your cube data if you really want to delete this material; otherwise you'll have to keep it.
Finally rerun you master data deletion.
hope this helps...
Olivier.
Edited by: Olivier Cora on Jul 31, 2008 9:07 AM

Impact on transactional Loads if Master data is not loaded

Scenario for your reference:
The loads to ZPO_LINE from PC3 was failing for past 20 days from The fix was applied on April 21.
I need help to decide the effects of not loading ZPO_LINE for past 20 days. And create a detailed plan for data loads required.
If the master data is not loaded for 20 days will it affect the transaction loads happened during those days?
And how can i find out the impact and correct the transaction data if it does?
Can any 1 help me with this?

Hi,
If i understand your scenario, you have a scenario where the Master data load has not been updated for the last 20days but, the transaction data was loaded without any interruption.
In such a scenario, the Transactional loads will only be affected if there is some field which undergoes transformation after looking up on the master data.
So, first load the master data and run the attrib change run process.
After this, if the transaction data is in full update mode, then you dont need to do anything as data will be refreshed with correct values in the next load.
If delta loads are there, you might need to performa full repair.
Regards,
Rahul

How the master data delta works

hi, experts
i want to know how the master data delta (ale pointer) works? what the principle is? for example, the 0asset_attr datasource has 20 fields, any of the 20 fields changes can triger the delta? if i enhance 3 fields to the asset master data, does the 3 fields change can trigger delta?

Application Link Enabling (ALE) change pointers are configured and used to be able to trigger processing of an outbound process, such as data extraction, and determine only those Master Data records that have changed. This is all done without the need for a program being required to determine deltas.
SAP delivered program, RBDMIDOC runs periodically and deterlines if change pointers have been updated for specific message types. New or modified Master Data records are automatically initiated via ALE. RBDMIDOC references the correct IDoc program for any given type via TBDME (the TBDME table also cross-references message types with the ALE change pointer table) so that the data goes where it should and is processed accordingly. Tcode BD60 is the interface in SAP for maintaining the TBDME table.
When a change is made to the standard content Master Data record, the delta will be identified. Any columns that have been enhanced to the Master Data will not be identified as a delta because enhancements are a post-extraction process and only get updated after the standard content structure has been populated.

Deleting the Master Data is not possible

Similar Messages

Maybe you are looking for