Deleting the middle request in the cube? is it possible?

Hi all,
I have loaded the data into the cube from an ods. But then i found there is duplication of records for month of feb 2008.
And there is 4 request above that.
Can i go ahead and delete the request and reload it again?
Nor if i delete that request, will all my above request will also be get deleted ?
Can anyone pls advice me on this?
Thanks
Pooja

You won't be able to delete the middle request without deleting the latest requests, that is because it will create data inconsistencies.
From your statement, I see that you have monthly loads, if that is the case, do you have any selection if your infopackage to load the data, if you have, I would recommend you to do a selective deletion and and do a full load for the same selection from DSO to cube.

Similar Messages

How to delete the duplicate requests in a cube after compression.

Hi experts,
1. How to delete the duplicate requests in a cube after compression.?
2. How to show a charaterstics and a keyfigure side by side in a bex query output?
Regards,
Nishuv.

Hi,
You cannot delete the request as its compressed as all the data would have been moved to E table ..
If you have the double records you may use the selective deletion .
Check this thread ..
How to delete duplicate data from compressed requests?
Regards,
shikha

Deleting the latest request from info cube.

Hi All,
In our project, we have data from May 2012 to till date. Data is freezed and there is no change of data till May 2014. And there is change in data for current month only ie) June 2014. So i have pulled the full load from May 2012 to May 2014 and loaded in the Info cube.
I am deleting the current month data and loading only the current month data to Info Cube. So i want to delete the current request in the info cube before loading and load only the current month data.
Can you pls guide me how to achieve this through Process chain. I am unable to identify which process type will suit my requirement.
Thanks.

Hello Vincent,
As mentioned by you, that there is no change in data from May 2012 to May 2014, you can keep the request which contains this data(for Example Req1). If Request2 contains data from May 2012 to June 2014 then you need to delete this request i.e Req2 and load only data for June 2014. Later you can follow below mentioned process.
Now coming to option which you are looking for process type to achieve this via process chain, there is a process variant called "Delete Overlapping Request", which is used to delete data from the target based on certain condition depending requirement.
Hope this resolves your issue. Below document explains steps to achieve the same.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/e0431c48-5ba4-2c10-eab6-fc91a5fc2719?quicklink=index&…
Best Regards,
Venu Gopal K

Function Module to delete all the red requests in Info Cube

Dear Friends,
Is there any standard FM which can delete all the red requests in the infocube ?
Thanks & Regards,
Ashutosh Singh

you can use RSDD_INFO_REQUID_DELETE.
you've got to create a program in which you first read table rsbkrequest (where you can find the status of the request)
then you can use these id's in the function module.
as a lead check this paper (other objective but same principle)
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a7ba9523-0b01-0010-18ab-cf8b3b8c374a?quicklink=index&overridelayout=true
M.

How to delete the open requests in the LBWQ

Hi guys ... Can any one let me know how to delete / update the open requests in the queue . I need to delete the Open requests in the LBWQ...we are applying patches and for that we need to delete from LBWQ and RSA7...I guess there is an ABAP report which will deletes the open requests...Can any one let me know that report name please
Thanks in advance...
regards
Edited by: sam on Dec 17, 2007 6:15 PM

If your job control runs fine then best thing is to transfer the records from LBWQ to RSA7 and pull it to BW. If you do this all your delta data is intact and you do not loose any delta data. But if you delete the LBWQ you potentially loose all youre delta data. You can go to LBWE and start the job control and move data to RSA7 and then pull it to BW.
But i am not very clear why you wish to delete this data ? If you do this then better you reinitialize all your delta data by following your normal procedure of filling up the setup tables and then initalizing in BW.

Hi, updated my iphone where in the middle of updated the screen showed i must connect to itunes. after connecting iphone was updated but everything was deleted. was first time on itunes , so have no backup. can i recover my pics and contacts? please help

hi, updated my iphone where in the middle of updated the screen showed i must connect to itunes. after connecting to itunes my iphone was updated but everything was deleted. was first time on itunes , so have no backup. can i recover my pics and contacts? please help

If this has happened more than once the problem is likely on your PC.
See here: http://www.apple.com/support/iphone/assistant/itunes/

In fcp7 there is a "close gap" option so you don't have to highlight and move everything every time you delete a small section in the middle of a video. Is it possible to do this in fcpx? I can't seem to find it...Thanks!

In fcp7 there is a "close gap" option so you don't have to highlight and move everything every time you delete a small section in the middle of a video. Is it possible to do this in fcpx? I can't seem to find it...Thanks!

This isn't the actual clip, I fixed it by highlighting and moving everything over but it'd still be a good thing to know for the future. This is essentially the situation i'm talking about. I would never use it for something this simple, but when more complicated editing is being done it isn't so easy to just move all the clips over.

How to delete unreleased transport request where the objects are locked

Hi Experts,
I was created a transport request, but I am facing some probelms with taht request, now I want to delete transport request. I tried to delete them in SE10, I am getting message that the objects are locked. Please tell me how to delete unreleased transport requests where the objects belong to this transport request are locked.

Hi,
First go to transaction se03 Choose "Unlock Objects (Expert Tool)" option under "Requests/Tasks" and unlock your task,
Than go to se10 and delete what you want.
I hope it helps.
Bulent

How to delete 100+ released requests from the import queue?

Hello
How to delete 100+ released requests from the import queue?
One by one or there is more convinient way?
Thanks

To delete multiple non-imported transport requests, you do the following while in the import queue on STMS:
1) Highlight the status field of the import queue.
2) Sort the import queue by the status.
3) Put your cursor on the first non-imported transport, right-click, and click on Select Block.
4) Scroll down and put your cursor on the last non-imported transport, right-click and click on Select Block. This will highlight all requests from the first one selection to the last one selected.
5) Go to menu option Request > Delete.
If all of the requests in the import queue haven't been imported (no imported, including failed import, requests), you can jump to Steps 3-5.

Program to delete a specific request from a Cube

Hi Everyone,
I've been trying to delete a certain DTP request from a cube but I'm unable to delete it. Is there any ABAP program to delete a specific request from a cube by provinfing requeset ID as the input.
Thanks,
Ram

HI
SE37RSSM_DELETE_REQUESTGIVE YOUR REQUEST NO & INFOCUBE NAME here. and execute.
Table is :RSBKDTP contains DTP and target details.
Hope it helps

Ok. so I updated to iOS 5. Downloaded it from iTunes and all. But in the middle of installing the iOS, i fell asleep. not knowing my computer was at a low battery charge my computer shut down. I did a DFU already but i'm not sure if it the os is complete.

Ok. so I updated to iOS 5. Downloaded it from iTunes and all. But in the middle of installing the iOS, i fell asleep. not knowing my computer was at a low battery charge my computer shut down. I did a DFU already and it worked but i'm not sure if it the os is complete. Is It??

Restore to factory settings. That will use the latest iOS and then restore from a backup.
Never, never, never attempt an update/upgrade on any portable computer device without plugging it into its AC charger.

D2D2T where to put the middle D (on the XSan).

Hi all, for all of those implementing D2D2T what is the datastore used for the middle D.
Assuming the first D is data sitting on your XSan.
Assuming the final T is some kind of tape (library) device.
Where do you build your temporary backup/archive?
We were first thinking (see other posts )of making a virtual tape library on a part of our XSan but we now get some advice to put it on a direct attached raid (attached to the backup server that is).
Anyone want to share their thoughts and experiences.
Peter

I do have a nice harddrive but my projects are huge. What is the backupfile and why is the size not big? It doesn't include the project just where everything is in the project?
I am using one of the fastest firewire 800 drives on the market with a brand new macbook pro with an ssd in it. It's not a thunderbolt drive but I get no lag. And I usually don't even convert my Canon 5D Mark iii footage to prores. I do however have to convert my go pro 3+ black footage or it lags.
I understood the old final cut. I'm just having a harder time with the changes.
When I backup my project, which I backup to another external drive, what do I do to do that? Just drag it? Used to, I did not drag it.
Before this update on final cut pro x, the old way, it would let me right click on the project and save it with it's included events to the other harddrive to back it up.
How does one go about that now? Or is it safe to just drag it?

Why or how could firefox change my proxy settings without me doing anything right in the middle of browsing the internet?

== Issue
==
I have another kind of problem with Firefox
== Description
==
While I was browsing the internet suddenly nothing would happen when I clicked a link. Upon closing and opening firefox and trying to load a web page it said "the proxy server is refusing connection. Firefox is configured to use a proxy server that is refusing connections."
I did manage to fix the problem by changing the proxy settings from manual to auto-detect but what disturbs me is how those settings could be changed without me doing so right in the middle of using the internet. I dont know if its a bug or a security issue but I thought I would let you guys know.
== This happened
==
Just once or twice
== In the middle of browsing the Internet
==
== Troubleshooting information
==
Application Basics
Name Firefox
Version 3.6.7
Profile Directory
Open Containing Folder
Installed Plugins
about:plugins
Build Configuration
about:buildconfig
Extensions
Name
Version
Enabled
ID
Exif Viewer 1.55 true [email protected]
Java Console 6.0.18 false
Java Quick Starter 1.0 false [email protected]
Microsoft .NET Framework Assistant 1.1 true {20a82645-c095-46ed-80e3-08825760534b}
FiddlerHook 2.2.8.2 false [email protected]
Torbutton 1.2.5 true
Modified Preferences
Name
Value
accessibility.typeaheadfind.flashBar 0
browser.places.importBookmarksHTML false
browser.places.smartBookmarksVersion 2
browser.startup.homepage www.google.ca
browser.startup.homepage_override.mstone rv:1.9.2.7
browser.tabs.warnOnClose false
extensions.lastAppVersion 3.6.7
general.useragent.extra.microsoftdotnet (.NET CLR 3.5.30729)
network.cookie.prefsMigrated true
network.security.ports.banned 8118,8123,9050,9051
places.last_vacuum 1279480436
privacy.cpd.cookies false
privacy.cpd.sessions false
privacy.sanitize.migrateFx3Prefs true
privacy.sanitize.timeSpan 0
security.warn_viewing_mixed false
== Firefox version
==
3.6.7
== Operating system
==
Windows XP
== User Agent
==
Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.2.7) Gecko/20100713 Firefox/3.6.7 (.NET CLR 3.5.30729)
== Plugins installed
==
*-Adobe PDF Plug-In For Firefox and Netscape
*Default Plug-in
*Shockwave Flash 10.0 r42
*Windows Presentation Foundation (WPF) plug-in for Mozilla browsers
*Next Generation Java Plug-in 1.6.0_18 for Mozilla browsers
*Npdsplay dll
*DRM Store Netscape Plugin
*DRM Netscape Network Object

Calvin W.:
Your extensions list shows an enabled "Torbutton 1.2.5" extension, so it is possible that that extension is responsible for that change.

Can give me the details how to release the transport request to the qa

can give me the details how to release the transport request to the quality server pr production server
thanks

Hi,
Use transaction SE09. Here select "modifiable" .Then click -Display.
Now you get a list of all requests which can be released.
Locate your request number and drill down. Release the sub-request first and then the main request by selecting and using the "transport" icon.
Muraleedharan.R
091 9880028904

I'm installing java 8 but in the middle I skip the installation because it took so long and now I can't even shut down or cancel the installation.. Please help!

I'm installing java 8 in my macbook pro but in the middle I skip the installation because it took so long and now I can't even shut down or cancel the installation.. Please help!

Hello christine valentina,
Thanks for using Apple Support Communities.
If the failed installation of Java is preventing your computer from shutting down normally, then I'd like you to please first try to force quit the unresponsive installer.
OS X: How to quit an unresponsive application using Force Quit - Apple Support
Cheers,
Alex H.

Deleting the middle request in the cube? is it possible?

Similar Messages

Maybe you are looking for