Deleting the request from DTP of master data.

Hi,
I loaded data i attributes of 0costcenter. But the request was showing me yellow color. Its not been deleted. I deleted it from RSICCONT. But still while running DTP its showing me error as " Request 7.928 is already being processed".
Please tell me some solution as i cant delete the DTP.
Roma

hi
check the links
http://wiki.sdn.sap.com/wiki/display/BI/ChangeStatusofDTPRequest
Unable to delete request from DSO
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a02ba9e7-bb6f-2c10-09b4-e86b9fcbad41?QuickLink=index&overridelayout=true
may help you

Similar Messages

Can we delete the requests from Infoobject master data

Hello all,
we load master data process chains everyday. now when when we right click on the attribute "Manage" then there are lots of requests there.
Can we delete the older requests from there?
Does having lot of requests there slow down the performance?
Thanks in advance

Ravi,
Yes we have transactional data also loaded. So you mean I cannot delete the requests from Infoobject ?
So can we use the given FM and delete master data lets says once a week ?
I am really confused about this. I tried deleting some of the request from ATTR (Right click on attr and then manage -> select request and delete) and it did actually get deleted so was that wrong thing to do ?
Thanks for reply

Problem in deleting the request from ODS......

Hi,
I am not able to delete one INIT request from the ODS. This request was taking long time and eventually it turned to RED. Data was there in PSA but I deleted the request and thought of doing the fresh load .
Problem is that although I have deleted the request from the ODS , it is again coming back to ODS . I have started the fresh load. AS the previous also coming to this ODS its taking long time to load the data.
Can some body let me know how to STOP/DELETE the old request?? I have already turned everything to RED QM status , overall status etc. but still its not getting stoped.
Thanks Jeetu

Hi Jeetu,
Even though u find the job and cancel it or delete it the data load will not stop untill it loads the entire data!
Hope there will be large volume of data !
Until the data load is complete wait and then delete the request and then delete the init and start the fresh load!
I too faced the same issue but i am helpless i could not stop the data load inthe middle!
If you found any solution for this let me also know
Thanks
Ram

How to delete the requests in DTP?

hi all,
here i am unable to delete the requests in DTP...
when i am going to delete the request in DTP it simply showing the error:
*cannot lock request DTPR_488BDVJVHQPUUTT3R383DJ55Q OF TABLE 0MATERIAL for deletion*
could you plz help me on this.....

Hi Kiran,
Please go through this thread. Here the same problem has been discussed it detail.
/message/4419400#4419400 [original link is broken]
Following are the steps mentioned in this thread
1. RSA1 -->Info provider >0Material>Right Click-->Display
2. One screen will come , Select the monitor icon to view that (not the one when you go with Manage of 0Material_attr).
3. In the monitor screen you will see Refresh icon , Refresh that
screen , Now the status will change , after 2 -3 refreshes you
will see the request turning to red.
4. Now go back to the manage tab of the 0Material attribute , You
can delete now.
Regards,
Praveen

Delete red request from dtp in a process chain

Hi all,
I continuously load Data from a DB-Connect DataSource directly in a InfoCube with a Process Chain.
When a Request went red, the Process Chain should just start the next day again an will so do a full update.
But I need to repair or delete the red requst in the DTP before I can use the DTP again. I don´t want to do this manualy.
Has someone an idea how I can handle this. Like delete the red request before starting the DTP...?
Thanks for ideas
Tom

Hi Thorben,
Using table RSBKREQUEST you can write a ABAP Code to check tstate value(its field in rsbkrequest table) i.e. request status, delete the request entery from this table using required validation.
0     New
1     Executable
2     Processed Successfully
3     Processed with Errors
4     Deleted
5     Active
6     Processed, with Warnings
7     Further Processing Started
8     Processed Further
9     Deletion Started
A     Further Processing Terminated
These are the possible values that tstate can have .
Please oblige if its helpful..
Warm Regards,
Rohit Garg

Need help in deleting the requests from DSO

Hi All,
I want to delete the data load requests present in the dso, I cant do that from the manage tab as it is throwing error because of some dump been loaded into it.
Please tell me the tables names which stores these data load requests of the dso's so that I can delete those requests in the backend.
If is there any way to delete these requests or complete data, please let me know. I cant do these operations from the mange tab/delet data tab of dso as it is throwing the error.
Thanks,
vinay.

Hi,
You can delete the Requests form DSO by useing RSICCONT.
Follow bellow steps:
1. Goto SE16.
2. Give the RSICCONT and Click on Technical Contents.
3. Give the DSO name--> Click on Execuit
it will dispaly the number of requests which it exists.
4. Select your request>Select 'Table Entry' Menu> Select 'Delete'
Regards,
Suman.

Deactivate delta update before deleting the request from ODS

Hi all,
Happy New Year wishes to all.
I have a scenario, where I am feeding the data to ODS from flat file and from ODS to Cube. Here ODS is a Data mart. Flat file to ODS full update and ODS to Cube First Initialization and Delta.
I deleted the latest request from ODS, at the I got the message dialog box and it is saying that
Request 98888 already retrieved by data target BWVCLNT
Delta update in data target BWVCLNT must be deactivate before deleting the request
Do you want to deactivate the delta update in data target BWVCLNT?
So I pressed Execute changes, then after I loaded the data in to ODS and when I am trying to load the data into Cube, once I pressed execute button it is displaying the message dialog box like
Delta request is incorrect REQXXXXXXX in the monitor
A repeat needs to be requested
Data target still include delta request REQXXXXX
If the repeat is now loaded, then after the load
There could be duplicate data in the data targets
Request the repeat?
After execute changes it is showing only zero Records only.
What is that mean and why zero records it is displaying instead of delta records.
Anybody faces this type of problem please let me know. This is somewhat urgent to me
Thanks and Regards
Satish Chowdary

Hi Satish,
First Switch off the ODS ( automatic Update of Datatarget ) , though not really necessary. delete the Req from the Infocube, then delete from the ODS . Now delete the Init Req from the Infopackage for datamart infopackage.then Do an Init without datatransfer into Infocube. Later load data into ODS and then go for delta update to Infocube.
I hope this helps.
Thanks,
Krish
Dont Forget to assign Points.
Dude, you just repeated my answer I gave a few hours ago. Are you hungry for points?

Unable to delete the request from ODS

Hi All,
I have loaded a request to ODS from flat file and the load got success, the request is activated and is available for reporting. Now the problem is i want to delete the request, but the request is not deleting.
I tried to delete the request by going in to the cube manage and changed the QM status and the technical status to red and delete, but it is not deleted.
Thanks in advance for your reply

Hi Prem,
If the ods has datamart status & has been used to load data to a cube, then u cant delete the ods request. In this case, first, change the QM status of the request in the cube to red (delete) & then it wud be possible to go with the deletion of ods request.
Also check this thread as well
Request unable to delete from ODS.
Regards,
R.Ravi

Deleting the request from BW is required or not.......?

Hi All,
I am working on FI and PP, I have loaded Master and Transaction Data using the Standard Datasources from R/3 Development System to the BW Dev Standard Data Targets....
In BW Data Targets data is filled with R/3 Development data....
Yesterday we have Configured R/3 Test System to BW Development.....
My doubt is, For to load the R/3 Test Data to BW Development is i have to delete all the Requests in BW Development which were loaded from R/3 Dev....
Other wise directly i can load into BW Dev without deleting previous request....
Please Help me out in this issue...
Your Help will be appriciated......
Regards,
Kiran Telkar

Yah i did Source System -> Check i got the message like this..
 Source system connection SABTEST OK
As i previous message i have loaded Master Data, I got the Error, Check the below long text which it specifies...
Diagnosis
(Blank)
System response
(Blank)
Procedure
 Assign a source system ID to the logical system SABTEST . Administrator
 Workbench > Tools > Assign source system to source system ID.
Procedure for System Administration
(Blank)
When i was trying this My Source System ID and Source System ID fields are Empty....
Do i need to do any settings for this...?
Regards,
Kiran Telkar

HOW TO USE FUNCTION Deletion of Requests from the Change Log IN PRCSES CHAN

Respected all
i used Deletion of Requests from PSA from the prcess chain and found good results, now i have only one request at the psa and thus i am doing good space utililisation. but when i am using Deletion of Requests from the Change Log i am not getting any changes in the request of dso. kindly let me know how to use this 2nd function.
thanks
abhay

Hi Mahodaya,
As per SAp standards its good to delete the requestes that are no longer needed for the delta update and no longer used ffor inti from the change log table and the data is loaded already in to DSO.
Goto RSPC
Click on create New PC -> enter the PC name n long descp
Next we need to define the start process for the PC.Maintain the start variant process.save n come back.
for deletion of change log we have option in the Other BW Processes -> deletion of requestes from change log
Once u select the option we get a dialoge box here we need to create the variant for the process enter the process variant n long descp. cick ok.
Next in the maintenance screen for the deleting the request from change log table will appear.
Enter the selection patterns to which the requestes should be deleted from the change log.
In the maintenance screen, select one or more Data Store objects for which requests are to be deleted from the relevant change log tables under Data Store Object column and select theInfo Area of the corresponding Data Store Objects under Info Area
If you select the first check box exclude selction pattern, this means that del of requests from change log table will be ignored.
or
We can delete the requests which are Older than N-number of days (or) date in the above screen. For this one, enter the number of days (or) date in the filed Older than .
OR
If we want to select the requests with a certain status then we can also do in the above screen. We can select the following status indicators from the above screen.
Delete Successfully Updated Requests Only -This status will delete only requests which
are successfully updated into corresponding Data Store objects.
Delete Incorrect Requests that were not Updated - This status will delete only incorrect requests which are not successfully updated into the corresponding Data Store Objects.
Delete Activation Requests only, No Load requests- This status will delete only the activation requests (requests that begin with ODSR_... ). No load requests are deleted.

Delta Update in data Target Must be Deactivated Before deleting the request

Hi Experts,
I got an error while deleting a request from an ODS target. In breaf Let me explain..
Today one data load got failed. The data source 0CRM_SALES_CONT_I ( CRM Sales Contract : Item ) is updating data to 4 ( Four ) ODS targets.
So I forcefully made the request red to delete the request from the targets. But I unfortunately deleted another request without making it RED, I reconstructed it. Everything is looking fine.
   But the thing is , when I tried to Delete the ERROR request from the other two related Data Targets ( 0CRM_CN2P and   0CRM_CNT1) , I fount these warnings..
                --> Request 140522 already retrieved by Data Target BWPCLNT600
                --> Delta update in Data Target BWPCLNT600 must be DEACT. before deleting the request.
                --> Do you want to DEACTIVATE the Delta Update in the Data Target BWPCLNT600   ?
   I clicked on YES.
I am having doubt, will it make any problem in future ? Or How Can I Resolve this problem   ?
Thanks,
Utpal.

Hi shanthi bhaskar ,
Thank you. But the client no which I have mentioned is not our. That is different, I have given for the example. Bur the DS and ODS name are as it is.
   and Shanthi, Won't be any problem as I got the warning as mentioned above.. ?
Thanks,
Utpal

Unable to delete the Requests in the data target---Process chain

Hello Gurus!
Can anyone plz help me out knowing this issue...
Let me explain the whole scenario:
Like when monitoring the process chains,one of the process chainhas a sequence of variants like:
load info-package1>ODS1 activation>load infopackage2-->load infopackage3..
due to some problems they scheduing it manually.all the infopackages loads data into one ODS1......suddenly info-package3 failed.
so....when i looked into the datatarget ODS1->manage->requests.
i found that the info-pack1 requests status was RED.
info-pack2 requests status was YELLOW.
info-pack3 requests status was RED.
ALL THE THREE R FULL UPDATES ONLY.
so suddenly one of our cologue deleted the all the three requests by making ino-pack2 requests to red.
when we r loading again the ino-pack1 again its failed.we deleted it onceagain(removing the requests from the ods),when we are trying to load ino-pack2 for some priority ,automatically the info-pack1 requests with red were seemed in the ODS.so how to solve this issue and also how to load these three ino-packs..
i hope that all understand the scenario..plz suggest me how to work on it
Thanks in advance!!!
Dilip

Hi,
Your loads are running on back ground you have to kill this porcess in SM50 or SM51 check which are all jobs are running with your user name and ALEREMOTE if jobs are running with ALEREMOTE you can check wether it is your load or some body else in SM37 so kill your jobs in SM50 or in SM51 and make request into RED of your 3 loads, delete the requests from ODS and repeat the loads it will go with out any issues, as i under stood your question when your colegue deleted the request without killing the process he simply made it to red and delete its wrong he has to kill the process and then make it to red.
Regards
Sankar

Unable to delete a request from a Cube which is loaded by Open hub to flat

Hi,
We have one Cube from which we are transferring data to a flat file by open hub.
the DTP for the OPEN HUB is delta DTP.
Now when i am trying to delete a request from Cube its not allowing me.
Its giving error as request is already updated to the target so delete the request from target first.
I tried deleting the open hub request entry from RSBKREQUEST table.
but still its not deleting the request from the Cube.
Can you please help me in solving this problem.
Thanks in Advance,

I think request is having datamart, which is not allowing it to delete.
You can try to reset (delete) the datamart by clicking on it in cube request and then try to delete.
Or if it does not work, you can delete it from RSICCONT table, which will delete the request from cube also.

Delete overlapping requests from cube not working in processchain.

In a process chain, 'deletion of overlapping requests from the cube ' step is used.
Before this step a DTP step runs with a full update to load the cube. This process chain is scheduled every day.
Issue is, the process chain failed at the DTP step and after correcting and repeating, the step got executed.
However, the next step after the DTP,'delete overlapping requests from the cube'
gets executed but without deleting the previous day's request.
In the step details a message that 'No request for deletion were found' can be seen.
Then next day when the DTPstep is executed without any problem the 'delete overlapping requests from cube' step is successful
and the previous requests from cube are deleted.
the deletion selections in the step ' delete overlapping request from infocube' is
Delete existing requests
Conditions:
only delete requests from same DTP
Selections
Same or more comprehensive
Because of this issue on a particular day because of the presence of 2 days requests the data is getting aggregated and shown as double in the reports.
Please help.

Hi Archana,
When you delete the bad request from target and before repeating your DTP in PC, make sure the bad request deleted from table RSBKREQUEST also.
If you find the same request in table, first delete the request from table and repeat the DTP in PC.
Now Delete overlapping step should work.
As this is not the permanent solution, please raise an OSS for SAP
Regards,
Venkatesh

How to delete the request in Direct Update DSO

Dear Gurus,
I have a situation where I have an invalid characteristic loaded into the Direct update DSO. This is related to Spend Performance Management. This DSO is loaded through a data source with the option Without Archive. So, I cant see any request in this DSO. This DSO will then supply data to another DSO which is standard DSO.
The data Activation job in the standard DSO is failing.
My question is I have to delete the request from the Direct Update DSO and then load it to Standard DSO. I have already repaired the data in PSA.
Your Kind help is greatly appreciated.
-Mohan Kumar

You must be using some fill or delete APIs to fill the data in Direct update DSO.You can't create transformation to fill the data in DIrect Update DSO as you do in Standard DSO.You will not see request number under the manage tab for direct update dso for any load.
Whenever you will fill the Direct update DSO next time,previous data gets deleted automatcally. For Direct update DSO there can only be a Full Update.So just load the data using API's and previous data will get deleted automatically
Edited by: shyam agarwal on Mar 2, 2012 7:48 AM

Deleting the request from DTP of master data.

Similar Messages

Maybe you are looking for