Deleting the SWCV in SLD
Hi all,
Plz clarify me how the impact would be when the SWCV is deleted from SLD after the configuration has been done?
Hey
i dont think ur scenarios will work properly if u delete SWCV
thanx
ahmad
Similar Messages
-
SLD deleted and SWCV remaining in IR - what now?
Hello,
strange situation:
There was the idea to build up the SLD new. Don´t ask why...
So the basis guy deleted the old SLD and created a new one. All the content from our own SWCV created there was lost!
Unfortunately we had some SWCV with interfaces developed in IR. The new SLD has now no SWCV for the ones existing in IR. I need now a usage dependency to one of the SWCV from a another one.
As the SWCV get a unique id I think this cannot work any more because the newly created SWCV in SLD will have a nother id. Is the only solution to start in IR from scratch? (New SWCV in SLD -> Import to IR -> Start development again)
Best regards
DirkHi Dirk,
I woult try to find out the database tables where the link between SLD and SWCV is.
If use use SXI_CACHE --> Software Components.
Then F1 on Top - or basis softwarecomponent
Then "Verwendeungsnachweis"
--> Maybe you find the DB-Table
Scan the table via SE16 and make a screenshot to see the actual entries.
After that import a new SWC into IR.
Than scan the DB-table again.
If the is now one more entry, it seems that you found the correct table.
If this works, create another SWC as in your old SLD.
Now look which ID was given by the system.
Try to overwrite now the existing old ID with the new-ID.
Make notices what you have done in the case you have to REDO your work.
Regards Mario -
Error while deleting the business system in SLD
HI
I am trying to delete the business system in SLD and encountering the following error .
if some one has any idea as to why is this error occuring
java.lang.NullPointerException at com.sap.sld.wd.businesssystem.BusinessSystem.removeXIIntegrationServer(BusinessSystem.java:497) at com.sap.sld.wd.businesssystem.wdp.InternalBusinessSystem.removeXIIntegrationServer(InternalBusinessSystem.java:474) at com.sap.sld.wd.businesssystem.BusinessSystemMainView.RemoveOk(BusinessSystemMainView.java:450) at com.sap.sld.wd.businesssystem.wdp.InternalBusinessSystemMainView.wdInvokeEventHandler(InternalBusinessSystemMainView.java:477) at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.invokeEventHandler(DelegatingView.java:87) at com.sap.tc.webdynpro.clientserver.event.CustomEventProcessor.handleServerEvent(CustomEventProcessor.java:45) at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doHandleServiceEvent(WindowPhaseModel.java:361) at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:128) at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:330) at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processPhaseLoop(WebDynproWindow.java:341) at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:152) at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:297) at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:706) at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:660) at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:228) at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:152) at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:56) at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:47) at javax.servlet.http.HttpServlet.service(HttpServlet.java:760) at javax.servlet.http.HttpServlet.service(HttpServlet.java:853) at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:390) at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:264) at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:347) at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:325) at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:887) at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:241) at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92) at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148) at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33) at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged(Native Method) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
Thanks
Nikhilhi Nikhil,
Null pointer errors are difficult to correct as is
If you have imported the BS from some other system make sure the BS has been imported correctly without errors & any Tech systems attached to it exist.
sachin. -
Unable to import the SWCV fom the central sld ?
Hi Guys,
I have connfigured xi for central sld
and when i try to import the swcv from central sld i am getting the message as unable to read the data from the <hostname> : port number
I have given the following in the exchange profile
com.sap.aii.connect.cr.name -- central sld host name
com.sap.aii.connect.directory.name -- sap xi host name
can anybody tell me the values for the above parameters and any help would be really appreciated
LCRSAPRFC and SAPSLDAPI are on the xi server and works fine.
Thanks,
SriniHi Sridhar,
LCRSAPRFC - poinitng to SAP XI server Gatewayhost and Gateway service -- works fine
SAPSLDAPI - pointing to SOLMANGR Gatewayhost and Gateway service -- works fine
I am maintaining the Hostname of the solmagr in SLDAPICUST. can you explain little bit more on the url in sldapicust.
Do you mean i need to give http://hostname:port/sld instaed of just the host name ?
Thanks,
Srini -
Mass deletion of SWCV in ID ?
Hi,
I know how to delete one by one a SWCV in the ID, but is there a mean to do a mass deletion of SWCV in ID ?
I explain my pb: a guy import ALL SWCV of the SLD into ID... Thus we have ours but among hundreds of SAP that we don't use....
Funy game !
Regards.
MickaelHi PT,
In fact, I already deleted one by one all "non-wanted" SWCV in the IR of our PI DEV environment.
It was not really an amazing game... but we did it ! and loose many many many time...
And now, I see that it's the same in our QUA envrionment :-(((
and I presume it will be the same for our pre-prod and then PROD environment... I hope no, but it certainly the same guy who made the same error (several times!).
So I try to find a quick easy solution.
Regards
Mickael -
Deleting the source field in the mapping sector in LSMW....
hi experts...
i ve mapped two souce field in same target str...but i cannot delete the one souce field...how i can delete the one source field....
regards,
velu...IF you have two different Software Component versions.
Then in SLD , you should Create Dependencies/ PreRequesties.
By assigning appropriate depencies and Prerequesties , you can see the object of one SWCV in Other SWCV also.
Lets Say .
A SWCV has
DT
MT
SI
ACTION
B SWCV has
MM
as MM on B SWCV needs to access the Objects(DT,MT,SI,Action) from A SWCV ,
Now on SLD, SWCV A should be add on prerequesties of B SWCV.
or
Now on SLD , SWCV B Should add dependent A SWCV.
Regards
PS -
Steps:- Import SWCV from SLD into Enterprise service Builder
Hi All,
I have created new SWCV in SLD.
What are the STEPS :-mport SWCV from SLD into Enterprise service Builder
Thanks,
AnshulAbhishek,
I am using PI 7.1. And there is no option showing Tools --> Transfer from SLD .
It has only Import Design Objects option.
Please advice.
Thanks,
Anshul -
How to delete a domain from sld
hi,
we have created a domain for testing scenarios in JDI.
Now we are preparing the JDI for actual developement.
So we planned to create a new domain, but in help document we have noticed its not possible to create more than one domain. So we decided to delete the existing domain. But dont know how to do it.
Anybody knows please reply.
Thanks.Hello Abdul..
U can try out the Name Reservation option.
In JDI if u crete any componet then this name space resevation service reserves that name.
after deleting that component also it doesn't allow u to create componets aothat same name.
u have to go to Name Reservation option in sld page and search that name and remove it. this can be done by only Administrative login.
thanks and plz let us know after ur try
Regards
Shobhan -
SWCV in SLD versus Configuration
Dear all,
Although I have assigned our own SWCV to the technical business system in the SLD, this SWCV is not visible on the tab 'Other Attributes' for the corresponding Business System in the Configuration. Moreover, the IDocs imported into the own SWCV are NOT visible in the tab Receiver->Inbound Interfaces and/or Sender->Outbound Interfaces.
Any idea what might be wrong?
Kind regards,
John.Hello John,
it seems that your Technical System has not the necessary relationship to your product. You have to add this first and configure your Business System again.
Then you will see the SWCV under Other Attributes for the corresponding Business System in the Configuration.
Steps to solve your problem:
SLD:
navigate to Technical System --> choose your system
navigate --> Installed Product
press ADD
check the Installed Software Component Versions for your Product
all boxes you need, should be selected (tick)
navigate to Business System --> choose your system
check the Installed Products (must also have a tick)
now you will see the (example)
Installed Products: JohnsProduct
Software Components: BAPI, 1.0 of John.com
MATERIALSTAMM_TO_SUB, 1.0 of John.com
Open Integration Broker and check your system again.
Daniel -
Hi,
we have added one new software component to the product in SLD.
But when defining Process Integration Scenario in ESR for graphical representation, on choosing product...... not able to see newly added SWCV?Kindly guide us?
And also suggest the steps to transport the added newly SWCV to product from SLD to Q system?Hi..
Login to ESR and do the follwoing steps:
1. Go to Environment Tab (top most section)
2. Click Clear SLD Data Cache
A pop up wil lbe displayed saying SLD Data cache cleared .
> But when defining Process Integration Scenario in ESR for graphical representation, on choosing product...... not able to see newly added SWCV?
- Try again. It should show now if the SWCV is created for the particular Product and saved correctly in SLD.
> Suggest the steps to transport the added newly SWCV to product from SLD to Q system
- For PI 7.1 and above
1. Goto IR/ ESR of Q system
2. Right Click on any object and click New
3. Under Work Area - Select Software Component Version
4. Check Import from SLD box and press Display
5. A pop up will display the list of exixting SWCV from SLD.
6. Select your required SWC and press Import.
7. Click Create
For others (3.0 and 7.0) do as mentioned above
IR/ ESR --> Tools --> Transfer from SLD --> Import SWCV --> select your SWC and import
Regards,
Souvik -
Creating SWCV in SLD for downloaded repository objects?
I want to download some SRM xi content from market place, but i guess on download i get the tpz files for repository,
my concern is, if i import these tpz files into the repository, what are the prerequisites?
1. do i need to have these SWCV already in the SLD?
2. how will i create the SWCV in the SLD?
please help..Hello Sudeep,
To import .tpz file in XI you have to put that .tpz file in import directory of your integration server.
D:\usr\sap\PP7\SYS\global\xi\repository_server\import
Then from IR go into Tools->import
It will show all the .tpz ready to import, select the desired and then import.
Here PP7 is my client it may be XI3.0 also for XI3.0
When you will import .tpz file in IR you will find the software component in IR for that .tpz file.
But as of PI 7.0 the SWC will not be created in SLD but you have to create it.
IN PI 7.1 we have concept of autosynchronization between SLD & IR.
Not creating SWC in IR will not cause problem at Run time but you will be in trouble at Run Time.
Thanks
Sunil Singh -
How to delete the members in one dimension use the maxl script
i have question that i want to delete the members in one dimension useing the maxl script, but i do not know how to do it. can the maxl delete the members in one dimension? if can, please provide an sample script, thank you so mcuh.
MaxL does not have commands to alter an outline directly, except the reset command which can delete all dimensions but not members selectively. The best you could do would be to run a rules file (import dimensions) using a file that contains the members you want to keepload rule for the dimension. As typical the warning is to test this first before you do it on a production database
-
I deleted a contact, but they still show up in my text options to send. I would like to delete the contact from my texts too.
No don't restore your iphone. I've done that several times & it has never worked. -I still have deleted contacts in my iphone texts. *However if you do restore it you will not lose all your data, pics, text messages etc if you backup in iCloud. It restores back to original phone. Very nice :). Anyhowwww....
I JUST figured it out!! :))). Remove the contact from recents.
Start a text. You should see the deleted contact. All the way to the right of the name is a symbol. The symbol is a circle with "i" in the middle. Click that symbol then in red lettering click "remove from recents". -
So a while ago when I got my phone I started a new Apple ID account/ iCloud.. Then when my sister got a new iphone I gave her my id to use too. In settings-general-usage it says that my storage is almost full. I then click on manage storage and it shows my phone and my sisters phone and how many gb or whatever. Also it says "last backup failed" and other stuff that's Irrelevant. Now when I click on my sisters phone I have an option to "delete backup" MY QUESTION is if I click the delete backup button will it just delete the iCloud backup off my phone OR will it totally delete everything involving the backup off my sisters phone forever??? Please help! Thank you so much!!!!!
Deleting a backup deletes the backup only from the iCloud storage, not anything on the iPhone.
The iPhone's iCloud backup will be updated at some point - automatically when the iPhone is connected to an available wi-fi network while connected to a power source unless the iCloud backup is turned off on the iPhone. -
Multiple phones share one Icloud account. We use it to schedule jobs and crew leaders read the cloud to get the information of the job that needs to be done. However, we recently had a change of leadership and we think this person might have logged into or put our cloud on his phone to sabotage our business. I changed the password but that didn't fix the situation. I could put a job on the cloud with an old phone that was logged in with the old password and everyone with the new password would still see the job. I have since created a whole new cloud account which seems to have eliminated the "future" issue of sabotage however I would like to completely eliminate that old account...any advise?
Everyone needs to go to Settings (or System Preferences)>iCloud and click 'Delete account' or 'Sign out' as applicable (it's the same thing). Then they can sign into the new account you have created and proceed from there. You can't actually delete the old account from the server but you can just ignore it.
Maybe you are looking for
-
Loadvariablesnum not working on movie clip
I have a movie clip called "popup" on my root timeline. In the popup movie clip, there is a dynamic text box with the variable set as "content". I have an external txt file called "file.txt". On my popup timeline, I have this code: loadVariablesNum (
-
can anybody tell me how to fix this problem every time i put in a credit card it tells me invalid security code no matter what card i use
-
Storage location field in service PR
Hi, I am not able to find the storage location field in service PR generated through PS. This field is available for material component but not for external activity with service. Actully i have a project which have multiple storage location thats wh
-
Filed disabled in receiver agreement
Hi all, When I configure In ID part, swcv of Receiver Interface filed in receiver agreement is disabled. But earlier its working. PFA the screenshot. Please suggest !! Thanks, Arthita
-
Apple. Where has the artwork side pane gone??? Bring it back!!!