Deleting transport request

Hi Folks,
I have a problem in deleting the Transport request . it says Request/task cannot be deleted because it contains locked objects. It contains the dictionary object which has been deleted from the database.
I am trying to create a same object again, when assign a new package it says object is locked under that request..
Please help me to solve this problem.

Hi,
Your transport request may have the locked object. If you delete this directly you will have to confirm for each object. To avoid this you can goto SE03, select unlock object and then give all of your request numbers, which you want to delete, one by one. Once all of the objects are unlocked you can go back to SE09/SE10 and start from the lowest request. First delete contents of that request and then delete the request. Keep on moving up till you have deleted all the requests.
Regards
Rajesh Kumar

Similar Messages

How could we delete transport request and task(the released one)

Hello
We have a released transport task(not request). Transport request is not released.
How could we delete transport request and task(the released one). Namely we would not like to transport it to production

Hi, never delete directly in table.
There are more tables which depends each other...
Here, you can find nice example how to do it: Help on ABAP: Few Tips for Transport Request Manipulation
Using program: RDDIT076 and changing status.

Where i can find the deleted transport request in SAP development system?

where i can find the deleted transport request in SAP development system?

Hi,
When you delete the transport request from SE10 , you can not find the request entry from E070 and E071.
and only local change request are possible to delete from SE10 /SE09
if you are try to delete the change request with target system then it's gives you the error that request cannot be deleted because it contains locked objects.
It's not possible to find out the deleted request from SE10.
regards,
kaushal

How to delete transport request if child request was released

Hi,
By mistake i released child request but not parent request, but i want to delete whole transport request. it is not allowing to delete it, because child request as releaed.
Thanks,
Subbu.

Not good news..check the below link, it says you cannot delete it but maybe you can get an idea..
Deleting a transport request
Delete Transport Request
A similar case..
Re: How to delete the Transport Request release from SE09

How to Recover the Deleted Transport Request

Hi,
How to Recover the Deleted Transport Request (Customizing and Workbench).

Hi Manoj,
those thins will be done by BASIS people.
for more info chekc
How to recover the deleted Request / task...
hope it helps you.
Thanks!

Unable to delete Transport Request which contain locked objects

Hi all,
I need to delete some unusable transport requests but as they contain locked objects, it's not possible to delete them. Release operation is just allowed. After releasing these transport requests, I can not find them any more in queue. Please help to find these transport requests which are released and also provide a solution to delete instead of releasing them.
Thanks in advance,
Sanaz.

Hi,
Thank you for the reply.
1. What do you mean by transport request , Shipment Request, Shipment Order or Tour.
A. I mean requests which can be transported between SAP Systems using TMS (Transport Management System).
2. What are the objects which has been locked and due to that you are facing this problem.
A. There are diffrent object types. For examle some customizing have booen done or SAP Note correction has been implemented, ... Therefore some objects have been locked due to these operations
3. Let's say if it's an freight Unit, then Pls confirm that System dump / error is not the cause for this.
A. I have no idea about "Freight Unit".
Thanks,
Sanaz.

Unable to delete transport request

Hi Team,
The Standalone sandbox with ECC 6.0
Im deleting the transport request , getting error unable to delete the tranport request
Cannot open log:
hostname\sapmnt\trans\log\CC000036.SID.
Kinldy assist me in solving the issue .
Regards
Kumar

Hi,
Are you trying to remove the transport request from the STMS buffer? This only removes the TR from the buffer. It still stays in the system. If you want to delete the transport request altogether then remove from SE01.
Check if the file
hostname\sapmnt\trans\log\CC000036.SID exists. If so, then make sure it has proper authorizations. It should be accessible by <sid>adm and SAPService<SID> if Windows host. Also the trans directory should be accesible by the two users.
Regards,
Srikishan

How to create a deletion transport request without deleting the object.

Hi Experts,
I got a very strange requirement in which i want to delete a object from QA envirement. One way to delete it is delete the object in developement and save it in a transport request. And transport that request to QA.
But can't delete the object from Dev environment. So is there any other way by which i can do this.
Thanks
Yogesh Gupta

Hi,
You need not worry about deleting the objects in QA now.
Have the set of objects which you will not be tranporting to PROD.
After your project is live and during support before handholding to the customer, clean your system DEV,QUA.
Reward Points if Useful.
Thanks,
Anita

Delete Transport request when task is released

Hi All,
Task is already released and i dont want this transport request.
i am trying to delete the transport request from se10. But unable to do that. i have unlocked the object for this request and when i try to delete the object it give an error to sort and compress the task and request.
But when i try for sort and compress for the task its says it is already released. How can we resolve and delete the request.
Please advise.

Is there any way we can delete it from the Object list , only the task is released not the actual request. I can see the entries in E070 table but it not recommanded to delete from this table.
When i try to delete it says the task need to sort and compress, When i try to compress it says the task is already released.
Any how the last option for this problem is to delete from the buffer once its released or delete the entries from the table.
But there must be some way, as only the task is released.
Please suggest.
Thank You,
SK.

Delete transport request

I have a transport request in Dev that has lot of objects but i dont wnat to transport and would like to delete the request itself so that objects are not locked.
Can i delete the request that contains objects - what is the procedure ?

SE03 --> unlock objects --enter subtask ID ..F8
unlock objects --enter task ID ..F8
SE09 --> select subtask ID --> delete icon
select task ID --> delete icon
Edited by: Mr. V on Mar 9, 2009 3:40 PM

Deleted Transport Request by mistake. How to retrieve it back, PLEASE ???

Hi all,
I have deleted a Transport Request from Transport Organizer (SE09) by clicking the 'delete' button by mistake. How can I retrieve/get it back please ?
Thanks in advance.
Regards.

Hi,
We are also facing the same issue,but our Transport Request do not contain any objects. But after deleting that reuqet from the system we are not able to change any queries in the query designer. Please advise.
Thanks.

Retrieve deleted transport request

Dear Freinds,
The transport request for automatic workflow customising i.e. SWU3 is deleted.
Please let me know how to get it back
Thanks and Regards,
Rahul
Moderator message: please have a look in the dedicated workflow forum.
Edited by: Thomas Zloch on Jan 26, 2011 5:24 PM

Hi,
We are also facing the same issue,but our Transport Request do not contain any objects. But after deleting that reuqet from the system we are not able to change any queries in the query designer. Please advise.
Thanks.

How to delete transport request after merging them into one

Hi all, please help me,
We have created 2 transport requests, and we released all the tasks (not request, just tasks) and after that I used "SE03 - Merge Object Lists" to add the objects of the second request to the first one. Then I released the first transport request and transport it to QA.
Now I have the second request which remains in dev and its tasks already released but I don´t need it anymore, when I tried to delete it, I found it cannot be deleted. I cannot release it because the objects have already been transported in the first transport request.
So what should I do to remove the second request? Please help me. Thank you.
Chang

try with Tr SE03
Did you read the question properly ?
He already mentioned that he used SE03.
@OP: Just release the request as thomas mentioned which will not effect the system.

Transaction to delete Transport request

Hi,
Is there any transactions which will delete many Transport request in a single scratch.?.I have some 100 Transport requests which needs to be deleted.
Any inputs on this will be helpful.
Thanks in advance.
Regards,
Raj

hi
good
I dont think there is any such TCode which ll delete your all transport request at a single scratch,you have to delete all your transport request one by one by using SE09 or SE10.
thanks
mrutyun^

Import of maintenance cycle with deleted transport requests in queue

We use Solution manager 7.0 with one maintenance cycle per satelite system landscape.
In this maintenance cycle Regular corrections and Urg. corrections are used.
When a transport request (connected to a correction) is re-imported into the quality assurance system.
The transport request triggers a deletion and "add to buffer" of the same request into the import queue of the production system.
The sequence of the transport in the production queue is correct before the "import all" into production is triggered via the tasklist of the maintenance cycle.
During the "import all" of the maintenance cycle into production the re-imported requests are pushed to the end of the importqueue.
The re-imported transports are imported last in the sequence and left in the importqueue.
The deletion of the request in the import queue causes this problem.
Re-importing a request is sometimes unavoidable (E.g. after a client copy to QAS).
All our satelite systems have a 3-tier landscape with a simple transport routes configuration.
We are looking for a solution to problem, this can be either technical or adjusting procedures.
Kind regards
Gert-jan Meijer

Hi Gert-Jan,
We do the same and we don't face this issue. There is thus a solution.
I never had this case, this might be a parameter in your QAS refresh procedure.
1/ If you empty your production import buffer (meaning you import it all to production) before tacking the production copy you will never have this issue.
2/ If you have some transportd left in the import buffer of production , you have this issue ? I guess this is our case
I will try to reformulate the case.
The refresh of QAS is causing the lost of some customizing that were not yet imported in production but was imported in QAS prior to the refresh of QAS.
When you reimport the "overwritten" transports in QAS after the refresh, this transport is removed from the QAS import buffer and going too the import buffer of production.
A/The same transport is now twice in the import buffer of production ? we don't have this in our landscape (I even think this was not possible)
B/Or in between this transport has been imported in production and thus you are right it falls in the import buffer of production again with another sequence.
Thank you to confirm your case A or B ?.

Deleting transport request

Similar Messages

Maybe you are looking for